Mini Circuits Jobs in Usa
678 positions found — Page 39
Date Posted:
2026-02-26Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Job Description:
The Advanced Radar Products Department empowers people to deliver innovative, affordable and producible products and technologies to support airborne Radar solutions throughout the full product lifecycle while remaining accountable for program execution cost, schedule, and performance. We provide best in industry technologies that align product capabilities to the needs of our customers and end- users. As an Electrical Engineer II supporting production, you will be part of a team of highly talented engineers that work on highly complex Radar products and test sets. You will be working as a member of a production support team and under the guidance of an Integrated Product Team (IPT) Lead in McKinney, Texas.
What You Will Do:
- Managing component obsolescence identification and mitigation
- Troubleshooting test sets down to component level to include analog and digital interfaces, etc. Includes software
- Troubleshooting hardware and process issues down to circuit card assembly (CCA)/Module and component levels to include analog/digital/RF/power circuitry and interfaces.
- Work in a team environment to ensure the production and sustainment timelines are maintained.
- Analysis of test data of products to make sure test specifications are met.
- Reading and interpreting and applying engineering drawings, including assembly drawings, parts lists, wire lists, and schematics.
- This position requires daily on-site support and is not open to remote work possibilities
Qualifications You Must Have:
- Typically requires a Bachelor's Degree in Science, Technology, Engineering or Mathematics.
- A minimum 2 years of prior relevant experience with electronics and electrical circuits as well as ability to isolate failures to root cause.
- Experience reading & interpreting drawings and electrical schematics
- Experience with lab equipment such as multimeters, signal sources, oscilloscopes, spectrum analyzers, and logic analyzers
- Experience working on a production program
- The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Qualifications We Prefer:
- Experience with supplier engagement
- Experience with documenting test results and engineering recommendations clearly and concisely
- Excellent interpersonal and communication skills
- Experience with Mentor Graphics, Matlab, or PSPICE
- Ability to work in a team environment and communicate with leadership and colleagues.
What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Duties and Responsibilities Checks and replaces faulty switches, sockets, and other simple elements of electrical systems such as lighting fixtures, tubes, and ballasts.
Connects wiring to fixtures and power equipment; splices wires as required.
Inspects and tests electrical lighting, signal, communication, and power circuits.
Isolates defects in wiring, switches, motors, and other electrical equipment.
Measures, cuts, threads, and installs electrical Panduit.
Pulls wiring through conduit.
Ability to pull, build and loom wire harness Wire relays and terminal blocks Wiring of 110v outlets, CAT6 data, thermostats, 110v LED lighting and light switches.
12v automotive electrical, alarms, backup camera, stereo installation, and 12v fuse blocks.
Performs miscellaneous job-related duties as assigned.
Knowledge, Skills, and Abilities Required Knowledge of low voltage electrical systems and basic wiring principles.
Ability to apply NEC standards.
Ability to use hand and power tools applicable to trade.
Ability to isolate defects in wiring, switches, motors, and other electrical equipment.
Ability to measure, cut, thread, pull, and install electrical conduit.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Com068 Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This shift operates Monday through Friday from 7 AM until 3:30 PM.
Pay is based on experience, must have an updated resume.
The associate will perform all soldering, bonding, wiring, routing, assembly, disassembly, touch-up, rework, cleaning, and minor modifications, assemblies and sub-assemblies within the facility using electronic parts and components and a variety of hand tools.
The associate will work from approved visual aids, change notices (CN's), deviations and routes and/or any engineer-approved changes that apply to them.
Solderers will also move the completed product to the next production operation.
You will also use various measuring instruments and equipment to perform a visual and dimensional inspection of printed circuit boards, harnesses, sub-assemblies, and assemblies.
Inspects assemblies after machine soldering and complete required paperwork, logs, and records.
ESSENTIAL DUTIES AND RESPONSIBILITIES Perform manual and automated soldering of electronic components onto printed circuit boards Read and interpret technical drawings, schematics, and work instructions Set up and operate soldering equipment, including wave soldering machines and reflow ovens Inspect solder joints and completed assemblies for quality and conformance to specifications Clean and maintain soldering equipment and work area REQUIREMENTS Previous experience in electronic soldering, preferably in a manufacturing environment Ability to follow verbal and written instructions in English Proficiency in various soldering techniques, including through-hole and surface mount technology Ability to identify electronic components Ability to frequently lift/carry products weighing up to 50 lbs.
Ability to read and understand technical documents and schematics Strong attention to detail and commitment to quality Good hand-eye coordination and manual dexterity Good time management and organizational skills OTHER SKILLS AND ABILITIES Must complete soldering training course and pass soldering proficiency test Ability to maintain hourly run rates in a fast-paced environment Basic Math Electrostatic Discharge (ESD) training Electronic component identification training Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
Required Skills: •3 years of analog circuit design (Internship experience ok) • BA Degree •Ability to read and interpret engineering documentation (such as Interface Control Documents (ICDs), electrical schematics, CAD models, and assembly level engineering drawings) •Systems engineering experience in requirements and verification •Circuit Failure Mode Analysis • Visio •Willingness to travel (AL, CO, CA, PA...) •Active Secret Clearance Custom Fields: Name: Work Schedule Value: 4/10-1st Shift Name: Security Clearance Value: Interim Secret Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS AND DUTIES Working under general technical guidance, an Electronic Technician II specializes in ground-based electronic systems and works on various types of electronic equipment and related devices through a combination of installing, maintaining, repairing, overhauling, troubleshooting, modifying, construction, and testing Employee will be responsible for the following functions/duties: Operate and maintain electronic transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, circuit cards, high-voltage power supplies and keying circuits, indicators and displays, and antenna positioning systems Apply technical knowledge of electronic principles to solve basic electronic, communication, and mechanical problems using diagrams, schematics, engineering data, and test equipment Diagnose equipment malfunctions and effect repairs to restore equipment to required operating condition Set up, operate, and program ground-based electronic systems Manipulate computer peripherals while interpreting computer displays Troubleshoot to the component level and make needed repairs Document maintenance actions and complete logistic documentation for replacement parts Reporting mission operations and maintenance findings to management team through end of shift reports Provides technical guidance to junior technicians Communicate with engineers and vendors to resolve advanced issues Perform other job-related duties, as required.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Education and/or training from an accredited college or technical school with courses in math, basic electronics, and microwave theory, or a military equivalent and three (3) years of hands-on experience are required for this position.
In addition, an Electronic Technician II must possess the following qualifications: Demonstrated proficiency in general electronics Good understanding of electronic, electro-mechanical, and computer systems Good understanding of information technology w/an emphasis on networking Good understanding of electronic and radio frequency (RF) test equipment used to maintain and repair equipment Experience with tubes, transistors, logic gates, and/or high-power RF devices Demonstrated ability to identify system subassemblies, troubleshoot to the component level, and a competency in soldering.
SALARY The Area Wage Determination (AWD) for this position is $34.86 per hour.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee will be required to work some shift work, at remote locations, and occasional over-night assignments.
Work is performed both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Grease or oil may be found on working surfaces.
Outdoor duties may be performed on gravel or shingled roof.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs., (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JELT4, JOM68; A2NTTR
Northrop Grumman Mission Systems is seeking Sensors and Systems Technicians to join its Manufacturing Organization. This position is located in Linthicum, Maryland.
The Sensors and Systems Technician will perform a variety of simple to complex tasks involving testing, operating, trouble-shooting calibrating, constructing, repairing and assembly over a broad spectrum of technologies, utilizing manual and automatic equipment, Utilize and create repair techniques, assembly techniques and procedures. Other tasks to be performed include: collecting, recording, analyzing and evaluating data and recommending changes in processing operations and equipment as appropriate.
Must have extensive knowledge of electronics principles.
A high degree of skill in fabrication and test of complex components, assemblies, devices, circuits and systems.
Be capable of readily adapting to changing assignments and requirements.
Be capable of meeting 09 solder certification and successfully passing pre-employment skills screening.
Must be able to obtain and maintain a required Security Clearance.
This is an IBEW union represented position.
#MPR
Basic Qualifications:
High School Diploma/GED.
Graduate of a two year, full time electronic technology school OR six months military electronics school plus two years working in the maintenance and repair of electro-mechanical equipment.
Experience Requirement:
Must have extensive knowledge of electronics principles.
A high degree of skill in fabrication and test of complex components, assemblies, devices, circuits and systems.
Be capable of readily adapting to changing assignments and requirements.
Be capable of meeting 09 solder certification and successfully passing pre-employment skills screening.
Must be able to obtain and maintain a Secret clearance.
PCB INSPECTOR
Location: Brea, CA
Work schedule: 1st shift and 2nd shift available
QUALIFICATIONS
- Minimum 2 years of PCB inspection experience in electronics manufacturing.
- Ability to read blueprints, drawings, specifications and PCB gerbers.
- Skilled in electrically measuring resistors and capacitors.
- Expertise in reading component values by inspecting parts.
- Knowledge of various computer programs (Microsoft Excel, Word, Outlook and Adobe).
Summary:
The Final Inspector - Level III will perform visual, electrical and dimensional inspection of printed circuit board assemblies; will be responsible for performing receiving inspections of outsourced processes and final assembly inspections while recording results and preparing various quality documents. Candidates must be able to work a minimum of 6 hours per day under a microscope.
Responsibilities:
- Read blueprints and/or engineering specifications to obtain information such as specified material, electrical, cosmetic requirements and workmanship instructions.
- Perform visual and dimensional inspections of printed circuit board assemblies to ensure workmanship which complies with the appropriate requirements from engineering drawings, process specifications, IPC-610 standards, J-STD-001 and customer specific criteria.
- Performs inspection on electrical or electronic components by using electrical meters or instruments to confirm adherence to electrical specifications.
- Performs inspection of conformal coating under both black and white light.
- Perform and record results of first article inspections of boards after Thru-Hole.
- Perform sub-assembly, box build, shipping, and receiving inspection as required.
- Assist in failure investigations, root cause analysis and corrective action activities and quality improvement projects.
Job Title: Electrical Design Engineer
Job ID: 72121
Position Type: Fulltime
Location: Minneapolis, MN
Position Overview
We are seeking an experienced Electrical Design Engineer to join our medical device development team. The ideal candidate will have strong expertise in hardware design, testing, verification, and compliance for regulated medical products.
Key Responsibilities
- Contribute to medical device design and development.
- Work with analog, digital, power, and RF circuits, including reading, analyzing, and reviewing schematics and PCB layouts.
- Collaborate closely with the firmware/embedded software team to ensure seamless system integration.
- Develop and execute Test Methods, perform Test Method Validation (TMV), and generate comprehensive TMV reports.
- Plan, support, and execute EMC testing for medical devices, interpreting results and ensuring compliance.
- Create and maintain detailed test protocols, test plans, and test reports.
- Perform verification and validation (V&V) testing at the subsystem and system levels.
- Communicate effectively with internal teams, external vendors, and regulatory partners.
Required Skills & Qualifications
- Proven experience in medical device development.
- Strong understanding of analog, digital, power, and RF circuit design and layout review.
- Hands‑on experience with TMV, test execution, and documentation.
- Prior knowledge of EMC testing for medical devices.
- Experience in V&V testing, including writing and reviewing protocols and reports.
- Strong written and verbal communication skills.
- Ability to work in a highly regulated environment with attention to detail.
Pay and Benefits
Pay Range Minimum: $83000 per year
Pay Range Maximum: $128000 per year
HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.
Compensation and Benefits
A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.
How You’ll Grow
At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.
Primary Skills: Circuit Design (Expert), Embedded Security (Expert), Testing Equipment (Proficient), Cryptography (Knowledgeable), PCB Analysis (Intermediate)
Contract Type: W2
Duration: 12 months with possible extension
Location: Seattle, WA ()
Pay Range: $105.00 - $120.00 per hour
#LP
Job Summary:
We are seeking a highly skilled Hardware Security Engineer IV with extensive experience in electrical engineering and hardware security for role which is fully onsite in Seattle, WA, US. This role involves collaboratively working on hardware security assessments for emerging devices, ensuring robust privacy and security protocols. The ideal candidate will bring a deep understanding of electrical engineering principles to spearhead our efforts in maintaining and enhancing the security of our devices and services.
Key Responsibilities:
- Conduct thorough hardware security assessments and provide actionable insights.
- Design, test, and analyze circuit designs and PCB layouts with an eye on security.
- Develop and implement secure boot solutions and cryptography measures.
- Collaborate with third-party manufacturers to update and secure device designs.
- Utilize common electronics test equipment for testing, debugging, or hacking hardware.
- 5+ years of experience in hardware security, embedded systems security, or similar
- Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or related technical field.
- hands-on experience with common test equipment: Oscilloscopes, multimeters, microscopes, logic analyzers, soldering
- Experience with manufacturing security processes, including secrets provisioning and secure production flows, is highly desirable.
- Previous work in a team environment focusing on hardware security for telecom or consumer electronics industries.
Akraya is an award-winning IT staffing firm consistently recognized for our commitment to excellence and a thriving work environment. Most recently, we were recognized Inc's Best Workplaces 2024 and Silicon Valley's Best Places to Work by the San Francisco Business Journal (2024) and Glassdoor's Best Places to Work (2023 & 2022)!
Industry Leaders in IT Staffing
As staffing solutions providers for Fortune 100 companies, Akraya's industry recognitions solidify our leadership position in the IT staffing space. We don't just connect you with great jobs, we connect you with a workplace that inspires!
Join Akraya Today!
Let us lead you to your dream career and experience the Akraya difference. Browse our open positions and join our team!
This Jobot Job is hosted by: Gene Choi
Are you a fit? Easy Apply now by clicking the "Apply" button
and sending us your resume.
Salary: $70,000 - $120,000 per year
A bit about us:
Our client is a well-established and growing MEP engineering firm located in Tampa, FL and their services include electrical engineering, lighting design, mechanical engineering, low voltage systems, renewable energy and commissioning. They have completed hundreds of projects for all types of buildings and facilities.
Why join us?
- Competitive Base Salary!
- 401K, PTO, and excellent benefits!
- Accelerated Career Growth!
Job Details
- Minimum 7 years of project design experience
- Knowledge and practicing use of AutoCAD and/or Revit
- Ability to develop and produce drawings independently
- Performs layouts of devices and equipment
- Performs circuiting of lighting, devices, and equipment
- Coordinates layout and power requirements of mechanical equipment
- Sizes electrical panelboards, circuit breakers, conduits, and conductors
- Performs layout of fire alarm appliances and devices
- Knowledge and experience of working with low voltage systems such as IT/audio-visual, security, etc., is a plus
- Ability to edit specifications with oversight of Senior PE
- Knowledge and use of lighting software such as AGi32 is a plus
- Experience in either SKM or EasyPower is a plus
- Experience in reviewing submittals and responding to RFIs
- Ability to perform site punch-lists and develop a construction observation report
- Good communicative skills and can communicate directly with clients
- Ability to manage work on multiple projects simultaneously
- Abreast of latest trends in Electrical engineering, Florida Building Code, and National Electrical Code
- Bachelor’s degree in Electrical Engineering is strongly preferred
- EI or PE registration is a strong plus
Interested in hearing more? Easy Apply now by clicking the "Apply" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
