Manufacturing Code Example Jobs Remote Jobs in Usa

GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains.

As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today’s competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries.

GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems.

Culture:

Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions.

What we are looking for:

Grammer is looking for a Tool and Die Technician to join our team in Delphos, OH. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team!

What you will be doing:

• Provide technical assistance during process and tooling development to meet setup and while assuring process capability
• Produce first pieces required for approval to the specifications required working with Quality Assurance to assure compliance with specifications
• Produce pilot production runs and verifies speed of production and quality of product manufactured
• Verifies dimensions, alignments and clearances
• Experience & Knowledge required with electrical systems, hydraulics, and milling
• Knowledge of Hot Runner Systems, including Synventive, HRS
• Diagnose problems and determine corrective actions
• Complete all associated paperwork having to do with mold maintenance and PM logs
• Connects wiring and hydraulic lines to install electrical and hydraulic components
• Repair, modify and/or adjust molds
• Performs required insert changes and repairs
• Dismantles dies to gain access to and repair die components
• Fabricates and repairs welder plates and supports repair of miscellaneous auxiliary equipment
• Polishing, benching, spotting, grinding, drilling, machining, fitting, welding, operate overhead crane

What you will bring along:

• High school diploma or equivalent required. Technical degree preferred. Journeymans card acceptable instead of technical degree.
• Minimum 2-4 years of related experience
• Ability to work afternoon/midnight shifts as needed
• Ability to work overtime as needed
• Ability to be on call for weekend repairs as needed
• Experience maintaining a clean and organized tool & die area that allows for easy access to molds and equipment/tools
• Must have the ability to multi-task in a fast-paced environment
• Good written and verbal communication skills
• Detail oriented
• Excellent time-management skills with great attention to organization
• Excellent people skills
• Excellent computer skills in Microsoft Office
• Ability to work effectively with all levels of management and large numbers of employees
• Proven experience being flexible and adaptable in challenging situations

What we can provide you:

• Medical, Dental, and Vision coverage eligibility on day 1
• Flex Spending Accounts
• Health Savings Account
• 401(k)
• Volunteer Life Insurance options
• Critical Illness and Accident Insurance
• Tuition Reimbursement Programs
• Robust Employee Assistance Program Services
• Individualized Developmental Opportunities

Over 35 years ago, First Quality is a family-owned company that has grown from a small business in McElhattan, Pennsylvania into a group of companies, employing over 5,000 team members, while maintaining our family values and entrepreneurial spirit. With corporate offices in New York and Pennsylvania and 8 manufacturing campuses across the U.S. and Canada, the companies within the First Quality group produce high-quality personal care and household products for large retailers and healthcare organizations. Our personal care and household product portfolio includes baby diapers, wipes, feminine pads, paper towels, bath tissue, adult incontinence products, laundry detergents, fabric finishers, and dishwash solutions. In addition, we manufacture certain raw materials and components used in the manufacturing of these products, including flexible print and packaging solutions.

Guided by our values of humility, unity, and integrity, we leverage advanced technology and innovation to drive growth and create new opportunities. At First Quality, you’ll find a collaborative environment focused on continuous learning, professional development, and our mission to Make Things Better®.

We are seeking a Safety Engineer for our First Quality facility located in McElhattan, PA.

This position will be responsible for providing technical skills with tactical leadership in the development, operation and support of Environmental, Health and Safety (EHS) policies/programs/procedures to instill and sustain an incident-free work environment while ensuring full compliance with all applicable regulatory agency requirements.

Principal Accountabilities/ Responsibilities:

• Promote an action-oriented approach, instilling and exemplifying a strong EHS mindset for all team members resulting in the elements required to achieve and maintain a world class EHS culture.
• Active facilitation or participation in EHS related meetings and training sessions.
• Develops, manages, and implements Environmental, Health, and Safety policies and procedures in compliance with company, local, State, and Federal rules and regulations.
• Serve as an innovative, flexible EHS resource supporting the company/site/location. Participate in decisions on technical, regulatory, and cultural issues related to Environmental, Health, and Safety.
• Participate and/or lead continuous improvement in EHS policies, programs, and procedures.
• Build and maintain positive working relationships with all team members, vendors, and customers.
• Participate in and/or lead incident investigations to effectively identify root cause/contributing factors and ensure proper implementation of all corrective actions.
• Ensure required EHS training is complete for all employees, newly hired and/or existing, and maintain training records.
• Provide technical support in the design and owner acceptance approval processes of controls for hazardous working conditions and unsafe activities, ensuring compliance with applicable EHS requirements.
• Be present and engaged with the workforce in their activities to establish and strengthen two-way communication, trust, and confidence in your ability to lead them.
• Facilitate communication of company EHS policies, procedures, and standards with all visitors, including contractors and vendors.
• Plan, perform and/or coordinate industrial hygiene sampling, analysis and interpretation of results in compliance with all applicable requirements for the exposure(s) identified.
• Maintain professional knowledge up to date with existing and proposed changes in applicable federal, state and local EHS regulations and standards.
• Participate in and/or lead the development, implementation, and maintaining of all applicable Safety Management Systems.
• Assist in Worker’s Compensation claims administration and coordination of the Return-to-Work program for injured team members.
• Accurate interpretation and application of Environmental, Health, and Safety codes, standards and related professional references (e.g., OSHA, EPA, NFPA, ANSI, ADA, CCOHS, DOT/IATA, etc.).
• Carry out all administrative responsibilities associated with EHS compliance and program administration.
• Conduct regular walk through EHS inspections to identify hazards, document findings, recommend corrective actions that work within given constraints and verification of completed corrective actions and their effectiveness.
• Understand and administer reasonable suspicion and impairment programs used to conduct drug and alcohol testing, and other applicable standards as they may apply.
• Assist and/or lead in establishing risk management processes aimed at hazard condition control and injury prevention through studying incidents, observed and potential hazard conditions in various completed and planned work environments.
• Display consistent measure of integrity and company culture in all business-related activities.
• Track and trend incident data in Safety Management System.
• Responsible for the use and maintenance of all applicable company related data systems, software, peripherals, etc. to complete tasks as assigned.
• Ability to perform multiple tasks and meet deadlines.
• Maintain safety data sheets in SDS Online and physical binders and keep GHS label stations stocked.
• Perform other duties as assigned.

Education and experience requirements:

• Bachelor’s degree in related technical, scientific, or engineering discipline required and/or equivalent experience.
• Minimum 3 years’ experience in Environmental, Health and/or Safety field in Engineer/Specialist/Generalist role required.
• Self-starter with excellent communication and interpersonal skills.
• Strong organizational skills required.
• PC proficiency is a definite.
• Thorough understanding of regulatory compliance of all local, state, and federal safety requirements (OSHA).
• Good working knowledge of EPA regulations.
• Ability to recognize hazardous situations and recommend corrective actions.

What We Offer You

We believe that by continuously improving the quality of our benefits, we can help to raise the quality of life for our team members and their families. At First Quality you will receive:

• Competitive base salary and bonus opportunities
• Paid time off (three-week minimum)
• Medical, dental and vision starting day one
• 401(k) with employer match
• Paid parental leave
• Child and family care assistance (dependent care FSA with employer match up to $2500)
• Bundle of joy benefit (years' worth of free diapers to all team members with a new baby)
• Tuition assistance
• Wellness program with savings of up to $4,000 per year on insurance premiums
• ...and more!

For immediate consideration, please go to the Careers section at to complete our online application.

First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data.

First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.

Job Title: Maintenance Supervisor

Location: Napoleon, OH 43545

Shift: 10:00 PM TO 6:00 AM

Employment Type: 1 Year Contract (Temp to Hire)

Summary: You will be responsible for initial screening of incoming work orders, identification of scope, and analysis of required level of planning. ·

Daily tasks/duties and department interactions:

• Coordinates maintenance activities with appropriate departments to plan and schedule required repairs and p.m.’s utilizing available time and personnel.
• Procure equipment and specialized tools required to perform work.
• Communicates with contractors directly on outsourced work and the performance expectations of that work.
• Works with vendors to identify replacement components and new technology to improve productivity and throughput.
• Maintains function and reliability of facility systems and associated equipment by the PM program; testing systems and equipment, restoring, repairing, rebuilding, or replacing faulty components and parts.
• Assist in all items associated with the quality, production, safety and DOS programs.
• Maintains high standards for housekeeping, safety, and general maintenance.
• Maintain daily timekeeping, work orders, and all records in regard to the maintenance program.
• Ensure all equipment is in safe working order.
• Maintains safe and healthy work environment by following standards and procedures, complying with local and federal codes and regulations.

Experience Preferred:

• Troubleshooting, electrical, hydraulics, pneumatics, PLCs, robotics, welding and basic fabrication.
• Minimum two to three years’ experience as a maintenance, electronic or robotics technician in a manufacturing environment.
• Mechanical experience is preferred.

Requirements:

• 10 years of maintenance experience in a manufacturing environment or 5 years maintenance experience and Bachelor’s degree in business or engineering
• In-depth knowledge of Total Productive Maintenance, continuous improvement, predictive/preventive maintenance programs, and proven effectiveness in MTTF/MTBF reductions.
• Technical experience of Journeymen level.
• Proficient in Microsoft Office.
• Proven ability to appropriately assess and manage risk factors.
• Knowledge of Lean Manufacturing, Kaizen and Kanban.
• Must have the ability to lead projects

Education Preferred:

• High school degree or GED equivalent required

• 
  
• Operate 3 or 4 axis machining centers to perform precision machining operations
  
• Participate in continuous improvement activities.
  
• Analyze data and production reports
  
• Review samples, drawings or instructions to understand specifications of output
  
• Plan the sequence of necessary actions for the completion of a job
  
• Take measurements and mark material for cutting or shaping
  
• Select appropriate machines (e.g. lathes) and position or load material for a job
  
• Determine and program size of batches, speed of machine etc.
  
• Monitor machine while working to adjust the feed, maintain temperature and identify issues
  
• Check output to ensure consistency with specifications and discard defects
  
• Keep records of approved and defective units or final products
  
• Set-up and operate manual and CNC machines to manufacture parts to meet engineering blueprints.
  
• Work closely with CNC programmer to ensure that programs manufacture parts that meet drawing specifications.
  
• Support maintenance of tooling, identifying tooling needs and sharpening tooling as necessary
  
• Operation of one or more CNC machines under the direction of supervisors
  
• Minor maintenance on machines
  
• Load programs and perform simple edits as needed
  
• Adhere to company Malpractice & Ethics Policies
  

• 
  
• High School Diploma (Preferred) or GED
  
• Reliable transportation to and from work
  
• Manual and/or CNC Machining Experience
  
• 3 axis CNC Millsa plus
  
• G&M Code editing a plus
  
• Must be able to use indicators and setting starting coordinates
  
• Use of basic measuring tools
  
• Understand X,Y,Z coordinates
  
• Ability to set up machine and operate it independently (change cutters) adjust speeds, feeds and edits
  
• Troubleshooting skills a plus.
  
• Must be able to lift 30 lbs.
  
• Minimum of 3 years of machining experience. Experience on CNC Mills, Manual Lathes and Mills is preferred.
  
• Ability to interpret shop drawings, layouts and sample parts to determine dimensions and tolerances of finished work pieces, sequence of operation, and set-up requirements
  
• Experience using calipers, micrometers, gauges and other precision measuring instruments is required
  
• Strong attention to detail
  
• Ability to troubleshoot
  
• Fanuc experience is preferable
  
• Good coordination, motor skills, and dexterity
  
• Maintain a clean and safe work environment.
  
• Ensures that all safety procedures are followed as stated on posted signs and in Company policy
  
• Creative thinking and idea generation
  
• Significant manufacturing experience
  
• Ability to communicate information clearly
  
• Ability to collaborate with others and work independently
  

• 
  
• Follows production drawings, sample assemblies and verbal instructions with close supervision. Understands and applies established acceptable workmanship practices to all facets of mechanical assembly.
  
• Interprets and works from schematics, drawings, work instructions and bills of material to understand the required parts and steps needed to complete the assigned assembly.
  
• Makes accurate mathematical calculations and uses precision measuring instruments as required.
  
• Uses a wide variety of hand and power tools to perform skilled fitting and assembly work. Inspect parts and performs basic tests.
  
• Tends machines, such as arbor presses or riveting machine, to perform force fitting or fastening operations on assembly line.
  
• Works at different work stations as production needs require. Works on line where tasks vary as different model of same article moves along line.
  
• Performs intermediate testing, assembly and or disassembly of mechanical assemblies using both traditional and non-traditional tooling such as multimeter, oscilloscope, spectrum analyzer, power supply, function generator, LCD meter, screwdriver, torque wrench, standard wrench, etc.
  
• Mounts complex assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel, requiring manual dexterity and the ability to work with hand tools, power tools, soldering equipment, volt meters and other related test instrumentation. Knowledge of cleaning, lead preparation, component mounting, parts orientation.
  
• Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device.
  
• Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place.
  
• May perform other general assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies.
  
• Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics.
  
• May perform hand soldering using a soldering iron.
  
• May perform work (soldering and general inspection) under microscope.
  
• Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards.
  
• Troubleshoots and replaces defects of finished products.
  
• Reworks and repairs defective units rejected by inspection or test personnel.
  
• Follows safety procedures in the use and handling of flammable and hazardous chemicals required to meet all cleanliness specifications.
  
• Must be able to follow specific procedures and detailed instructions completely.
  
• Ensures that quality checks are completed throughout the manufacturing process.
  
• Records information on production records, logs and other report forms.
  

• 
  
• Oral/Written Communication - Listens and gets clarification; Responds well to questions; Records data; Writes clearly and informatively; Able to read and interpret written information.
  
• Teamwork - Gives and welcomes feedback; Contributes to building a positive team spirit; Supports everyone's efforts to succeed.
  
• Ethics - Treats people with respect; Works with integrity and ethically.
  
• Organizational Support - Follows policies and procedures; Supports organization's goals and values.
  
• Planning/Organizing - Uses time efficiently.
  
• Professionalism - Approaches other in a tactful manner; Accepts responsibility for own actions; Follows through on commitments.
  
• Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality.
  
• Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity.
  
• Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and material properly.
  
• Adaptability - Adapts to changes in the work environment.
  
• Dependability - Follows instructions, responds to management direction.
  
• Attendance/Punctuality - Is consistently at work and on time.
  
• Initiative - Asks for and offers help when needed.
  

• 
  
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
  
• Ability to write routine reports and correspondence.
  
• Ability to speak effectively before groups of customers or employees of organization.
  

• 
  
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  
• Ability to apply concepts of basic algebra and geometry.
  

• 
  
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
  
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
  

• Follows all import/export requirements, consulting with facility import/export personnel as required.

• 
  
• Basic Knowledge of ISO and/or AS9100
  
• Working knowledge of Lean Manufacturing/6 Sigma/Kaizen
  
• Knowledge of specific software (design, analysis, ERP...)
  

• 
  
• US Citizenship with ability to attain/maintain government security clearance.
  
• Ability to travel (domestically/internationally) approximately _+/-10__%.
  

Who is FMI?

FMI Aerostructures is one of the largest independent manufacturing businesses serving the aerospace & defense industry. Our 250-member team has been a trusted supply chain partner that manufactures critical structural components and complex assemblies for major aerospace players for over 40 years.

Why FMI makes a difference?

Customers are at the center of everything at FMI. We are excited that this team can work with key partners like Northrop Grumman and Lockheed Martin using our critical components to help important new aerospace programs take flight. Our machinists are the best in the industry, and we are investing to support their continued success. When they win, our customers win.

Why FMI could be the right fit for your career?

This is an opportunity to work locally for a long-standing, stable business that is investing to grow.

Summary: CNC Machinists are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential.

Essential Duties and Responsibilities:

Requires using hands to handle tools or controls

Requires repetitive movement

Must have vision (with or without assistance) capable of seeing small objects at a close distance

Requires prolonged standing/sitting

Requires lifting up to 25lbs

Responsibilities:

Call up CNC programs

Set-up machine and produce parts

Set up equipment/machinery and install equipment or attachments on machinery or related structures

Read and understand job traveler instructions, technical drawings and set-up diagrams

Measure and record products or materials to control quality

Monitor machinery/equipment operation to detect problems

Use hand tools; Adjust production equipment / machinery setup

Load or unload material onto machinery

Clean equipment or machinery

Apply Procedures and Work Instructions

Required Skills / Experience:

- Ability to read, comprehend and follow instructions and directions

- Must be able to read, speak, write and understand English

- Ability to read blueprints

- Knowledge and the ability to read and understand 1/1000-, 1/100- and 1/10-inch measurements- G and M codes

Compare for correctness, count accurately

Good communication skills

Good interpersonal skills

Self-starter with demonstrated ability to achieve results

Basic mathematics for daily use formulas

Positive attitude, Team player, Manufacturing/CNC experience/background, Cleanroom experience

High school diploma, GED or five (5) years work experience.

This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places and vibration. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually quiet to moderate.

Compensation details: 22-40 Hourly Wage

PI11ab590026c1-26289-37442911

• Set up and operate CNC milling machines nonproduction work
• Modify CNC programs and troubleshoot machining issues
• Verify quality using calipers, micrometers, and other precision tools
• Read and interpret blueprints and technical drawings
• Maintain efficiency and accuracy in a fast-paced environment

• 3+ years' experience setting up and operating multi-axis CNC Mills up to 5-axis
• Complete machining operations from blueprints, drawings and/or verbal instructions
• Work with complex, tight tolerance parts and various materials
• Continuously provide feedback for process improvements
• Mazak and Haas machine experience
• Ability to read drawings and effectively communicate
• Ability to accurately use measuring devices, operate equipment and make adjustments as needed
• PC knowledge
• CNC machining and setup experience in a job shop environment
• Ability to edit/modify CNC programs (G-code)
• Strong knowledge of precision measuring instruments
• Wire EDM and CAD/CAM experience a plus, but not required

PI0d88d59d00c8-26289-39924220

Eaton's IS AER FMC division is currently seeking a Senior CNC Setup Machinist. The hourly rate for this position is $25 - $29 per hour. The hours for this shift are 7:00 am - 3:00 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

Eaton Aerospace Group is currently seeking CNC Setup Machinists to join our 1st shift team. This position is based in our North Charleston, SC facility. Relocation assistance will be provided. The range for this role is $25-29 per hour. This position is currently offering a sign-on bonus of $3,000*; less applicable withholding.

Position Overview: The setup machinist will lead the transition/changeover between production runs on various CNC machines such as mills and lathes then operate select machines through the remainder of the production run while ensuring quality parts from the work cell.

Making what matters work at Eaton takes the passion of every employee around the world. We create an environment where creativity, invention and discovery become reality, each and every day. It's where bold, bright professionals like you can reach your full potentialand where you can help us reach ours.

In This Function You Will: Properly set tools in machine locations required for set-up & perform part changeover including program retrieval and input Establish work offsets (G54, G55, etc.) manually and utilizing probing technology Read, understand, and reset CNC machine program codes Be able to calculate and input axis coordinates for CNC machines up to 3 axis's or use spindle probe to determine work offsets Utilize Geometric Dimensioning and Tolerancing results to make adjustments to work offsets Additional benefits to include: Health insurance effective from first day of employment, air conditioned and well-maintained facility, paid lunch, two weeks of vacation upon hire. Eaton is invested in the learning and development of its employees, offering tuition assistance and capitalizing on new machining and measuring equipment.

Required (Basic) Qualifications: Must have a minimum of five (5) years' experience operating CNC lathes and/or mills in a manufacturing or operations environment or equivalent education Must have three (3) years' experience setting up CNC lathes and/or mills Candidates must be legally authorized to work in the United States without company sponsorship. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Preferred Qualifications: Technical degree in manufacturing, machining, or related field Journeyman's Toolmaker Certification Experience with CNC or conversational programming Experience operating a variety of manual machines (lathes, mills, jig bore, grinders etc.) Familiar with Kaizen, Lean Manufacturing techniques such as Value Stream Mapping, 5S, TPM, Error Proofing, Standardized Work, Set up Reduction, Continuous Flow, and Pull Experience in Troubleshooting Problems using quality tools such as statistics, 8D, 5 Why, Fishbone diagrams, etc. PC computer skills (Excel, Access, Word, Outlook, etc...) with ability to learn other programs Must be able to understand and interpret blueprints and sketches including proficiency in Geometric Dimensioning and Tolerancing (GD&T). Must be able to perform basic shop math. Must have demonstrated mechanical aptitude.

• 
  
• Properly set tools in machine locations required for set-up & perform part changeover including program retrieval and input
  
• Establish work offsets (G54, G55, etc.) manually and utilizing probing technology
  
• Read, understand, and reset CNC machine program codes
  
• Calculate and input axis coordinates for CNC machines up to 3 axis's or use a spindle probe to determine work offsets
  
• Calculate and input axis coordinates X, Y, and Z or use a spindle probe to determine work offsets
  
• Utilize Geometric Dimensioning and Tolerancing results to make adjustments to work offsets
  

• 
  
• Must have a high school diploma or GED from an accredited institution.
  
• Must have a minimum of two (2) years experience operating CNC lathes and/or mills in a manufacturing or operations environment or an Associate's degree or higher in machining or manufacturing related discipline.
  
• A minimum of one (1) years experience setting up CNC lathes and/or mills
  
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
  

• 
  
• Technical degree in manufacturing, machining, or related field
  
• Experience operating a variety of manual machines (lathes, mills, jig bore, grinders, etc.)
  

• 
  
• Able to understand and interpret blueprints and sketches including proficiency in Geometric Dimensioning and Tolerancing (GD&T).
  
• Able to perform basic shop math.
  
• A demonstrated mechanical aptitude.
  

Who is FMI?

FMI Aerostructures is one of the largest independent manufacturing businesses serving the aerospace & defense industry. Our 250-member team has been a trusted supply chain partner that manufactures critical structural components and complex assemblies for major aerospace players for over 40 years.

Why FMI makes a difference?

Customers are at the center of everything at FMI. We are excited that this team can work with key partners like Northrop Grumman and Lockheed Martin using our critical components to help important new aerospace programs take flight. Our machinists are the best in the industry, and we are investing to support their continued success. When they win, our customers win.

Why FMI could be the right fit for your career?

This is an opportunity to work locally for a long-standing, stable business that is investing to grow.

Summary: CNC Machinists are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential.

Essential Duties and Responsibilities:

Requires using hands to handle tools or controls

Requires repetitive movement

Must have vision (with or without assistance) capable of seeing small objects at a close distance

Requires prolonged standing/sitting

Requires lifting up to 25lbs

Responsibilities:

Call up CNC programs

Set-up machine and produce parts

Set up equipment/machinery and install equipment or attachments on machinery or related structures

Read and understand job traveler instructions, technical drawings and set-up diagrams

Measure and record products or materials to control quality

Monitor machinery/equipment operation to detect problems

Use hand tools; Adjust production equipment / machinery setup

Load or unload material onto machinery

Clean equipment or machinery

Apply Procedures and Work Instructions

Required Skills / Experience:

- Ability to read, comprehend and follow instructions and directions

- Must be able to read, speak, write and understand English

- Ability to read blueprints

- Knowledge and the ability to read and understand 1/1000-, 1/100- and 1/10-inch measurements- G and M codes

Compare for correctness, count accurately

Good communication skills

Good interpersonal skills

Self-starter with demonstrated ability to achieve results

Basic mathematics for daily use formulas

Positive attitude, Team player, Manufacturing/CNC experience/background, Cleanroom experience

High school diploma, GED or five (5) years work experience.

This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places and vibration. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually quiet to moderate.

Compensation details: 22-40 Hourly Wage

PI79d00d767bab-26289-37431773