Morse Code Alphabet Jobs in Usa
3,243 positions found — Page 16
Work Shift
Night (United States of America)
Hours: FT Nights, 9pm to 7:30am
Job Summary:
Prepare, compound, dispense medications, and perform other technical duties in the pharmacy department under direct supervision of a Pharmacist. Must demonstrate competency through supervised observation and/or any other necessary annual required competencies. Must be proficient in all responsibilities and duties of certified pharmacy technician.
Core Responsibilities and Essential Functions:
Medication Distribution
* Single Dispense - must prepare medications and/or IV for dispensing, select correct medication, correct strength, and correct form. Fill, label, and initial medication bag for a pharmacist verification.
* Bulk Dispense- Must fill multiple patient specific medications in accordance with department procedure.
* Transportation- bulk fill, first dose, and missing doses will be delivered securely to the appropriate units, while practicing appropriate procedure to ensure confidentiality for all patients.
* Missing Doses- upon request, must properly generate label, fill and have checked by a pharmacist, then dispense to the appropriate floor or unit.
* Product Preparation- must properly prepare, measure, count, medications including compound ointments, creams, oral solutions, oral solids, IV, etc.
(ADC) Automatic Dispensing Cabinet
* User- must be capable of accurately adding new users to the ADC system.
* Product- must properly load ADC with correct medications after medication is checked by a pharmacist. Monitor par levels and increase or decrease as needed.
* Reports- must be able to generate needed reports to fill, track, and identify/report all discrepancies.
* Minor Maintenance- must trouble shoot minor problems with ADC.
* Restock- must accurately fill medication, fluids and stock outs as needed.
* Recall- must assist the pharmacist and inventory specialist in retrieving recalled medications.
* Controlled Substances- Must follow all policies, procedures, and applicable laws with controlled substance medications.
IV Admixture
* Aseptic technique- Demonstrate knowledge of aseptic technique including; proper hand washing and proper use of IV Room attire. Understand Joint Commission, hospital, and departmental policies and procedures. Must complete an aseptic technique competency to show compliance with USP standards, conducted by supervisor or Lead Pharmacy Technician.
* Small volume- Demonstrate knowledge of preparing small volume admixtures
* Specialty solutions- Demonstrate knowledge of preparing epidural, intrathecal, intravenous, intramuscular, sterile syringes and chemotherapy (when applicable)
* Syringes- Demonstrate knowledge of preparing neonatal syringes (when applicable)
* Large volume- Demonstrate knowledge of preparing large volume solutions
* Room cleaning - Demonstrate knowledge of policies and procedures regarding maintaining clean room environment.
* Safety and Compliance Follows all safety and compliance standards for safely compounding medications. Always ensure that all requirements and procedures of United States Pharmacopeia are met.
Miscellaneous Activities:
* Repackaging and bar-coding medications- must accurately label all repackaged items per Georgia Board of Pharmacy Rules and Regulations.
* Properly provide customer service to customers and other healthcare professionals via in-person or virtual means.
* Process any charges: late charges, supplemental, OR charges, nuclear and exception report.
* Ordering supplies and obtaining purchase orders using the appropriate ordering system.
* Must be proficient in the distribution and accountability of Controlled Substance Medications.
* Code Carts / Kits - Must restock code carts and other kits returned to pharmacy according to departmental procedure and ensure required inspections are completed.
* Must perform monthly unit and pharmacy inspections and ensure that assigned pharmacy or medication area is clean including temperature and humidity monitoring.
* Must perform out date tracking on medications in various locations of the facility.
* Train and mentor pharmacy technicians under lead pharmacy technician
Performs other duties as assigned
Complies with all Wellstar Health System policies, standards of work, and code of conduct.
Required Minimum Education:
- High School Diploma General or GED General
Required Minimum License(s) and Certification(s):
All certifications are required upon hire unless otherwise stated.
- PHT - Registered Pharmacy Tech
- CPHT - Cert Pharmacy Tech or PHARMINT - Pharmacist - Intern
Additional License(s) and Certification(s):
Licensed and in good standing with the Georgia State Board of Pharmacy.
Upon Hire Required
Required Minimum Experience:
Hospital pharmacy experience Preferred and
General experience in all phases of pharmacy operations including basic knowledge of automated dispensing cabinets, inventory management, medication order interpretation, and Ga. Pharmacy law.
Required
Required Minimum Skills:
Basic computer skills.
Good oral communication skills.
Basic management skills.
Good problem solving skills.
Good interpersonal skills.
Ability to lift a minimum of 30 pounds.
Ability to push a transportation cart of approximately 100 pounds.
Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.
Work Shift
Night (United States of America)
Job Summary:
The Rapid Response Team (RRT) Nurse is a registered professional nurse who functions under the direction of the Nurse Manager and is responsible for coordination of Rapid Response Team assessment of patient, prioritization and implementation of interventions to ensure optimal patient outcomes, documentation of interventions and outcomes, communication with other team members and disciplines, and safe delivery of age appropriate and culturally aware patient care. The RRT Nurse is accountable for addressing the patient/family biological, emotional, developmental, psychosocial and education needs. The RRT Nurse serves as a resource/support to the staff, physicians, patients, families, and other departments. The RRT Nurse is responsible for RRT calls, follow-up visits, RRT data collection, entry and analysis, development of RRT practice guidelines, evaluation of patient codes and informal education of staff.
Core Responsibilities and Essential Functions:
Patient Care
* Responds to RRT calls.
* Coordinates patient care during events including assessment, planning, intervention, and evaluation of outcomes
* Communicates with medical staff, nursing staff, other disciplines and departments as required to ensure optimal patient outcomes
* Intervenes in patient crisis to promote quality patient care
* Documents assessment, interventions, and outcomes in patient medical record; utilizes SBAR documentation
* Develops and implements clinical practice guidelines for RRT.
* Monitors patient outcomes and conducts follow-up as required
* Assesses patient and family or support system needs
* Educates patient, families or support system as required and documents
* Educates staff pertaining to RRT.
Data Monitoring
* Collects, monitors, and trends RRT data
* Analyzes data to determine opportunities for improvement; reports findings to medical staff and nursing leadership as requested
* Recommends improvements required to promote optimal patient outcomes to medical staff and nursing leadership
* Initiates and implements improvements related to RRT based on data trends
* Analyzes patient code data to identify trends and makes recommendations for improvements based on data
* Monitors near miss events to identify and initiate prevention measures to promote quality patient care
Professional Practice
* Serves as professional role model within professional nursing utilizing professional clinical judgment
* Serves as a mentor in the development of peers and clinical staff
* Liaison between medical staff and patients and families
* Creates and maintains supportive work environment conducive to quality patient care including taking corrective action when needed
* Supports fiscal accountability for human and material resources
* Collaborates with Nurse Manager to recruit and retain staff
* Supports performance improvement initiatives designed to promote quality patient care
* Promotes professional nursing practice through shared governance, evidence-based practice and ethical accountability
* Maintains confidentiality
Performs other duties as assigned
Complies with all WellStar Health System policies, standards of work, and code of conduct.
Required Minimum Education:
Associates Nursing or Diploma (Nurse) Nursing or Bachelors Nursing-Preferred
Required Minimum License(s) and Certification(s):
All certifications are required upon hire unless otherwise stated.
ACLS - Advanced Cardiac Life Support or ARC-ALS - Amer Red Cross Advanced Life Support or ACLS-I - ACLS - Instructor
BLS - Basic Life Support or ARC-BLS - Amer Red Cross Basic Life Support or BLS-I - Basic Life Support - Instructor
RN - Reg Nurse (Single State) or RN-COMPACT - RN - Multi-state Compact
Additional License(s) and Certification(s):
Currently licensed as a Registered Nurse in the State of Georgia or hold a privilege to practice in the State of Georgia under the Enhanced Nurse Licensure Compact (eNLC) Upon Hire Required
current American Heart Association (AHA) Advanced Cardiac Life Support credentials Upon Hire Required
current AHA Basic Life Support credentials Upon Hire Required
national certification in critical care nursing Upon Hire Preferred
NIHSS certification Upon Hire Required
Required Minimum Experience:
Minimum 2 years of nursing practice in a critical care environment Required and
Required Minimum Skills:
Ability to read, write and speak the English language
Strong customer service and interpersonal skills
Inter- and intra-departmental coordination of patient care activities
Delegation skills required
Ability to multi-task essential
Ability to function in stressful and emergency situations essential
Strong detail orientation required
Computer skills required
Personal time management skills are required
Compliance with the American Nurses' Association Code of Ethics for Professional Nurses is required
Demonstrates knowledge of and practices within parameters outlined in Georgia Registered Professional Nurse Practice Act.
Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.
Job Description
JOB SUMMARY:
The Senior Project Architect takes the vision of the design team and leads the production team to create a biddable, buildable, code-compliant set of construction documents.
RESPONSIBILITIES/ESSENTIAL FUNCTIONS:
• Prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
• Monitor and oversee the construction documentation process including reviewing and approving shop drawings.
• Analyze building codes, space and site requirements, and other technical documents and reports to determine their effect on architectural designs.
• Meet with external contacts including clients, contractors, and engineers to identify and resolve problems.
• Meet with internal contacts including designers, production staff, project managers and architect of record to clarify design intent and streamline documentation process.
• Perform site visits at the construction site to confirm compliance with construction documents.
• Review and comment on applications for payment and change order requests.
• Perform code analysis and develop code strategies.
• Mark up and review shop drawings.
• Perform other related duties as required.
EXPERIENCE AND EDUCATION:
Bachelor's degree in architecture; or, equivalent combination of education and experience.
• 10 or more years of experience in Architecture required.
• Registered Architect License required.
• NCARB Certification preferred.
• AIA membership preferred.
• LEED AP BD+C accreditation preferred.
CORE COMPETENCIES AND SKILLS:
• Proficiency in AutoCAD and/or Revit.
• Knowledge of office standards and building codes.
• General knowledge of construction.
• Project management and organizational skills.
• Good judgement and decision-making skills.
• Problem solving skills with ability to develop and evaluate options and implement solutions to complex problems.
• Leadership, interpersonal, and communication skills to lead teams and interact with clients.
PHYSICAL FACTORS:
• Prolonged periods sitting at a desk and working on a computer.
• Must be able to lift up to 20 pounds at times.
• Construction site visits occur frequently and may require walking on uneven, rough terrain at times.
WORKING REQUIREMENTS (Travel Requirements, Overtime, Shifts, On-Call, etc.):
• This position may require work outside of typical working hours in order to respond to/address any issues that arise.
• Minimal travel to job sites and client meetings is required.
PI0d0bdbbb0b71-254
Job Description
You’re a licensed Professional Engineer (PE) with 5+ years of structural design experience, skilled at delivering robust, efficient, and safe structures. You thrive in collaborative, high-performing teams and want your expertise to make a tangible impact. At Sebago Technics — a 100% employee-owned, innovative firm — collaboration, technical excellence, and community impact are at the heart of everything we do. Here, your work matters, your expertise is recognized, and your professional growth is supported. We’re looking for an Experienced Structural Engineer who wants more than just a job—they want to lead design efforts, mentor junior engineers, and contribute to high-profile projects that shape Maine’s communities. If you’re ready to bring your advanced skills to projects while being part of a culture that values ownership, collaboration, and professional excellence — including our expanding mid-coast presence in Brunswick, Maine — this is the place for you.
RESPONSIBILITIES
- Lead structural design for projects, including steel, concrete, timber, and masonry systems, ensuring compliance with codes and standards.
- Perform advanced structural analysis using engineering software and manual calculations.
- Conduct construction administration services, including shop drawing review, site visits, and field observations.
- Coordinate design efforts with architects, contractors, and multidisciplinary project teams.
- Review and ensure quality and constructability of engineering deliverables.
- Assist in developing project scopes, budgets, and schedules.
- Serve as technical mentor to junior engineers and interns, providing guidance and professional development.
- Contribute to client communications, proposals, presentations, and project meetings.
- Support marketing staff with resumes, project profiles, and proposal materials.
KNOWLEDGE OF PROJECT OBJECTIVES
- Understand project schedules and budgets and complete assigned tasks in alignment with project goals.
- Communicate regularly with project managers and team members about design progress.
- Recognize project-specific requirements, such as permitting, accelerated schedules, or unique structural challenges.
- Ensure assigned designs meet performance, safety, and sustainability objectives.
CLIENT CONTACT
- Support senior engineers, project managers, and Regional Manager in client interactions.
- Represent Sebago Technics professionally at project meetings and site visits.
- Contribute to technical presentations for clients, contractors, or review authorities.
TRAINING AND CONTINUING EDUCATION
- Stay current with building codes, design practices, and engineering software.
- Participate in continuing education, training, and professional associations.
- Advance skills in structural analysis, BIM tools, and sustainability-focused design.
- Develop communication and project coordination skills through mentorship and training opportunities.
RECORD KEEPING
- Accurately track time, tasks, and expenses on project assignments.
- Document and store design computations, reports, and project correspondence.
- Support electronic and hard-copy record-keeping systems for quality assurance.
PROFESSIONAL RESPONSIBILITIES AND LIABILITIES
- Maintain knowledge of structural engineering practices, codes, and standards.
- Complete work in accordance with company policies and quality standards.
- Contribute to minimizing company liability by producing accurate, code-compliant designs.
- Represent Sebago Technics with professionalism and integrity.
- Complete work in accordance with company policies, quality standards, and project requirements.
- Represent Sebago Technics with professionalism and integrity.
- Embraces additional responsibilities as needed and may be asked to take on tasks beyond core duties, approaching all work with flexibility, professionalism, and a solutions-focused mindset.
What We’re Looking For
We want to connect with Structural Engineers who:
• Have 5+ experience designing steel, concrete, timber, and masonry structures.
• Hold a Bachelor’s degree in Civil or Structural Engineering (PE/SE preferred).
• Are proficient with structural analysis and BIM software (Revit, RAM, ETABS, RISA).
• Understand building codes, design standards, and constructability principles.
Physical Requirements
• Ability to perform occasional fieldwork, including site visits and construction inspections.
• Occasional lifting and carrying of field equipment or documents.
• Frequent use of computers for design, documentation, and reporting.
• Occasional day or overnight travel to project sites or client locations.
PI05c450cc394f-254
This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.
The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.
Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.
Must be local to TX
Role Overview
- He’s ideally looking for someone with 13+ years of experience, strong architecture depth, and the ability to clearly explain designs.
- Must have experience using AI is used in day‑to‑day development.
- Must have experience as a API Developer to lead the development and deployment of our backend services. In this role, you will be the bridge between our PostgreSQL database and React frontend, responsible not only for writing high-performance Python code but also for architecting the CI/CD pipelines that bring our applications to life. You will ensure our integration layers are scalable, secure, and automatically deployed.
Job Summary
We are seeking a Principal-level Full Stack Lead Developer with 13+ years of experience to drive high-priority engineering workstreams. This role is for a technical heavyweight who can lead new projects in parallel with existing leadership while maintaining exceptional architecture depth. You will be responsible for the full lifecycle of high-performance FastAPI and React applications, ensuring they are resilient, observable, and scalable. We expect a leader who views AI development tools as a force multiplier for velocity and can clearly articulate complex design decisions to stakeholders.
Key Responsibilities
- Project Sovereignty: Independently lead and deliver new, complex workstreams from inception to launch, acting as a technical peer to existing leadership (e.g., Sai).
- System Architecture: Design and defend distributed microservices and event-driven architectures. You must be able to clearly whiteboard and communicate design patterns to both technical and non-technical audiences.
- Hands-on Execution: Maintain high-velocity output of clean, production-grade code using FastAPI (Python) and React (TypeScript).
- Platform Reliability: Architect and implement global Error Handling frameworks, centralized Logging (e.g., OpenTelemetry, ELK), and API Management strategies including Rate Limiting and versioning.
- Event-Driven Messaging: Oversee the implementation of asynchronous service communication using ActiveMQ or AWS EventBridge.
- AI-Augmented SDLC: Deeply integrate AI coding tools (e.g., CloudCode, Cursor, GitHub Copilot) into daily workflows to accelerate prototyping, refactoring, and automated testing.
- Engineering Mentorship: Foster a culture of excellence through rigorous code reviews and by unblocking senior engineers on complex technical hurdles.
- Product Collaboration: Work closely with Product Managers to turn high-level roadmaps into technical reality, providing accurate estimates and identifying technical risks early.
Required Skills & Qualifications
- Experience:13+ years of professional software development with a proven track record of leading large-scale products.
- Tech Stack Mastery: Expert-level FastAPI (Async Python) and modern React (Hooks, TypeScript, Performance Profiling).
- Advanced Governance: Hands-on experience with API Gateway patterns, request throttling, and securing distributed systems (OAuth2/JWT).
- Observability & Messaging: Deep knowledge of structured logging, distributed tracing, and message brokers (ActiveMQ or EventBridge).
- AI Tooling: Advanced proficiency in using AI tools for Fast Development to reduce manual overhead and multiply team output.
- Database & Infrastructure: Expert-level PostgreSQL (tuning/indexing), Redis (for caching/rate-limiting), and container orchestration (Kubernetes/Docker).
- Communication: Exceptional ability to translate technical "scars" and architectural risks into clear business impact.
Job Summary:
We are seeking an experienced Embedded Software Design Engineer to support development and compliance of an Arm-based SoC embedded software platform in accordance with DO-178C DAL A safety-critical standards. The role involves understanding and maintaining an existing code base, performing software requirement analysis, architecture design, and ensuring complete lifecycle compliance including traceability, documentation, and configuration management.
Key Responsibilities:
- Understand, build, and maintain the Arm-based SoC embedded software code base.
- Ensure software development follows DO-178C DAL A safety-critical SDLC processes.
- Perform software requirements capture, analysis, and traceability.
- Develop software architecture and detailed design documentation.
- Update and maintain source code to meet DO-178C compliance.
- Support SDLC reviews and Pre-SOI audit activities.
- Prepare design analysis reports and resolve technical issues.
- Maintain requirements, design, code, and test traceability.
- Support configuration management and documentation activities.
Required Skills:
- 7+ years of experience in embedded software design and development.
- Strong experience with DO-178C DAL A safety-critical software lifecycle.
- Experience with software architecture, design, and requirement analysis.
- Knowledge of communication protocols: Ethernet, SPI, RS485, CAN, I2C.
- Hands-on experience with DOORS, Git, Matissa, MS Visio.
- Familiarity with AMD Vitis, ARM C Compiler, and Lauterbach Trace32.
- Experience with SDLC documentation and Pre-SOI audit processes.
Senior Platform Architect
Reports To: Director of Engineering
Department: Engineering
Location: Hybrid - Atlanta, GA
What makes MTech different:
Purpose-Driven Work – Build technology that solves real problems for the world
Casual & Collaborative – No corporate bureaucracy, direct access to senior leadership
Innovation-Focused – Healthy innovation pipeline expanding into new segments and technologies
Transparent & Data-Driven – Clear metrics, objectives, and visibility into company performance
Modern Development – Robust development tools, training programs, and technical excellence
Flexibility & Balance – Flexible work environment that values results over presenteeism
Job Summary
The Senior Platform Architect will lead the technical architecture, design, and modernization of large-scale, multi-tenant enterprise SaaS platforms built on Azure and the .NET stack. This role requires mastery of distributed systems, cloud-native design, and advanced engineering practices to deliver highly available, performant, and secure solutions for global consumer-facing SaaS and Agentic AI products.
Responsibilities and Duties
Architectural Design & Transformation
- Lead migration from monolithic systems to modular monolith and microservices architectures using domain-driven design, bounded contexts, and decomposition strategies.
- Design multi-tenant SaaS platforms with advanced tenant isolation, resource partitioning, and elastic scaling using Azure services.
- Define and enforce architectural standards for .NET (C#), TypeScript, Angular, SQL Server, and Azure, including dependency injection, SOLID principles, asynchronous programming, and reactive patterns.
- Design and implement distributed systems: service orchestration, API gateway management, IoT, edge computing, distributed transactions, eventual consistency, CQRS, and event sourcing.
- Architect for cloud-native resiliency: circuit breakers, bulkheads, retries, failover, geo-redundancy, and disaster recovery using Azure App Services, Azure Functions, Service Bus, Cosmos DB, and Azure SQL.
- Develop and maintain architecture documentation, reference models, and decision records using industry frameworks (TOGAF, Zachman, C4 Model).
Performance Engineering & Observability
- Establish and monitor platform SLOs (latency, throughput, error rates, availability) mapped to customer SLAs.
- Architect and implement advanced caching strategies, indexing, and query optimization for SQL Server and NoSQL stores in coordination with Senior Data Architect, Data Engineers, and Database Admins.
- Design and implement telemetry pipelines: distributed tracing (OpenTelemetry), structured logging, metrics collection, and real-time dashboards for system health and diagnostics.
- Conduct performance profiling, load testing, and capacity planning for backend services and frontend applications.
Automation, Quality, and DevOps
- Architect and implement CI/CD pipelines with automated build, test, security scanning, and deployment workflows.
- Integrate static code analysis, code coverage, and quality gates into the development lifecycle.
- Design and enforce automated testing strategies: unit, integration, contract, and end-to-end tests for backend and frontend components.
- Develop infrastructure as code (IaC) solutions for repeatable, scalable cloud provisioning.
- Create incident response playbooks for rollback, failover, and recovery, drive down MTTR and automate remediation where possible.
Security, Compliance, and Governance
- Architect for multi-tenant security: authentication/authorization (OAuth2, OpenID Connect), encryption at rest and in transit, secrets management, and compliance with SOC 1, SOC 2, GDPR, and other regulatory standards.
- Implement secure software development lifecycle (SSDLC) practices, threat modeling, and vulnerability management, including ZDR, DLP, No Model Training policies with AI Models.
- Ensure architectural governance and alignment with enterprise frameworks (TOGAF, Zachman), maintain architecture decision records, and participate in architecture review boards.
Technical Leadership & Collaboration
- Mentor engineering teams in advanced architectural concepts, distributed systems, cloud-native development, and best practices.
- Collaborate with Data Architect, DevOps, IT Services, Engineering and Product Management teams to ensure platform extensibility, integration, and support for complex business requirements.
- Evaluate and integrate AI/ML services, advanced analytics, and developer productivity tools to enhance platform capabilities.
- Champion a culture of technical excellence, continuous improvement, and innovation.
Required Experience & Skills
- Minimum 10+ years in software/platform engineering, with at least 8 years in platform architecture for enterprise SaaS on Azure and .NET tech stack.
- Proven experience architecting and delivering large-scale, multi-tenant SaaS platforms for global consumer-facing products.
- Deep expertise in .NET (C#), Azure cloud services (App Services, Functions, Service Bus, Cosmos DB, SQL Server), Azure Open AI, Microsoft Agent Framework, TypeScript, Angular, CI/CD, automated testing, and observability.
- Mastery of distributed systems, cloud-native patterns, event-driven architectures, and microservices.
- Demonstrated success in technical debt reduction, performance engineering, and architectural modernization.
- Experience with architectural frameworks (TOGAF, Zachman, C4 Model), architectural governance, and compliance.
- Strong understanding of platform security, regulatory compliance, and multi-tenant SaaS challenges.
Success Metrics (First 12 Months)
- Reduction in platform-related incidents/support tickets.
- Improvement in deployment speed and release velocity.
- Reduction in MTTR for platform incidents.
- Achievement of modularization milestones (monolith decomposition, service rollout, platform observability in production).
- Increase in automated test coverage, code quality, and system performance metrics.
Preferred Skills & Certifications
- TOGAF, Zachman, or similar architecture certification.
- Advanced knowledge of event sourcing, CQRS, service mesh, and cloud-native security.
- Familiarity with semantic technologies, knowledge graphs, and AI/ML integration.
- Hands-on experience with infrastructure as code, automated testing tools, and modern DevOps practices.
- Strong background in platform security, compliance, and multi-tenant SaaS challenges.
EEO Statement
Integrated into our shared values is MTech’s commitment to diversity and equal employment opportunity. All qualified applicants will receive consideration for employment without regard to sex, age, race, color, creed, religion, national origin, disability, sexual orientation, gender identity, veteran status, military service, genetic information, or any other characteristic or conduct protected by law. MTech aims to maintain a global inclusive workplace where every person is regarded fairly, appreciated for their uniqueness, advanced according to their accomplishments, and encouraged to fulfill their highest potential. We
Southern California | Full-Time | Engineering + Field Integration
$130K – $160K DOE + Benefits
Confidential Client – Wireless Infrastructure & Public Safety Systems
We are seeking a Design & Compliance Engineer to lead in-building DAS and ERRCS engineering with a primary focus on California Title 24 and IFC Section 510 compliance. This is not just a commissioning role.
This position owns the technical integrity of the system from design validation through AHJ approval.
The ideal candidate ensures systems meet public safety code requirements, recommends compliant product solutions, prepares engineering submittals, and value engineers projects while preserving performance and inspection approval.
Primary Role Overview
This engineer serves as the technical authority on:
- Code-compliant system design
- Product selection & specification
- AHJ coordination
- Submittal preparation
- Coverage validation
- Value engineering
- You ensure systems are engineered correctly the first time and pass inspection.
Core Responsibilities
1. Engineering & Compliance Oversight
• Review and validate DAS / ERRCS RF designs for code compliance
• Ensure systems meet CA Title 24, California Fire Code (IFC 510), and local AHJ standards
• Validate minimum signal strength (-95 dBm or jurisdictional requirement)
• Ensure grid testing percentages meet jurisdictional coverage thresholds
• Confirm critical area coverage (stairwells, fire command centers, elevator lobbies, etc.)
• Interpret fire department amendments and jurisdiction-specific variations
• Interface directly with AHJs to resolve technical requirements
2. Product Specification & Recommendation
• Recommend compliant DAS / ERRCS equipment based on project conditions
• Evaluate OEM solutions (JMA, SOLiD, ADRF, CommScope, etc.)
• Ensure battery backup, monitoring, fiber/coax pathways, and survivability requirements meet code
• Prepare detailed Bill of Materials (BOM)
• Provide technical guidance to PMs and installation teams
3. Submittals & Documentation
• Prepare engineering submittals for AHJ review
• Generate RF design documentation using iBwave
• Provide compliance letters and engineering narratives
• Support permit submission packages
• Coordinate redlines and design revisions
• Produce acceptance testing documentation
4. Value Engineering
• Identify cost-efficient alternatives without compromising compliance
• Optimize amplifier placement and antenna layout
• Reduce overdesign while maintaining inspection success
• Provide technical trade-off analysis when necessary
5. Field Validation & Commissioning Support
• Conduct RF site surveys and grid testing
• Oversee commissioning and optimization
• Support final acceptance inspections
• Coordinate annual testing documentation as required
Required Qualifications
• Position Requirements:
- NICET Level III In-Building Public Safety Communications Certification
- NICET Design Public Safety Communications Certification
- IBWAVE Certification
- PCTEL Certification
- Has been involved with projects in California
- Vendor relationships
- AHJ relationships
- Some sales or sales support experience
- Fire alarm experience/knowledge, nice to have but not critical
- Ability to grow a new division
- Valid driver’s license & travel flexibility
Preferred Qualifications
• iBwave certification
• FCC GROL License
• NICET - In-Building Public Safety Communications
• DAS OEM Certifications (JMA, SOLiD, CommScope, ADRF, etc.)
• OSHA 10/30
• Fiber & coaxial termination/testing experience
What Makes Someone Successful Here
• Understands California compliance-driven DAS deployments
• Comfortable working between engineering and field operations
• Able to work directly with inspectors, fire officials, and project stakeholders
• Strong troubleshooting mindset with attention to detail
• Executes with accountability and professionalism
Why This Role
• Work on high-profile commercial & public safety projects
• Strong engineering support and stable project pipeline
• High-demand niche skillset (ERRCS / Title 24 expertise)
• Competitive salary + full benefits
Interested?
This is a confidential search. Apply or comment DAS on the post and we will reach out for more details and to discuss fit.
PFS TECO is seeking an experienced MOD Plans Examiner to join our Manufactured Structures Division in Cottage Grove, WI.
In this role, you will review modular construction plans and engineering documentation to ensure compliance with ICC building codes and modular construction standards.
We are looking for a professional who enjoys applying building code expertise to real-world construction projects and collaborating with manufacturers and engineers across the country.
Responsibilities
• Review modular residential and commercial construction plans
• Prepare plan review reports and identify compliance issues
• Provide code interpretation to manufacturers and engineers
• Coordinate with internal inspection teams to ensure consistent code application
Qualifications
• ICC B3 – Building Plans Examiner certification required
• 2–3 years experience in modular construction, plan review, or building inspection
• Strong ability to interpret construction drawings and engineering documents
• Strong analytical and communication skills
Why Join PFS TECO
• Work with modular manufacturers nationwide
• Apply your ICC expertise to specialized construction projects
• Opportunities for additional ICC certifications and professional development
• Part of NFPA Global Solutions, a global organization advancing safety in the built environment
Apply Now: PFS TECO Career Page
Location: In-person – Cottage Grove, WI
