Logic Gates Jobs in Usa

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Tool allowance included to support your trade.

Our Diesel Mechanics start at $32.00/ hour

• 401K with 2% automatic company contribution plus company match up to an additional 6%.

• Medical Benefits Start Day One!

• We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.

• Paid vacation time, sick, and personal time.

• Employee uniforms provided.

• Strong Safety Culture, newer equipment, and excellent local leadership.

Schedule:

Sunday - Thursday - 8 PM - 4:30 AM

Location - Woodburn, OR

ESSENTIAL DUTIES AND RESPONSIBILITIES  

• Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.).

• Perform preventative maintenance within DOT standards.

• Receive road calls, assign third party vendor, and work with business partners on plan of action.

• Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines.

• Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.

• Backup to other maintenance shop personnel.

• Willingness and capacity to assume increased responsibility and certificates.

• Other duties as assigned by manager.

SUPERVISION:

• N/A

RELATIONSHIPS

• Internal: All Fleet Technicians, Drivers, Coordinators and Manager

• External: Vendor service providers when required

WORK ENVIRONMENT

• Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.

• Must be willing to work in extreme temperatures and weather conditions.

MINIMUM QUALIFICATIONS

• Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.

• Diagnostic and troubleshooting competency relating to equipment repairs.

• Successfully demonstrated independent analytical and problem-solving skills.

• Prior experience in administering appropriate PM program.

• Must furnish own personal hand tools.

• Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide).

EDUCATION

• High school diploma or equivalent required.

CERTIFICATIONS/TRAINING

• N/A

LICENSES

• Must possess a valid driver's license.

PREFERRED QUALIFICATIONS

• Valid Class-A CDL license and DOT certification

• Experience using fleet maintenance software

• Welding ability

PHYSICAL QUALIFICATIONS

OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER

JOB REQUIRES WORKER TO:

FREQUENCY:

STAND: CONTINUOUSLY

WALK: CONTINUOUSLY

DRIVE VEHICLE: FREQUENTLY

SIT: FREQUENTLY

LIFT

1-10 lbs (Sedentary): FREQUENTLY

11-20 lbs (Light): FREQUENTLY

21-50 lbs (Medium): FREQUENTLY

51-100 lbs (Heavy): FREQUENTLY

Over 100 lbs (Very Heavy): OCCASIONALLY

CARRY

1-10 lbs (Sedentary): FREQUENTLY

11-20 lbs (Light): FREQUENTLY

21-50 lbs (Medium): FREQUENTLY

51-100 lbs (Heavy): OCCASIONALLY

Over 100 lbs (Very Heavy): OCCASIONALLY

PUSH/PULL 1: FREQUENTLY

CLIMB/BALANCE 2: FREQUENTLY

STOOP/SQUAT: FREQUENTLY

KNEEL: FREQUENTLY

BEND: FREQUENTLY

REACH ABOVE SHOULDER: FREQUENTLY

TWIST: FREQUENTLY

GRASP OBJECTS 3: FREQUENTLY

MANIPULATE OBJECTS 4: FREQUENTLY

MANUAL DEXTERITY 5: FREQUENTLY

1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)

2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)

3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)

4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)

5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law.  The expected base rate for this role is $32 per hour.

This role will also receive overtime compensation

​Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

JOIN OUR FLEET TEAM!

Tool allowance included to support your trade.

Our Diesel Mechanics start at $39.00/ hour!

• 401K with 2% automatic company contribution plus company match up to an additional 6%.

• Medical Benefits Start Day One!

• We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage.

• Paid vacation time, sick, and personal time.

• Employee uniforms provided.

• Strong Safety Culture, newer equipment, and excellent local leadership.

Schedule:

Wednesday – Saturday 12:00 am – 10:30 AM

Location:

Woodburn, OR

ESSENTIAL DUTIES AND RESPONSIBILITIES  

• Independently troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).

• Perform preventative maintenance within DOT standards.

• Mentor other maintenance shop personnel.

• Receive road calls, assign third party vendor, and work with business partners to triage appropriate plan of action including equipment swaps etc.

• Utilize fleet maintenance software system tablet to fully document equipment repair and parts used.

• Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.

• Other duties as assigned by manager.

SUPERVISION:

• N/A

RELATIONSHIPS

• Internal: All Fleet Technicians, Drivers, Coordinators and Manager

• External: Dealer Service Managers

WORK ENVIRONMENT

• Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility.

MINIMUM QUALIFICATIONS

• Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic.

• Diagnostic and troubleshooting ability using fleet maintenance software.

• Successfully demonstrated independent analytical and problem-solving skills.

• Must furnish own personal hand tools.

• Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.

• Ability to read and understand technical and service manuals.

• Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.

• Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.

• Ability to adapt to changing organizational and operational needs.

• Computer and software experience.

EDUCATION

• High school diploma or equivalent required.

CERTIFICATIONS/TRAINING

• Brake certification

LICENSES

• Must possess a valid driver's license.

PREFERRED QUALIFICATIONS

• JPRO software experience.

• Welding ability

• Knowledge with electrical schematics

• Basic Microsoft Excel and Word skills.

• Leadership experience or qualifications

• Valid Class A CDL license and DOT certification

• EPA 608 (Type 2 or Universal) certification

PHYSICAL QUALIFICATIONS

OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER

JOB REQUIRES WORKER TO:

FREQUENCY:

STAND: CONTINUOUSLY

WALK: CONTINUOUSLY

DRIVE VEHICLE: FREQUENTLY

SIT: FREQUENTLY

LIFT

1-10 lbs (Sedentary): FREQUENTLY

11-20 lbs (Light): FREQUENTLY

21-50 lbs (Medium): FREQUENTLY

51-100 lbs (Heavy): FREQUENTLY

Over 100 lbs (Very Heavy): OCCASIONALLY

CARRY

1-10 lbs (Sedentary): FREQUENTLY

11-20 lbs (Light): FREQUENTLY

21-50 lbs (Medium): FREQUENTLY

51-100 lbs (Heavy): FREQUENTLY

Over 100 lbs (Very Heavy): FREQUENTLY

PUSH/PULL 1: FREQUENTLY

CLIMB/BALANCE 2: FREQUENTLY

STOOP/SQUAT: FREQUENTLY

KNEEL: FREQUENTLY

BEND: FREQUENTLY

REACH ABOVE SHOULDER: FREQUENTLY

TWIST: FREQUENTLY

GRASP OBJECTS 3: FREQUENTLY

MANIPULATE OBJECTS 4: FREQUENTLY

MANUAL DEXTERITY 5: FREQUENTLY

1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)

2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)

3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)

4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)

5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law.  The expected base rate for this role is $39 per hour.

This role will also receive overtime compensation

​Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job Title: Administrative Assistant (Ongoing Contract)

Location: Near South Gate, CA (Onsite)

Pay Rate: $$24-25/hr

Contract Type: Ongoing Contract

Overview:

Our client near South Gate, CA is seeking a detail‑oriented Administrative Coordinator to support quality control operations. This role is ideal for someone who thrives in a structured environment, enjoys documentation work, and can manage multiple administrative tasks with accuracy. You will work closely with the Manager to ensure proper tracking, organization, and communication of project-related documentation.

Key Responsibilities:

• Scan and organize work order tickets

• Update and maintain internal logs with accuracy and consistency

• Support preparation of agendas for owner’s meetings

• Attend owner’s meetings to take detailed notes

• Draft and issue formal meeting minutes to all relevant parties

• Maintain organized digital filing systems for project documents

• Assist the team with general administrative tasks as needed

Qualifications:

• Prior administrative or document-control experience preferred

• Strong attention to detail, organization, and accuracy

• Ability to work onsite and collaborate with cross-functional teams

• Proficiency with scanning tools, digital filing systems, and basic office software (Outlook, Excel, Word)

• Strong written communication skills and comfort preparing professional documentation

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

ACCOUNT EXECUTIVE

Pay: $100,000.00 - $400,000.00 per year

Job description:

Gold Gate Capital is excited to add new talent to our roster! Endorsed by Wayne Allyn Root and we

advertise on TV with Fox news to name a few. Seeking a self-motivated and ambitious Account

Executive able to manage and oversee relationships with clients. The candidate must be experienced in sales. Our account executives get NEW leads EVERYDAY and get access to hundreds of thousands of leads that contacted us regarding buying physical gold and silver! We provide our team with the best leads in the industry and a custom CRM that makes your day as efficient as possible..

Our Top AE of the month (Jon) made $82K in commissions recently!

Responsibilities:

● Analytical skills to assess market trends and adjust strategies accordingly

● Identify new business opportunities through phone sales/lead generation.

● Conduct market research to understand industry trends and customer needs.

● Collaborate with the sales management team to strategize on sales initiatives.

● Provide ongoing support to clients, addressing any inquiries or issues that arise.

● Track and report on sales performance metrics to ensure goals are met.

Experience

● Sales - Strong negotiation skills with a track record of closing deals successfully.

● Excellent ability to build rapport with clients.

● Ability to work independently as well as part of a team in a fast-paced environment.

● Proficiency in using CRM software and other relevant tools for managing accounts effectively.

● Experience in Precious Metals IRA sales (plus)

Job Type: Full-time

Benefits:

● 401(k)

● Dental insurance

● Health insurance

Summary

The Materials Supervisor plans, organizes and monitors the Production supplier parts including Supplier onboarding, Contract set up (PO), releases, receiving, inventory management, storage and distribution of all items, ensuring a smooth and consistent operation so parts and supplies are located and distributed to proper departments in an effective, efficient and safe manner as required to satisfy internal and external customer requirements.

Core Competencies

• Communication
• Energy and Stress
• Team Work
• Time Management
• Creative and Innovative Thinking
• Problem Solving
• Accountability and Dependability
• Research and Analysis
• Decision Making and Judgement
• Planning and Organizing
• Ethics and Integrity
• Mathematical Reasoning
• Coaching and Mentoring
• Conflict Management
• Inventory Management
• Customer Focus (Internal & External)

Job Duties

• Ensure that the materials department is in compliance with all applicable health and safety regulations and other company-related policies and procedures.
• Responsible for supervisory responsibilities in accordance with the organization's policies and applicable legislation.
• Supervise production suppliers with Materials Coordinators including planning all incoming raw materials, purchased components, packaging, sub-suppliers and Outside Services to support manufacturing and shipping requirements.
• Supervise and train Materials Coordinators.
• Coordinate all incoming logistics planning to ensure efficiency of manpower and floor space.
• Supervise inventory system and all inputs/outputs – lead as expert in the field, working with cross-departmental teams and the CMS System to troubleshoot inventory discrepancies, determine root causes, corrective actions and monitor inventory accuracy.
• Supervise all receiving activity, including training hourly employees as required, ensure CMS database accuracy.
• Develop and maintain cycle count schedule.
• Lead and coordinate the year-end inventory count.
• Key member of APQP team to support launch of new programs; engineering changes and/or volume changes.
• Lead for onboarding and setting up new vendors.
• Lead for setting up new production items, ensure all documentation is in place, maintaining all blanket Purchase orders, in CMS database. Work with Corporate purchasing to review and analyze submitted quotations, understand costing, negotiate with vendors.
• Lead for PFEP (Plan for every part), reporting to Manager on measured targets.
• Reporting on Monthly MP&L Key Targets, as assigned.
• General knowledge of PPAP, IATF, MMOG, ISO14001, SDS, CTPAT and Health & Safety requirements.
• Lead floor plan layout planning for all purchased and manufactured items including current and future mapping and coordination of changes.
• Lead to develop FIFO plan and tracking.
• Coordinate outbound shipments as required related to vendors/production.
• Track monthly supplier performance and report to Manager / summarize for month end reporting.
• Coordinate with the Accounting Department on resolving invoicing discrepancies.
• Coordinate with the Quality Department on supplier issues to protect production.
• Coordinate with Packaging Engineers as a liaison with suppliers for cost savings and continuous improvements projects.
• Perform Health and Safety inspections, as required.
• Keep up to date with system changes and training requirements related to job duties.
• Be on-call by cell phone after daytime office/shop hours.
• Ensures facility compliance with the Flex-N-Gate Materials Management Policy.
• Performs all other tasks as assigned by management.

Requirements

• B.S. or B.A. degree in business management, materials management or related field.
• Minimum five (5) years of experience in warehousing, receiving, shipping, inventory control or materials management in a manufacturing environment with 2 years of supervisory experience.
• Knowledge of environmental, health and safety regulations.
• Experience with ERP systems, specifically MRP modules.
• Strong PC experience; MS Excel - spreadsheets, charts, graphs, MS Word, MS PowerPoint- presentations, and systems applicable to work area (CMS, SpinFire, etc.)
• Knowledge of Import/Export Regulations.
• Knowledge of Basic Supply Chain Management to include master planning of resources, detailed scheduling and planning, and execution and control of operations.
• Good analytical and problem-solving skills.
• Excellent planning and organizational skills.

About Us:

At Logic Executive Search and Workplace Solutions we strive to be a valued, strategic business partner providing the highest level of executive recruitment expertise and customized workplace strategies.

The Opportunity:

Our client is a large-scale manufacturing organization (non-automotive), that is looking to add a Senior Environmental, Health & Safety Specialist to join their team in Reno, Nevada. The Senior EHS Specialist plays a critical role in supporting local site leadership by strengthening health and safety culture, enhancing risk management practices, and advancing environmental stewardship.

Position Availability:

• This posting is for a vacancy within the organization

What’s In It For You?

• Competitive Base Salary
• Comprehensive Benefits Package
• 401(k) Available
• Tuition Reimbursements Available
• Opportunity to work for a continuously growing organization

What You’ll Be Responsible For:

• Develop, implement, and maintain EHS Management System standards, and ensure compliance with all EHS programs and initiatives.
• Lead interactions with safety regulatory agencies and environmental regulatory agencies.
• Provide guidance on hazardous and non‑hazardous waste management programs.
• Maintain and oversee the facility’s emergency response program, including life safety systems, equipment, and required documentation.
• Manage SDS reviews, audits, and documentation to ensure regulatory compliance.
• Engage with operations and engineering teams to assess risks associated with machine guarding, ergonomics, and chemical use for new or modified equipment.
• Conduct ergonomic assessments and maintain the ergonomic risk assessment database.
• Perform incident investigations, identify root causes, and recommend practical corrective actions.
• Lead or participate in continuous EHS improvement opportunities.
• Support the development and achievement of EHS key performance indicators.
• Develop and deliver EHS training programs and document training compliance.
• Prepare internal and external health, safety, and environmental reports.
• Manage data entry and reporting in EHS software systems, including incidents, risk assessments, inspections, and corrective actions.
• Provide expert consultation to leadership, employees, visitors, and contractors regarding EHS requirements and risks.
• Assist with the creation, review, and maintenance of EHS‑related Standard Operating Procedures (SOPs).

The Ideal Candidate:

• Post‑secondary diploma or degree in health, safety, environmental studies, or other related disciplines.
• Professional certifications such as CSP (Certified Safety Professional) or CIH (Certified Industrial Hygienist) is strongly preferred.
• 5 – 7 years of experience developing and managing EHS programs in a manufacturing environment or other related industry.
• Experience with EHS management systems, auditing programs, risk assessments, and incident investigations.
• Demonstrated ability to prepare comprehensive written reports and present clear recommendations.

Complimentary Experience:

• High level of professionalism, integrity, and ethical conduct.
• Strong interpersonal skills with the ability to engage diverse stakeholders.
• Excellent verbal and written communication skills.
• Ability to manage multiple priorities and meet deadlines.
• Strong analytical skills and comfort working with software and data.
• Knowledge of applicable federal and state EHS laws and standards.

Logic Executive Search and Workplace Solutions is dedicated to supporting opportunities that reflect the diversity of the communities we serve. We value diverse perspectives and experiences, and encourage individuals from all backgrounds to apply, including those who may not meet every requirement listed.

If you are interested in applying for this position, please forward a copy of your resume to . We thank all those who apply for this role, however, only those selected for an interview will be contacted.

Logic Executive Search and Workplace Solutions is committed to providing accessible employment practices that follow the Accessibility for Ontarians with Disabilities Act and the Ontario Human Rights Code. Should you require accommodation during any phase of the recruitment process, please let our recruitment team know.

This recruitment process may use automated or AI-supported tools to assist with candidate screening and evaluation.

Lightwave Logic: (Nasdaq: LWLG) is a publicly traded materials and device development company that is conducting cutting-edge work to commercialize its proprietary organic nonlinear polymers for a variety of electro-optic devices and pushing the state of the art in high-speed fiber-optic telecom and data communications. Our development roadmap is geared to disrupt the industry by introducing organic modulators and related photonic integrated circuits that have superior speed, lower power consumption, and smaller size than current technologies. Our materials and devices are extendable into other applications, including sensors and instrumentation.

Job Description

We are seeking a Process Chemist to join our team in Englewood, CO. The Process Chemist designs, develops, optimizes, and scales chemical processes for the pilot to large-scale manufacturing of intermediate and finished products. The Process Chemist leverages their expertise in ensuring that chemical processes are developed so that the chemical reaction(s) is carried out efficiently, safely, and economically, and are within quality and regulatory compliance. By staying current with scientific literature and collaborating across teams, they drive innovation and efficiency. This role involves supporting IP development, maintaining safety standards, and contributing significantly to the team's success in achieving company goals.

Responsibilities

• Designing, developing, and optimizing chemical processes to improve efficiency, yield, and product quality.
• Conducts laboratory experiments to understand chemical reactions and improve process conditions.
• Ensure that chemical processes comply with regulatory requirements and safety standards.
• Conduct small, pilot, or large-scale manufacturing of intermediates and/or finished products.
• Write/execute technical reports, standard operating procedures, and batch records.
• Ability to work second shift, when needed.
• Remain current on relevant scientific literature.
• Work collaboratively with colleagues across the company; use this collaboration to support the company's goals and improve the chemistry team's output.
• Punctually and thoroughly record all work and data in e-notebook, as well as summarize and report ongoing work to the group regularly.
• Exhibit safety awareness, safe work practices, and common laboratory hygiene, and ensure that all members of the chemistry team abide by the safety policies of the company.
• Other duties and projects as assigned.

Qualifications

• BS/MS in chemistry, chemical engineering, or a related discipline.
• 1-3 years’ experience with process development, process optimization, and/or scale-up.
• An understanding and/or familiarity with regulatory compliance in chemical manufacturing.
• Knowledgeable in chemical reaction mechanisms, kinetics, and environmental health and safety practices.
• Ability to use analytical instrumentation (HPLC, GC-MS, DSC, pH meter, etc).
• Ability to operate pilot to large-scale chemistry equipment (chemical reactors, pumps, distillation equipment, etc).
• Strong analytical and troubleshooting skills.
• Ability to conduct literature searches for specific target molecules and reactions; ability to use the literature to design efficient synthetic routes, as well as troubleshoot problematic reactions.
• Thorough understanding of modern analytical and spectroscopic techniques and ability to interpret the corresponding data and spectra.
• Quality-first mindset, which leads to the production of highly pure final products.
• Ability to work independently and efficiently, as well as work across and within groups to support the goals of the company.
• Ability to organize work efficiently, carry out multiple operations in parallel, and successfully complete projects in a timely fashion.
• Excellent written and oral communication skills.

Compensation

The salary range for this role is $75,000-$90,000.

Benefits

LightwaveLogic offers a highly competitive compensation package including stock options, as well as comprehensive benefits including fully paid medical, dental, and vision insurance coverage (employee and family). a generous PTO policy, $500/year(prorated) company contribution to your medical FSA, and a 401K (safeharbor, 4% match).

EEO Statement

Lightwave Logic is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Lightwave Logic: (Nasdaq: LWLG) is a publicly traded materials and device development company that is conducting cutting-edge work to commercialize its proprietary organic nonlinear polymers for a variety of electro-optic devices and pushing the state of the art in high-speed fiber-optic telecom and data communications. Our development roadmap is geared to disrupt the industry by introducing organic modulators and related photonic integrated circuits that have superior speed, lower power consumption, and smaller size than current technologies. Our materials and devices are extendable into other applications, including sensors and instrumentation.

Overview

The Fabrication Process Engineer is essential in the development, optimization, and implementation of processes for fabricating nanoscale electro-optic devices using techniques like physical vapor deposition, electro-optic polymer coating, atomic layer deposition (ALD), photolithography, and reactive ion etching within a cleanroom environment. This role involves formulating polymer solutions, performing precise photolithography, characterizing nanostructures, and maintaining advanced fabrication tools. The engineer will collaborate with cross-functional teams to enhance processes while ensuring adherence to safety and cleanroom protocols, making significant contributions to the advancement of electro-optic technology.

Responsibilities

• Formulate the electro-optic polymer solutions and spin coat it on devices followed by a baking procedure.
• Perform photolithography to pattern hard masks including metals, dielectrics, semiconductors and polymer films for etching.
• Characterize etched nanostructure and devices, measure dimensions and roughness and interpret the results obtained by scanning electron microscope (SEM), atomic force microscopy (AFM), focused ion beam (FIB) etching and SEM, (FIB-SEM), spectroscopic ellipsometry (SE), stylus and 3D optical profilers and optical microscopes.
• Operate, maintain and troubleshoot fabrication tools such as maskless aligner (MLA), inductively coupled plasma – reactive ion etching (ICP-RIE) systems.
• Develop etching processes on bare silicon, thermal and CVD oxides for nanostructure fabrication.
• Optimize etching parameters by design of experiment (DOE) to improve the selectivity, uniformity and etched surface roughness of etching process.
• Deposit metals, dielectrics, and semiconductors by E-beam evaporator and plasma sputtering.
• Develop and optimize atomic layer deposition (ALD) techniques for dielectrics (such as metal oxides) and conductive materials.
• Document work in detail and keep process travelers updated.
• Work collaboratively with team members and leaders in all areas of the company.
• Exhibit safety awareness, safe work practices, laboratory hygiene and cleanroom protocol compliance.
• Other duties or projects as assigned.

Qualifications

• Bachelor’s degree (minimum) or Master’s degree (preferred) in chemical engineering, electrical engineering, material science, applied science, or a related discipline.
• Prior experience operating a variety of laboratory and clean room tools and instrumentation, including spin coaters, PVD deposition tools, ALD deposition tools, mask aligners, advanced maskless aligner (MLA) tools, reactive ion etchers, and wet bench photoresist development.
• A strong understanding of the fundamentals of semiconductor fabrication processes, with a focus on etch, deposition, and lithography (e-beam and DUV) processes
• Hands-on experience in the operation, maintenance, and troubleshooting of inductively coupled plasma – reactive ion etching (ICP-RIE) systems, as well as optimization of atomic layer deposition (ALD) techniques for dielectrics (such as metal oxides) and conductive materials.
• Excellent written and oral communication skills.

Preferred Qualifications

• Silicon Photonics design, manufacture, test, Electro-optic device test, and Electro-optic polymer experience.
• experience in the fabrication of semiconductors or photonic devices in cleanroom. Optical device fabrication background a plus.
• High Volume Manufacturing experience and experience in process development to HVM transfer.
• Thin film characterization experience a plus (e.g., microscopes, profilometers, SEM, AFM, etc.).

Compensation

The salary range for this role is $95,000- $115,000

Benefits

LightwaveLogic offers a highly competitive compensation package including stock options, as well as comprehensive benefits including fully paid medical, dental, and vision insurance coverage (employee and family). a generous PTO policy, $500/year(prorated) company contribution to your medical FSA, and a 401K (safeharbor, 4% match).

EEO Statement

Lightwave Logic is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

• Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
• Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
• Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
• Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
• Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
• Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
• Drive the development of system-level simulations and digital twins to validate control strategies before deployment
• Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
• Establish design patterns and best practices for modular and reusable control logic across projects
• Lead root cause analysis and resolution of complex control system issues during commissioning and operations
• Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
• Develop and maintain documentation for system architecture, control logic, and operational procedures
• Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
• Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
• Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
• Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

• Bachelor's Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

• 8+ years pf experience in control system design and implementation
• Deep expertise in the following:
  • PLC programming (Allen-Bradley, Siemens, Schneider Electric)
  • Building Management Systems (BMS) integration and optimization
  • Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
  • Automatic Transfer Switches (ATS) control and failover logic
• Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
• Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
• Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail
• Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
• Experience with hyperscale or colocation data center environments
• Familiarity with low and medium-voltage systems

Preferred Qualifications:

• Master's Degree in Electrical Engineering or a relevant engineering discipline
• Active Professional Engineer (PE) license
• Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
• Experience with digital twin modeling and predictive maintenance strategies.