Mini Circuits Address Jobs in Usa

Immigration Litigation

SALARY RANGE $140,000 TO $200,000 PER ANNUM

Musa-Obregon Law P.C. | Queens, NY & White Plains, NY

Musa-Obregon Law P.C. is a full-service New York law firm with a long track record of representing clients across a wide range of legal matters. The firm brings decades of combined litigation experience to immigration defense, personal injury claims, civil rights enforcement, and employment discrimination cases throughout the New York metropolitan area.

Our attorneys advocate for individuals and families in high-stakes immigration proceedings — including removal defense, asylum, residency, naturalization, federal appeals, and habeas corpus petitions — as well as in state and federal civil rights and employment matters. We handle claims involving discrimination, wrongful conduct, and workplace violations, and we pursue fair compensation for clients injured by negligence or abuse.

At Musa-Obregon Law P.C., we are committed to vigorous courtroom advocacy, personalized client service, and professional development within our team. Our firm is known for serious litigation experience that spans administrative, trial, and appellate practice, and for representing a diverse client base with respect and dedication

This position is ideal for a lawyer who thrives in complex constitutional litigation, detention challenges, emergency motions, and high-stakes removal defense at the federal level.

Position Overview

The successful candidate will handle advanced immigration litigation, including but not limited to:

• Federal habeas corpus petitions challenging unlawful immigration detention under INA §§ 1225, 1226, and 1231
• Emergency motions for stays of removal and temporary restraining orders in federal district courts
• Appeals before the Board of Immigration Appeals (BIA)
• Petitions for Review and emergency stay litigation before the Second Circuit Court of Appeals
• Litigation involving due process violations, bond jurisdiction, prolonged detention, UAC issues, misclassification of detention authority, and extradition-removal crossover issues

This role involves substantial writing, strategic litigation planning, and court appearances, often on an expedited basis.

Required Qualifications

• J.D. from an accredited law school
• Active New York Bar admission (Second Circuit admission strongly preferred)
• Minimum 5+ years of immigration litigation experience, with substantial exposure to:
• Federal habeas corpus practice
• BIA appellate briefing
• Federal district court litigation
• Circuit-court appellate practice
• Demonstrated experience drafting:
• Habeas petitions
• Emergency motions and TROs
• Appellate briefs and stays
• Complex legal memoranda with heavy case citation
• Deep knowledge of immigration detention statutes, constitutional due process principles, and federal jurisdiction
• Exceptional legal research and writing skills
• Ability to manage multiple high-priority matters under tight deadlines

Preferred Experience (Highly Valued)

• Prior litigation in SDNY, EDNY, or Second Circuit
• Experience with:
• Bond-related habeas litigation
• Trump-era detention policies
• UAC custody challenges
• VAWA, asylum, and CAT-related federal litigation
• Familiarity with PACER/ECF, emergency filings, and federal court practice rules
• Spanish or other language proficiency (not required, but a plus)

Responsibilities

• Draft and litigate federal habeas corpus petitions and related motions
• Prepare BIA briefs and motions to reopen/reconsider
• Handle federal appellate filings, including emergency stays
• Appear in federal district court and appellate proceedings as needed
• Collaborate with trial-level immigration attorneys and support staff
• Mentor junior attorneys on federal litigation strategy
• Maintain meticulous legal research and case tracking

Compensation & Benefits

• Highly competitive salary, commensurate with experience strong courtroom exposure, federal litigation opportunities, and long-term growth."
• Performance-based bonuses
• Hybrid or flexible schedule available for the right candidate
• Strong litigation support infrastructure
• Opportunity for long-term growth and leadership within the firm

Locations

• Queens, New York
• White Plains, New York
• (Ability to work from either or both offices)

How t Apply

Interested candidates should submit:

• Resume
• Cover letter detailing federal immigration litigation experience
• Writing sample (preferably a habeas petition, appellate brief, or federal motion)

Applications will be reviewed on a rolling basis.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Effector Analog and Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

What You Will Do

• Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications.
• Architect at the power system level.
• See circuit card and stack development through its design phases, from requirements definition through initial integration testing. Includes leading large teams and defining schedules and system level tasking for designs.
• Guide ECAD drafters and junior engineers through layout and routing activities. Define layer stackup definitions. Act as an expert regarding creepage and clearance.
• Lead large teams to success with schedule, budget, and technical execution.
• Engage in personal technical growth and facilitate technical growth in peers and junior engineers. Drive the capture of opportunities needed to mature the organization on the technical front.

Qualifications You Must Have

• Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and 10 years of prior relevant experience
• Design, analysis, test, and/or simulation experience with linear converters, and familiarity with all the following non-isolated converter topologies: buck, boost, buck-boost.
• Professional design, analysis, and simulation experience with at least one of the following isolated converter topologies: flyback, half-bridge, full-bridge, forward, push-pull, resonant.
• Experience with EMI Filter design, transformer or inductor design, analysis, test, and/or simulation considerations in power electronics circuits.
• Analog electronics design, including the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.

Qualifications We Prefer

• Advanced degree in Electrical Engineering
• Understanding of switching converter control techniques and modes such as voltage mode, peak and average current modes, their advantages and disadvantages. Conceptual familiarity and experience must include stability.
• Experience leading large teams (formally or informally), and experience working with other team leads toward a larger goal.
• Exposure to managing customer relationships.
• Experience communicating and documenting technical topics at the small and large team level and experience presenting to upper levels of management.
• Experience conducting trade studies relating to power electronics architecture at the circuit card stack level.
• Experience guiding drafters through the ECAD process, including the layout and routing concerns specific to non-isolated and isolated power electronics.
• Experience Utilizing and creating electrical design specifications. Should have exposure to requirements definition early in the design cycle.
• Experience designing at the power system level to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
• Experience with Texas Instruments C-2000 family of microcontrollers, Microchip PIC controllers, VHDL, or real time operating systems.
• Experience with using CAN-bus, UART, and/or RS-422.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Work Schedule: 9/80 schedule (every other Friday off)
• Relocation Eligibility: This position is eligible for relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: , AZ: ,-az-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience.

As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta's Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment.

Summary of responsibilities:

• Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments.
• Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments.
• Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures.
• Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt.
• Prepares maintenance reports by collecting, analyzing, and summarizing information and trends.

Qualified candidates must also possess at least one of the following:

• Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems.
• PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems.
• Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery.
• Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems.
• 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment.

Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact

Internal Movement Eligibility

• Consistently prioritizes safety and security of self, others, and personal data.
• Embrace diverse people, thinking, and styles.
• Possesses a high school diploma, GED, or high school equivalency.
• Is at least 18 years of age and has authorization to work in the United States.
• Must have a valid driver's license.
• Must be proficient in English.
• Ability to lift items weighing between 50 and 70 pounds.
• Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays.
• Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability.
• Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks.

• A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas.
• Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics.
• Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors.
• Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations.

• Competitive salary, industry-leading profit sharing program, and performance incentives.
• 401(k) with generous company contributions up to 9%.
• New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 – March 31).
• In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period.
• LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program.
• 10 paid holidays per calendar year.
• Birthing parents are eligible for 12-weeks of paid maternity/parental leave.
• Non-birthing parents are eligible for 2-weeks of paid parental leave.
• Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits.
• Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages.
• Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health.
• Domestic and International space-available flight privileges for employees and eligible family members.
• Career development programs to achieve your long-term career goals.
• World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint.
• Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies.
• Recognition rewards and awards through the platform Unstoppable Together.
• Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

PCBA Design Engineer

Design Custom Electronics That Power Real-World Products

Are you an electrical engineer who enjoys seeing your designs move from concept to real production hardware? This is an opportunity to join an engineering team where your ideas and technical expertise shape the products being built.

In this role, you will design custom printed circuit board assemblies used in industrial and embedded systems. Every project is unique! Meaning you won’t be stuck supporting the same product for years. Instead, you’ll work on a wide variety of applications while collaborating with other engineers and customers to develop PCB electronic solutions.

If you enjoy solving problems, working hands-on with custom boards, and taking designs from prototype through production, this role may be for you!

Why This Role?

• Work on diverse, custom projects with no repetitive product cycles
• See your designs come to life from prototype through full production
• Small engineering team where your impact is significant
• Strong mentorship and collaboration with experienced engineers
• Opportunities for advancement into senior engineering and leadership roles
• Flexible work hours and a supportive, engineering-driven culture
• Stable and growing company with long-term demand for its products

What You’ll Do:

• Design schematics and printed circuit board assemblies (PCBA) for industrial and embedded applications
• Select electronic components based on performance, lifecycle, availability, and cost
• Review and support PCB layout with attention to signal integrity, power distribution, and thermal considerations
• Collaborate with firmware and mechanical engineers to ensure successful system integration
• Support design for manufacturability, assembly, and testing (DFM / DFA / DFT)
• Create and maintain design documentation including schematics, BOMs, and test procedures
• Assist with prototype builds, bring-up, debugging, and validation testing
• Support ongoing product improvements and design updates

Qualifications:

• Bachelor’s degree in Electrical Engineering or significant PCB design experience
• 3+ years of experience designing printed circuit boards (PCB)
• Schematic design experience using Altium software is preferred
• Basic understanding of analog and digital circuit design
• Familiarity with microcontrollers, sensors, and communication interfaces
• Ability to interpret datasheets, schematics, and manufacturing documentation

Compensation & Benefits:

• Base salary: $90,000 – $115,000
• Annual performance cash bonus
• Comprehensive benefit package including all insurance and retirement
• Continuing education allowance
• Flexible work schedule options
• Team events and company gatherings
• A collaborative engineering culture where you will be supported

Apply Today!

This role offers clear paths for career advancement, including opportunities to grow into a Senior Engineer, Project Manager, and Engineering Manager.

If you have PCB Design experience, we encourage you to apply today!

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Industrial Maintenance Controls Technician

Location: Pleasant Prairie, WI

Compensation: $36 - $39 hour

Shift: Monday – Friday ~ days

Pension plan!!

As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.

Qualifications and Experience Requirements

• Associates degree or higher required
• PLC experience is required
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Industrial Maintenance Controls Technician Job Description

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
• Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
• Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
• Access and use PLC logic programming to troubleshoot production equipment.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Electro-Mechanical Assembly Technician

San Diego, CA (Onsite)

Direct Hire

This position pays between $65K - $75 K Per Year

JOB DESCRIPTION

• Physically build deliverable sensor systems: assemble mechanical components, solder electronic components, apply coatings to printed circuit boards, install printed circuit boards into sensor housings, precisely cut and strip wiring, mount fasteners, fasten and/or seal electro-mechanical assemblies by applying various bonding and/or sealing agents
• Perform final machining, cutting, or bonding operations on components such as sensor housing, sense elements, fine wires, etc.
• Assemble wiring harnesses and terminate connectors
• Assemble circuit boards, connectors, ribbon cables, jumpers, and other electronic components into custom-built enclosures
• Test sensors and printed circuit boards using a combination of electrical test equipment and LabVIEW-based software scripts
• Participate actively in inventory management and quarterly inventory checks
• Conduct final assembly of sensor systems onto customer driveshafts, including application of sealant, ensuring integrity of the full assembly, and certifying system fitness for homologation
• Participate in failure analyses by dissecting and analyzing hardware returned from the field, conducting diagnostic and validation testing, and comparing with original results.
• Assist in writing and issuing detailed reports outlining findings

Skill Requirements

• At least 2 years of full-time work experience in a related role
• Attention to detail and good craftsmanship, and a strong concern for quality
• Strong electrical and mechanical assembly skills
• Familiarity with wiring harness assembly protocols using AWG 20-gauge harnesses or smaller
• Familiarity with processing adhesives, soldering, and general machine shop skills
• Proficiency with LabVIEW or equivalent software
• Ability to read and interpret mechanical drawings and electrical schematics
• Understanding and knowledge of sensor or instrumentation calibration protocols
• the candidate is expected to already have a hands-on approach and a certain comfort level building and operating devices and instrumentation.
• Educational Requirements An Associate’s degree in fields such as machining, mechanical technology, electronics, automotive technology, or electronics is preferred but not required.

Applicants should apply via The Mice Groups Inc. website ( ) or through this careers site posting.

We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates.

Privacy Policy

One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you’ve requested.

The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information.

The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website.

The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to

The Electrical Instrument Technician maintains, constructs and repairs electrical distribution, lighting, computer and PLC systems within the plant, as well as assembles, installs, tests and maintains electrical or electronic wiring, equipment, appliances, apparatus and fixtures. They will also diagnose malfunctioning systems using test equipment and hand tools to locate the cause of a breakdown and correct the problem.

This position is for night shift Wednesday thru Saturday. 4pm-4am

At CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees.  Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from.  All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans.  Other benefits include life insurance, disability coverage, employee assistance program, and retirement program.  The company also has a variety of voluntary benefits for employees to choose from.

$39.38 to $40.30 + shift differential

• Calibrates, designs, reconfigures, assembles, installs, inspects and maintains electrical systems and equipment, such as motors, generators, commutators, speed reducers, switchboards, circuit boards, lighting circuits, SCR, electronic control devices, computers and circuits, etc.; uses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation
• Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M’s, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities
• Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes; climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment
• Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties
• Maintains equipment, work areas, measuring instruments and tools
• Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work; performs cutting and welding; paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc.
• Changes motors and performs alignments
• Maintains process analyzers
• Performs other duties as assigned by manager

High school diploma/GED

• Physical requirements: sit, stand, stoop, bend for extended periods of time (up to 8 hrs.), climb, and lift up to 70 lbs.
• Walk on all types of surfaces (uneven and/or slippery ground)
• Ability to work in surroundings that include dust, vibration, heights and confined spaces
• Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process
• Exposure to cement, clay, limestone and various chemicals. See MSDS for more details
• Able to work rotating and flexible hours
• Able to work effectively both independently and as part of a team
• Good verbal and written communication skills
• Experience with or knowledge of all types of equipment used in the manufacturing of cement preferred

Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. 

#LI-PW1

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.  

The Advanced Effector Guidance Systems (AEGS) Department within Raytheon Hardware Engineering provides Electrical Systems Engineering to develop Electronic Systems solutions for products across the Raytheon portfolio. Our core electrical engineering responsibilities include architecture, requirements, integration, and test. Our core electrical engineering technologies include RF/RADAR, Navigation/IMU/GPS, Data Link/Communication, Digital, and Power. We partner with several Electrical Product Team departments that provide the detailed design of our electrical products as well as systems teams.

The AEGS Department is searching for an Electrical Subsystems Guidance Section (GS) Lead with experience leading a multi-disciplinary system design and integration team. The role of the GS Lead is to lead a cross-functional and cross-discipline team of engineers through the design cycle for development and integration of a guidance section. This role will include Control Account Management (CAM) responsibilities so Earned Value (EV) certification is required.
 

What You Will Do

• Responsible for Technical, Cost, and Schedule Execution.

• Be responsible for the technical integrity of the GS, including the Technical Data Package (TDP) development, validation, and integration

• Manage costs and schedule for GS design, verification, and hardware procurement

• Manage the technical risk for the GS

• Technical oversight of GS failure investigations

• Support component level design and test reviews

• Work environment is primarily in an office, but may include labs, field work, or a combination.

• Assignments may include guiding a team through several phases of hardware systems lifecycle such as designs and analysis; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations.

• Raytheon has a strong culture of mentoring; it is expected that employees will be both mentors and mentees.

• Collaboration with both Functional and Program higher level management.

• Collaboration with Customer and Suppliers.

• Assignment may require some travel (~25%)

Qualifications You Must Have

• Typically requires a bachelor’s degree in science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience unless prohibited by local laws/regulations

• Ten years of experience in one or more of the following areas:  

  • RF product and subassembly design, integration, and production support

  • Analog, digital, and power electronics design, integration, and production support

  • Deconvolving high level requirements into actionable design electronics and subsystem architectures

• Experience in RF sub-systems, systems engineering, requirement development, requirement validation, Circuit Card Assembly (CCA) Design, RF Test Integration (including RF Test Solutions), and/or RF Supplier Management on an effector-based product

• Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Prior experience as a technical leader on a complex subsystem during Engineering, Manufacturing, and Development (EMD) Phase

• Advanced degree in engineering, mathematics, physics, or related engineering degrees.

• Familiarity with Hypersonic Programs

• Systems engineering thought process with analytical skills background.

• Highly self-motivated individual that can perform multidiscipline work

• Electrical subsystems typically contain antennas, analog RF circuit cards, digital circuit cards, and configurable logic so the ideal candidate will have a background in designing and troubleshooting of one or more of these components. Ideal candidates will also have experience in project leadership, systems engineering and architecture and have a desire to grow to a higher level.

• Able to network / influence outside of the AEGS Department with other design and production support organizations, program leadership, other engineering disciplines and Manufacturing organizations.

• Interpersonal skills with the ability to interact positively with peers, suppliers, management, and customers in a production environment.

• Proven experience in balancing engineering process discipline and innovation for rapid development and program success.

• Experience working with missiles or similar systems.

• Ability to effectively work multiple tasks and priorities.

• Knowledge of mixed signal electronics.

• Practical experience in all phases of the product development lifecycle.

• Experience in developing proposals.

• Experience leading large, complex trade studies

• Experience developing and materializing conceptual designs and integrating them into a system of systems

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

The Avionics Hardware team is a small group of highly motivated engineers who develop the core compute, actuation, sensing, and power electronics products at the heart of our automation system. We enjoy cradle-to-grave hardware ownership and hands-on test, iteration, and deployment of our designs. As a Sr Avionics Hardware Engineer, you will lead development of electrical components and sub-systems across our airborne and test platforms from the circuit-board level up through integrated systems and everything in between.

Responsibilities

In your role as Sr Avionics Hardware Engineer, you will design, analyze, document, test, and troubleshoot electronic assemblies at the circuit board through integrated electro-mechanical level. You will collaborate with a cross-functional team of electrical, mechanical, software, manufacturing and test engineers as the expert on your hardware. You will drive improvements to the hardware through benchtop, environmental, and on-aircraft testing, and perform root-cause investigations to characterize, document, and rectify anomalous behavior in a safety-critical environment. You will contribute to continuous improvement of the team's development processes and practices through technical leadership.

Basic Success Criteria

• Bachelor's degree in electrical engineering, computer engineering, or equivalent experience

• 5+ years of full-lifecycle hardware development experience in a professional environment

• Experience developing and simulating complex and manufacturable printed circuit board assemblies using tools such as Altium Designer and SPICE

• Ability to work within a team, including excellent written and verbal communication skills

• Ability to methodically diagnose, document, and solve electronic hardware problems

Preferred Criteria

• Advanced degree in electrical engineering or computer engineering

• Experience with aviation development assurance standards (e.g. RTCA/DO-254 for Level A/B items or equivalent)

• Experience designing electronics to meet rigorous environmental standards (aerospace, military, automotive, or harsh industrial)

• Deep expertise in high-speed digital design, mixed-signal design, RF design, and/or power electronics design

• Proficiency with Python and/or MATLAB for analysis, data review, and test setup scripting

• Ability to work both independently and as a leader of a high performing team

We're a growing, motivated, fast-paced team of avionics professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.

This role is on-site in Mountain View, CA.

Must be willing to travel 10% of the time.

The estimated salary range for this position is $188,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $188K - $250K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

The Avionics Hardware team is a small group of highly motivated engineers who develop the core compute, actuation, sensing, and power electronics products at the heart of our automation system. We enjoy cradle-to-grave hardware ownership and hands-on test, iteration, and deployment of our designs. As an Avionics Hardware Engineer, you will drive development of electrical components and sub-systems across our airborne and test platforms from the circuit-board level up through integrated systems and everything in between.

Responsibilities

In your role as Avionics Hardware Engineer, you will design, analyze, document, test, and troubleshoot electronic assemblies at the circuit board through integrated electro-mechanical level. You will collaborate with a cross-functional team of electrical, mechanical, software, manufacturing and test engineers as the expert on your hardware. You will drive improvements to the hardware through benchtop, environmental, and on-aircraft testing, and perform root-cause investigations to characterize, document, and rectify anomalous behavior in a safety-critical environment.

Basic Success Criteria

• Bachelor's degree in electrical engineering, computer engineering, or equivalent experience

• Demonstrated ability to complete and ship projects and deliverables

• Professional experience with ECAD tools such as Altium

• Ability to work within a team, including strong written and verbal communication skills

• Ability to methodically diagnose, document, and solve electronic hardware problems

Preferred Criteria

• Professional experience with the full electronics product life-cycle, from conceptual design through production

• Direct hands-on experience with analog, digital, and mixed-signal circuit design, analysis, test, and debug

• Experience designing electronics to meet rigorous environmental standards (aerospace, military, automotive, or harsh industrial)

• Proficiency with Python and/or MATLAB for analysis, data review, and test setup scripting

We're a growing, motivated, fast-paced team of avionics professionals. We move quickly, and everyone wears multiple hats. We're looking for someone who is diligent and detail-oriented who can join our team and make an immediate impact.

This role is on-site in Mountain View, CA. Must be willing to travel 10% of the time.

The estimated salary range for this position is $110,000 to $168,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity. In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $110K - $168K