Nvidia Shield Sonic Jobs in Usa
545 positions found — Page 25
General Summary of Position
Administers roentgen rays and radioactive substances to patients. Operates x-ray equipment develops film prepare patient's room equipment supplies and medications. Provides patient services using imaging modalities.
Primary Duties and Responsibilities
Prepare room equipment medicine and materials as needed for patients.
Cleans and disinfects x-ray room and equipment.
Prepare barium preparation and other chemical mixture for x-rays.
Prepare patient for x-rays explains procedures transfers patient to table position patient and assists patient at end of procedure.
Follow prescribed techniques in administrating general and specific x-rays. Adjusts equipment determines proper voltage current and desired exposure time. Arranges immobilization and support devices to obtain position of patient and adjusts the lead shield and selects proper film.
Radiographs all incoming patients.
Observes patient and machine during procedures and reports unusual occurrences and records patient's condition.
Routinely maintains stock supplies and performs general office duties such as writing reports.
Assists chief technologist in maintaining radiographic technique charts.
Transports patients
Follow infection control guidelines applicable to the section.
Efficiently takes mobile x-ray unit to patient's room or emergency room.
Works holidays weekends and takes call as necessary.
Performs all related duties as assigned.
Minimal Qualifications
Education
Associate's degree in Radiology required or
Bachelor's degree in Radiology required
Licenses and Certifications
Maryland State License required and
ARRT Registered with ARRT required
Knowledge Skills and Abilities
Ability to comprehend and follow the policies and procedures for Southern Maryland Hospital Center.
Ability to read write and speak or communicate in English to successfully accomplish the essential duties of the position.
Ability to demonstrate ethical behavior that supports the hospital's mission values and commitment to compliance with all federal state and regulatory laws. Inspires trust and exhibits honesty and integrity within the scope of daily activities.
Exhibits professionalism courtesy and excellent customer service while interacting with patients guests and co-workers.
Ability to work effectively with people from a variety of culturally diverse backgrounds.
Ability to maintain patient confidentiality.
Meet hospital guidelines with respect to attendance and punctuality.
Is ready to work at the start of the shift and returns promptly after breaks or lunch period.
Provides notification for absence tardiness and vacation requests according to departmental guidelines.
Reports to work appropriately groomed and in compliance with hospital/departmental dress code.
Wears identification badge while on duty.
Demonstrates the ability to take responsibility for professional development. Updates knowledge and skills to maintain competency.
Radiation Training Competency. Technologist Annual Clinical Competency PACS Application Competency and CR Training competency completed annually.
This position has a hiring range of : USD $29.73 - USD $53.49 /Hr.
General Summary of Position
Administers roentgen rays and radioactive substances to patients. Operates x-ray equipment develops film prepare patient's room equipment supplies and medications. Provides patient services using imaging modalities.
Primary Duties and Responsibilities
Prepare room equipment medicine and materials as needed for patients.
Cleans and disinfects x-ray room and equipment.
Prepare barium preparation and other chemical mixture for x-rays.
Prepare patient for x-rays explains procedures transfers patient to table position patient and assists patient at end of procedure.
Follow prescribed techniques in administrating general and specific x-rays. Adjusts equipment determines proper voltage current and desired exposure time. Arranges immobilization and support devices to obtain position of patient and adjusts the lead shield and selects proper film.
Radiographs all incoming patients.
Observes patient and machine during procedures and reports unusual occurrences and records patient's condition.
Routinely maintains stock supplies and performs general office duties such as writing reports.
Assists chief technologist in maintaining radiographic technique charts.
Transports patients
Follow infection control guidelines applicable to the section.
Efficiently takes mobile x-ray unit to patient's room or emergency room.
Works holidays weekends and takes call as necessary.
Performs all related duties as assigned.
Minimal Qualifications
Education
Associate's degree in Radiology required or
Bachelor's degree in Radiology required
Licenses and Certifications
Maryland State License required and
ARRT Registered with ARRT required
Knowledge Skills and Abilities
Ability to comprehend and follow the policies and procedures for Southern Maryland Hospital Center.
Ability to read write and speak or communicate in English to successfully accomplish the essential duties of the position.
Ability to demonstrate ethical behavior that supports the hospital's mission values and commitment to compliance with all federal state and regulatory laws. Inspires trust and exhibits honesty and integrity within the scope of daily activities.
Exhibits professionalism courtesy and excellent customer service while interacting with patients guests and co-workers.
Ability to work effectively with people from a variety of culturally diverse backgrounds.
Ability to maintain patient confidentiality.
Meet hospital guidelines with respect to attendance and punctuality.
Is ready to work at the start of the shift and returns promptly after breaks or lunch period.
Provides notification for absence tardiness and vacation requests according to departmental guidelines.
Reports to work appropriately groomed and in compliance with hospital/departmental dress code.
Wears identification badge while on duty.
Demonstrates the ability to take responsibility for professional development. Updates knowledge and skills to maintain competency.
Radiation Training Competency. Technologist Annual Clinical Competency PACS Application Competency and CR Training competency completed annually.
This position has a hiring range of : USD $29.73 - USD $53.49 /Hr.
Job Title– Electrical Engineer (DRE)
Location: Novi, Michigan, USA
Job-Type: Full-Time
Job Summary
The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.
Key Responsibilities
1. Component Design and Development
- Design and develop all EDS components including:
- Shields
- Troughs
- Grommets
- Connectors and terminals
- Power distribution components
- Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.
2. Technical Specification & Sourcing Support
- Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
- Support the quotation and sourcing process for EDS components.
- Work closely with suppliers to ensure components meet cost, timing, and quality targets.
3. Standards and Component Library Development
- Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
- Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.
4. Cross-Functional Collaboration
- Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
- Foster a collaborative, high-performance engineering culture within the team.
5. Verification and Validation
- Conduct virtual simulations and physical testing for component verification.
- Participate in field testing and product validation activities to confirm performance and reliability.
6. Compliance and Safety
- Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
- Apply Six Sigma methodologies to improve product quality and solve engineering problems.
7. Manufacturing and Production Support
- Contribute to the design and development of production facilities for Scout electric vehicles.
- Support the transition of components from development to mass production launch.
8. Continuous Improvement
- Monitor consumer experience and feedback to identify potential system improvements.
- Proactively recommend enhancements to EDS systems and components.
Required Qualifications
Education
- Bachelor’s or Master’s degree in:
- Electrical Engineering
- Mechanical Engineering
- Systems Engineering
- Or a related engineering field.
Experience
- Minimum 5+ years of experience in:
- Electrical wire harness design
- Power distribution components design and release
- Automotive product development processes including design, testing, and production launch.
Technical Skills
- Strong expertise in:
- Wire harness component design
- Power distribution systems
- Six Sigma problem-solving methodology
- Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.
Job Title: EDS Component Design Engineer
Location: Novi, MI
Role Overview
We are seeking an experienced EDS Component Design Engineer to lead the design and development of electrical distribution system (EDS) components for next-generation electric pickup trucks and rugged SUVs. The role will involve full lifecycle responsibility from concept design through validation, testing, and manufacturing launch.
The ideal candidate will have strong expertise in wire harness components and power distribution systems, working closely with cross-functional teams including engineering, purchasing, finance, and suppliers to deliver high-quality automotive components.
Key Responsibilities
- Design and develop EDS components including shields, troughs, grommets, connectors, terminals, and power distribution components.
- Support development from concept (clean sheet design) through virtual validation, testing, sign-off, and manufacturing launch.
- Collaborate with purchasing and finance teams to create technical specifications for sourcing and supplier quoting.
- Develop and maintain a standard library of core EDS components aligned with global automotive standards.
- Work closely with VW Group module owners and suppliers to define and release wiring and power distribution components.
- Perform virtual and physical verification testing, including field testing.
- Ensure compliance with safety standards and U.S. regulatory requirements.
- Contribute to production facility design for electric trucks and SUVs.
- Manage supplier deliverables to meet cost, quality, and program timing targets.
- Identify opportunities to improve system performance and consumer experience.
Required Qualifications
- Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Systems Engineering, or related field.
- 5+ years of experience in automotive wire harness or power distribution component design.
- Strong expertise in EDS component design and release processes.
- Experience working across complete product development lifecycle (design, testing, launch).
- Knowledge of Six Sigma engineering methods for design and problem solving.
- Familiarity with CAE tools or computer-aided engineering environments.
- Strong collaboration skills with cross-functional teams and suppliers.
Preferred Skills
- Experience working in electric vehicle platforms or advanced automotive programs.
- Knowledge of automotive electrical architecture and power distribution systems.
- Ability to work in fast-paced product development environments.
We’re seeking an experienced Electrical Engineer to support design, engineering change control, and build activities for complex semiconductor capital equipment. The role demands hands-on ownership of cable harness design, schematic development, documentation, and cross-functional coordination through formal change processes (ECO/ECN/VPR/QN).
Key Responsibilities
- Design & Documentation
- Develop and update electrical schematics, wiring diagrams, and cable harness designs using Pro/ENGINEER (Pro‑E/Creo).
- Create and maintain BOMs, part lists, and drawing packages; ensure drawing readability and GD&T awareness for electrical interfaces.
- Review, interpret, and redline engineering drawings;
- Change Control & Configuration Management
- Initiate and process ECO (Engineering Change Orders), ECN (Engineering Change Notices), VPR (Vendor Part Requests/Reviews), and QN (Quality Notifications) within Agile PLM and Windchill.
- Manufacturing & Onsite Support
- Provide onsite build support for semiconductor equipment—troubleshoot wiring issues, connector pinouts, interlocks, and power distribution.
- Collaborate with assembly teams to resolve design-for-manufacture (DFM) and design-for-service (DFS) concerns.
- Quality & Problem Solving
- Lead root cause analysis using structured problem-solving (8D, Fishbone, 5 Whys) and implement robust corrective/preventive actions.
- Address QNs, drive closure with measurable effectiveness; improve harness reliability and EMI/EMC performance where applicable.
Required Skills & Tools
- Electrical Design: Cable harnessing, wire routing, connector selection, grounding, shielding, safety interlocks.
- Schematics & CAD: Pro‑E/Creo for schematics and harness drawings; familiarity with ECAD–MCAD collaboration.
- PLM & PDM: Agile PLM and Windchill for change control, releases, and configuration management.
- Change Processes: Hands-on with ECO, ECN, VPR, QN workflows.
- Documentation: Strong drawing reading, redlining, revision control, and release practices.
- Problem Solving: Proven track record of resolving build issues quickly and permanently;
- Communication: Clear, concise communication with shopfloor teams and engineering stakeholders.
Nice-to-Have:
- Experience with semiconductor equipment (vacuum systems, gas boxes, RF/power distribution, motion control).
- Exposure to EMC/EMI, safety standards (e.g., UL/CE), and industrial connectors
- Knowledge of DFM/DFS, Lean manufacturing, and design validation processes.
- Vendor interaction for harness manufacturing and first article inspection (FAI).
Behavioral Competencies:
- Ownership & accountability for deliverables and release quality.
- Attention to detail with strong configuration discipline.
- Onsite agility—hands-on, collaborative, and proactive.
- Structured problem solving and continuous improvement mindset.
Job Title: Radiochemist I / II
Employment Type: Full-Time
Overview
A growing organization in the medical device space is seeking a Radiochemist I/II to join its Radiochemistry team. This role supports production-scale radiochemistry operations, ensuring safe and efficient manufacturing of isotope products while contributing to process optimization, technical troubleshooting, and regulatory compliance.
Key Responsibilities
- Perform radiochemistry production procedures safely and efficiently in support of isotope manufacturing operations.
- Serve as a technical resource for assigned isotope product lines, helping ensure supply continuity and process performance.
- Execute and optimize complex radiochemical procedures including solution preparation and ion separation techniques.
- Coordinate production schedules for high-activity materials to support internal and external customer orders.
- Perform radioassay procedures using specialized instrumentation such as ion chambers, liquid scintillation counters, beta/gamma counters, alpha counters, HPGe detectors, and analytical balances.
- Maintain accurate inventory records for radioactive and non-radioactive materials.
- Support validation and qualification of new isotope suppliers and raw materials.
- Develop and implement improvements to radiochemical purification processes and controlled procedures.
- Maintain and operate laboratory equipment including calibration, cleaning, and contamination control.
- Collaborate with Health Physics teams to improve shielding, workflow, and radiation handling practices in accordance with ALARA principles.
- Assist with cross-training and competency development within the department.
Qualifications
- BS or MS in Chemistry, Radiochemistry, or Chemical Engineering.
- 2–5 years of relevant laboratory or radiochemistry experience for Radiochemist I.
- 5+ years of relevant experience for Radiochemist II, including the ability to independently solve technical challenges and support team members with complex chemical questions.
- Experience working with pipettes, analytical balances, and radiochemical laboratory equipment.
- Ability to safely operate hot cells, gloveboxes, or fume hoods without contaminating equipment.
- Strong troubleshooting, problem-solving, and critical thinking skills.
- Excellent verbal and written communication skills.
- Proficiency with Microsoft Office tools.
- Ability to work independently and collaboratively in a team environment.
Additional Details
- Onsite role in the Los Angeles area.
- Occasional travel between nearby facilities may be required.
Job Title– Electrical Engineer
Location: Novi, Michigan, USA
Job-Type: Full-Time
Job Summary
The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.
Key Responsibilities
1. Component Design and Development
- Design and develop all EDS components including:
- Shields
- Troughs
- Grommets
- Connectors and terminals
- Power distribution components
- Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.
2. Technical Specification & Sourcing Support
- Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
- Support the quotation and sourcing process for EDS components.
- Work closely with suppliers to ensure components meet cost, timing, and quality targets.
3. Standards and Component Library Development
- Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
- Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.
4. Cross-Functional Collaboration
- Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
- Foster a collaborative, high-performance engineering culture within the team.
5. Verification and Validation
- Conduct virtual simulations and physical testing for component verification.
- Participate in field testing and product validation activities to confirm performance and reliability.
6. Compliance and Safety
- Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
- Apply Six Sigma methodologies to improve product quality and solve engineering problems.
7. Manufacturing and Production Support
- Contribute to the design and development of production facilities for Scout electric vehicles.
- Support the transition of components from development to mass production launch.
8. Continuous Improvement
- Monitor consumer experience and feedback to identify potential system improvements.
- Proactively recommend enhancements to EDS systems and components.
Required Qualifications
Education
- Bachelor’s or Master’s degree in:
- Electrical Engineering
- Mechanical Engineering
- Systems Engineering
- Or a related engineering field.
Experience
- Minimum 5+ years of experience in:
- Electrical wire harness design
- Power distribution components design and release
- Automotive product development processes including design, testing, and production launch.
Technical Skills
- Strong expertise in:
- Wire harness component design
- Power distribution systems
- Six Sigma problem-solving methodology
- Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.
We are looking for a CDL A Truck driver to run with Copeland TruckingSolo24% of linehaul revenue, 50% tarp and stop payMust have flatbed experience, oversize loads on flatbed, step-deck, double drop and stretch trailersRunning within 1000 mi radius of Oklahoma City.
Out up to 3 days per trip.Sign on Bonus availableWeekly PayrollManual and Automatic transmissions, trucks have refrigerators and invertersBlue Cross Blue Shield (co pays 1/2) , Dental, VisionRequirements21 years or olderCDL A, 6 Months of ExperienceMust have flatbed experience, oversize loads on flatbed, step-deck, double drop and stretch trailersQualified applicants with arrest and conviction records will be considered for employment pursuant to applicable federal, state, and local laws.
The Continuous Improvement Engineer is responsible for reviewing and monitoring production processes to determine corrective actions within the Pontiac facility.
Responsibilities:
- Review and analyze production processes to identify opportunities for improvement and recommend corrective actions.
- Evaluate plant layout to ensure an efficient manufacturing process and implement improvements in coordination with management.
- Conduct time and capability studies on existing processes, considering tooling, equipment, personnel, material flow, and handling methods.
- Apply Lean methodologies, such as poka-yoke, to eliminate waste and enhance operational efficiency.
- Identify root causes of issues using tools like fishbone diagrams and propose corrective, preventive, and permanent solutions.
- Plan and lead continuous improvement projects, defining scope, required resources, budgets, and project timelines using Gantt charts, Kanban boards, and other visualization tools.
- Collaborate with engineers, plant leads, and key personnel to develop solutions based on study findings and industry best practices.
- Conduct cost-benefit analysis for projects, evaluating ROI and expected performance improvements pre- and post-implementation.
- Document all project phases, including KPIs, costs, cycle times, and alignment with business objectives.
- Develop and implement quality initiatives, including preventative maintenance audits and gauge repeatability and reproducibility techniques.
- Lead root-cause analysis meetings to address quality defects, using data on equipment inefficiencies, downtime, and product defects to drive solutions.
- Act as a liaison between plant leads, operators, and management to ensure effective communication and a culture of continuous improvement.
- Encourage plant personnel to contribute improvement ideas through forms and weekly discussion meetings.
Minimum Requirements:
- Bachelor’s Degree in Engineering an Master’s degree preferred.
- Bilingual proficiency in English and Spanish.
- Ability and desire to work on-site, in-office at our Pontiac, IL location 100%.
- Basic knowledge of manufacturing processes and continuous improvement principles.
- Strong analytical and problem-solving skills.
- Ability to multi-task in a fast-paced and changing environment.
We Offer:
- Competitive compensation.
- The ability to become a part of an industry-leading dynamic team with a high focus on delivering results and continuous improvement.
- 401(k) plan through Fidelity, with a generous company match; 100% vested immediately upon contributing and no waiting period to start participating.
- Paid Holidays and Paid Time Off with the option to cash out unused PTO every year.
- Blue Cross Blue Shield medical insurance plans, along with dental and vision benefits.
- Opportunities for career development and advancement; enhance your technical, specialized knowledge and gain new skills through promotions from within.
Key Responsibilities
Performs Methods Engineering analysis including process design, time and motion studies.
Participates in I.E. projects and programs within areas of responsibility.
Assists in the implementation of these projects into business with quality tools, supporting processes and ongoing measures for success.
May provide cost analysis and return on investment calculations associated with project selection.
Conducts ergonomics / human factors evaluations, recommends and implements improvements to work area designs.
Develops and implements manufacturing facility design of plant layout, material handling systems, material staging and warehousing as desired.
Supports new products introductions by providing routine PLC/ePLC deliverables such as line side and floor stock set up, introduction of new hand tools and manufacturing line set up.
Serves as a role model and sets the example, whose behavior is emulated by other engineering team members. (Safe behavior, follow proper protocols and procedures, including core values).
Calculates and maintains capacity data for materials processing, people, space, and equipment associated with production. Provides guidance to manufacturing and logistics related to effective and efficient use of assets and production processes.
Establishes standards and procedures for assigned areas of responsibility.
Other Requirements:
This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.
Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.
