Logic Pro X Jobs in Usa
2,548 positions found — Page 11
S
Occupational Therapist - Occupational Therapy - Inpatient
✦ New
Salary not disclosed
Job Summary
Plans and implements specific treatment programs for neonatal through geriatric patients according to accepted Occupational therapy practices and principles. Collaborates with interdisciplinary treatment team.
Physical Requirements
Visual and Hearing Requirements
Working Conditions
Primarily Works in a well-lighted and air-conditioned environment with period of heavy workload and stress. Works in various conditions.
Performance: Essential Functions
Decision Making: Ability to make decisions and takes appropriate action based on the information they have. Recognizes own limitations and consults with the supervisor, manager, or team member when appropriate.
Time Management: Works efficiently and manages duties to ensure that tasks are completed with accuracy and within the scheduled shift or reasonable amount of time.
Quality & Quantity: Demonstrates accurate, knowledge and skill to carry out job duties. Follows departmental work policies and procedures. Speed and consistency of output and time utilization of job duties.
Computer Knowledge & Electronic Equipment Use: Demonstrates ability to consistently utilize electronic equipment and online computer programs to perform job duties, including electronic documentation, and order entry.
Resource Utilization: Consistently utilizes and maintains supplies and equipment to minimize lost charges and unnecessary equipment repair-replacement.
Confidentiality: Adheres to established policies on privacy and security requirements for compliance with the Health Insurance Portability and Accountability Act (HIPAA), as applicable by Shannon Policy.
Responsibilities
Supervises the Following Positions
Positions: Occupational Therapy Assistant, Occupational Therapy Aides, and students/observers
Performance: Position Specific Essential Functions
Education
Experience: N/A
Certification/Licensure:
Plans and implements specific treatment programs for neonatal through geriatric patients according to accepted Occupational therapy practices and principles. Collaborates with interdisciplinary treatment team.
Physical Requirements
- The ability to perform the duties and responsibility of the position, with or without reasonable accommodations for disabilities.
- The ability to consistently lift, push or pull loads of up to fifty (50) pounds. (Unless nursing 50)
- Sufficient strength, mobility and stamina to make frequent location and position changes, assist with patient care, and perform other physical activities of average difficulty.
- Candidates whose disabilities make them unable to meet the requirements will still be considered fully qualified if they can perform the essential functions of the job with reasonable accommodations.
- May be exposed to infectious or contagious disease.
- May have to handle emergency situations.
- May be subject to irregular hours.
- May be required to wear protective equipment such as eye protection, face protection, masks, sterile/nonsterile gloves, isolation gowns.
- May be exposed to toxic/caustic/chemicals/detergents.
- Physical activities include continuous sitting, and occasional walking, standing, bending, squatting, climbing, kneeling and twisting.
- Activity Conditions (Occasionally, Frequently, Continuously):
- Sitting- Occasionally
- Walking- Frequently
- Standing- Frequently
- Bending-Frequently
- Squatting - Frequently
- Climbing-Occasionally
- Kneeling-Frequently
- Twisting-Frequently
Visual and Hearing Requirements
- Must be able to see with corrective eye wear.
- Must be able to hear clearly with assistance.
Working Conditions
Primarily Works in a well-lighted and air-conditioned environment with period of heavy workload and stress. Works in various conditions.
Performance: Essential Functions
Decision Making: Ability to make decisions and takes appropriate action based on the information they have. Recognizes own limitations and consults with the supervisor, manager, or team member when appropriate.
Time Management: Works efficiently and manages duties to ensure that tasks are completed with accuracy and within the scheduled shift or reasonable amount of time.
Quality & Quantity: Demonstrates accurate, knowledge and skill to carry out job duties. Follows departmental work policies and procedures. Speed and consistency of output and time utilization of job duties.
Computer Knowledge & Electronic Equipment Use: Demonstrates ability to consistently utilize electronic equipment and online computer programs to perform job duties, including electronic documentation, and order entry.
Resource Utilization: Consistently utilizes and maintains supplies and equipment to minimize lost charges and unnecessary equipment repair-replacement.
Confidentiality: Adheres to established policies on privacy and security requirements for compliance with the Health Insurance Portability and Accountability Act (HIPAA), as applicable by Shannon Policy.
Responsibilities
Supervises the Following Positions
Positions: Occupational Therapy Assistant, Occupational Therapy Aides, and students/observers
Performance: Position Specific Essential Functions
- Able to self-assess, self-correct, and self-direct; to identify needs and sources of learning; and to continually seek new knowledge and understanding through participation in professional organizations, educational programs, current literature, in-service meetings, peer case reviews, workshops, etc; shares new knowledge with co-workers.
- Establishes rapport and works cooperatively and effectively with interdisciplinary team members including: patients, physicians, families, colleagues and other healthcare professionals throughout patients' intervention programs. Effectively handles cultural and ethnic diversity issues.
- Effectively communicates with interdisciplinary team members including patients, physicians, families, colleagues and other healthcare professionals (i.e. verbal, non-verbal, reading, writing and listening) for varied audiences and purposes.
- Identifies sources of professional feedback, seeks out professional feedback and provides professional feedback to effectively improve personal interaction.
- Ability to question logically; to identify, generate and evaluate elements of a logical argument; to recognize and differentiate facts and assumptions; and to distinguish between the relevant and the irrelevant.
- Recognizes and defines problems; analyzes data, develops and implements solutions and evaluates outcomes.
- Maintains department policies, procedures, objectives and quality improvement programs; follows safety and infection control policies/procedures; assists with maintenance of departmental supplies and equipment; participates and positively promotes department program development and cohesion.
- Identifies sources of stress and develops effective coping behaviors/strategies.
- Assists with student training by accepting the role as a Clinical Instructor and promoting student education within the profession. Completes required student assessments timely and receives positive feedback assessments from their student and school.
- Assists in orienting, training and mentoring staff. Accepts the mentor role willingly and assists in ensuring that appropriate department orientation is completed in a timely manner.
- Nurtures other team members and builds productive relationships across the immediate work team and with other areas that impact the patient experience. Actively listens to others, encourages others opinion and help problem-solve. Acknowledges others for their ideas and efforts while positively contributing to the work plan. Readily accepts and promotes change.
- Evaluates patients, gathering data from a variety of sources; assesses patients' performance and determines level of function and intervention needs.
- Develops and implements individualized treatment programs for patients needing service; updating selected activities and/or tasks to promote and maintain health and achieve treatment goals; establishes and modifies intervention goals and strategies for patients' treatment programs based on ongoing evaluations and in accordance with the profession and organization standards.
- Prepares written documentation as required by the profession and the department.
- Effectively assists in discharge planning and effectively communicates patients' discharge needs with the interdisciplinary team; assists in identifying the need for the most appropriate and cost-effective adaptive equipment and training in order to help patients regain maximum physical function.
- Promotes and utilizes evidence-based practice. Participates in evidence-based activities such as department journal clubs, in-services, etc.
- Performs other duties as assigned.
Education
- Required
- High School Diploma, GED, or equivalent
- Bachelor's degree in Occupational Therapy
Experience: N/A
Certification/Licensure:
- Required
- Licensed Occupational Therapist
permanent
3
Senior Software Engineer
✦ New 🏢 3DEO
Salary not disclosed
Job Title: Senior Software Engineer Slicer Manufacturing Platform Development
Department: RD
Reports to: Chief Operating Officer
Employment Type: Full-Time
FLSA Status: Exempt
The Company:
3DEO is a leader and innovator in sinter-based additive manufacturing (AM), delivering proprietary and differentiated AM solutions that drive breakthrough product performance. With some of the industrys highest-volume capabilities in metal 3D printing, 3DEO combines cutting-edge manufacturing with multi-disciplinary engineering and product development expertise.
Our patented and award-winning technology has revolutionized how customers approach design, enabling high-volume production with unmatched quality, precision, and cost efficiency. Holding roughly 20 patents, 3DEO is more than a manufacturer we are a trusted partner in solving complex challenges and unlocking the full potential of AM.
At 3DEO, we collaborate closely with customers in industries such as medical, industrial, aerospace, and semiconductors, delivering end-to-end solutions that include RD, design, engineering, prototyping, production, and beyond.
Since our founding in 2016, our greatest strength has been our team. At 3DEO, innovation is approached as a team. Together, we tackle the toughest product development challenges, helping our customers bring visionary ideas to life. Join our passionate and collaborative team at 3DEO, where were transforming whats possible in metal additive manufacturing and making what hasnt been made before.
Job Summary:
The Senior Software Engineer will contribute to the development of 3DEOs proprietary slicing engine and the end-to-end software platform that powers our metal 3D printing process. This role focuses on geometry processing, toolpath generation, and digital workflows used across our vertically integrated production system. Ideal candidates have experience building slicers, simulation tools, or manufacturing automation software and enjoy working at the intersection of software and hardware in a fast-moving RD environment.
Essential Functions:
? Develop and maintain core slicing algorithms including path planning, infill generation, and motion logic
? Implement and optimize geometry processing tools (mesh repair, offsetting, tessellation, Boolean ops)
? Contribute to the architecture of the internal production platform, including job tracking and printer interfacing
? Integrate slicing logic with upstream and downstream systems including UI, hardware control, and analytics
? Collaborate closely with mechanical, controls, and process engineers to translate physical constraints into software rules
? Write clean, well-documented, and testable code to support scalable manufacturing
? Participate in code reviews and technical design discussions
Required Qualifications:
? Strong programming skills in C++, Rust, or Python
? Experience with computational geometry, 3D data structures, or mesh processing
? Familiarity with additive manufacturing toolchains or CNC-style toolpath generation
? Ability to work in a cross-functional RD environment with hardware and process teams
? Comfortable building production-grade software in a fast-paced, iterative setting
? Experience with continuous integration (CI) pipelines, static code analysis, and unit testing
Preferred Qualifications:
? Experience with industry standard or related geometry engines/libraries
? Familiarity with motion control systems, G-code generation, or machine integration protocols
? Background in data pipelines or job tracking for manufacturing operations
? Prior work on metal additive manufacturing or CNC-based systems
Education and Experience:
? Bachelors degree in Computer Science, Software Engineering, or related technical field required
? 5+ years of experience in software development, with at least 12 years in a manufacturing, robotics, or 3D graphics setting
? Open-source contributions to slicing software or experience building AM/CAM toolchains is a plus
Physical Requirements and Work Environment:
? Primarily office/lab-based with some machine interaction
? Must be able to occasionally inspect physical parts or collaborate with operators near equipment
#SPCareers
Not Specified
T
Data Quality Analyst / Data Steward
Salary not disclosed
Job Requisition: Data Quality Analyst / Data Steward Contract Length: Long Term – Potential renewal each fiscal year Work Location: 100% onsite – Montgomery, AL Candidate Profile Experienced data professional capable of building, advancing, and scaling data quality and governance foundations from scratch.
Able to operate independently in low structure environments, collaborate across business and IT, and deliver high quality, AI ready data ecosystems.
Role Purpose Establish, advance, and mature data quality and governance capabilities in a green field, low maturity data environment.
Support enterprise analytics, BI, and AI/ML readiness through SQL/ETL engineering, data profiling, validation, stewardship, metadata management, and early stage data architecture.
Drive long term improvement of data standards, definitions, lineage, and quality processes.
Key Responsibilities Data Quality & Engineering Perform data audits, profiling, validation, anomaly detection, and quality gap identification.
Develop automated data quality rules and validation logic using T SQL, SQL Server, stored procedures, and indexing strategies.
Build and maintain SSIS packages for validation, cleansing, transformation, and error detection workflows.
Troubleshoot ETL/ELT pipelines, data migrations, integration failures, and data load issues.
Conduct root cause analysis and implement preventive and long term remediation solutions.
Optimize SQL queries, tune stored procedures, and improve data processing performance.
Document audit findings, validation processes, data flows, standards, and quality reports.
Build dashboards and reports for data quality KPIs using Power BI/Tableau.
Data Stewardship & Governance Define, maintain, and enforce data quality standards, business rules, data definitions, and governance policies.
Monitor datasets for completeness, accuracy, timeliness, consistency, and compliance.
Ensure proper and consistent data usage across departments and systems.
Maintain business glossaries, data dictionaries, metadata repositories, and lineage documentation.
Partner with IT, data engineering, and business teams to support governance initiatives and compliance requirements.
Provide training on data entry, data handling, stewardship practices, and data literacy.
Collaborate with cross functional teams to identify recurring data issues and recommend preventive solutions.
GreenField / LowMaturity Environment Architect initial data quality frameworks, validation layers, governance artifacts, and ingestion patterns.
Establish scalable data preparation workflows supporting analytics, BI, and AI/ML readiness.
Mature data quality and governance processes from ad hoc to standardized, automated, and measurable.
Drive adoption of data quality and governance practices across business and technical teams.
Support long term evolution of enterprise data strategy and governance maturity.
Required Technical Skills Advanced T SQL, SQL Server development, debugging, and performance tuning.
SSIS development, deployment, and troubleshooting.
Data profiling, validation rule design, quality scoring, and measurement techniques.
ETL/ELT pipeline design, debugging, and optimization.
Data modeling (conceptual, logical, physical).
Metadata management and lineage documentation.
Reporting and dashboarding with Power BI, Tableau, or similar tools.
Strong documentation and communication skills.
Preferred Skills Knowledge of DAMA DMBoK, DCAM, MDM concepts, and governance frameworks.
Experience in low maturity/green field data environments.
Familiarity with AI/ML data readiness and feature store aligned data structuring.
Cloud data engineering exposure (Azure, Databricks, GCP).
Education Bachelor’s degree in Information Systems, Computer Science, Data Science, Statistics, Business Analytics, or related field.
Master’s degree preferred.
Certifications (Preferred) DAMA CDMP (Associate/Practitioner) EDM Council DCAM ASQ Data Quality Credential Collibra Data Steward Certification Certified Data Steward (eLearningCurve) Cloud/AI certifications (Azure, Databricks, Google)
Able to operate independently in low structure environments, collaborate across business and IT, and deliver high quality, AI ready data ecosystems.
Role Purpose Establish, advance, and mature data quality and governance capabilities in a green field, low maturity data environment.
Support enterprise analytics, BI, and AI/ML readiness through SQL/ETL engineering, data profiling, validation, stewardship, metadata management, and early stage data architecture.
Drive long term improvement of data standards, definitions, lineage, and quality processes.
Key Responsibilities Data Quality & Engineering Perform data audits, profiling, validation, anomaly detection, and quality gap identification.
Develop automated data quality rules and validation logic using T SQL, SQL Server, stored procedures, and indexing strategies.
Build and maintain SSIS packages for validation, cleansing, transformation, and error detection workflows.
Troubleshoot ETL/ELT pipelines, data migrations, integration failures, and data load issues.
Conduct root cause analysis and implement preventive and long term remediation solutions.
Optimize SQL queries, tune stored procedures, and improve data processing performance.
Document audit findings, validation processes, data flows, standards, and quality reports.
Build dashboards and reports for data quality KPIs using Power BI/Tableau.
Data Stewardship & Governance Define, maintain, and enforce data quality standards, business rules, data definitions, and governance policies.
Monitor datasets for completeness, accuracy, timeliness, consistency, and compliance.
Ensure proper and consistent data usage across departments and systems.
Maintain business glossaries, data dictionaries, metadata repositories, and lineage documentation.
Partner with IT, data engineering, and business teams to support governance initiatives and compliance requirements.
Provide training on data entry, data handling, stewardship practices, and data literacy.
Collaborate with cross functional teams to identify recurring data issues and recommend preventive solutions.
GreenField / LowMaturity Environment Architect initial data quality frameworks, validation layers, governance artifacts, and ingestion patterns.
Establish scalable data preparation workflows supporting analytics, BI, and AI/ML readiness.
Mature data quality and governance processes from ad hoc to standardized, automated, and measurable.
Drive adoption of data quality and governance practices across business and technical teams.
Support long term evolution of enterprise data strategy and governance maturity.
Required Technical Skills Advanced T SQL, SQL Server development, debugging, and performance tuning.
SSIS development, deployment, and troubleshooting.
Data profiling, validation rule design, quality scoring, and measurement techniques.
ETL/ELT pipeline design, debugging, and optimization.
Data modeling (conceptual, logical, physical).
Metadata management and lineage documentation.
Reporting and dashboarding with Power BI, Tableau, or similar tools.
Strong documentation and communication skills.
Preferred Skills Knowledge of DAMA DMBoK, DCAM, MDM concepts, and governance frameworks.
Experience in low maturity/green field data environments.
Familiarity with AI/ML data readiness and feature store aligned data structuring.
Cloud data engineering exposure (Azure, Databricks, GCP).
Education Bachelor’s degree in Information Systems, Computer Science, Data Science, Statistics, Business Analytics, or related field.
Master’s degree preferred.
Certifications (Preferred) DAMA CDMP (Associate/Practitioner) EDM Council DCAM ASQ Data Quality Credential Collibra Data Steward Certification Certified Data Steward (eLearningCurve) Cloud/AI certifications (Azure, Databricks, Google)
Not Specified
D
Java Developer
Salary not disclosed
Conceives, designs, and tests logical structure to meet program requirements.
Writes programs according to specifications provided.
Builds, deploys and maintains programs, Web Site pages and applications.
Develops and improves site navigation and applications.
Responsible for the design, development, and configuration of software systems to meet market and/or client requirements.
Updates, repairs, modifies, and expands existing computer programs.
Writes, tests, and maintains computer programs.
Develops code using Java, C#, HTML, Javascript, or other programming languages.
Responsible for design and development of Java code for a large-scale Federal IT Program.
Provides technical site maintenance and advice on moderately complex issues related to animation, search engine techniques, link integrity, navigation, browsers, graphics, and other technical web developments.
Prepares functional specifications from which programs will be written and then designs, codes, debugs, and documents programs.
Develops the requirements of a product from inception to conclusion.
Tests, debugs, and refines the software to produce the required product Designs user interfaces of interactive web applications including ADA 508, and cross browser compliance.
Maintains compliance with standards and conventions in developing programs.
Develops required specifications for simple to moderately complex programs or problems.
Conducts systems tests, monitors test results, and takes appropriate corrective action for the non-routine issues.
Creates coded unit tests and works with Testers/Information Assurance to address program and/or security findings.
Prepares required documentation, including block diagrams, logic flow charts and software program documentation.
Minimum Qualifications Bachelor’s Degree in Computer Science, Information Systems or a related field or equivalent relevant experience.
2+ years of experience with programming or web development activities.
Active Secret Clearance Ability to report to the client site in Annapolis Junction, MD (up to 3x a week) Other Job Specific Skills 2+ years of hands-on Java development experience.
Experience with J2EE or other Java frameworks (e.g.
Spring).
Experience using Java development tools (e.g.
Eclipse, JUnit, Git).
2 years of work experience with Web development technologies (HTML, JSP, etc.).
2+ years of Java development experience in order to build enterprise applications.
2+ years’ experience with using Java development tools (e.g.
Eclipse, JUnit, Git).
Ability to report to the client site in Annapolis, Junction, MD (up to 3x a week).
Experience in a large scale Federal IT Program.
Experience with SAFe Agile delivery framework.
#cjpost Bachelor’s Degree in Computer Science, Information Systems or a related field or equivalent relevant experience.
2+ years of experience with programming or web development activities.
2+ years of hands-on Java development experience.
2 years of work experience with Web development technologies (HTML, JSP, etc.).
2+ years of Java development experience in order to build enterprise applications.
2+ years’ experience with using Java development tools (e.g.
Eclipse, JUnit, Git).
Active Secret Clearance Ability to report to the client site in Annapolis Junction, MD (up to 3x a week)
Writes programs according to specifications provided.
Builds, deploys and maintains programs, Web Site pages and applications.
Develops and improves site navigation and applications.
Responsible for the design, development, and configuration of software systems to meet market and/or client requirements.
Updates, repairs, modifies, and expands existing computer programs.
Writes, tests, and maintains computer programs.
Develops code using Java, C#, HTML, Javascript, or other programming languages.
Responsible for design and development of Java code for a large-scale Federal IT Program.
Provides technical site maintenance and advice on moderately complex issues related to animation, search engine techniques, link integrity, navigation, browsers, graphics, and other technical web developments.
Prepares functional specifications from which programs will be written and then designs, codes, debugs, and documents programs.
Develops the requirements of a product from inception to conclusion.
Tests, debugs, and refines the software to produce the required product Designs user interfaces of interactive web applications including ADA 508, and cross browser compliance.
Maintains compliance with standards and conventions in developing programs.
Develops required specifications for simple to moderately complex programs or problems.
Conducts systems tests, monitors test results, and takes appropriate corrective action for the non-routine issues.
Creates coded unit tests and works with Testers/Information Assurance to address program and/or security findings.
Prepares required documentation, including block diagrams, logic flow charts and software program documentation.
Minimum Qualifications Bachelor’s Degree in Computer Science, Information Systems or a related field or equivalent relevant experience.
2+ years of experience with programming or web development activities.
Active Secret Clearance Ability to report to the client site in Annapolis Junction, MD (up to 3x a week) Other Job Specific Skills 2+ years of hands-on Java development experience.
Experience with J2EE or other Java frameworks (e.g.
Spring).
Experience using Java development tools (e.g.
Eclipse, JUnit, Git).
2 years of work experience with Web development technologies (HTML, JSP, etc.).
2+ years of Java development experience in order to build enterprise applications.
2+ years’ experience with using Java development tools (e.g.
Eclipse, JUnit, Git).
Ability to report to the client site in Annapolis, Junction, MD (up to 3x a week).
Experience in a large scale Federal IT Program.
Experience with SAFe Agile delivery framework.
#cjpost Bachelor’s Degree in Computer Science, Information Systems or a related field or equivalent relevant experience.
2+ years of experience with programming or web development activities.
2+ years of hands-on Java development experience.
2 years of work experience with Web development technologies (HTML, JSP, etc.).
2+ years of Java development experience in order to build enterprise applications.
2+ years’ experience with using Java development tools (e.g.
Eclipse, JUnit, Git).
Active Secret Clearance Ability to report to the client site in Annapolis Junction, MD (up to 3x a week)
Not Specified
Maintenance Tech 3
🏢 FedEx
Salary not disclosed
Shift Sunday
- Saturday
- 3rd Shift (Night/Overnight) Shift 8:00pm-8:00am Alternating days Week 1 Mon, Tues, Thurs, Fri Week 2 Weds, Sat, Sun Maintenance Tech III Position Summary Maintenance Technician III is responsible for advanced installation, maintenance, and complex troubleshooting of mechanical, electrical, pneumatic, and hydraulic systems with minimal supervision, often mentoring junior staff and diagnosing root causes for machinery failures, requiring skills in interpreting schematics, conducting preventative maintenance, and managing complex repairs, including on-call duties.
This position is responsible for product safety, quality and legality.
Primary Responsibilities Diagnosing and fixing intricate mechanical, electrical, hydraulic, and pneumatic issues, often serving as the final point of escalation for complex problems Performing scheduled and emergency repairs, including preventative maintenance, equipment upgrades, and adapting new production equipment Reading and applying complex blueprints, schematics, and technical manuals to understand system operations Guiding and training less experienced technicians on procedures and complex repairs Fixing worn/damaged parts, disassembling/reassembling equipment, and testing for proper function Maintaining detailed repair logs, performance data, and work records, typically using a Maintenance tracking software system Assisting with work schedules and ordering necessary parts and supplies, ensuring sufficient parts are stored in inventory to minimize downtime due to equipment failures PLC logic job functions involve designing, programming (often in ladder logic), installing, testing, and maintaining automated control systems for industrial machinery PLC needs include writing code, integrating hardware (sensors, actuators), troubleshooting failures, providing technical support, and collaborating with engineering teams to optimize systems Following safety protocols, using appropriate PPE, and managing hazardous exposures Communicate at a high level to peers and other department employees Providing after-hours or weekend emergency repair services Other duties as assigned Education/Experience High School diploma or equivalent required and 4+ years of experience performing mechanical maintenance duties in a manufacturing/packaging environment, or equivalent combination of vocational education and experience Must have exceptional problem solving and maintenance skills Excellent verbal and written communication skills Customer service driven Strong team player Requirements, Perks, and Benefits (US-Non-Exempt) Physical/Cognitive Requirements (with or without accommodation) Ability to follow policies and procedures.
Ability to read, write and interpret information.
Ability to add, subtract, multiply and divide.
Ability to use hands to finger, handle, or feel.
Ability to sit/walk/stand for duration of shift Must possess visual acuity to perform essential job functions.
Ability to conduct physical tasks with a full range of motion throughout the warehouse environment.
Ability to lift/carry items up to 50 pounds Equal Opportunity Employer FedEx Supply Chain, Inc., is an Equal Opportunity Employer including, Vets/Disability.
Know your Rights • Pay Transparency Family and Medical Leave Act (FMLA) Employee Polygraph Protection Act E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S.
Citizenship and Immigration Services’ E-Verify program (For U.S.
applicants and employees only).
Please click below to learn more about the E-Verify program: E-Verify Notice ( bilingual ) Right to Work Notice ( English ) / ( Spanish ) FedEx Supply Chain is committed to providing access, equal opportunity, and reasonable accommodation for qualified individuals with disabilities in its application procedures, hiring, and other terms and conditions of employment.
To request a reasonable accommodation, please contact Perks and Benefits at FedEx Supply Chain (FSC): Competitive Pay: FedEx Supply Chain offers competitive hourly rates depending on your location and experience.
401(k) plan with company match after 1 year Tuition reimbursement program Holiday pay and accrued paid time off programs offering both Vacation and PTO Medical, dental, vision and voluntary benefits available on day one Basic life Insurance Basic AD&D coverage Supplemental Life and Supplemental AD&D Short-Term and Long-Term Disability coverage for full time employees following 180 days of service.
Paid parental leave for both moms and dads Paid bereavement and jury duty Note: Pay is based on several factors including but not limited to, market location and may vary depending on job-related knowledge, skills, education/training, and a candidate’s work experience.
Job Disclaimer (US) Please note that this job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
The Company reserves the right to modify duties or assign additional responsibilities as necessary to meet business needs.
- Saturday
- 3rd Shift (Night/Overnight) Shift 8:00pm-8:00am Alternating days Week 1 Mon, Tues, Thurs, Fri Week 2 Weds, Sat, Sun Maintenance Tech III Position Summary Maintenance Technician III is responsible for advanced installation, maintenance, and complex troubleshooting of mechanical, electrical, pneumatic, and hydraulic systems with minimal supervision, often mentoring junior staff and diagnosing root causes for machinery failures, requiring skills in interpreting schematics, conducting preventative maintenance, and managing complex repairs, including on-call duties.
This position is responsible for product safety, quality and legality.
Primary Responsibilities Diagnosing and fixing intricate mechanical, electrical, hydraulic, and pneumatic issues, often serving as the final point of escalation for complex problems Performing scheduled and emergency repairs, including preventative maintenance, equipment upgrades, and adapting new production equipment Reading and applying complex blueprints, schematics, and technical manuals to understand system operations Guiding and training less experienced technicians on procedures and complex repairs Fixing worn/damaged parts, disassembling/reassembling equipment, and testing for proper function Maintaining detailed repair logs, performance data, and work records, typically using a Maintenance tracking software system Assisting with work schedules and ordering necessary parts and supplies, ensuring sufficient parts are stored in inventory to minimize downtime due to equipment failures PLC logic job functions involve designing, programming (often in ladder logic), installing, testing, and maintaining automated control systems for industrial machinery PLC needs include writing code, integrating hardware (sensors, actuators), troubleshooting failures, providing technical support, and collaborating with engineering teams to optimize systems Following safety protocols, using appropriate PPE, and managing hazardous exposures Communicate at a high level to peers and other department employees Providing after-hours or weekend emergency repair services Other duties as assigned Education/Experience High School diploma or equivalent required and 4+ years of experience performing mechanical maintenance duties in a manufacturing/packaging environment, or equivalent combination of vocational education and experience Must have exceptional problem solving and maintenance skills Excellent verbal and written communication skills Customer service driven Strong team player Requirements, Perks, and Benefits (US-Non-Exempt) Physical/Cognitive Requirements (with or without accommodation) Ability to follow policies and procedures.
Ability to read, write and interpret information.
Ability to add, subtract, multiply and divide.
Ability to use hands to finger, handle, or feel.
Ability to sit/walk/stand for duration of shift Must possess visual acuity to perform essential job functions.
Ability to conduct physical tasks with a full range of motion throughout the warehouse environment.
Ability to lift/carry items up to 50 pounds Equal Opportunity Employer FedEx Supply Chain, Inc., is an Equal Opportunity Employer including, Vets/Disability.
Know your Rights • Pay Transparency Family and Medical Leave Act (FMLA) Employee Polygraph Protection Act E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S.
Citizenship and Immigration Services’ E-Verify program (For U.S.
applicants and employees only).
Please click below to learn more about the E-Verify program: E-Verify Notice ( bilingual ) Right to Work Notice ( English ) / ( Spanish ) FedEx Supply Chain is committed to providing access, equal opportunity, and reasonable accommodation for qualified individuals with disabilities in its application procedures, hiring, and other terms and conditions of employment.
To request a reasonable accommodation, please contact Perks and Benefits at FedEx Supply Chain (FSC): Competitive Pay: FedEx Supply Chain offers competitive hourly rates depending on your location and experience.
401(k) plan with company match after 1 year Tuition reimbursement program Holiday pay and accrued paid time off programs offering both Vacation and PTO Medical, dental, vision and voluntary benefits available on day one Basic life Insurance Basic AD&D coverage Supplemental Life and Supplemental AD&D Short-Term and Long-Term Disability coverage for full time employees following 180 days of service.
Paid parental leave for both moms and dads Paid bereavement and jury duty Note: Pay is based on several factors including but not limited to, market location and may vary depending on job-related knowledge, skills, education/training, and a candidate’s work experience.
Job Disclaimer (US) Please note that this job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
The Company reserves the right to modify duties or assign additional responsibilities as necessary to meet business needs.
Not Specified
J
Programmer II
✦ New 🏢 JT4 LLC
Salary not disclosed
JT4 provides engineering and technical support to multiple western test ranges for the U.S.
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
We develop and maintain realistic integrated test and training environments, and prepare our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
What You Will Do with JT4 This programming position is for the Telemetry Network Standards(TMNS) development team.
This programmer will assist with automated testing, crafting cutting test cases, and transforming telemetry into bi-directional communication links for our flight test network infrastructure.
Job Functions & Duties Basic understanding of Linux, SHELL scripting, and automating routine tasks Ability to use programing languages C, C#, C++ Understanding of GITLAB to include merge requesting and branch structures Knowledge of Win32, Windows API, specifically for creating graphical user interfaces TCP/UDP network programming knowledge for developing applications that communicate over networks Makefile basic concept understanding for automating the build process of software projects Understanding of software development lifecycle Designs and writes basic to moderately complex computer programs Prepares flowcharts and diagrams to illustrate a sequence of steps that a program must follow and to describe logical operations involved Monitors performance of programs after implementation Assists in analysis, review, and alterations to programs to increase operating efficiency or to adapt to new requirements Prepares documentation to describe programs development, logic, coding, and corrections Assists in developing user manuals to describe installation and operating procedures Performs related work, as required OTHER RESPONSIBILITIES
- Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS
- Typical office environment with no unusual hazards, occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE
- Bachelor's degree in Computer Programming; or equivalent technical training from an accredited academic institution, completion of a recognized certification program, or equivalent experience and demonstrated skills, knowledge, and technical competence in computer programming.
Possess three years of additional related experience.
Must have demonstrated proficiency with required computer languages and have a basic to good understanding of computer systems including networks, servers, and personal computers In addition, a Programmer II must possess the following qualifications: Must possess some planning and organizing skills and demonstrate the ability to work under Must possess verbal and written communication skills sufficient to permit interaction with other employees as well as taking work direction from senior unit personnel Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license Must be a U.S.
citizen.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement The expected pay range for this position is $83,000 to $100,000 annually The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
DISCLAIMER
- The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JSD12, A1412TW
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
We develop and maintain realistic integrated test and training environments, and prepare our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
What You Will Do with JT4 This programming position is for the Telemetry Network Standards(TMNS) development team.
This programmer will assist with automated testing, crafting cutting test cases, and transforming telemetry into bi-directional communication links for our flight test network infrastructure.
Job Functions & Duties Basic understanding of Linux, SHELL scripting, and automating routine tasks Ability to use programing languages C, C#, C++ Understanding of GITLAB to include merge requesting and branch structures Knowledge of Win32, Windows API, specifically for creating graphical user interfaces TCP/UDP network programming knowledge for developing applications that communicate over networks Makefile basic concept understanding for automating the build process of software projects Understanding of software development lifecycle Designs and writes basic to moderately complex computer programs Prepares flowcharts and diagrams to illustrate a sequence of steps that a program must follow and to describe logical operations involved Monitors performance of programs after implementation Assists in analysis, review, and alterations to programs to increase operating efficiency or to adapt to new requirements Prepares documentation to describe programs development, logic, coding, and corrections Assists in developing user manuals to describe installation and operating procedures Performs related work, as required OTHER RESPONSIBILITIES
- Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS
- Typical office environment with no unusual hazards, occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness.
REQUIREMENTS
- EDUCATION, TECHNICAL AND WORK EXPERIENCE
- Bachelor's degree in Computer Programming; or equivalent technical training from an accredited academic institution, completion of a recognized certification program, or equivalent experience and demonstrated skills, knowledge, and technical competence in computer programming.
Possess three years of additional related experience.
Must have demonstrated proficiency with required computer languages and have a basic to good understanding of computer systems including networks, servers, and personal computers In addition, a Programmer II must possess the following qualifications: Must possess some planning and organizing skills and demonstrate the ability to work under Must possess verbal and written communication skills sufficient to permit interaction with other employees as well as taking work direction from senior unit personnel Must qualify for and maintain a government security clearance Must possess a valid, state-issued driver's license Must be a U.S.
citizen.
BENEFITS Medical, Dental, Vision Insurance
**Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement The expected pay range for this position is $83,000 to $100,000 annually The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4 LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
DISCLAIMER
- The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JSD12, A1412TW
Not Specified
H
Mechanical Design Engineer
$33.46 - 50.19
What Makes a Honda, is Who makes a Honda
Honda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”
We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.
If your goals and values align with Honda’s, we want you to join our team to Bring the Future!
Job PurposeAs an Engineer within Seat and Package Development Department you are expected to provide logical designs as part of a project team supporting model developments. Working with project team members and crossfunctionally, you are expected to learn, grow, and develop your know-how and engineering skills.
Key Accountabilities- Engineering Solution Design – Draft engineering solutions for an assigned component / part (or more complex parts with supervision) and the associated drawings and validation processes, to gather data and provide feedback on their feasibility, costs, quality, and performance.
- Engineering Specifications – Carry out a range of activities under the direct guidance and supervision of more senior engineers to draft engineering specifications for an assigned component / part and the evaluation of their effectiveness, to inform manufacturing work in the organization and / or of its suppliers. Ensure functional safety standards are met.
- Data Collection and Analysis – Collate and analyze data using pre-set tools, methods, and formats. Involves working independently.
- Integration & Correlation – Work to collaborate and integrate your design into the vehicle with other groups under the direct supervision of more senior engineers. Learn from interactions with other groups (i.e. design, testing, manufacturing, styling, service) for the assignment at hand.
- Supplier Management – Work with existing suppliers to mature designs and address issues in a timely manner to achieve project requirements.
- Documentation – Prepare logical and conclusive documentation for review by more senior engineers to record and submit all necessary development/testing/research information as the respective activities mature.
- Project Management – Work within an established project management plan to achieve specific goals such as schedule, cost, investment, or weight. Provide regular updates and contribute in project team meetings.
- Personal Development – Develop own expertise and capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching. Gain or maintain external professional accreditations where relevant to improve performance and fulfil personal potential. Build proficiency in relevant technology and increase knowledge of external regulations and industry best practices through ongoing education, conferences, and specialist publications.
Minimum Educational Qualifications:
- BS Mechanical, Aero, Automotive or equivalent Engineering experience
- BS Bio-Mechanical, Bio-Medical, or equivalent Engineering experience
- BS Industrial Design or equivalent industry experience
Minimum Experience:
- 3+ months engineering experience including co-op, internship, senior project, or equivalent
Other Job-Specific Skills:
- Past experience with CAD software (CATIA V5 or V6 preferred)
- Proficient in Microsoft Office programs
- Ability to travel and work overtime as required
- Primary working location is seated at a desk
- Limited lifting of parts and part dunnage maybe required on occasion
permanent
S
Entry Level Software Developer
Salary not disclosed
SkillStorm is actively seeking full-time Entry Level Software Developers for one our Fortune 100 clients. An ideal candidate is one with a strong technical mindset, exceptional problem-solving skills, and logical reasoning abilities. This is an on-site position.
You will spend 12 weeks collaborating in team-based settings, undertaking diverse, real-world projects to prepare for seamless integration into our clients' operations. Once training is complete, you will be deployed to our enterprise or government clients, ready to have an immediate impact on day one.
Entry Level Software Developer Requirements:
- Must possess a Bachelor's degree
- Must have 9 months+ of TECHNICAL experience
- Must be relocatable to multiple different locations and in office
- Ability to earn a government security clearance
- Possess a strong understanding of programming principles, data structures, algorithms, databases, and SQL, enabling the development of software solutions.
- Experience with software development and programming using Java, C#, or similar object-oriented programming language.
- Legally authorized to work in the U.S. under SkillStorm's W2; not a C2C position. EOE, including disability/vets.
- Strong analytical and problem-solving skills along with a logical mindset to tackle complex challenges to develop effective and innovative solutions.
- Demonstrate excellent verbal and written communication skills, facilitating clear and effective interactions with team members, stakeholders, and clients.
Entry Level Software Developer Responsibilities
- Develop new applications and modify existing applications using programming languages, platforms, frameworks, and tools used by our clients.
- Develop well-structured, readable, and efficient code to solve specific tasks or improve existing applications. Adhere to coding standards and best practices to maintain high-quality software.
- Identify, diagnose, and fix bugs in software applications, ensuring that the applications run smoothly and efficiently. Provide technical support and problem resolution related to software issues.
- Engage in code review sessions with peers to ensure code quality, share knowledge, and learn from others. Provide constructive feedback and suggest improvements to optimize performance.
- Assist in the deployment and testing of applications to production environments, ensuring that they meet performance benchmarks and are compatible with other system components.
- Work closely with other departments, such as quality assurance, project management, and product management, to ensure that projects are delivered on time and meet predefined objectives. Communicate ongoing activities and results to business sponsors, stakeholders, and management.
Where SkillStorm stands out:
- Competitive salary
- Enterprise level technology training and certification
- Opportunity to work for enterprise companies and government agencies
- Health, Vision, Dental, and Life Insurance with 401K
- Continuous mentorship and support
About SkillStorm
Founded in 2002, SkillStorm was built on the mission of accelerating careers in high-demand technologies. We design, build, and deploy Stormers from all backgrounds and experience levels in today's in-demand technologies such as AWS, Salesforce, PEGA, ServiceNow, and Appian.
We are committed to hiring and training college graduates and veterans for high-growth technology careers with our enterprise and government clients. Through these dedicated efforts, we are able to build a reliable, exclusive pipeline of high-quality, U.S.-based tech talent with the skills and clearance levels required to support our client's critical technology initiatives.
Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Not Specified
A
Mid-Tier Application and Database Developer
Salary not disclosed
About Us
AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future.
AGE Solutions is a premier technology and professional services company, providing in-depth consulting, advanced technology solutions, and essential services throughout the U.S. government, defense, and intelligence sectors. Prioritizing innovation and client-focused solutions, we assist major agencies in addressing intricate issues and ensuring a more secure future.
AGE is seeking a Software Developer with strong C# and database expertise to join our development team. This role focuses on building and maintaining robust middle-tier services and data-driven applications. The candidate will work closely with cross-functional teams to design, develop, maintain and optimize scalable backend systems that power critical business functionality.
The ideal candidate combines solid middle-tier development experience with deep database development knowledge and a strong understanding of system design, performance, maintainability, and data integrity.
This role is hybrid in Philadelphia, PA, requiring onsite reporting at the customer's facility at least 1 day/week. Candidates must reside within a commutable distance of Philadelphia, PA in order to work onsite as required.
Responsibilities Include:
- Design, develop, and maintain middle-tier services and backend components using C# and .NET technologies.
- Apply SOLID principles and clean architecture practices in application design.
- Build robust APIs and business logic layers to support web and enterprise applications.
- Collaborate with front-end developers, architects, and DevOps teams to deliver integrated solutions.
- Design, develop, optimize, and maintain relational databases (Oracle preferred).
- Write efficient stored procedures, views, functions, and complex queries.
- Optimize database performance, indexing strategies, and query tuning.
- Participate in code reviews and enforce best practices for clean, maintainable code.
- Troubleshoot and resolve production issues related to application logic and data layers.
- Contribute to architectural decisions and technical design discussions.
- Document technical designs and implementation details.
Required Skills, Qualifications and Experience:
- BA/BS in technical discipline.
- 10 years of experience in middle-tier and database development.
- Experience in applying SOLID principles and object-oriented design patterns.
- Strong proficiency in C# and .NET (.NET Core/.NET 6+) and ASP.NET Web API.
- Experience designing and building RESTful APIs and middle-tier services.
- Experience with ORM frameworks (Entity Framework preferred, Dapper).
- Strong SQL skills and experience with relational databases (Oracle preferred, SQL Server, PostgreSQL).
- Experience writing and optimizing complex queries and stored procedures.
- Strong understanding of data modeling and database design principles.
- Experience with version control systems (TFVC and Git).
- Strong problem-solving skills and attention to detail.
- Must be a United States citizen with a DoD Secret clearance or ability to obtain a favorably adjudicated T3 investigation.
Preferred Qualifications:
- Experience with microservices architecture
- Experience with CI/CD pipelines and DevOps best practices
- Experience with cloud platforms (Azure preferred)
- Experience with caching strategies (Redis, in-memory caching)
- Experience with performance profiling and monitoring tools
- Experience with containerization (Docker, Kubernetes)
- Experience with automated testing frameworks
Work Environment and Physical Demand:
- Must be able to work for extended periods of time at a computer.
Compensation: $115,000+
At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.
- 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
- Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
- 401(k) with Match: We match 3% of your contributions with immediate vesting.
- Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
- Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
- Parental Leave: 15 days of fully paid leave for new parents, because family matters.
- Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
- Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
- Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
At AGE, you'll do work that matters, supported by a company that delivers for its people.
Not Specified
S
Electrical Engineer II
Salary not disclosed
Job Title: Engineer, Electrical II
Location: Carrollton, GA, Georgia, U.S
Direct Hire/Permanent role
A leader in technology and innovation, the client is one of North America's largest wire and cable producers. Client and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products, and engineered products. In addition, the client supplies assembled products, contractor equipment, electrical components, hand tools, and jobsite power and lighting solutions. The company also offers digital solutions, including contractor planning and utility grid resiliency, as well as field services, including cable testing, rejuvenation, and replacement,t to support our customers as a value-add partner. We are proud to offer competitive compensation, employee benefits, tuition reimbursement, and unlimited growth opportunities. Our more than seven decades of progressive growth can be attributed to our determination to develop innovative systems and solutions, exercising environmental stewardship, and enhancing the well-being of the communities in which we work and live. How will you power what's possible?
Job Summary/Objective:
Under the direction of the Manager of Engineering, the Electrical Engineer II troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns.
Key Responsibilities:
Education, Experience, Skills
Required:
Minimum Education Level: Bachelor's
Specialized Degree: Electrical Engineering Degree
Years of Experience: 3+ Years
Field of Expertise: Mechanical or Electrical Engineering in a Manufacturing Environment
Preferred:
Certificates: PMP
Preferred Field of Expertise: Prior Experience in a Rod Mill or Foundry
Other Preferred Skills, Licenses, and Certificates:
Competencies
Benefits We Offer:
The client is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.
Location: Carrollton, GA, Georgia, U.S
Direct Hire/Permanent role
A leader in technology and innovation, the client is one of North America's largest wire and cable producers. Client and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products, and engineered products. In addition, the client supplies assembled products, contractor equipment, electrical components, hand tools, and jobsite power and lighting solutions. The company also offers digital solutions, including contractor planning and utility grid resiliency, as well as field services, including cable testing, rejuvenation, and replacement,t to support our customers as a value-add partner. We are proud to offer competitive compensation, employee benefits, tuition reimbursement, and unlimited growth opportunities. Our more than seven decades of progressive growth can be attributed to our determination to develop innovative systems and solutions, exercising environmental stewardship, and enhancing the well-being of the communities in which we work and live. How will you power what's possible?
Job Summary/Objective:
Under the direction of the Manager of Engineering, the Electrical Engineer II troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns.
Key Responsibilities:
- Troubleshoots and resolves malfunctions to machine control systems and makes recommendations to improve efficiency or address quality concerns
- Experience and proficiency with ladder logic/PLC programming, Siemens experience required
- Develops new and modifies existing PLC and/or HMI applications, interfaces, or embedded control systems
- Participates in the set-up and commissioning of new systems or the upgrading of current systems
- Knowledge of AC and DC circuitry and electrical concepts
- Versatile in ladder logic and various PLC programming languages. Working knowledge of field control devices (motors, relays, switches, photoeyes, etc.)
- Designs, develops, maintains, and modifies instrumentation and control systems
- Start to finish electrical control system hardware design experience (control panel and field wiring)
- Competency in Electrical CAD
- Ability to work independently as well as in a team environment
Education, Experience, Skills
Required:
Minimum Education Level: Bachelor's
Specialized Degree: Electrical Engineering Degree
Years of Experience: 3+ Years
Field of Expertise: Mechanical or Electrical Engineering in a Manufacturing Environment
Preferred:
Certificates: PMP
Preferred Field of Expertise: Prior Experience in a Rod Mill or Foundry
Other Preferred Skills, Licenses, and Certificates:
- Working knowledge of power distribution, networks, PLC, HMI, and drive hardware and software
- Ability to read and create schematic drawings using AutoCAD software
- Must be able to communicate effectively with Operators, Technicians, Management,a nd others
- Ability to work independently as well as in a team environment
- Must possess a sense of urgency and ownership when working within time constraints
- Must have strong computer skills and be proficient in Microsoft Word and Excel
Competencies
- Action Oriented
- Balances Stakeholders
- Collaborates
- Customer Focus
- Nimble Learning
- Plans and Aligns
Benefits We Offer:
- 401k with Matching
- Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
- Paid Time Off & Paid Holidays
- Long & Short-Term Disability
- Supplemental Insurance Plans
- Employee Assistance Program
- Employee Referral Program
- Tuition Reimbursement Programs
- Advancement & Professional Growth opportunities
- Parental Leave
- & More
The client is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.
Not Specified
jobs by
✓ All jobs loaded