N Able Take Control Agent Jobs in Usa
17,162 positions found — Page 4
C
Border Patrol Agent - Entry Level
✦ New
Salary not disclosed
Job Description
Border Patrol Agent (BPA) GL-5/7 grade levels /n/n
NEW RECRUITMENT AND RETENTION INCENTIVES!
/n/n
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
/n/n
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required.
/n/n
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
/n/n
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
/n/n
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.
/n/n
Salary and Benefits
/n/n
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
/n/n
- GL-5/GL-7 $49,739 - $89,518 per year
/n
/n
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
/n/n
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
/n/n
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
/n/n
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
/n/n
Duties and Responsibilities
/n/n
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
/n/n
Typical assignments include:
/n/n
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
/n/n
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
/n/n
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
/n/n
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
/n/n
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
/n/n
Qualifications
/n/n
You qualify for the GL-5 grade level if you possess one of the following:
/n/n
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
/n/n
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
/n/n
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
/n/n
You qualify for the GL-7 grade level if you possess one of the following:
/n/n
Experience: One year of specialized work experience that shows you have the skills necessary to:
/n/n
- Make sound judgments and decisions in the use of firearms.
/n/n
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
/n/n
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
/n/n
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
/n/n
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
/n/n
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
/n/n
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
/n/n
/n/n
Other Requirements
/n/n
Citizenship: You must be a U.S. Citizen to apply for this position.
/n/n
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
/n/n
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
/n/n
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
/n/n
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
/n/n
/n/n
How to Apply:
/n/n
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
/n/n
You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
/n/n
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
/n/n
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Border Patrol Agent (BPA) GL-5/7 grade levels /n/n
NEW RECRUITMENT AND RETENTION INCENTIVES!
/n/n
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
/n/n
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required.
/n/n
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
/n/n
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
/n/n
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.
/n/n
Salary and Benefits
/n/n
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
/n/n
- GL-5/GL-7 $49,739 - $89,518 per year
/n
/n
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
/n/n
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
/n/n
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
/n/n
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
/n/n
Duties and Responsibilities
/n/n
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
/n/n
Typical assignments include:
/n/n
- Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
/n/n
- Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
/n/n
- Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
/n/n
- Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
/n/n
- Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
/n/n
Qualifications
/n/n
You qualify for the GL-5 grade level if you possess one of the following:
/n/n
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
/n/n
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
/n/n
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
/n/n
You qualify for the GL-7 grade level if you possess one of the following:
/n/n
Experience: One year of specialized work experience that shows you have the skills necessary to:
/n/n
- Make sound judgments and decisions in the use of firearms.
/n/n
- Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
/n/n
- Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
/n/n
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
/n/n
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
/n/n
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
/n/n
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
/n/n
/n/n
Other Requirements
/n/n
Citizenship: You must be a U.S. Citizen to apply for this position.
/n/n
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
/n/n
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
/n/n
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
/n/n
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
/n/n
/n/n
How to Apply:
/n/n
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
/n/n
You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
/n/n
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
/n/n
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Not Specified
I
Quality Control Inspector
Salary not disclosed
About the Organization
IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion.
IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in:
Health
Dental
Vision
Life
LTD
Accident
Critical Illness
401k
Employees and their household members are also eligible to participate in the company's Employee Assistance Program.
Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work.
EOE Statement
IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.
Description
JOB TITLE: Quality Control Inspector
JOB CODE: Quality Control
REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor.
Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job.
Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others.
Required Education: High School diploma or equivalent
Required Certification: NACE Inspector and/or SSPC NBPI required.
Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards.
Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives.
Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks.
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Supervisory Responsibilities: None
Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.
Location
Newport News, VA
Salary Range
Exempt/Non-Exempt
Non-Exempt
This position is currently accepting applications.
IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion.
IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in:
Health
Dental
Vision
Life
LTD
Accident
Critical Illness
401k
Employees and their household members are also eligible to participate in the company's Employee Assistance Program.
Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work.
EOE Statement
IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.
Description
JOB TITLE: Quality Control Inspector
JOB CODE: Quality Control
REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor.
Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job.
Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others.
Required Education: High School diploma or equivalent
Required Certification: NACE Inspector and/or SSPC NBPI required.
Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards.
Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives.
Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks.
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Supervisory Responsibilities: None
Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.
Location
Newport News, VA
Salary Range
Exempt/Non-Exempt
Non-Exempt
This position is currently accepting applications.
Not Specified
E
Material Control Coordinator
Salary not disclosed
Kodak is looking for a Material Control Coordinator to join our Specialty Chemicals and Inks Manufacturing team in Rochester, NY.
We are seeking a motivated and detail-oriented individual to join our team as a Material Control Coordinator. In this role, you will be in the front line of communication with our customers, coordinating with operations, ensuring accurate order processing and supporting our business development team. This position requires the ability to multi-task, as well as organize and manage all forms of requests while providing excellent service to our customers.
Responsibilities:
• Maintain records (data entry) for all deliveries and shipments. File hardcopy documents per standard work.
• Create purchase requisitions for incoming materials and perform goods receipt once materials are delivered.
• Point of contact for product orders.
• Create orders for sales of solvents and invoices for incoming materials.
• Collect necessary documents after raw material receipt and product sales and send to customers.
• Collect necessary records from generator/broker for proper documentation to receive initial load/trial of material (manifest template, Land Disposal Restriction Forms, etc.)
• Create hazardous waste manifest documents for customers.
• Set up new customers, vendors, raw material items, and products items.
• Order internal production materials.
• Create purchase requisitions and manage purchase orders for railcar leases, subscriptions, contractors, and trade group memberships.
• Manage sample and small package shipments.
• Flexibility to learn operations work and assist as necessary.
• Hazardous waste receipt data entry into regulatory websites.
• Support Logistics Coordinator job functions.
• Monday – Friday, 40 hours/week with potential for overtime as needed.
• On location role with no remote work flexibility.
Job Skills:
• Excellent communication and teamwork skills, able to interface with sales, operations, engineering, transportation, transportation, management, logistics staff, etc.
• Good computer skills – SAP, MS Office (Outlook, Word, Excel, PowerPoint), familiarity with customer billing portals (Ariba).
• Initiative-taking - able to work independently.
• Problem solving – able to adapt and improve work processes.
• Willingness to learn and make positive contributions.
• Positive attitude.
• Flexibility - able to adjust to changing demands.
Not Specified
B
Instrument & Control Technician/Sr. Instrument & Control Technician
✦ New
Salary not disclosed
BHE GT&S
JOB DESCRIPTION
BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our North Summit Station in Hopwood, PA.
RESPONSIBILITIES
This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas.
- Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
- Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
- Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
- Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
- Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
- Ensures regulatory and compliance standards are met.
QUALIFICATIONS
Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree.
Instrument & Control Technician :
- Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
- A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months.
Sr. Instrument & Control Technician :
- Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
- A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
- Ability to lead project teams, assume project supervisor role and develop action plans.
- Knowledge of Natural Gas and Electric Driven Gas Compressors.
- Knowledge of Gas and Fire Detection Systems
- Knowledge of Emergency Shut Down (ESD) Systems.
Both levels :
- Ability to interpret control system software for the purpose of diagnostic troubleshooting.
- Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
- Ability to troubleshoot electrical, electronic, and pneumatic equipment.
- Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
- Ability to define specifications and requisition instrumentation and control equipment.
- Ability to define problems, collect data and draw conclusions.
- Ability to work independently and as a team member.
- Ability to communicate effectively and develop rapport.
- Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
- Ability to operate personal computer.
- Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
- Knowledge of electric driven compressors may be required.
- Knowledge of electrical and electronic theory and principles
- Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
- Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
- Knowledge of Variable Frequency Drives (VFD)
- Knowledge of Human Machine Interface (HMI)
- Knowledge of Ethernet Communications Equipment
- Knowledge of Valves and Positioners
- Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
- Knowledge of applicable regulatory requirements
Preferences :
It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job:
- Knowledge of electronic, radio, digital, and remote-control theory.
- Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
- Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
- Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
- Ability to prepare technical reports and repair and maintenance records.
- Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
- Ability to directs and participates in installation of telecommunications equipment.
- Ability to interpret and implement gas measurement and SCADA device installation specifications.
- Ability to performs design programming installation and operation of electronic gas measurement and control systems.
- Inspects and tests facilities and equipment to identify malfunctions.
- Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
- Ensures installations and equipment comply with regulations.
- Ability to supervise MC&C projects.
- Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities
**Relocation assistance for this position is available dependent upon meeting eligibility requirements.
Education
- Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)
Preferred Degree
- Electronics & Communications Engineering
* Preferred Licenses, Certifications, Qualifications or Standards:
- ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)
CHAMPION :
- Contribute to a team-centric work environment based on mutual respect and integrity
- Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers
Employees must be able to perform the essential functions of the position, with or without an accommodation.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs.
ABOUT THE TEAM
BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation.
JOB INFO
Job Identification 10004544
Job Category Pipeline Operations
Posting Date 2026-03-18
Apply Before 2026-04-07T03:59:00+00:00
Job Schedule Full time
Locations 252 Jumonville Rd, Hopwood, PA, 15445, US
Travel Requirements Up to 25%
Relocation Assistance Available for this position dependent upon eligibility requirements
Business Eastern Gas Transmission and Storage, Inc.
Compensation details: 32.26-46.39
PIa35bdf77f43e-37344-40004115
Not Specified
Controls & Integration Engineer III, Electrical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Generate design documents for SCADA/Automation projects
- Develop design document narratives
- Perform requirements analysis
- Generate Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical engineering and 5-7 years field experience
- Associate degree in the electrical field and 10 years field experience
- High school diploma and 15 years field experience
- 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- Must be a US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Controls & Integration Engineer III
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
Programming
Maintenance
Managerial Responsibilities
Estimates
Personnel Management
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer Skills:
Certificates and Licenses:
* Required Certifications
* Preferred Licenses / Certifications
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Not Specified
Controls & Integration Engineer II, Electrical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
Controls & Integration Engineer I, Mechanical
🏢 CPG
Salary not disclosed
Position:
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Managerial Responsibilities
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
Computer/Networking Skills:
Certificates and Licenses:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field TestingMaintenance
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
- Experience in reading mechanical and control schematics
- Experience in building automation systems (BAS) startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with test equipment and test equipment software
- Experience with networking design, configuration, and troubleshooting
- Experience with air handlers, chiller plant systems and data center CRAC units
- Ability to travel up to 80%
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Not Specified
R
Control Technician
✦ New
Salary not disclosed
Client Notes: 3rd shift
Job Description
Primary Purpose: The Maintenance Technician plays a critical, hands-on role in supporting plant uptime and performance. This position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations. The ideal candidate is a strong problem solver, highly responsive, and thrives in a fast-paced manufacturing environment
Primary Duties & Responsibilities
Real-Time Equipment Support & Troubleshooting
- Immediately respond to breakdowns and perform on-the-spot repairs to restore production.
- Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems, including PLC I/O and instrumentation.
- Collaborate with operators to identify and resolve root causes of equipment malfunctions.
- Support line changeovers and production start-ups.
PLC and Electrical Control Support
- Diagnose and repair PLCs, HMIs, VFDs, and control-related issues.
- Troubleshoot systems using tools such as Allen-Bradley RSLogix 5000.
- Assist with equipment upgrades, installations, and control panel builds.
- Run conduit, pull wire, and terminate Ethernet and communication cabling.
Preventive Maintenance and Continuous Improvement
- Perform scheduled preventive maintenance with focus on reliability and efficiency.
- Take ownership of specific PM areas and proactively improve them.
- Accurately document all maintenance activities in the CMMS.
- Identify recurring issues and propose long-term corrective actions.
Project and Fabrication Work
- Assist in machinery installation and facility improvement projects.
- Perform light fabrication and welding for safety and efficiency-related improvements.
Safety & Communication
- Always follow safety protocols and use proper PPE.
- Keep work areas clean, organized, and free from hazards.
- Attend and contribute to daily shift meetings and status updates.
Key Attributes & Abilities
- Strong problem-solving and troubleshooting skills.
- Ability to work under pressure and make fast, informed decisions.
- Good communication and team collaboration abilities.
- High personal accountability, attention to detail, and reliability.
- Open-minded and eager to learn new systems and technologies.
- Willing to work 8- or 12-hour shifts depending on business demands, with overtime as needed.
Qualifications & Experience
- High school diploma or equivalent required; technical certifications or trade school training preferred.
- Minimum 4 years of industrial maintenance experience, preferably in a manufacturing environment.
- Demonstrated experience with PLC troubleshooting and industrial electrical systems.
- Working knowledge of RS Logix 5000 or similar programming environments preferred.
- Ability to interpret electrical, hydraulic, pneumatic, and mechanical schematics.
- Basic welding and fabrication skills.
- Understanding of Lean principles, 5S, and Root Cause Analysis is a plus.
- Familiarity with CMMS platforms for logging repairs, PMs, and work orders; ability to navigate and input data accurately.
Physical Requirements
- Must be able to remain on the factory floor for long periods of time, potentially a full shift
- Ability to lift, push, pull, or carry up to 50 lbs.
- Ability to crouch, bend, kneel, squat, twist, reach, and stand for extended periods
- Ability to perform equipment maintenance tasks requiring full-body movement and sustained physical effort
- Requires full range of motion in arms, hands, and fingers to reach, grasp, hold, push, pull, twist, and use tools
- Must be able to climb and work on ladders
- Ability to stay alert and react quickly to plant conditions
- Schedule may require 40+ hours per week to support manufacturing production.
- Compensation
Not Specified
G
HR Control Director
🏢 GEICO
Salary not disclosed
HR Control Director
GEICO is seeking a visionary and strategic HR 1st Line of Defense Control/Risk Director to drive risk management and controls across our Human Resources (HR) functions. This high-impact role is designed for an initiative-taking leader who excels in partnership, thrives in collaborative environments, and brings a strong action-oriented approach. The ideal candidate will champion a process mindsetidentifying enhancement and re-engineering opportunities and leveraging AI and automation to deliver efficiency and effectiveness in key HR activities. Most importantly, this leader will demonstrate a \"can do\" mentality, focused on \"getting to yes\" and breaking down barriers to achieve solutions that align with both risk management objectives and business priorities.
LocationThis hybrid role requires on-site presence three days per week at one of GEICO's office locations: Chevy Chase, MD; Chicago, IL; Dallas, TX; or New York, NY.
Key Responsibilities- Strategic Partnership: Build and nurture strong relationships across HR, business units, and Technology functions to seamlessly integrate risk management into HR initiatives.
- Risk-Based Approach: Understand and prioritize business needs, applying a risk-based mindset to HR processes and controls.
- Process Mindset & Innovation: Advocate for process improvement, actively seeking opportunities for enhancement, re-engineering, and leveraging AI or automation to maximize efficiency and effectiveness.
- Can Do Mentality & Getting to Yes: Approach challenges with optimism, persistence, and resourcefulnessalways striving to find practical solutions and drive consensus that aligns business objectives with risk mitigation.
- Continuous Improvement: Deliver ongoing transformation within HR controls, supporting business growth and compliance through innovative process changes.
- Governance and Compliance: Develop, implement, and maintain policies and procedures that fulfill regulatory requirements and uphold internal standards.
- Team Leadership: Build, guide, and empower a collaborative team focused on designing, monitoring, and remediating HR controls.
- Stakeholder Communication: Clearly and effectively communicate risk events, issues, and process updates to HR leadership, the Audit Committee, and external auditors.
- Training and Awareness: Lead educational sessions for HR staff on risk management, controls, and compliance.
- Bachelor's degree in human resources, business, finance, or a related field; or equivalent relevant experience.
- 8+ years of experience in risk management, internal controls, or compliance, preferably within HR or large, complex organizations.
- Demonstrated partnership and collaboration skills, with the ability to influence stakeholders across diverse functions.
- Initiative-taking, action-oriented mindset with a focus on results and continuous improvement.
- Process-driven, with the ability to propose and implement enhancement opportunities, including re-engineering and AI/automation.
- Excellent written and verbal communication skills, with the ability to distill and present complex issues clearly.
- Strong prioritization skills for thriving in fast-paced, changing environments.
- Master's degree in HR, business, or finance (HR certifications or risk management credentials are a plus).
- Experience with data analysis, process automation, or HR analytics.
- Background in SOX compliance, forensic audit, or control design relating to HR.
This is an exceptional opportunity to join GEICO during a period of transformationleading impactful change in HR risk management, promoting a culture of \"getting to yes,\" and helping shape the future of our organization.
Annual Salary $146,575.00 - $229,600.00. The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate's work experience, education and training, the work location as well as market and business considerations.
At this time, GEICO will not sponsor a new applicant for employment authorization for this position.
The GEICO Pledge:
Great Company: At GEICO, we help our customers through life's twists and turns. Our mission is to protect people when they need it most and we're constantly evolving to stay ahead of their needs.
We're an iconic brand that thrives on innovation, exceeding our customers' expectations and enabling our collective success. From day one, you'll take on exciting challenges that help you grow and collaborate with dynamic teams who want to make a positive impact on people's lives.
Great Careers: We offer a career where you can learn, grow, and thrive through personalized development programs, created with your career and your potential in mind. You'll have access to industry leading training, certification assistance, career mentorship and coaching with supportive leaders at all levels.
Great Culture: We foster an inclusive culture of shared success, rooted in integrity, a bias for action and a winning mindset. Grounded by our core values, we have an established culture of caring, inclusion, and belonging, that values different perspectives. Our teams are led by dynamic, multi-faceted teams led by supportive leaders, driven by performance excellence and unified under a shared purpose.
As part of our culture, we also offer employee engagement and recognition programs that reward the positive impact our work makes on the lives of our customers.
Great Rewards: We offer compensation and benefits built to enhance your physical well-being, mental and emotional health and financial future.
- Comprehensive Total Rewards program that offers personalized coverage tailor-made for you and your family's overall well-being.
- Financial benefits including market-competitive compensation; a 401K savings plan vested from day one that offers a 6% match; performance and recognition-based incentives; and tuition assistance.
- Access to additional benefits like mental healthcare as well as fertility and adoption assistance.
- Supports flexibility- We provide workplace flexibility as well as our GEICO Flex program, which offers the ability to work from anywhere in the US for up to four weeks per year.
The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.
GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.
Not Specified
jobs by
✓ All jobs loaded