Lucid Gravity Climate Control Jobs in Usa
6,269 positions found
Job Title: Master Automotive Technician / Mechanic Location: 3838 N Fry Rd, Katy TX 77449 Job Overview: We are one of the fastest growing locations in the Christian Brothers Automotive organization. Very busy shop trending to make $3 million in 2024!. We treat our technicians like family. We are looking for Technicians who are energetic, upbeat, and have a positive attitude. The Technicians we are looking for have to seek out tough problems and challenges and not get discouraged or frustrated. And, Technicians must have a strong passion for their work and focus on doing what's right for our guests. Christian Brothers Automotive was built on the basic principle that honesty and integrity should be the driving force behind the business. Our facilities are HIGH VOLUME owned and operated by our valued franchisee partners, and are equipped with technology normally only found in newer dealership service centers. With this combination, you can enjoy a clean, upbeat work environment with access to the tools you need to get the job done right the first time. Responsibilities include, but are not limited to: Perform a wide range of automotive repairs.Accurately diagnose guests repairs.Review TSB's and other service recommendations and translate to guest needs.Honestly assess vehicles and build a detailed estimate of necessary repairs.Communicate cause and correction for guest concerns regarding their vehicle.Address any concerns from guests and interface with them on their vehicle as needed.Maintain professionalism.Keep shop in clean, working order.Complete full, accurate, and honest courtesy inspections in service to our guestsMaster MFG level diagnostic tools (MFG scan tools and subscriptions provided by CBA)
Qualifications: ASE MASTER CERTIFICATIONS ARE A PLUS AND QUALIFIES YOU FOR GREATER HEALTHCARE CONTRIBUTIONSDrive to flag 60+ hours per week4+ years automotive repair experience is required.Applicants must be team oriented, energetic and have an upbeat attitude.Capable of diagnosing and repairing any/all types of vehicles.Flexible and Focused on maintaining a high level of customer satisfaction.Strong aptitude and ability to accurately and quickly perform alignments.Ability to quickly master factory scan tools. Physical Requirements: Occasionally lift and/or move over 100 pounds.Be able to work with tools on vehicles lifted above their head.Work in tight spaces as dictated by the vehicle's needed repair.Have the needed dexterity in order to efficiently use hand-toolsWalk/stand for the majority of the workday.Drive manual transmission vehicles.Keeping a brisk work pace in a high-volume environment.Efficiently navigate a computer.
Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Keywords: Automotive Technician, Location: Katy, TX - 77491
Electronics Technician / Electronics Specialist Orangeburg, SC
COMPANY PROFILE:
- Company is over 140 years old
- Orangeburg facility is one of 6 manufacturing sites for this company in the US and is the newest plant in the system / Climate controlled / Non-Union
- Our client services a variety of industries including Electric Utility, Oil & Gas, Chemical, Military Bases, Railroad, Hospitals, Transit, Pulp and Paper, and more
- Committed to a high level of customer service and maintaining an exceptional reputation
WHAT THIS COMPANY OFFERS YOU:
All the benefits and the strong compensation that you would expect from an employer of this caliber including:
- Medical / Dental Plan
- OT Eligible
- Prescription coverage Plan
- Company Paid Short Term Disability and Life
- 401k with Match
- Education Reimbursement
- 2 weeks’ vacation to start and 10 paid holidays and 1 paid anniversary day off
- Exceptional Work Environment
THE ROLE YOU WILL PLAY:
The Electronics Specialist is responsible for solving problems not resolved by plant electricians. This includes working closely with electricians to resolve problems and requires mechanical knowledge of the equipment. This position reports directly to the Plant Engineering Manager.
- Program, maintain, troubleshoot, and repair Programmable Logic Controllers utilizing PC and manufacturer’s programming software. Recognize and correct potential problems in programs on new equipment installs as well as streamline programs for maximum efficiency and safety.
- Install, calibrate, troubleshoot, and repair process instrumentation and control equipment such as PID loop controllers, I/P and E/P converters, pressure transducers, and pneumatic actuators
- Maintain, calibrate, and repair electronic scales and other ingredient weighing devices to include documentation to ensure ISO 9000 requirements are met.
- Setup, program, troubleshoot and repair variable speed AC and DC drive systems and related instrumentation and control equipment such as tach generators, pulse encoders, strain gauges, and dancer control systems.
- Install, maintain, troubleshoot, and repair Process laser micrometer measuring equipment and associated instrumentation and control equipment
- Assist Facilities Engineering in specifying, installing, and commissioning of new equipment.
- Assist Process Engineering and Production personnel on implementation of processes and design changes.
- Communicate with vendors for repair/purchase of equipment.
BACKGROUND PROFILE:
- Associates Degree or higher in Industrial Electronics Technology or similar
- Allen Bradley PLC Programming Experience
- 5 years or more experience
- Good computer Skills related to machinery control. HMI, PLC Programming, Ladder Logic
- Working knowledge of word processor programs and spreadsheets (MS Word and Excel)
- Working knowledge of related test equipment (oscilloscope, Multimeter, recorders, megohmmeter, digital low resistance OHM meters, etc.)
- Ability to work independently or as part of a team.
Quality Control Manager – Machine Parts
Location: West Chester, Pennsylvania
Industry: Precision Medical Device Manufacturing
Job Type: Full Time | 100% Onsite
Shifts: 1st (7:00am–3:30pm), 2nd (3:00pm–11:30pm)
Position Overview
Leads quality control activities for precision-machined medical device components. Responsible for inspection planning, First Article and in-process inspections, nonconformance management, ISO compliance, ERP tracking, and mentoring quality staff across machining cells and shifts.
Core Responsibilities
- Develop and oversee inspection plans across machining cells
- Perform and review First Article Inspections and in-process inspections
- Lead nonconformance investigations, MRBs, and corrective actions
- Maintain ISO 9001 and ISO 13485 compliance
- Track quality data and documentation within ERP systems
- Train and mentor inspectors and machinists on quality standards
- Support internal audits and calibration programs
Must-Have Qualifications
- 5+ years quality experience in precision machining environment
- Strong blueprint reading and GD&T knowledge
- Experience performing FAIs and in-process inspections
- Experience managing nonconformance and corrective actions
- Familiarity with ISO 9001 and ISO 13485 systems
- Ability to mentor and train quality personnel
Preferred Qualifications
- CNC or Swiss machining background
- Experience supporting audits and calibration programs
- ERP system experience in manufacturing setting
- Engineering degree or equivalent hands-on experience
Work Environment & Process
- Precision, climate-controlled medical device facility
- Regulated and quality-driven environment
- Uniforms and safety equipment provided at no cost
- Overtime based on production demands
- Interview process includes virtual interviews, onsite visit, and skills assessment
Quality Control Roving Inspector
Location: West Chester, Pennsylvania
Industry: Precision Medical Device Manufacturing
Job Type: Full Time | 100% Onsite
Shifts: 1st (7:00am–3:30pm), 2nd (3:00pm–11:30pm)
Relocation: Available case by case
Position Overview
Performs in-process and final inspections across multiple machining cells. Acts as a floor-level quality resource supporting machinists and inspectors to maintain quality standards within a regulated medical device environment.
Core Responsibilities
- Perform in-process and final inspections across machining cells
- Support machinists and production teams with quality questions
- Inspect parts using calipers, micrometers, comparators, and other precision tools
- Identify and document nonconformances
- Support corrective actions and quality improvements
- Ensure compliance with ISO 9001 and ISO 13485 standards
Must-Have Qualifications
- 5+ years quality experience in precision machining environment
- Strong blueprint reading and GD&T knowledge
- Experience performing in-process and final inspections
- Proficiency using calipers, micrometers, and comparators
- Working knowledge of ISO 9001 and ISO 13485 standards
- Strong communication and problem-solving skills
Preferred Qualifications
- CNC or Swiss machining background
- Experience generating NCRs and supporting corrective actions
- Experience mentoring inspectors or production staff
- Quality certifications such as CQT, CQI, or Six Sigma
Work Environment & Process
- Precision, climate-controlled medical device facility
- Regulated and quality-driven environment
- Uniforms and safety equipment provided at no cost
- Overtime based on production demands
- Interview process includes virtual interviews, onsite visit, and skills assessment
Now Hiring: HVAC Controls Technician
Location: St Louis, Missouri
Schedule: Full-time | Flexible Hours (7:30 AM – 4:30 PM typical shift)
About the Role
We’re looking for a motivated and skilled HVAC Controls Technician to join our growing team! An HVAC Controls Technician is responsible for programming, troubleshooting, startup, checkout, and servicing of Building Automation Systems (BAS). Key duties include configuring and optimizing system performance, diagnosing and resolving issues, and ensuring proper integration of HVAC controls. The technician will also work closely with project teams, contractors, and clients to ensure seamless operation and functionality of the BAS. Strong technical expertise in control systems, problem-solving skills, and the ability to work independently in field environments are essential for this role. If you enjoy hands-on problem-solving, working with advanced control systems, and seeing your work directly impact performance — this opportunity is for you. This full-time position offers flexible scheduling, typically with 8-hour shifts during office hours (7:30 AM – 4:30 PM).
What You’ll Do
- Program, configure, and optimize Building Automation Systems (BAS).
- Perform startup, checkout, and commissioning for new projects.
- Troubleshoot control issues and resolve HVAC system integration challenges.
- Conduct point-to-point verification and ensure systems meet design specifications.
- Assist with field service calls during project and warranty phases.
- Guide and support electrical subcontractors on project sites.
- Deliver materials, monitor installations, and maintain communication with the project team.
- Update and correct manual drawings for engineering and documentation accuracy.
- Participate in the on-call rotation and assist with support agreements.
- Collaborate with management to develop a personalized professional growth plan.
What We’re Looking For
- Strong time management and problem-solving skills
- Excellent communication and customer service mindset
- Action-oriented and dependable under pressure
- Understanding of HVAC systems, electrical wiring diagrams, and basic networking
- Positive, team-oriented attitude
- Valid driver’s license and ability to pass a background check and drug screening
Nice to Have:
- 1+ years of experience in HVAC, Electrical, or Automation systems
- Advanced computer or networking skills
- Associate’s or Technical Degree in HVAC, Electrical, or Automation
What We Offer
We believe great work deserves great rewards — that’s why we invest in your success and well-being:
Health & Wellness
- 100% Employer-Paid Medical, Dental & Vision Insurance for Employees
- Life Insurance
- FSA/HSA Accounts
- Short & Long-Term Disability
- Employee Assistance Program
- Fitness Reimbursement
Career & Financial Benefits
- Simple IRA Retirement Plan
- Tuition Reimbursement & Paid Training Opportunities
- Bonuses & Overtime Opportunities
- Growth potential – We love to promote from within!
- Boot Credit
Work-Life Balance
- Paid Time Off, Paid Holidays & Personal Time
- Flexible Schedule & Parental Leave
- Company Vehicle, Phone, and Fuel Expenses
- On-Call Incentives
- Fun and Collaborative Team Culture
Join a company where your work truly powers performance.
If you’re ready to take your HVAC controls career to the next level with a team that values growth, collaboration, and innovation — we’d love to hear from you!
Apply today and start building smarter with us.
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Quality Control Inspector III/ CMM Programmer
Overview:
The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments.
Minimum Required Qualifications :
- Technical school diploma or equivalent combination of education and experience.
- Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment.
- Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments.
- Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection.
- Familiar with AQL, sampling methods and traceability.
- Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
- Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc.
- Must be a US Citizen.
Essential or Primary / Key Responsibilities :
- Train other inspection personnel on CMM software and manual measurement techniques.
- Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods.
- Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis.
- Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages.
- Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL
- Reconcile final inspection documentation for shipments
- Interact with source inspector as needed and part-take in source inspection duties if necessary.
- Read, understand and interpret Mechanical/Electronic drawings.
- Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step.
- Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor.
- Approve finished products by confirming specifications, conducting visual and physical measurement of the product.
- Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database
- Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs
- Work with Engineering, Operations, and other sources to resolve issues and meet goals
Additional Duties / Responsibilities :
- Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required).
- Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
- Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
- Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
- Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals
- Consistently demonstrate commitment to company values
- Keep management informed of area activities and of any significant problems
- Assume responsibility for related duties as required or assigned
- Ensure that work area and work areas of direct reports are clean, secure, and well maintained
- Complete special projects and miscellaneous assignments as required
Work Environment :
- While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud.
- This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required).
- This is a full-time position. Overtime and weekend work may be required as job duties demand.
- Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers.
.
Physical Requirements :
- While performing the duties of this job, the employee is regularly required to talk and hear.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening
- The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
The employee may be required to lift and/or move items weighing up to 25 pounds.
This position is at our Montville, NJ office location.
Pay Range: $30.50 - $38.00/hour
Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts.
At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed.
Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency.
Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture.
If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at ARE ENCOURAGED TO APPLY
No agencies, please.
Pay Range: $30.50 - $38.00 per hour
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description of the Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (but not required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
Immediate placement available.
Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with some exceptions.
Job Type: Independent Contractor
QualificationsWe are currently seeking inspector applicants who are qualified to work in the USA and have a history of direct experience completing commercial line inspections and/or have completed a training course such as the VIITA Basic Commercial Line Inspector course or its equivalent.
Full Job Description Of The Loss Control Inspector- Receives assignments electronically and reviews for inspection requirements.
- Schedules the inspection appointment with the Insured by phone, email, or text.
- Inspects the property for potential issues or hazards pertaining to utilities/building systems (heating, wiring, plumbing), common areas, maintenance, protections, and life safety, etc. Take 20-35 exterior/interior photos. Take measurements with a measuring wheel or with online tools as needed.
- Interviews the Insured for operations information, ages of the building systems, etc.
- Communicates inspection status through online application.
- Completes the inspection report on the web-based Loss Control 360 system with Rapid Sketch. Returns the completed report electronically (the reports consist of check-off questions, narrative, and digital photos).
- 3-5 years' experience providing commercial insurance loss control inspections
- Understanding of commercial property and casualty lines: property, general liability, and worker's compensation
- Ability to work independently, manage your time effectively, and communicate well verbally and in writing
- Comfortable completing reports online and uploading documents
commercial building inspection ~ fire safety ~ industrial safety ~ environmental safety ~ construction work ~ customer service ~ online reporting and document handling ~ ability to travel approximately a 50-mile radius
Helpful (But Not Required) Professional CertificationsCSP, OHST, ALCM, ARM
H&S Loss Control Inspections, Inc Company InformationWe have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Our friendly support staff are available to help you by assigning orders and assisting with questions. Despite the challenges presented by recent events, H&S has been continuing to grow and successfully serve our customers with excellent reports and time service!
We look forward to hearing from all qualified applicants!
