Mini Circuits Amplifiers Jobs in Usa
874 positions found — Page 67
S
Fire Service Technician
Salary not disclosed
THE POSITION IN A NUTSHELL
Sciens Building Solutions is seeking an experienced Fire Service Technician in Vermont with programming, troubleshooting, and repair capabilities and experience. This position will work closely with our service team, and clients to ensure our critical life safety systems are repaired in an efficient manner to maintain their overall performance. This is a key position for our growing team and requires attention to detail in all aspects of system troubleshooting and repair. Customer and employee interface requires a high degree of effective human relations. Communication skills, both written and verbal, are important elements of the position.
WHAT YOU’LL BE DOING (and doing well!)
- Troubleshooting and repairing Fire and Life Safety systems, including conventional, addressable, voice systems, complex smoke control, and networked solutions.
- Use a variety of troubleshooting tools to analyze systems and detect fault conditions.
- Ensure maximum system detection and alarm coverage when effecting repairs.
- Produce repair reports in accordance with NFPA for customer acceptance and billing information.
- Programming systems via laptop computers.
- Ensure Fire Alarm circuit integrity.
- Assist in managing vehicle inventory and repair tools.
- Provide support, guidance, and expertise to other technicians.
WHAT WE LIKE ABOUT YOU·
- Two to five years of experience in a repair or systems technician role within the Fire Life and Safety industry.
- Knowledge of current fire alarm systems, including smoke control, graphic user interfaces, and networked solutions.
- Demonstratable knowledge of Fire Alarm circuit integrity and how to troubleshoot for circuit opens, shorts, and/or ground conditions.
- Ability to program and repair fire alarm systems using a laptop computer.
- Knowledgeable in NFPA 72 code requirements.
- Intermediate knowledge of Article 760 of NFPA 70 (Electrical Code) for the installation of fire systems and circuiting.
- Knowledgeable of state, federal, and other regulatory requirements for testing of fire alarm systems.
- Ability to demonstrate proper operation of equipment and control units to customers and explain how it is to be used, and how to respond to any systems signals.
- Ability to read fire system design drawings.
- Demonstrable knowledge of the safe use of standard trade tools.
- NICET I Certification
- Ability to train and develop other Service Technicians on equipment, company policies, and procedures.
- Knowledge of OSHA safety standards and able to obtain OSHA 10 Certifications.
- Customer-focused; skilled in project and people management.
- Proficient in issue resolution
- Excellent organizational, decision-making, and communication skills
- Ability to work under tight deadlines and with a sense of urgency.
- Be physically fit to perform the demanding work of the trade, including frequent lifting of up to 25 pounds, maximum occasional lifting up to 50 pounds; able to work from heights and climb ladders; standing and walking for
- most of the workday.
- Valid driver’s license & reliable transportation
- Must have a master electricians, journeymans electrician license or G7(c) Type S Fire Alarm and TQP-T1 for inspecting alarm systems
WHAT WE'RE BRINGING TO THE TABLE
- Sign-on Bonus
- Competitive salary based on qualifications.
- Paid time off plan and holidays.
- 401(k) matching.
- Short term and long-term disability.
- Medical, dental, and vision plans with options.
- Life insurance.
- Company cell phone, laptop, and vehicle.
- Professional career development opportunities.
- Tuition Reimbursement
$40-$45/hour
Not Specified
J
Telemetry Field Engineer
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Under the general supervision of senior-level engineers, a Telemetry Field Engineer performs a variety of fundamental field engineering tasks involved in the design, development, installation, operations, testing, and maintenance of telemetry equipment and systems.
Employee will be responsible to perform the following functions/duties: Support the design, integration and testing of fixed and mobile telemetry acquisition systems and equipment in the L, S, C and P frequency bands Specify antennas, recorders, distribution amplifiers, low-noise amplifiers (LNAs), receivers and various RF components associated with telemetry acquisition systems Assist field technicians and / or operators with operations and maintenance as required Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to telemetry engineering Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist with preparation of drawings, documentation, reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings Attend annual International Telemetry Conference (ITC) Perform other job-related duties, as required.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 7 years of technical/professional experience in telemetry and / or RF engineering are required for this position.
In addition, a Telemetry Field Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Experience with computer networking, including networking methods of the transport of telemetry data over IP (TMoIP) is a plus Familiarity with Aeronautical Mobile Telemetry (AMT) and Range Commanders Council (RCC) IRIG standards: 106
- Telemetry Standards and 118
- Test Methods for Telemetry Systems and Subsystems Working knowledge of Terrain Analysis Program (TAP) RF software is a plus Working knowledge of MS Visio and / or AutoCAD is a plus Working knowledge of MS Office suite, particularly Word, Excel and Powerpoint Strong technical skills with aptitude and motivation to continuously learn and apply new technologies Effective verbal and written communication skills Planning, organizational and teamworking skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA’s Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Work will also be performed in a field environment; all information and training will be given that is needed prior to entering this environment.
Occasional lifting (up to 25 pounds), consistent sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations will be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A3UTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Under the general supervision of senior-level engineers, a Telemetry Field Engineer performs a variety of fundamental field engineering tasks involved in the design, development, installation, operations, testing, and maintenance of telemetry equipment and systems.
Employee will be responsible to perform the following functions/duties: Support the design, integration and testing of fixed and mobile telemetry acquisition systems and equipment in the L, S, C and P frequency bands Specify antennas, recorders, distribution amplifiers, low-noise amplifiers (LNAs), receivers and various RF components associated with telemetry acquisition systems Assist field technicians and / or operators with operations and maintenance as required Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to telemetry engineering Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist with preparation of drawings, documentation, reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings Attend annual International Telemetry Conference (ITC) Perform other job-related duties, as required.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 7 years of technical/professional experience in telemetry and / or RF engineering are required for this position.
In addition, a Telemetry Field Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Experience with computer networking, including networking methods of the transport of telemetry data over IP (TMoIP) is a plus Familiarity with Aeronautical Mobile Telemetry (AMT) and Range Commanders Council (RCC) IRIG standards: 106
- Telemetry Standards and 118
- Test Methods for Telemetry Systems and Subsystems Working knowledge of Terrain Analysis Program (TAP) RF software is a plus Working knowledge of MS Visio and / or AutoCAD is a plus Working knowledge of MS Office suite, particularly Word, Excel and Powerpoint Strong technical skills with aptitude and motivation to continuously learn and apply new technologies Effective verbal and written communication skills Planning, organizational and teamworking skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA’s Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards.
Work will also be performed in a field environment; all information and training will be given that is needed prior to entering this environment.
Occasional lifting (up to 25 pounds), consistent sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations will be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JENG17; A3UTTR
Not Specified
B
Solder Assembler (5yrs soldering needed)
Salary not disclosed
Solder Assembler (5yrs Soldering needed) Location: Oldsmar, FL (34677) Job ID: #72160 Pay Range: $20-25 Pay based on experience 1st Shift
- Mon
- Thurs 500am
- 330pm 4-10hr days, some overtime on FRIs or SATs Required: 5+ years of soldering experience.
Experience doing rework, Surface Mount Technology, advanced techniques -Experience working with IPC-A-610 and IPC-J-STD Certification not needed Open to US Citizens & US Permanent Residents THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Job Summary: We are seeking a highly skilled Solder assembler to join our team, specializing in advanced rework on circuit card assemblies and knowledge of mechanical assembly related to circuit cards.
The ideal candidate will have a strong background in soldering and rework techniques, with the ability to work on complex electronic assemblies.
If you have a keen eye for detail, excellent hand-eye coordination, and a passion for precision electronics work, we encourage you to apply.
Key Responsibilities:
* Perform advanced rework on circuit card assemblies, including but not limited to:
* BGA (Ball Grid Array) reballing and replacement
* QFN (Quad Flat No-Lead) and other leadless package rework
* High-density connector rework and repair
* Complex SMT (Surface Mount Technology) component replacement
* Through-hole and surface mount technology (SMT) components
* Fine pitch and high-density components
* Utilize various soldering techniques, including hand soldering and reflow soldering
* Uses microscope to verify correct part placement and orientation
* Inspect and troubleshoot assemblies to identify defects and areas for improvement
* Develop and implement rework procedures for new and existing products
* Collaborate with engineering teams to resolve design and manufacturing issues
* Perform mechanical assembly operations, including:
* Installing stand-offs, spacers, and other hardware
* Assembling and aligning complex mechanical components
* Using adhesives, epoxies, and other bonding agents
* Maintain a clean and organized workspace, adhering to safety and quality standards Requirements:
* 5+ years of experience in soldering and rework, with a focus on advanced techniques
* Strong understanding of electronics assembly and repair principles
* Proficiency with soldering equipment, including but not limited to:
* Soldering irons and stations
* Reflow ovens and soldering machines
* Experience with inspection and testing equipment, such as microscopes and X-ray machines
* Excellent hand-eye coordination, fine motor skills, and attention to detail
* Ability to work in a fast-paced environment, meeting production deadlines and quality Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
- Mon
- Thurs 500am
- 330pm 4-10hr days, some overtime on FRIs or SATs Required: 5+ years of soldering experience.
Experience doing rework, Surface Mount Technology, advanced techniques -Experience working with IPC-A-610 and IPC-J-STD Certification not needed Open to US Citizens & US Permanent Residents THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Job Summary: We are seeking a highly skilled Solder assembler to join our team, specializing in advanced rework on circuit card assemblies and knowledge of mechanical assembly related to circuit cards.
The ideal candidate will have a strong background in soldering and rework techniques, with the ability to work on complex electronic assemblies.
If you have a keen eye for detail, excellent hand-eye coordination, and a passion for precision electronics work, we encourage you to apply.
Key Responsibilities:
* Perform advanced rework on circuit card assemblies, including but not limited to:
* BGA (Ball Grid Array) reballing and replacement
* QFN (Quad Flat No-Lead) and other leadless package rework
* High-density connector rework and repair
* Complex SMT (Surface Mount Technology) component replacement
* Through-hole and surface mount technology (SMT) components
* Fine pitch and high-density components
* Utilize various soldering techniques, including hand soldering and reflow soldering
* Uses microscope to verify correct part placement and orientation
* Inspect and troubleshoot assemblies to identify defects and areas for improvement
* Develop and implement rework procedures for new and existing products
* Collaborate with engineering teams to resolve design and manufacturing issues
* Perform mechanical assembly operations, including:
* Installing stand-offs, spacers, and other hardware
* Assembling and aligning complex mechanical components
* Using adhesives, epoxies, and other bonding agents
* Maintain a clean and organized workspace, adhering to safety and quality standards Requirements:
* 5+ years of experience in soldering and rework, with a focus on advanced techniques
* Strong understanding of electronics assembly and repair principles
* Proficiency with soldering equipment, including but not limited to:
* Soldering irons and stations
* Reflow ovens and soldering machines
* Experience with inspection and testing equipment, such as microscopes and X-ray machines
* Excellent hand-eye coordination, fine motor skills, and attention to detail
* Ability to work in a fast-paced environment, meeting production deadlines and quality Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Not Specified
S
Journeyman \u0026 Apprentice Electricians
Salary not disclosed
Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm.
We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics.
Staff Experts, LLC is currently seeking to fill Journeyman & Apprentice Electrician positions.
If you are interested, please email us your resume and call 52 to schedule an interview appointment.
Journeyman Electrician Experience: Journeyman Electrician: 5+ years Installing raceways.
(PVC, EMT, RIGID, FLEX, MC) Able to read blueprints, legend symbols, scale of plan, branch circuits, one-line and riser diagram.
Proficient with reading blueprints color coding for high/low voltage.
Strong working knowledge of A-sheets, reflective ceiling, and detail drawings for layouts.
Must be able to make multiple circuits with multiple ground conductors.
Completion of all installations per all current electrical codes Apprentice Level 1– 5 years Must be able to install PVC, EMT, RIGID, FLEX, MC Must be capable of making multiple electrical circuits with multiple ground conductors Must be able to trim out fixtures with minimal supervision Detail-oriented with strong communication skills Must be able to read blueprints Staff Experts, LLC is an Equal Opportunity Employer.
Contact Information: Staff Experts, LLC (Brighton Branch) 36 South 18th Avenue, Suite D Brighton, CO 8 Office 52 Fax
We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics.
Staff Experts, LLC is currently seeking to fill Journeyman & Apprentice Electrician positions.
If you are interested, please email us your resume and call 52 to schedule an interview appointment.
Journeyman Electrician Experience: Journeyman Electrician: 5+ years Installing raceways.
(PVC, EMT, RIGID, FLEX, MC) Able to read blueprints, legend symbols, scale of plan, branch circuits, one-line and riser diagram.
Proficient with reading blueprints color coding for high/low voltage.
Strong working knowledge of A-sheets, reflective ceiling, and detail drawings for layouts.
Must be able to make multiple circuits with multiple ground conductors.
Completion of all installations per all current electrical codes Apprentice Level 1– 5 years Must be able to install PVC, EMT, RIGID, FLEX, MC Must be capable of making multiple electrical circuits with multiple ground conductors Must be able to trim out fixtures with minimal supervision Detail-oriented with strong communication skills Must be able to read blueprints Staff Experts, LLC is an Equal Opportunity Employer.
Contact Information: Staff Experts, LLC (Brighton Branch) 36 South 18th Avenue, Suite D Brighton, CO 8 Office 52 Fax
internship
J
Field Service Technician Level 2 (NETA)
🏢 Jobot
Salary not disclosed
Relocation Provided | Sign on Bonus This Jobot Job is hosted by: Christian Aviles Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $35
- $50 per hour A bit about us: Our client provides electrical and mechanical services, specializing in the repair, maintenance, and refurbishment of industrial rotating equipment such as motors, generators, and transformers.
Why join us? 3 weeks Paid Time Off (PTO) 11 Paid Holidays 401k Employer Match Bonus Incentives Tuition Reimbursement Program Medical, Dental and Vision plans Employee Assistance Program (EAP) NETA training and certification NICET certification Job Details Description Are you a hands-on problem solver who loves to travel and provide exceptional customer service? We are seeking a dynamic Field Service Technician to join our team.
In this role, no day will be the same.
You'll troubleshoot, repair, and maintain equipment while delivering top-notch service to our customers.
You’ll be able to work alongside some of the best technicians in the industry utilizing the latest technology tools and equipment Responsibilities & Expectations: As a Field Service Technician in our PowerServe division, you will perform testing and maintenance on low, medium and high voltage power distribution equipment for our commercial and industrial clients.
We are NETA accredited and perform testing under NETA standards to ensure reliability, safety and efficiency.
Testing and Calibrations: •Instrument Transformer •Power Transformer testing – Doble, Insulation Resistance, Transformer Turns Ratio (TTR) •Cable testing including Power Factor, Tan Delta, VLF, Hipot •Circuit breaker & Switchgear testing of low, medium & high voltage •Primary & Secondary Injection Testing •Protective Relay testing including electro-mechanical and solid state •Continuity, Ground Fault •Power Quality Troubleshooting, inspecting, start-ups and collect data on: switchgear, circuit breakers, cables, transformers, protective relays, VFDs, ATS Service & Repair: Inspections, diagnosis of issues, replace parts, make recommendations, recommissioning Safety: adhere to all safety protocols including LOTO Teamwork: contributes to a strong team environment through assisting teammates in accomplishing mutual goals Customer Service: communicate all information to customers in a way they understand the issues & resolutions Documentation: complete reports on the work you have completed Don’t have all these skills yet…no worries as we have a successful training program to get you the training and certifications you need.
However, you will need the below qualifications and competencies.
Qualifications and Competencies: Associate degree from an accredited 2-year technical college in Electrical Power, or similar experience/training from the military (Army Prime Power, Air Force Electrical Power Production, or NAVY Seabee) preferred Must have some testing experience of low and medium voltage switchgear, circuit breakers, transformers and/or protective relays.
NETA Certification (II, III) highly preferred or equivalent skills/experience to become NETA Certified Power DB experience a plus Requires 3+ years of driving experience along with a valid driver’s license and acceptable driving record Good communication and customer service skills Ability to read and interpret schematics, operating manuals and safety guidelines Ability to work flexible hours, overtime and weekends as required, willingness to be on call Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $35
- $50 per hour A bit about us: Our client provides electrical and mechanical services, specializing in the repair, maintenance, and refurbishment of industrial rotating equipment such as motors, generators, and transformers.
Why join us? 3 weeks Paid Time Off (PTO) 11 Paid Holidays 401k Employer Match Bonus Incentives Tuition Reimbursement Program Medical, Dental and Vision plans Employee Assistance Program (EAP) NETA training and certification NICET certification Job Details Description Are you a hands-on problem solver who loves to travel and provide exceptional customer service? We are seeking a dynamic Field Service Technician to join our team.
In this role, no day will be the same.
You'll troubleshoot, repair, and maintain equipment while delivering top-notch service to our customers.
You’ll be able to work alongside some of the best technicians in the industry utilizing the latest technology tools and equipment Responsibilities & Expectations: As a Field Service Technician in our PowerServe division, you will perform testing and maintenance on low, medium and high voltage power distribution equipment for our commercial and industrial clients.
We are NETA accredited and perform testing under NETA standards to ensure reliability, safety and efficiency.
Testing and Calibrations: •Instrument Transformer •Power Transformer testing – Doble, Insulation Resistance, Transformer Turns Ratio (TTR) •Cable testing including Power Factor, Tan Delta, VLF, Hipot •Circuit breaker & Switchgear testing of low, medium & high voltage •Primary & Secondary Injection Testing •Protective Relay testing including electro-mechanical and solid state •Continuity, Ground Fault •Power Quality Troubleshooting, inspecting, start-ups and collect data on: switchgear, circuit breakers, cables, transformers, protective relays, VFDs, ATS Service & Repair: Inspections, diagnosis of issues, replace parts, make recommendations, recommissioning Safety: adhere to all safety protocols including LOTO Teamwork: contributes to a strong team environment through assisting teammates in accomplishing mutual goals Customer Service: communicate all information to customers in a way they understand the issues & resolutions Documentation: complete reports on the work you have completed Don’t have all these skills yet…no worries as we have a successful training program to get you the training and certifications you need.
However, you will need the below qualifications and competencies.
Qualifications and Competencies: Associate degree from an accredited 2-year technical college in Electrical Power, or similar experience/training from the military (Army Prime Power, Air Force Electrical Power Production, or NAVY Seabee) preferred Must have some testing experience of low and medium voltage switchgear, circuit breakers, transformers and/or protective relays.
NETA Certification (II, III) highly preferred or equivalent skills/experience to become NETA Certified Power DB experience a plus Requires 3+ years of driving experience along with a valid driver’s license and acceptable driving record Good communication and customer service skills Ability to read and interpret schematics, operating manuals and safety guidelines Ability to work flexible hours, overtime and weekends as required, willingness to be on call Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
Job Opening - Assembler @ Oldsmar, FL
Salary not disclosed
Job Role : Assembler Duration : 12 Months Location : Oldsmar, FL Pay Rate: $20.00
- $25.00 Hourly OT40 Work Schedule: 4/10-1st Shift Job Description: We are seeking a highly skilled Solder assembler to join our team, specializing in advanced rework on circuit card assemblies and knowledge of mechanical assembly related to circuit cards.
The ideal candidate will have a strong background in soldering and rework techniques, with the ability to work on complex electronic assemblies.
If you have a keen eye for detail, excellent hand-eye coordination, and a passion for precision electronics work, we encourage you to apply.
Key Responsibilities: Perform advanced rework on circuit card assemblies, including but not limited to: BGA (Ball Grid Array) reballing and replacement QFN (Quad Flat No-Lead) and other leadless package rework High-density connector rework and repair Complex SMT (Surface Mount Technology) component replacement Through-hole and surface mount technology (SMT) components Fine pitch and high-density components Utilize various soldering techniques, including hand soldering and reflow soldering Uses microscope to verify correct part placement and orientation Inspect and troubleshoot assemblies to identify defects and areas for improvement Develop and implement rework procedures for new and existing products Collaborate with engineering teams to resolve design and manufacturing issues Perform mechanical assembly operations, including: Installing stand-offs, spacers, and other hardware Assembling and aligning complex mechanical components Using adhesives, epoxies, and other bonding agents Maintain a clean and organized workspace, adhering to safety and quality standards Requirements: 5 years of experience in soldering and rework, with a focus on advanced techniques Strong understanding of electronics assembly and repair principles Proficiency with soldering equipment, including but not limited to: Soldering irons and stations Reflow ovens and soldering machines Experience with inspection and testing equipment, such as microscopes and X-ray machines Excellent hand-eye coordination, fine motor skills, and attention to detail Ability to work in a fast-paced environment, meeting production deadlines and quality Soldering, Surface Mount Technology, IPC-A- 610, Basic computer skills, Blueprint Reading, IPC-J-STD
- $25.00 Hourly OT40 Work Schedule: 4/10-1st Shift Job Description: We are seeking a highly skilled Solder assembler to join our team, specializing in advanced rework on circuit card assemblies and knowledge of mechanical assembly related to circuit cards.
The ideal candidate will have a strong background in soldering and rework techniques, with the ability to work on complex electronic assemblies.
If you have a keen eye for detail, excellent hand-eye coordination, and a passion for precision electronics work, we encourage you to apply.
Key Responsibilities: Perform advanced rework on circuit card assemblies, including but not limited to: BGA (Ball Grid Array) reballing and replacement QFN (Quad Flat No-Lead) and other leadless package rework High-density connector rework and repair Complex SMT (Surface Mount Technology) component replacement Through-hole and surface mount technology (SMT) components Fine pitch and high-density components Utilize various soldering techniques, including hand soldering and reflow soldering Uses microscope to verify correct part placement and orientation Inspect and troubleshoot assemblies to identify defects and areas for improvement Develop and implement rework procedures for new and existing products Collaborate with engineering teams to resolve design and manufacturing issues Perform mechanical assembly operations, including: Installing stand-offs, spacers, and other hardware Assembling and aligning complex mechanical components Using adhesives, epoxies, and other bonding agents Maintain a clean and organized workspace, adhering to safety and quality standards Requirements: 5 years of experience in soldering and rework, with a focus on advanced techniques Strong understanding of electronics assembly and repair principles Proficiency with soldering equipment, including but not limited to: Soldering irons and stations Reflow ovens and soldering machines Experience with inspection and testing equipment, such as microscopes and X-ray machines Excellent hand-eye coordination, fine motor skills, and attention to detail Ability to work in a fast-paced environment, meeting production deadlines and quality Soldering, Surface Mount Technology, IPC-A- 610, Basic computer skills, Blueprint Reading, IPC-J-STD
Not Specified
M
Maintenance Technician III
Salary not disclosed
Hourly Rate: $39.48 $1000 SIGN ON BONUS This bonus is for new hires.
Internal candidates, college programs, rehires and managers are excluded.
Payments are in $500 increments at 90 and 180 days, paid on the following paycheck.
JOB REQUIREMENT: HVAC & EPA Certification is required Are you looking for a place where meaningful moments are made together? At Marriott Vacations Worldwide (MVW), we make vacation dreams come true for travelers around the world in a supportive, friendly, and beautiful work environment.
As a Maintenance TechnicianIII at MVW, you will assist in providing our Owners/guests with experiences and events to make memorable vacation memories, where meaningful moments are made together.
Where great benefits lead to a life fulfilled.
Competitive Pay Medical/Dental/Vision/401K opportunities Travel discounts Credit Union Membership Tuition Reimbursement Professional Counseling & Family Support Growth and Development Opportunities
*Benefit Eligibility will vary by position Site Specific Perks AAA Four Diamond Resort Free daily associate meal Complimentary soft drinks, coffee and tea Monthly & quarterly celebrations and awards Company branded attire for outdoor associates Complimentary work shoes Discounted bus pass Discounts to onsite spa and food outlets Community service opportunities Sustainability awards – Audubon Green Lodging As a Maintenance TechnicianIII, a typical day will include: Responds and attends to guest repair requests.
Performs preventive maintenance tasks as assigned.
Communicates with guests/Owners to resolve maintenance issues.
Displays above-average engineering operations skills and strong general mechanical ability.
Performs general engineering-related inventory duties.
Performs advanced troubleshooting of building systems.
Reads, logs, tracks, and interprets readings from meters, gauges, and other measuring devices.
Participate in regular training for safety, technical knowledge, and career development as applicable.
Guest Experience and Company Standards Welcome and greet guests and anticipate and address their needs.
Interact with colleagues and guests professionally and promptly.
Contribute to team goals.
Always follow company policies and safety procedures.
To Become a Maintenance TechnicianIII at MVW: Valid driver's license may be required with at least one year of clean driving history.
Operate company vehicles following our company policies and standards (including but not limited to golf carts).
Troubleshoot HVAC equipment, HVAC control circuits, commercial kitchen equipment (refrigeration), line voltage circuits, control circuits, hot water heaters/boilers, AV equipment, air compressor operation, energy management systems, and advanced icemaker and appliance repair.
Install and repair flooring, tile, and wall surfaces.
Available to work various shifts, holidays, and both weekend days.
Reach overhead and below the knees, perform bending, twisting, pulling, and stooping, and be able to stand, sit, or walk for an extended period of time.
Lift/Carry/Push/Pull Items that Weigh up to 50lbs without assistance.
Position may require background and drug screening contingent on company policy in accordance with applicable legal requirements.
Marriott Vacations Worldwide is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.
Internal candidates, college programs, rehires and managers are excluded.
Payments are in $500 increments at 90 and 180 days, paid on the following paycheck.
JOB REQUIREMENT: HVAC & EPA Certification is required Are you looking for a place where meaningful moments are made together? At Marriott Vacations Worldwide (MVW), we make vacation dreams come true for travelers around the world in a supportive, friendly, and beautiful work environment.
As a Maintenance TechnicianIII at MVW, you will assist in providing our Owners/guests with experiences and events to make memorable vacation memories, where meaningful moments are made together.
Where great benefits lead to a life fulfilled.
Competitive Pay Medical/Dental/Vision/401K opportunities Travel discounts Credit Union Membership Tuition Reimbursement Professional Counseling & Family Support Growth and Development Opportunities
*Benefit Eligibility will vary by position Site Specific Perks AAA Four Diamond Resort Free daily associate meal Complimentary soft drinks, coffee and tea Monthly & quarterly celebrations and awards Company branded attire for outdoor associates Complimentary work shoes Discounted bus pass Discounts to onsite spa and food outlets Community service opportunities Sustainability awards – Audubon Green Lodging As a Maintenance TechnicianIII, a typical day will include: Responds and attends to guest repair requests.
Performs preventive maintenance tasks as assigned.
Communicates with guests/Owners to resolve maintenance issues.
Displays above-average engineering operations skills and strong general mechanical ability.
Performs general engineering-related inventory duties.
Performs advanced troubleshooting of building systems.
Reads, logs, tracks, and interprets readings from meters, gauges, and other measuring devices.
Participate in regular training for safety, technical knowledge, and career development as applicable.
Guest Experience and Company Standards Welcome and greet guests and anticipate and address their needs.
Interact with colleagues and guests professionally and promptly.
Contribute to team goals.
Always follow company policies and safety procedures.
To Become a Maintenance TechnicianIII at MVW: Valid driver's license may be required with at least one year of clean driving history.
Operate company vehicles following our company policies and standards (including but not limited to golf carts).
Troubleshoot HVAC equipment, HVAC control circuits, commercial kitchen equipment (refrigeration), line voltage circuits, control circuits, hot water heaters/boilers, AV equipment, air compressor operation, energy management systems, and advanced icemaker and appliance repair.
Install and repair flooring, tile, and wall surfaces.
Available to work various shifts, holidays, and both weekend days.
Reach overhead and below the knees, perform bending, twisting, pulling, and stooping, and be able to stand, sit, or walk for an extended period of time.
Lift/Carry/Push/Pull Items that Weigh up to 50lbs without assistance.
Position may require background and drug screening contingent on company policy in accordance with applicable legal requirements.
Marriott Vacations Worldwide is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture.
Not Specified
J
Electrical Hardware Engineer IV
🏢 Jobot
Salary not disclosed
Electrical Hardware Engineer IV in CO springs
- competitive salary and benefits
- onsite This Jobot Job is hosted by: Tarek Hamzeh Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $140,000
- $180,000 per year A bit about us: We are looking to hire a talented and hardworking Hardware Engineer to develop, design, and support our handheld network testing products.
You will be responsible for designing embedded hardware sub-systems, specifying hardware components, system troubleshooting, collaborating with software engineers, and modifying existing hardware platforms to enhance functionality, and designing alternatives for any hard to source or end of life components in existing products.
You will perform a variety of electrical engineering design assignments working on multiple NetAlly products at a time.
Design responsibility includes but is not limited to schematic entry, PCB layout oversight for embedded ARM CPU and measurement subsystems.
Responsibility also includes FPGA VHDL design and support for high-speed packet processing, design of power supply and battery charging circuits, and high-speed interface design of IEEE 802.3/802.11 networking interfaces.
Why join us? Join a purpose-driven technology company that builds mission-critical tools used by professionals worldwide.
The organization combines a strong engineering culture with a practical, customer-first mindset, offering the opportunity to work on impactful products while growing alongside a collaborative, innovation-focused team.
Job Details ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Designing and developing hardware systems that include circuit boards, processors, memory subsystems, LCDs, touch screens, and high-speed network interfaces using Cadence Allegro tools.
Designing and developing analog circuits for rechargeable batteries, low voltage power supplies, USB power delivery, and hardware systems for measuring resistance and power-over-ethernet parameters.
Creating hardware design specifications and documents for new products.
Collaborating with software developers during board bring-up.
Working with PCB layout resources for placement and routing of signals to meet signal integrity requirements.
Interacting with PCB layout and manufacturing for PCB/A fabrication and testing.
Supporting currently shipping products when component or product issues arise and implementing design changes as needed.
Specifying new parts, vendors, and schematic part symbols as needed for new designs Interfacing to our PLM system for specification and control of component parts and bill of materials Working with component vendors for selection and preparation of detailed specifications for new components Working with software, mechanical, manufacturing, and test engineers to design and release products into manufacturing.
Understanding and implementing thermal management solutions based on early thermal modeling, bench testing, and chamber testing to find cost effective thermal solutions as needed.
Working to extend battery life by early estimating and application of power reduction techniques.
Support EMI/ESD compliance pre-scans and testing and then using mitigating design techniques to ensure designs meet compliance criteria that are needed to ship world-wide.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed above are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
KNOWLEDGE AND SKILLS Experience with PCB/A design for high-speed networking interfaces and embedded CPU subsystems.
Experience with Cadence Allegro schematic capture and PCB layout tools.
Experience in design of embedded CPU sub-systems.
Knowledge of high-speed communication bus design and layout techniques such as USB, PCIe, XFI.
Familiarity with DDR2/DDR3 memory design, and I2C and SPI busses.
Knowledge of various hardware debugging equipment, oscilloscopes, logic analyzers, and spectrum analyzers.
Experience with EMI and ESD compliance testing and design mitigation strategies.
PREFERRED KNOWLEDGE AND SKILLS Experience with Altera and/or Xilinx VHDL and FPGA design.
EDUCATION and/or EXPERIENCE BS or higher in Electrical or Computer Engineering, or related experience.
Minimum 10 years of experience.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- competitive salary and benefits
- onsite This Jobot Job is hosted by: Tarek Hamzeh Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $140,000
- $180,000 per year A bit about us: We are looking to hire a talented and hardworking Hardware Engineer to develop, design, and support our handheld network testing products.
You will be responsible for designing embedded hardware sub-systems, specifying hardware components, system troubleshooting, collaborating with software engineers, and modifying existing hardware platforms to enhance functionality, and designing alternatives for any hard to source or end of life components in existing products.
You will perform a variety of electrical engineering design assignments working on multiple NetAlly products at a time.
Design responsibility includes but is not limited to schematic entry, PCB layout oversight for embedded ARM CPU and measurement subsystems.
Responsibility also includes FPGA VHDL design and support for high-speed packet processing, design of power supply and battery charging circuits, and high-speed interface design of IEEE 802.3/802.11 networking interfaces.
Why join us? Join a purpose-driven technology company that builds mission-critical tools used by professionals worldwide.
The organization combines a strong engineering culture with a practical, customer-first mindset, offering the opportunity to work on impactful products while growing alongside a collaborative, innovation-focused team.
Job Details ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Designing and developing hardware systems that include circuit boards, processors, memory subsystems, LCDs, touch screens, and high-speed network interfaces using Cadence Allegro tools.
Designing and developing analog circuits for rechargeable batteries, low voltage power supplies, USB power delivery, and hardware systems for measuring resistance and power-over-ethernet parameters.
Creating hardware design specifications and documents for new products.
Collaborating with software developers during board bring-up.
Working with PCB layout resources for placement and routing of signals to meet signal integrity requirements.
Interacting with PCB layout and manufacturing for PCB/A fabrication and testing.
Supporting currently shipping products when component or product issues arise and implementing design changes as needed.
Specifying new parts, vendors, and schematic part symbols as needed for new designs Interfacing to our PLM system for specification and control of component parts and bill of materials Working with component vendors for selection and preparation of detailed specifications for new components Working with software, mechanical, manufacturing, and test engineers to design and release products into manufacturing.
Understanding and implementing thermal management solutions based on early thermal modeling, bench testing, and chamber testing to find cost effective thermal solutions as needed.
Working to extend battery life by early estimating and application of power reduction techniques.
Support EMI/ESD compliance pre-scans and testing and then using mitigating design techniques to ensure designs meet compliance criteria that are needed to ship world-wide.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed above are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
KNOWLEDGE AND SKILLS Experience with PCB/A design for high-speed networking interfaces and embedded CPU subsystems.
Experience with Cadence Allegro schematic capture and PCB layout tools.
Experience in design of embedded CPU sub-systems.
Knowledge of high-speed communication bus design and layout techniques such as USB, PCIe, XFI.
Familiarity with DDR2/DDR3 memory design, and I2C and SPI busses.
Knowledge of various hardware debugging equipment, oscilloscopes, logic analyzers, and spectrum analyzers.
Experience with EMI and ESD compliance testing and design mitigation strategies.
PREFERRED KNOWLEDGE AND SKILLS Experience with Altera and/or Xilinx VHDL and FPGA design.
EDUCATION and/or EXPERIENCE BS or higher in Electrical or Computer Engineering, or related experience.
Minimum 10 years of experience.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Application Engineer - Hydraulic Systems
🏢 Jobot
Salary not disclosed
Remote Applications Engineer role supporting hydraulic system design and customer growth across the South region with 40–50% travel, strong base salary, and bonus potential.
This Jobot Job is hosted by: Dan Asher Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $110,000
- $130,000 per year A bit about us: Founded decades ago and operating globally, we are a manufacturer of advanced fluid power systems serving mobile and industrial equipment markets.
Our teams support customers with engineered hydraulic solutions including manifolds, cartridge valves, filtration, and motion control technologies.
We emphasize technical depth, collaboration between sales and engineering, and long-term customer partnerships built on practical system expertise.
Why join us? • Senior-level hydraulic applications role with direct customer impact and authority to design real-world fluid power systems • High-visibility position supporting sales strategy and regional growth across a major U.S.
territory • Competitive base salary ($110K–$125K) plus bonus potential with a global manufacturer of advanced fluid power systems • Remote flexibility within the South region with balanced weekday travel expectations • Opportunity to influence hydraulic manifold and cartridge valve growth initiatives, including expansion efforts tied to the Houston facility Job Details Applications Engineer
- Hydraulic Systems Location: Remote within the South region (TX-FL-NC-VA) near a major airport | 40–50% weekday travel $110k-$125k + Annual bonus and full benefits This position serves as the technical hydraulic authority for the South region (TX–FL–NC–VA), partnering closely with the sales team to develop and apply engineered fluid power solutions.
The engineer will work directly with customers to design hydraulic circuits, specify components, and support implementation of manifold and valve-based systems.
This role blends customer-facing business development support with hands-on hydraulic system design.
What You Will Be Responsible For Serve as the hydraulic system design resource for assigned customers and applications Travel with sales representatives to support customer visits, design discussions, and solution development Design hydraulic circuits including valve selection, manifold layouts, filtration, and motion control components Translate customer functional requirements into practical hydraulic system solutions Review and interpret technical specifications and apply them to product and system configurations Participate in design reviews with engineering, manufacturing, and sales teams Respond to application inquiries from customers, sales, product engineering, and operations Support customers in implementation and troubleshooting of hydraulic systems Identify opportunities to expand hydraulic product sales within existing accounts Provide Voice of Customer feedback to product divisions for new product development Train and educate sales teams on hydraulic products and solution-selling strategies What You Bring to the Table Strong hydraulic circuit design experience (mechanical fluid flow systems, not electrical) Ability to design functional systems using valves, manifolds, filtration, and related hydraulic components Experience supporting customer applications in mobile or industrial equipment markets Comfortable in customer-facing environments with sales collaboration Ability to travel 40–50% within the region (weekday travel) Strong understanding of engineering fundamentals and system integration principles Self-directed, organized, and able to manage multiple customer projects Minimum Qualifications Associate degree in engineering required; Bachelor’s degree in Mechanical Engineering or related field preferred Experience designing and/or applying hydraulic products in mobile or industrial markets Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
This Jobot Job is hosted by: Dan Asher Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $110,000
- $130,000 per year A bit about us: Founded decades ago and operating globally, we are a manufacturer of advanced fluid power systems serving mobile and industrial equipment markets.
Our teams support customers with engineered hydraulic solutions including manifolds, cartridge valves, filtration, and motion control technologies.
We emphasize technical depth, collaboration between sales and engineering, and long-term customer partnerships built on practical system expertise.
Why join us? • Senior-level hydraulic applications role with direct customer impact and authority to design real-world fluid power systems • High-visibility position supporting sales strategy and regional growth across a major U.S.
territory • Competitive base salary ($110K–$125K) plus bonus potential with a global manufacturer of advanced fluid power systems • Remote flexibility within the South region with balanced weekday travel expectations • Opportunity to influence hydraulic manifold and cartridge valve growth initiatives, including expansion efforts tied to the Houston facility Job Details Applications Engineer
- Hydraulic Systems Location: Remote within the South region (TX-FL-NC-VA) near a major airport | 40–50% weekday travel $110k-$125k + Annual bonus and full benefits This position serves as the technical hydraulic authority for the South region (TX–FL–NC–VA), partnering closely with the sales team to develop and apply engineered fluid power solutions.
The engineer will work directly with customers to design hydraulic circuits, specify components, and support implementation of manifold and valve-based systems.
This role blends customer-facing business development support with hands-on hydraulic system design.
What You Will Be Responsible For Serve as the hydraulic system design resource for assigned customers and applications Travel with sales representatives to support customer visits, design discussions, and solution development Design hydraulic circuits including valve selection, manifold layouts, filtration, and motion control components Translate customer functional requirements into practical hydraulic system solutions Review and interpret technical specifications and apply them to product and system configurations Participate in design reviews with engineering, manufacturing, and sales teams Respond to application inquiries from customers, sales, product engineering, and operations Support customers in implementation and troubleshooting of hydraulic systems Identify opportunities to expand hydraulic product sales within existing accounts Provide Voice of Customer feedback to product divisions for new product development Train and educate sales teams on hydraulic products and solution-selling strategies What You Bring to the Table Strong hydraulic circuit design experience (mechanical fluid flow systems, not electrical) Ability to design functional systems using valves, manifolds, filtration, and related hydraulic components Experience supporting customer applications in mobile or industrial equipment markets Comfortable in customer-facing environments with sales collaboration Ability to travel 40–50% within the region (weekday travel) Strong understanding of engineering fundamentals and system integration principles Self-directed, organized, and able to manage multiple customer projects Minimum Qualifications Associate degree in engineering required; Bachelor’s degree in Mechanical Engineering or related field preferred Experience designing and/or applying hydraulic products in mobile or industrial markets Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Senior Test Engineer
🏢 Jobot
Salary not disclosed
Leading Aerospace Manufacturer | Senior Test Engineer Opportunity! This Jobot Job is hosted by: David DeCristofaro Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $135,000 per year A bit about us: We are a long-standing, innovative manufacturer of high-reliability electronic solutions used in mission-critical industries.
Our culture is built around technical excellence, collaboration, and hands-on problem solving.
Engineers here have real ownership—working closely with customers, operations, and leadership to deliver complex products that truly matter.
With a supportive team environment, meaningful autonomy, and clear paths for growth, we offer the stability of an established organization combined with the energy and impact of a close-knit engineering culture.
Why join us? Competitive Base plus Bonus Compensation Structure! Lucrative Employee Stock Purchase Plan! Matching 401k Plan! Exciting and Unique Projects and Products! Significant Autonomy! Clear Path for Advancement! Relocation Assistance! Job Details We are seeking a highly skilled Senior Test Engineer to join our Tulsa-based electronics manufacturing facility.
This role is critical to ensuring the quality, reliability, and performance of complex printed circuit boards (PCBs) used in advanced aerospace and defense applications.
As a Senior Test Engineer, you will serve as the technical expert for test development and execution, working hands-on with functional, environmental, ICT, and flying probe testing systems.
You’ll collaborate closely with customers, manufacturing teams, and engineering leadership to design and implement test solutions that meet rigorous performance and compliance standards.
What You’ll Do Develop and implement In-Circuit Test (ICT) and Flying Probe test solutions Create test templates, programs, and methodologies for new and existing products Define measurements and tolerances based on customer requirements Interface directly with customers to understand product specifications and test expectations Support environmental testing, including thermal chambers and vibration tables Troubleshoot complex PCB assemblies and test failures Collaborate cross-functionally with manufacturing, quality, and design engineering Mentor and provide technical leadership to technicians and junior engineers Continuously improve test processes, efficiency, and reliability Qualifications 5+ years of experience in electronics test engineering or related field Hands-on expertise with complex PCB testing and validation Must have experience with In-Circuit Test (ICT) and Flying Probe test development Knowledge of Functional test development and Environmental test development Experience working directly with customers on technical requirements Experience in aerospace, defense, or military electronics RF or high-complexity multi-layer PCB experience
*This is an ITAR-compliant position
- Must be a U.S.
Citizen or Green Card holder Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $135,000 per year A bit about us: We are a long-standing, innovative manufacturer of high-reliability electronic solutions used in mission-critical industries.
Our culture is built around technical excellence, collaboration, and hands-on problem solving.
Engineers here have real ownership—working closely with customers, operations, and leadership to deliver complex products that truly matter.
With a supportive team environment, meaningful autonomy, and clear paths for growth, we offer the stability of an established organization combined with the energy and impact of a close-knit engineering culture.
Why join us? Competitive Base plus Bonus Compensation Structure! Lucrative Employee Stock Purchase Plan! Matching 401k Plan! Exciting and Unique Projects and Products! Significant Autonomy! Clear Path for Advancement! Relocation Assistance! Job Details We are seeking a highly skilled Senior Test Engineer to join our Tulsa-based electronics manufacturing facility.
This role is critical to ensuring the quality, reliability, and performance of complex printed circuit boards (PCBs) used in advanced aerospace and defense applications.
As a Senior Test Engineer, you will serve as the technical expert for test development and execution, working hands-on with functional, environmental, ICT, and flying probe testing systems.
You’ll collaborate closely with customers, manufacturing teams, and engineering leadership to design and implement test solutions that meet rigorous performance and compliance standards.
What You’ll Do Develop and implement In-Circuit Test (ICT) and Flying Probe test solutions Create test templates, programs, and methodologies for new and existing products Define measurements and tolerances based on customer requirements Interface directly with customers to understand product specifications and test expectations Support environmental testing, including thermal chambers and vibration tables Troubleshoot complex PCB assemblies and test failures Collaborate cross-functionally with manufacturing, quality, and design engineering Mentor and provide technical leadership to technicians and junior engineers Continuously improve test processes, efficiency, and reliability Qualifications 5+ years of experience in electronics test engineering or related field Hands-on expertise with complex PCB testing and validation Must have experience with In-Circuit Test (ICT) and Flying Probe test development Knowledge of Functional test development and Environmental test development Experience working directly with customers on technical requirements Experience in aerospace, defense, or military electronics RF or high-complexity multi-layer PCB experience
*This is an ITAR-compliant position
- Must be a U.S.
Citizen or Green Card holder Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
jobs by
✓ All jobs loaded