Malcolm Drilling Jobs in Usa

US-ME-Bath

Type: Regular Full-Time

Category: Manufacturing

Salary Grade: ..

Shift: ALL

Overview

The pay range for this position ranges from $30.04/hr - $33.36/hr. Install of ships equipment which includes general machinery, main machinery, weapons systems, remote operating gear etc. which involves layout, tacking, grinding, drilling, reaming, spot facing, bolting, torqueing, testing etc. (but not limited to). And/or Responsible for safely activating, testing and operating of ships, main propulsion and auxiliary systems in accordance with approved procedures, practices and policies. Responsible to comply with approved Departmental Operating Instructions. Read and interpret test memos. Participate in sea trials and work list ship systems to provide direction to the construction mechanics.

Responsibilities

High School Diploma or GED preferred. Experience using basic shop tools, tacking, hand tools, torqueing and portable drilling tools. 2 years Trade or Technical schooling in a mechanical field, or at least 3 years of experience working in a mechanical Field And/or Any of the following: Valid USCG engine license or QMED certification for steam, motor or gas turbine engines A minimum of 3 years Navy or Coast Guard experience in engineering position, minimum E4 pay grade A minimum of 3 years successfully operating and testing shipboard systems

Qualifications

Required - Must be able to read blueprints in detail. Required - Must be able to do layout, read measuring tools, tape measure, inside and outside micrometers, Vernier or dial calipers, and perform simple math calculations. Preferred - Knowledge of equipment alignment, machining, torqueing methods. Preferred - Gas Turbine operating experience Preferred - Hydrostatic flushing and testing systems. Required - Must meet the requirements of the O04 physical task analysis.

• Set up, adjust, and operate a variety of machine tools to produce precision parts and instruments
• Read and interpret engineering drawings and blueprints and follow their instructions
• Machine parts out of metal
• Properly and safely select, align, secure, and remove holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Recognize, deploy, and properly use inserts, fixtures, and tooling
• Must be able to determine the proper tools required to perform given task
• Operate and utilizes lifting aids as necessary to perform work
• Use gauges and precision measuring instruments to meet tolerance requirements
• Perform daily, regular cleaning and light maintenance tasks on machinery and equipment
• Perform all tasks in a safe and responsible manner while maintaining safe and clean working environment by complying with procedures, rules, and regulations
• Work overtime as needed on evenings and/or weekends
• Communicates with others to coordinate work in plant
• Other duties as assigned

• Familiarity with the use of: Heavy Duty Horizontal Lathes, Milling Machines, Horizontal Boring Mills, Vertical Turning Lathes, Planers, Grinders, Drill Presses, Hydraulic Presses, Band Saws, and Portable Tools
• Turning, Drilling, Tapping, Boring, Honing, Polishing machine processes
• Large part machining experience preferred (ship propeller shafting, ship steering gear, etc.)
• In-place machining experience is desired
• Forklift and Crane experience preferred

• Medical, Dental and Vision Insurance
• Company provided Medical Clinic/Pharmacy access
• 401K with company match
• Paid Time Off
• Short Term Disability and basic Life Insurance provided by company
• Supplementary Insurance: Accident, Critical Illness, Voluntary Life/AD&D, and Long Term Disability available
• Employee Assistance Programs

• High school diploma or GED
• 3 to 5 years of related experience is preferred.
• Language skills - effectively communicate and understand job instructions verbally and written in English
• Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner
• Ability and willingness to learn
• Ability to define problems, collect data, establish facts, and draw valid conclusions
• Ability to interpret various technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
• A strong, proven interest in engineering and mechanical systems
• Ability to read and interpret blueprints
• Ability to read precision measuring tools
• Ability to perform basic mathematical computations
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
• Ability to work independently and as part as a team
• Basic understanding of Microsoft Word and Excel

• Ability to move or transfer products with an overhead crane
• Ability to lift and move up to 50 lbs. at a time when required
• While performing the job duties, the employee is regularly required to stand, walk, reach overhead with hands and arms, stoop, crouch, kneel, climb ladders, and use stairs
• Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus
• The employee will also be expected to spend time using a computer

• Ensure work is done safely and meets quality standards.
• Must have own basic skill related tools and equipment if not supplied by the workplace.
• Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames.
• Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
• Locate and mark reference lines, such as center, buttock, and frame lines.
• Position parts in hull of ship.
• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
• Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding.
• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
• May prepare molds and templates for fabrication of nonstandard parts.
• May tack weld clips and brackets in place prior to permanent welding.
• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.
• Ensure work is done safely and meets quality standards.
• Assemble items as instructed by floor supervisor.
• Keep work areas clean and organized and take proper care of all equipment and facilities.
• Follow all company rules and policies.
• Provide a great level of attention to detail and focus on the given task.
• Work with team members to maximize productivity and efficiency.
• Prepare product for shipment.
• Report any unsafe work conditions or practice to supervisor.
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
  

• None
  

• Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
• Familiarity with the metric system
• Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
• Ability to stand continuously for long periods of time.
• Ability to identify and measure material.
• Ability to follow instructions given both verbally and in written form.
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic.
• Knowledge of machines and tools, including their designs and uses.
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
  

• High school graduate, or GED preferred.
• Six months to one-year related experience and/or training
• Experience with steel, aluminum and/or stainless steel required.
  

• Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime.
• Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions.
• Work over extended periods of time in tightly configured confined spaces.
• Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing.
  

• Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools. Items listed are a representative sample but not an all-inclusive list.
  

• May be made to enable qualified individuals with disabilities to perform essential job functions.
  

The Certified Nursing Assistant (CNA), under the direction and supervision of the Director of Nursing and/or the assigned charge nurse, provides individualized care to residents to include routine daily care, promoting maximum independence, safety, and comfort for each resident.

• Makes rounds to resident rooms at least every two hours to ensure resident needs are met to include toileting, turning, repositioning, and hydration; makes walking rounds at shift change with the oncoming CNA ensuring resident rooms are tidy and in good condition; communicates any pertinent changes or things that are occurring with the residents during walking rounds ensuring a seamless transition of care; checks the care base, country kitchen, and soiled and clean utility rooms during walking rounds for tidiness; issues found during rounds will be addressed by the off-going shift
• Observes unusual symptoms or signs of illness or skin breakdown and reports same to nurse in charge; reports indications of residents deteriorating physical, emotional, or mental health through the utilization of the Interact Stop and Watch documents
• Listens to change of shift report and communicates with charge nurse on what shift priorities should be
• Provides care in accordance with the resident care profile and resident preferences
• Administers bed baths daily and showers twice per week unless resident requests otherwise
• Distributes and sets up resident meal trays; assists the residents who need assistance with their meals, encourage intake, and accurately document intake
• Provides daily and weekly personal care including oral hygiene, fingernail trimming, dressing daily and throughout the day as needed, assisting with toileting or changing throughout the day as needed
• Positions residents properly using comfort and safety devices as ordered; repositions bedridden residents every two hours or more often as directed
• Takes vital signs according to resident plan of care or as assigned by supervising charge nurse
• Assists with bladder and bowel training of selected incontinent residents
• Makes rounds of incontinent residents every two hours to provide partial bathing and change of clothing and linen as needed; cleans carpet or furniture if needed and notifies Housekeeping for sanitation
• Answers resident call lights in a timely manner, politely, and with focused concern on the resident; maintains a goal of answering each call light in under four minutes
• Answers the phones located at the care base or nurses station when appropriate; provides professional and courteous direction to the party on the phone
• Assists with the admission and discharge of resident and post mortem care
• Completes the shift responsibility checklist for the specific shift assigned
• Assists with weighing of residents on admission, once a month, and as ordered; if weight is greater than set parameters, reports weight change to the nurse
• Assists residents in the use of adaptive equipment including splints, adaptive plates, bowls, cups and utensils, reachers, sliding boards, walkers and wheelchairs
• Appropriately addresses all allegations or sightings of potential abuse/neglect by rescuing the resident, reporting it immediately and reassuring the resident
• Empties urinary drainage bags twice per shift, and totals output for nurse in charge; passes, empties, and sanitizes bedpans and urinals as needed
• Makes sure residents clothing is clean, puts soiled clothing in hamper and puts away clean laundry
• Assures overall neatness and cleanliness of residents room, bedside equipment, and bathroom; makes beds and returns clothing and equipment to proper place
• Participates in mandatory in-services/drills
• Serves an active role in actual Emergency Operations scenarios to ensure the safety of the residents
• Assists with transportation of residents to and from activities; involves residents in daily activities when time allows; engages residents in one on one activities as part of daily routine
• Assists with moving a resident from one room to another including bed/mattress and personal belongings
• Accurately documents care provided to assigned residents using MyUnity Point of Care daily prior to leaving for the day
• Performs all work in a safe manner; reports any safety hazards to the Charge Nurse immediately including improper disposal of medications and sharps; uses safe lifting and transfer techniques and proper body mechanics at all times; complies with emergency drills; maintains infection control standards
• Reports damaged or unsafe equipment to the Charge Nurse while discontinuing the utilization of the piece of equipment; clearly labels the equipment as faulty so that no other employee uses it
• Maintains a positive attitude to ensure dignity and quality of life for residents, and maintains positive interaction with guests and coworkers
• Serves as a positive mentor for new staff members, training them in the proper policies and procedures to ensure quality of care
• Performs all other duties as assigned

BENEFITS (Full-Time and Part-Time Plus employees)

Health, Dental & Vision Insurance

FSA & HSA

403(b) Retirement Plan*

529 College Savings Plan*

Long-Term Care Insurance

Legal Resources

Paid Time Off

Holiday Pay*

Corporate Wellness Program*

Health Club & Spa Membership*

Employee Education & Training Fund*

Employee Assistance Program

Credit Union Membership*

* Part-Time employees eligible

Williamsburg Landing is a non-profit, independent community offering a vibrant lifestyle for residents.

Apply online at .

EOE/Tobacco Free/Drug Free

PI31e2e12d9f

• 
  
• Operates various hand tools, such as pliers, vice grips, hammers, squares, chisels, and screwdrivers, and power tools, such as grinders, drills, come-a-longs, saws, hydraulic knock-outs, and hydraulic jacks, to fit filter units.
  
• Uses TIG welding to put together parts of a filter unit.
  
• Reads blueprints to know how to fit metal parts together.
  
• Measures and uses math skills to accurately place parts and drill holes.
  
• Operates a crane or hand truck to move filter units.
  
• Performs minor maintenance on the welding machines.
  
• Performs housekeeping duties in the welding area.
  
• Performs other duties as assigned by management.
  

• 
  
• Must successfully pass an AAF TIG Welding test.
  
• Must be capable of learning to build any product from a blueprint with minimal assistance.
  
• May be required to obtain a crane operator's license.
  
• Strong written and verbal communication skills.
  
• Various welding skills are needed.
  
• Skill is needed to be able to operate hand and power tools.
  

Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day.

Pay: $20.00 - $25.00 Per hour, depending on experience

As an employee of Wagstaff, youll enjoy:

Paid non-working holidays

Monthly, site-wide BBQs

Up to 8% retirement contribution

Annual bonus program

1200 Sqft onsite gym, accessible 24/hrs a day

Family-friendly company-wide events

To review our full benefits summary, please visit

Want to learn more about Wagstaff? Join us for a virtual tour!

Job Summary

Assist with various types of welding, brazing, and cutting using gas and electric welding equipment under the instruction of production personnel. Support the activities of the welding team. The welder helper will ensure an organized work environment, and adequate maintenance of equipment and materials. Will guarantee welders have tools and materials, such as filler metal and grinding discs available, and operate welding machines, grinders, hammers, beveling machines, torches and magnetic drills. You will be familiar with various metals such as carbon and stainless steel.

To ensure success you will pay attention to minute details, which will save costs associated with errors and consequent reworks.

Primary Job Responsibilities

• Maintain cleanliness of work areas
• Assisting welders to set up work areas with tools and fixtures
• Move rigs/fixtures between work areas
• Ensuring welders have required materials and tools available, such as rods and grinding discs
• Maintaining levels of materials and supplies
• Loading and unloading machines and fixtures
• Employing sanders and grinders to clean welds
• Maintaining knowledge of various types of metal
• Operating various tools and types of equipment
• Identifying safety risks and hazards, and complying with relevant safety procedures and regulations
• Transport parts using forklifts/carts to and from the weld work areas.
• Assist with fabrication of equipment by cutting, burning, drilling, and grinding
• Clean and prepare surfaces to be welded
• Abide by company policies
• In order to achieve business objectives, work weeks in excess of 40 hours may be required
• Other duties as assigned

• Minimum of one (1) year working in a welding, manufacturing, construction, or related environment
• Accredited trade or vocational school welding certificate is preferred

Working Environment

While performing the duties of this job, the employee will be exposed to moving mechanical parts, machinery and equipment, and vibration. The employee may be exposed to fumes or airborne particles and toxic or caustic chemicals. While performing some job duties, there is a risk of electrical shock and other risks associated with a manufacturing environment. Job duties may require work in high, precarious places, work in outside weather conditions, and exposure to extreme temperatures in some cases. The noise level in the working environment is often loud. Because of this environment and associated risks, use of job appropriate personal protective equipment and clothing is required.

Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff.

Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

PM22

PIc72b3c9b89cd-26289-39988752

• 
  
• Operate conventional manual machining tools including engine lathes, horizontal lathes, milling machines, grinders, drilling machines, and related equipment
  
• Safely use overhead, gantry cranes, and lift trucks, and associated lift rigging
  
• Perform mechanical measurements using portable mechanical instruments such as dial indicators, micrometers, and portable vibration measurement equipment
  
• Machine and fabricate parts using engine lathes, grinders and drill presses
  
• Draw accurate prints for parts needing to be fabricated
  

• 
  
• At least 2 years of related experience, 6 years preferred using manual machining equipment, or equivalent education and experience preferred
  
• Ability to read micrometer measuring equipment
  
• Motor shop, machine shop, tool & die stamping, or oil field experience preferred
  
• Ability to operate manual lathes of various sizes and dimensions
  
• Ability to operate electroplating equipment
  
• Ability to work with tolerances of +/- .001
  
• Ability to perform basic math functions
  
• Ability to understand, perform, and retain various job-related training, operational, and safety procedures
  
• Ability to work overtime and weekends as required
  

• 
  
• Paid Time Off (PTO)
  
• 401k Employer Match
  
• Bonus Incentives
  
• Tuition Reimbursement Program
  
• Medical, Dental and Vision plans
  
• Employee Assistance Program (EAP)
  
• And more!
  

• 
  
• Promotes safety and quality at all times.
  
• Maintain a clean and organized work area.
  
• Conducts him or herself in a professional manner at all times when working with internal and external customers.
  
• Advanced knowledge of machine equipment and machining operations of various machines: horizontal and vertical lathes, layout machines, vertical boring mills, horizontal mills, grinders, deburring tools, fixtures, radial and angular drill press, forklifts, cranes and various forms of rigging, jib hoists, personal computers, and other required tools necessary to perform the job.
  
• Advanced knowledge and accuracy in using various measuring devices: micrometers, indicators, calipers, gauges, and other required tools necessary to perform the job.
  
• Full understanding of use for tooling, drawings, work scopes, procedures, specifications and documentation to perform the primary function of the job.
  
• Performs most complex setups and machine tool operations. This includes turning, boring, facing, milling, drilling, reaming, tapping, sawing, slotting, grooving, grinding, and other required actions to complete the job.
  
• Ability to work to extremely close tolerances.
  
• Ability to read and comprehend drawings, sketches, job scopes, and verbal instructions.
  
• Maintains equipment by completing basic preventive maintenance requirements and notifying the appropriate representative for troubleshooting and repairs.
  
• Able to accurately measure and record all dimensional inspections as needed and pass annual dimensional inspection tests.
  
• Ability to complete layouts of most parts.
  
• Ability to train other employees in operation of equipment, reading prints, selection of tooling and machining equipment, along with repair processes.
  
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
  
• Documents actions by completing production and quality logs.
  
• Accepts ownership over work performance and stays abreast of job knowledge and new skill development.
  

• 
  
• High School Diploma or Equivalency
  
• Machining capabilities on manual lathes and mills
  
• Experiences with turbines, compressors and other rotating equipment is a plus
  

• 
  
• Prior manufacturing, sign shop, wood working, or display exhibit craftsmanship is a plus.
  
• Comfortable using basic hand tools (i.e., drills, hammer, utility knife, wrenches & screw drivers).
  
• Ability to read shop drawings, tape measure and ruler.
  
• Strong attention to detail with a focus on quality & ability to distinguish colors.
  
• Ability to work independently with minimal supervision and as a team to meet production schedules.
  
• Demonstrated ability to have reliable and predictable attendance and punctuality.
  
• Ability to lift and maneuver 35-75lb materials on a regular basis.
  
• Ability to handle oversize products - large prints, signage, billboards, etc.
  
• Ability to communicate and understand directions in English both verbally and written is required.