Mtc Tooling Systems Ltd Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Title: Tooling Engineer

Reports to: Tooling Manager

Department: Tooling Engineering

Job Summary:

Under the direction of the Tooling Manager, the Tooling Engineer is responsible for assisting the Tooling Engineering Department in directing the manufacture of quality injection molding tools. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Writing purchase orders stating mold building specifications.
  
  
• Writing requests for quotations for vendors.
  
  
• Assure that vendors keep within budget and timing constraints on projects.
  
  
• Evaluate and Approve injection molding tool design.
  
  
• Assure that vendors incorporate the approved design in injection molding tool construction.
  
  
• Keep a library of tool drawings.
  
  
• Travel to vendors to evaluate progress in injection molding tool construction. Travel to vendors to evaluate completed injection molding tool performance and product conformity.
  
  
• Evaluate product design as to moldability and simplification for moldability.
  
  
• Assist in troubleshooting injection molding problems.
  
  
• Work with injection molding tool designs to assure the highest quality molding tools possible.
  
  
• Work with toolmakers to assure the highest quality injection molding tools possible.
  
  

Other duties assigned:

• 
  
  
• Other duties as assigned.
  
  

Qualifications:

• 
  
  
• High school diploma or equivalent.
  
  
• Associate degree or in lieu of degree, three or more years of prior on-the-job experience. A good mechanical ability.
  
  
• Prior experience with plastic injection molding process.
  
  
• Knowledge of injection molding tools and injection molding tool construction.
  
  
• Knowledge of machine tools and how machine tools relate to injection mold tool construction.
  
  
• Knowledge of manufacturing best practices.
  
  
• Excellent computer skills, including Microsoft software and CAD software.
  
  
• Organized; can meet deadlines.
  
  
• Ability to work non-standard hours to meet the needs of the customers.
  
  
• Ability to travel internationally.
  
  
• Must have a valid driver's license with an acceptable driving record, along with adequate automobile insurance.
  
  

#LI-KN1 #LI-Hybrid

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Excelligence Learning Corporation is a privately held educationservices company founded in 1985 and headquartered in Monterey, California. As a global leader in early childhood and elementary education, it develops, manufactures, and distributes over 20,000 educational products and instructional solutions-ranging from classroom supplies and furnishings to proprietary curricula and digital learning tools-under awardwinning brands such as Discount School Supply, Really Good Stuff, Frog Street, Children's Factory, Steve Spangler Science, and others Glassdoor+3Great Place To Work+3Glassdoor+3. Driven by the mission "Empowering The Education Experience," Excelligence leverages cuttingedge technologies, earlybrain science, and robust fulfillment systems to support more than 33 million young learners and the educators who serve them Great Place To Work. With multiple locations across the U.S., including a major manufacturing and distribution center near Kansas City in Gardner, Kansas, the organization blends national scale with local impact-recognized for both community environmental stewardship and as a Great Place to Work

Overview

Excelligence Learning Corporation is seeking a detail-oriented, data-driven Business Systems Analyst to support Discount School Supply's inventory planning and purchasing operations with a strong focus on systems, analytics, and business intelligence tools. This role is critical in enhancing operational decision-making by leveraging BI platforms, structured datasets, and advanced reporting to deliver insights that directly impact forecasting accuracy, inventory performance, and supplier compliance.

You will work cross-functionally with Purchasing Managers, IT, Kitting, and Operations to ensure end-to-end visibility of inventory health while building tools, dashboards, and models that streamline workflows and deliver business-critical intelligence.

Core Responsibilities

Business Intelligence & Systems Development

• 
  
• Build and maintain dashboards and reporting tools in BI platforms such as Tableau or Power BI to monitor KPIs like service levels, inventory turns, forecast accuracy, and supplier performance.
  
• Utilize SQL and data warehouse environments to extract, transform, and analyze large data sets.
  
• Translate business questions into data requirements and drive data quality and visibility across purchasing, merchandising, and fulfillment functions.
  
• Partner with IT and Operations teams to improve systems integration, data flow, and automation of recurring reports.
  
• Regularly publish proposed supply plans by synthesizing inputs from demand forecasts, current inventory levels, safety stock thresholds, and lead times.
  
• Lead small-scale BI and system enhancement projects that improve inventory insights and forecasting agility.
  

Inventory Analysis & Demand Planning

• 
  
• Deliver weekly performance scorecards and KPI dashboards to support Purchasing Managers and guide decision-making.
  
• Develop forward-looking inventory glidepaths and simulate future stock scenarios to proactively identify service gaps.
  
• Provide detailed inventory analyses to reduce overstock risk, improve working capital efficiency, and ensure alignment with budget goals.
  
• Maintain high item data integrity and ensure inventory availability aligns with merchandising strategy and system readiness.
  
• Ensure sellability of inventory through item status audits and system validations.
  

Required Qualifications

Education

• 
  
• Bachelor's degree in Business Administration, Computer Science, Information Systems, Statistics, or a related field.
  

Experience

• 
  
• 3+ years of experience in business intelligence, data analysis, inventory analytics, or a related field.
  
• Demonstrated experience leading BI or reporting projects and delivering data-driven recommendations to senior leadership.
  
• Experience working with large datasets and applying data modeling principles.
  

Technical Skills

• 
  
• Proficiency in BI tools such as Tableau, Power BI, or equivalent platforms.
  
• Strong knowledge of SQL and data warehousing concepts/tools.
  
• High proficiency in Microsoft Excel for modeling, analysis, and reporting.
  
• Experience with ERP systems and item/inventory master data management preferred.
  

Analytical and Communication Skills

• 
  
• Ability to interpret complex data and convert it into actionable business insights.
  
• Proven problem-solving abilities, particularly in system and data integration scenarios.
  
• Excellent organizational, communication, and documentation skills.
  
• Strong attention to detail and comfort with both independent and cross-functional work in a fast-paced environment.
  

Equal Opportunity Statement

Excelligence is an Equal Employment Opportunity (EEO) Employer. We are committed to providing equal employment opportunities to all employees, applicants, and other covered individuals without regard to race, color, religion or creed, sex, gender identity, pregnancy, sexual orientation, marital status, national origin, age, disability, military or veteran status, or any other protected classification under local, state, or federal law.

Are you an experienced leader in Distributed Antenna Systems (DAS) installation, ready to take on large-scale projects and mentor a team? As a Lead DAS Installer, you'll lead the charge in implementing wireless solutions for in-building distributed antenna systems. You’ll oversee a crew of 3-5 installers, ensuring the highest quality standards are met on every job site. This is a hands-on role, working closely with the Project Manager and installation teams to deliver seamless wireless coverage.

Your expertise will help guide the team in reading blueprints, installing DAS equipment, and configuring advanced systems. This is an exciting opportunity for a motivated leader who enjoys working in dynamic environments across the country.

Key Responsibilities:

• Lead Installation Crews: Oversee installation teams, providing guidance, training, and mentorship to 3-5 technicians throughout the project lifecycle.
• DAS Equipment Installation: Install outdoor and indoor antennas, coaxial cables, CATV, fiber optic cables, CAT 5/6, and DC power cables to NEC standards.
• Cabling & Testing: Perform advanced cable terminations, including coaxial (JMA, Andrews, Trilogy), fiber fusion splicing, OTDR testing, and coaxial PIM/Sweep testing.
• System Configuration & Integration: Configure and integrate DAS head-end systems such as Rectifiers, Battery Systems, VoltServer, Commscope iON-B and iON-U, JMA Teko, and Corning Mobile Access. Manage monitoring systems including T1, broadband backhaul, routers, and dry contact alarms.
• Project Reporting & Communication: Keep both the company and clients informed about project progress, safety standards, and local codes. Update and maintain project documentation, customer prints, and site reports.
• Site Surveys & RF Design: Conduct site surveys to troubleshoot and optimize RF/fiber optic installations, report findings, and design corrective solutions for inadequate coverage.
• Assist in Project Preparation: Help in proposal development, project scheduling, and materials/subcontractor selection processes.
• Warehouse Support: Assist with warehouse maintenance, inventory management, and ensuring adequate materials for upcoming projects.

Minimum Qualifications:

• Experience:
• A minimum of 5 years of in-building DAS installation experience.
• Extensive experience with cable installation in IT, RF, electrical, and/or telecommunications fields.
• Expertise in fiber fusion splicing, terminations, dressing, cleaning, and OTDR testing.
• Proven ability in RF Sweep and PIM measurements.
• Solid understanding of wireless networks, including modulation techniques (UTMS, GSM, LTE), amplifier/antenna/cable theory, link budgets, and propagation tools.
• Experience using RF test equipment (spectrum analyzers, sweep, and PIM gear).
• Technical Proficiency: Demonstrated ability to read and interpret construction blueprints and design drawings.
• Management Skills: Previous experience as a Field Supervisor, with a proven track record of managing and mentoring less experienced technicians.
• Software Skills: Proficiency in Microsoft Office, particularly Excel.

Additional Requirements:

• Travel: Ability to travel nationwide for project deployments lasting 4-6 weeks, with short breaks in between. Travel constitutes over 60% of the role.
• Driver’s License: Must possess a valid driver’s license.
• Physical Requirements:
• Ability to lift up to 80 lbs. unassisted.
• Repeatedly ascend and descend ladders (6ft-14ft).
• Work in tight, confined spaces, such as attics and drop ceilings.
• Walk continuously across the job site while carrying ladders, tools, and materials.
• Ability to work in varied conditions, both indoor and outdoor (hot and cold).
• Tools: Must provide basic hand tools.
• Compliance: Must pass a criminal background check, drug screening, and pre-employment physical.

Preferred Certifications (Training provided if needed):

• RF Awareness
• OSHA 10 or OSHA 30
• EXFO Splice/Test OTDR/iOLM
• Anritsu PIM & Sweep
• JMA (Connectors & TEKO DAS)
• Ericsson RDS Structured Cabling Installation
• SOLiD, Commscope – Ion-M, Ion-B, Ion-U, Ion-E
• Corning Mobile Access – CMA & SpiderCloud
• First Aid/CPR, UL Lockout/Tagout

What We Offer:

• Competitive Pay: $34.00 - $41.00 per hour.
• Comprehensive Benefits: Health insurance, paid holidays, paid vacation, life insurance, and paid training.
• Growth Opportunities: Company-paid professional development and certification programs to keep you ahead in the industry.
• Travel Perks: We provide transportation to and from project sites and per diem while working on-site.
• Tools Provided: All additional tools needed for the job are supplied by the company.

Ready to Lead?

If you’re a seasoned DAS Installer ready to take on leadership, we want to hear from you! Bring your expertise and drive to a team that values professionalism, integrity, and teamwork.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Paid training
• Professional development assistance
• Vision insurance

Education:

• High school or equivalent (Preferred)

Experience:

• In-building DAS: 3 years (Preferred)

License/Certification:

• Driver's License (Required)

Work Location: On the road

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for a Tool and Die Technician to join our team in Delphos, OH. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

What you will be doing:

• Provide technical assistance during process and tooling development to meet setup and while assuring process capability
• Produce first pieces required for approval to the specifications required working with Quality Assurance to assure compliance with specifications
• Produce pilot production runs and verifies speed of production and quality of product manufactured
• Verifies dimensions, alignments and clearances
• Experience & Knowledge required with electrical systems, hydraulics, and milling
• Knowledge of Hot Runner Systems, including Synventive, HRS
• Diagnose problems and determine corrective actions
• Complete all associated paperwork having to do with mold maintenance and PM logs
• Connects wiring and hydraulic lines to install electrical and hydraulic components
• Repair, modify and/or adjust molds
• Performs required insert changes and repairs
• Dismantles dies to gain access to and repair die components
• Fabricates and repairs welder plates and supports repair of miscellaneous auxiliary equipment
• Polishing, benching, spotting, grinding, drilling, machining, fitting, welding, operate overhead crane

What you will bring along:

• High school diploma or equivalent required. Technical degree preferred. Journeymans card acceptable instead of technical degree.
• Minimum 2-4 years of related experience
• Ability to work afternoon/midnight shifts as needed
• Ability to work overtime as needed
• Ability to be on call for weekend repairs as needed
• Experience maintaining a clean and organized tool & die area that allows for easy access to molds and equipment/tools
• Must have the ability to multi-task in a fast-paced environment
• Good written and verbal communication skills
• Detail oriented
• Excellent time-management skills with great attention to organization
• Excellent people skills
• Excellent computer skills in Microsoft Office
• Ability to work effectively with all levels of management and large numbers of employees
• Proven experience being flexible and adaptable in challenging situations

What we can provide you:

• Medical, Dental, and Vision coverage eligibility on day 1
• Flex Spending Accounts
• Health Savings Account
• 401(k)
• Volunteer Life Insurance options
• Critical Illness and Accident Insurance
• Tuition Reimbursement Programs
• Robust Employee Assistance Program Services
• Individualized Developmental Opportunities

Expected to perform all the activities on the Factory Service Center Shipping & Receiving Team. Receives and ships all customer tools into and out of the Factory Service Center. Receives all customer returns and accurately enters customer and product information into various business platforms including JDEdwards, 360 Insight, or any other required business platform. Moves material to different locations in the building(s), utilizing various forms of material handling equipment including forklifts, hand trucks, two-wheel dollies or transfer truck. Evaluates customer returns for warranty, credit or repair as determined by company and department policies. Receives and ships all customer tools into and out of the Factory Service Center.

In This Role, Your Responsibilities Will Be:

* Receive tools sent to the factory service center from customers requesting a tool repair evaluation.

* Receive tools sent to the stock returns area from distributors requesting a credit.

* Receive parts shipments from DCs and suppliers, and all misc. packages that are sent to the factory service center. Put away parts into correct inventory locations.

* Package/box, label, and ship tools to customers and distributors accurately.

* Process/record all transactions in JDE, 360 Insight.

* Help walk-in customers with tool receipts and basic questions about the repair process.

* Identify the specific tool model on incoming receipts using variety of factors like serial number, product catalog, and general knowledge of product line.

* Evaluate condition of packaging and tool returned for stock credit. Make determination on whether the distributor should be given credit using a variety of factors such as condition of tool, serial number, sales order number, purchase order number. Determine whether the tool can be salvaged through repair or if the tool should be scrapped.

* Must have a good working or developing understanding of the entire product line.

* Good understanding of the various packaging sizes and understand limits of when the standard package can be substituted for another size.

* Supports receiving team at service desk counter, and interacts with customers in taking orders and providing feedback on the lead time in person.

* Receives tools for repair and customer returns at the standard daily and weekly pace set by the service center supervisor and management, without needing significant help from others.

* Information about tool received for repair that is entered into 360 with errors is relatively low and occurs within an acceptable amount of tolerance for the amount of training and experience with the product line.

* Parts and tools are put away into the correct inventory locations and errors are relatively low..

Who You Are:

* You stay aligned with your goals and stay productive. You prepare content for communication that is impactful. You build the customer relationships. You find ways to manage stress and pressure. You define issues and can map out a process.

For This Role, You Will Need:

* 1 year manufacturing or warehouse experience

* 1 year troubleshooting experience.

* Ability to interface with customers in person or via email communications.

* Ability to obtain a forklift license.

* Good oral and written communication skills.

* Working knowledge of computer applications.

* Legal authorization to work in the United States - Sponsorship will not be provided for this position.

Preferred Qualifications That Set You Apart:

* 3 years manufacturing experience, preferably in shipping/receiving/warehousing.

* 1-3 years customer facing experience.

* Forklift License

Our Culture & Commitment to You:

The salary range for this role is $45,700 - 53,000 annually, commensurate with the skills, talent, capabilities, and experience each candidate brings to a role.

At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Learn more about our Culture & Values.

LI-BS

TOOLMAKER III

BENEFITS

• 15% Shift Premium - 2ND SHIFT ONLY
• Medical & Vision Insurance
• Supplemental Insurance Plans Available
• Dental Insurance (Company paid)
• STD and Life & AD&D Insurance (Company paid)
• 401(K) Matching
• PTO & Unpaid Excused Absences
• Uniforms (Company paid)
• Training & Apprenticeship Opportunities
• Safety Shoe & Glasses Reimbursement Program
• Gym Membership Reimbursement Program

JOB SUMMARY

As a Toolmaker III, you play a critical role in developing and optimizing advanced tooling solutions for manufacturing processes. Leveraging your extensive experience and expertise as a toolmaker, you are responsible for designing, fabricating, manufacturing, and maintaining complex tools, dies, molds, and fixtures. Your role involves collaborating with cross-functional teams, providing technical guidance, and leading projects to drive process improvements and efficiency gains.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Interprets complex engineering drawings, blueprints, and specifications to identify tooling requirements and constraints.
• Utilizes advanced computer-aided design (CAD) software to help create intricate 2D and 3D models of tooling components, ensuring optimal design and manufacturability.
• Directs the Toolmaker Is and IIs on daily tasks.
• Operates various precision machine tools, including CNC machines, EDM machines, grinders, and lathes, to fabricate and modify complex tooling components.
• Conducts thorough inspections and dimensional checks using advanced metrology equipment to ensure the accuracy and quality of finished tooling components.
• Assembles, fits, and tests intricate tooling components, verifying functionality, performance, and conformance to specifications.
• Leads cross-functional teams in developing and optimizing tooling designs, collaborating with engineers, production personnel, and quality assurance teams to drive innovation and efficiency.
• Troubleshoots and resolves complex tooling-related issues, utilizing root cause analysis and implementing corrective actions to improve performance and reliability.
• Develops and implements preventative maintenance programs to ensure tooling assets' longevity and optimal performance.
• Generates comprehensive documentation, including design records, modification logs, and maintenance reports, to maintain accurate records and facilitate knowledge transfer.
• Provides technical guidance and mentorship to Toolmaker Is and IIs, fostering a culture of continuous learning and skill development.

The above list reflects the general details necessary to describe the principle and essential functions of the position. It shall not be construed as the only duties that may be assigned for the position. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• Strong attention to detail, organization, and leadership skills.
• Ability to follow written and verbal directions.
• Strong teamwork skills.
• 5+ years of experience working with molds and dies.
• 5+ years of experience working as a Toolmaker.
• Working knowledge of safety protocols.
• Ability to use shop mathematics, working with drawings, specifications, and formulas in tooling.
• Ability to pass Company-provided Overhead Crane and Forklift Operating Certifications.
• Proficient at using floor equipment such as grinders, mills, lathes, etc.
• Must possess own toolbox and tools for the position.
• Experience with CAD software.
• Ability to work with equipment used for making hydraulic lines and water circuits.
• Proficient in timing and fitting of die components.
• Ability to remain at or under budget on projects.
• Proficient knowledge of various steel grades, heat treat specifications, and coatings/texturings.

PREFERRED QUALIFICATIONS

• 10+ years of experience working with molds and dies.
• High school degree or equivalent.
• A Journeymans Tool & Die Makers Accredited Apprenticeship or two years of technical college training in the tool & die field.

PHYSICAL AND MENTAL DEMANDS

An employee must meet the physical and mental demands described here to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

Compensation details: 35-45 Hourly Wage

PIfe3072403d93-26289-39495701

• Enforce company safety policies

• Issue, receive, and store hand tools and equipment

• Maintain inventory of all tools and order new equipment as needed

• Keep records of tools issued to employees

• Report damaged, worn out, or missing equipment

• Use computer to enter and track tool transactions

• Clean, oil, and perform minor repairs on tools or equipment

• Coordinate with field employees to ensure timely delivery of tools

• Keep work area clean and organized

• Maintain high quality and productivity standards

• Assist other departments as needed based on workload

• High school diploma or equivalent

• Valid Florida driver's license

• In-depth knowledge of duct fabrication and installation systems

• Understanding of HVAC systems and related supporting utilities

• Ability to work independently without supervision

• Strong leadership and employee management skills

• Physical tasks include standing, balancing, climbing stairs and ladders

• Daily walking and lifting of 50 pounds or more

• Use of upper extremities for forward and overhead reaching, pushing, pulling, and handling materials

• Use of torso and lower extremities for kneeling, crawling, stooping, twisting, and squatting

Bundy Baking Solutions is the world's leading manufacturer of baking equipment custom and stock baking pans and pan coatings. Built with extensive hands-on knowledge of the baking industry and its operations, Bundy has a legendary reputation for both quality and innovation.

• Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product
• Operates metalworking machine tools, such as lathe, milling machine, drill, or grinder to machine parts to specifications
• Assembles parts into completed units using jigs, fixtures, hand tools, and power tools
• Fabricates, assembles, and modifies tooling, such as jigs, fixtures, templates, and molds or dies to produce parts and assemblies
• Verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry within .0005
• Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media
• Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Measures, examines, and tests completed units to detect defects and ensure conformance to specifications
• Dismantles machines, dies, or equipment, using hand tools and power tools, to examine parts for defect or to remove defective parts
• Cleans, lubricates, and maintains machines, tools, and equipment to remove grease, rust, stains, and foreign matter
• Confers with engineering, supervisory, and manufacturing personnel to exchange technical information
• Designs fixtures, tooling, and experimental parts to meet special engineering needs

• Knowledge of various machines such as cutting tools, lathes, milling machine, shaper, grinder
• Knowledge of powered tools
• Ability to read blueprints
• Ability to measure, mark and organize metal stock for machining
• The ability to exert maximum muscle force to lift, push, pull, or carry objects weighing 50 pounds
• The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
• The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
• The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
• The ability to communicate information and ideas in writing so others will understand
• The ability to remember information such as words, numbers, pictures, and procedures
• The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs

PIbefd11991366-26289-39921649