Lifepoints Panel Jobs in Usa

UofL Health, Frazier Rehabilitation Hospital - Brownsboro

UofL Health and Lifepoint Rehabilitation have announced a joint venture to build and operate an inpatient rehabilitation hospital in Louisville, Kentucky.

This new 40-bed inpatient rehabilitation hospital will be located at 5000 Chamberlain Lane, near the intersection of I-71 and I-265 in the northeast area of Jefferson County, and will serve the growing East End of Jefferson County and adjacent counties. The approximately 55,000-square-foot, two-story rehabilitation facility will have all private rooms and focus on acute rehabilitation for patients who suffer from stroke, traumatic brain injury, spinal cord injury, complex neurological disorders, orthopedic conditions, multiple trauma, amputation and other injuries or disorders. Large multidisciplinary therapy gymnasiums will be outfitted with the latest therapeutic technologies, including augmented reality balance training, therapy bionics and a full body exoskeleton. The hospital will also include a therapeutic courtyard with exterior amenities.

UofL Health - Frazier Rehab Institute is recognized nationally as an innovator in rehab care. For more than six decades, patients from across the world have sought out Frazier Rehab for life-enhancing treatments and therapies. The new facility is expected to help manage the growing needs of the region and will free up access to the array of specialty programs at its downtown location with one common goal - helping people of all ages with disabilities reach their fullest potential in physical and cognitive functioning.

Job Summary:

Assist nursing staff with patients' personal care, emotional support, and activities of daily living. More complex duties performed under supervision of licensed nursing personnel.

Essential Functions:

• Performs patient care responsibilities considering needs specific to the standard of care for patient's age.
• Provides morning care which may include bed bath, shower or whirlpool, oral hygiene, combing hair, back care, changing bed linens, cleaning over bed table and bedside stand, straightening room and other general care as necessary throughout the day.
• Provides evening care which includes hands/face washing as needed, oral hygiene, back rubs, peri-care, freshening linen, cleaning over bed tables, straightening room and other general care as needed.
• Notifies appropriate licensed personnel when patient complains of pain.
• Prepares patients for meals; serves and removes food trays and assists with meals or feeds patients if necessary.
• Distributes drinking water and other nourishments to patients.
• Answers patient call lights, anticipates patient's needs and makes rounds to assigned patients.
• Assists patients with the handling of personal property: dentures, glasses, contact lenses, hearing aids, prosthetic devices, etc.
• Performs all aspects of patient care in an environment that optimizes patient safety and reduces the likelihood of medical/health care errors.
• Transports patients to and from various departments in the hospital.
• Reports and, when appropriate, records any changes observed in condition or behavior of patients and unusual incidents.
• Assists in the preparation of admissions, transfers and discharge of patients.
• Assists licensed nursing staff with treatment procedures.
• Demonstrates ability to revise plan of care as indicated by the patient's response to treatment and evaluate overall plan daily for effectiveness.
• Integrates the plan of care with Rehabilitation Services treatment plan to attain patient's optimal level of functioning.
• Provides general nursing care: positioning patients, lifting and turning patients, applying/utilizing special equipment, assisting patients with the bedpan, commode; assists ambulating patients. Uses correct body mechanics.
• Checks patient for reddened areas or skin breakdown and reports to licensed nursing staff.
• Obtains and records temperature, pulse, respirations, blood pressure, weight, intake and output.
• Makes rounds with oncoming shift to ensure the unit is left in good condition.
• Maintains a good working relationship both within the department and with other departments.
• Communicates appropriately and clearly to nurse, supervisor, co-workers, physicians and the Rehabilitation Services staff.
• Consults other departments, as appropriate, to provide for an interdisciplinary approach to the patient's needs.
• Demonstrates an ability to be flexible, organized and function under stressful situations.
• Treats patients and their families with respect and dignity; ensures patient confidentiality.
• Practices careful, efficient and non-wasteful use of supplies and linens and follows established charge procedures for patient charge items.
• Follows infection control procedures. Keeps the unit clean and organized.
• Meets current documentation standards and policies.
• Manages and operates equipment safely and correctly.
• Response to the patient is appropriate in emergency or physically distressful situation.
• Performs other duties as assigned within the nurse assistant's scope of practice.
• Other duties as assigned

C.N.A., CNA, PCT

Qualifications:

• Completion of course for nursing assistants
• Current state certification as a Nursing Assistant
• CPR/BCLS Certification
• Minimum six months experience in an acute or long term facility preferred.
• Excellent oral and written communication and interpersonal skills.

BC/BE OBGYN Needed Near Ridgeway, VA A well established practice is seeking a BC/BE OBGYN to join one other in a successful, established practice.

Serving beautiful Southern Virginia in an affordable, family-friendly community, this hospital-employed position enjoys the support of a strong physician services team and a committed administration.

The facility is a regional health system located in Southern Virginia near the North Carolina border, near Greensboro NC, Roanoke VA and within an easy drive of the Raleigh/Durham Research Triangle area.

The facility is a proud LifePoint Health facility Recruitment Package may include:
- Base salary + wRVU production incentive
- Quality bonus
- CME allowance
- Sign-on bonus
- Medical debt assistance
- Relocation allowance
- Residency stipend
- Health benefits + Retirement plan
- Marketing + practice growth assistance.

Enjoy working in a wonderful facility with good compensation and benefits.

If you are interested in hearing more about this opportunity, please call or text HDA MD Staff at .

You can also reach us through email at .

Please reference Job ID # j-15341.

BUILT TO CONNECT

Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world.

About The Position

Primarily responsible for creating electrical drawings and associated documents for retrofit control panel projects supporting asphalt plant automation systems. Works from field audit documentation to develop complete drawing packages for panel manufacturing. Collaborates with Project Engineers and manufacturing to ensure drawings meet project requirements and production needs.

Key Deliverables

Prepares detailed electrical control panel drawings including schematics, wiring diagrams, panel layouts, and I/O assignments

• Creates electrical bills of material and purchased parts lists from drawing packages
• Develops drawing packages from field audit documentation provided by Project Engineers
• Interacts with Project Engineers and manufacturing to confirm requirements and resolve design questions
• Coordinates with Procurement to ensure long lead time items are identified early
• Supports manufacturing with drawing clarifications during panel build

Key Activities & Responsibilities

• Create retrofit panel drawings using EPLAN, maintaining compatibility with legacy AutoCAD documentation
• Work within established drawing standards and templates
• Generate accurate BOMs from completed drawings
• Respond to drawing questions from Controls Center manufacturing team
• Document design decisions and maintain project drawing files
• Supports the project process by reviewing field audit documentation and attending project kickoff meetings to confirm design requirements
• Supports as necessary lending assistance in electrical and controls troubleshooting
• Collaborative electrical print checking
• Timely and accurate correction/resolution of drawing errors
• Engage in Continuous Improvement projects and activities as assigned

To be successful in this role, your experience and competencies are:

• Associates degree or a minimum of two years of equivalent knowledge/experience in electrical design or related field
• Experience with EPLAN required; AutoCAD experience preferred
• Knowledge of the National Electric Code and UL 508A panel requirements
• Ability to select proper components, size starters, breakers, wiring and conduit
• Ability to read electrical ladder diagrams and control schematics
• Knowledge of PLCs and industrial control system components
• Strong attention to detail and ability to work from field documentation
• Willingness to work overtime as needed to meet project deadlines

Supervisor and Leadership Expectations

• No supervisory responsibilities

Our Culture and Values

Employees that become part of Astec embody the values below throughout their work.

• Continuous devotion to meeting the needs of our customers
• Honesty and integrity in all aspects of business
• Respect for all individuals
• Preserving entrepreneurial spirit and innovation
• Safety, quality and productivity as means to ensure success

WORK ENVIRONMENT

Office Environment

While performing the duties of this job, the employee works primarily in an office environment using computer-based design tools. Duties include extended computer work, sitting or standing at a workstation. The employee may occasionally visit the Controls Center manufacturing facility to support panel builds or resolve drawing questions. When in the manufacturing area, the employee may be exposed to moving mechanical parts, tools and equipment, and moderate noise levels. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EQUAL OPPORTUNITY EMPLOYER

As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Company Overview

Headquartered in Bensalem, PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company.

EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Glass & Glazing, Slate & Cooper Roofing, and Waterproofing.

EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards.

Job Summary

We are seeking a motivated individual looking to join an exciting and diverse team. This is a tremendous opportunity for an individual who wants to join a specialty contractor that performs work on many of the largest construction projects in the Northeast. The candidate must have experience in exterior envelope construction. Responsible for project scheduling, material and subcontractor procurement, construction coordination, site logistics, project change management, and budget forecasts. Position also requires customer interaction at a very high level.

This position is onsite out of our Elizabeth, NJ location.

Job Responsibilities

• Manage all aspects of project execution including scheduling, procurement of materials and subcontractors, site logistics, construction coordination, change management, and budget forecasting.
• Oversee installation of various roofing systems, including single-ply membranes (EPDM, PVC, TPO), SBS, hot-modified systems, underground waterproofing, and air/vapor barriers (both liquid and sheet-applied).
• Supervise the construction of commercial, healthcare, and educational facilities across the Philadelphia region.
• Coordinate the installation of a variety of panel systems such as aluminum composite panels, insulated panels, single-skin corrugated panels, phenolic panels, and fiber cement panels.
• Manage project controls across all phases—Pre-Construction, Construction, and Close-out. Responsibilities include understanding scopes and contracts, liaising between the contract and management teams, and supervising administrative, operations, maintenance staff, and subcontractors.
• Prepare accurate cost forecasts, manage project submittals and schedules, maintain detailed communication records, respond promptly to emails, review supplier purchase orders, and attend weekly project meetings.

Requirements

• Bachelor’s Degree preferred.
• Five (5) years of construction management experience is desired.
• Strong and demonstrated attention to detail, accuracy and thoroughness.
• Ability to multi-task and take direction.
• Knowledge of Construction Industry
• Proficient in Excel, Word, Adobe

Benefits

• Paid time off
• Health insurance with medical, dental and vision
• 401K eligible after 2 months, company matching after one (1) year of employment
• Performance based merit increase
• Tuition Reimbursement Program
• Company wide events

This information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications.

EDA Contractors is an equal employment opportunity employer and is committed to a diverse workforce. EDA Contractors does not discriminate on the basis of race, color, religion, national origin, gender, gender identity or expression, sexual orientation, age, marital status, veteran status, disability status, or any other categories protected by applicable federal or state law. Here at EDA Contractors we strive to promote and sustain a culture of diversity, inclusion, and belonging every day.

For more information about EDA, please visit our website at only, recruiters please don’t contact any EDA employee about this job post. No phone calls or emails will be accepted.

• Bachelor’s degree in mechanical engineering
• Thorough knowledge of engineering design & development concepts of automotive BIW system .
• Experience in side body panel, Roof, Floor panel and other BIW components
• Very good proficiency in CATIA V5/V6
• Bachelor’s degree in Mechanical, Engineering.
• 3+ years of proven experience designing high-volume designs of BIW parts
• Development of outer skin panels (A-Surface) in collaboration with OEM Design Studio, Design Engineering, CAE, etc.
• Development of inner panels, reinforcements, brackets and other structural panel
• Ability to create and completion of Sheet metal parts e.g. brackets, Panels, etc
• Design of automotive component parts in CATIA V5. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Strong communication skills, both verbal and written, and capability to drive 10 people offshore team
• Actively engage with Automotive OEM design engineers to collaborate on design projects for trading off cost, mass, joining methods, formability, and performance.
• Interpret CAE simulation results and integrate recommendations into product design
• Strong working knowledge of Design for Manufacturing, including formability with GD&T and dimensional engineering.

Responsibilities

• Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive seating system and subsystem design and development
• Thorough knowledge of engineering design & development concepts of automotive Seating system
• Very good proficiency in CATIA V5/V6. Prepare and execute design release in the 3DExperience PLM system. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Experience in design of Seat and seat components e.g. Cushion Frame, Back frame, Headrest, seat plastic and recliners and track
• Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Seat parts.
• Knowledge and understanding of Tooling and manufacturing processes
• Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&T
• Ability to perform Complete Seat packaging study of seating components
• Working knowledge of regulatory and certification requirements for seating system
• Maintain and develop Design Validation Plans (DVP), and Design Failure Mode Analysis (DFMEA)
• Good knowledge of seating system and component manufacturing processes
• Ability to define seating comfort and define comfort target
• Actively engage with Automotive OEM / Tier-I design engineers to collaborate on design projects for trading off cost, mass, joining methods, molding and testing performance.
• Propose and promote design improvement approaches including cost reduction and design optimization
• Complete and release Seating system, sub-system and detail designs
• Interpret CAE simulation results and integrate recommendations into product design

• Collaborate with seating suppliers and support overall vehicle development milestones and prototype/production build events

• Must have ability to perform feasibility studies, Check A-class surface and define craftsman ship target.

• Meet project deliverables commitments and timelines

• Design of automotive component parts in CATIA V5/V6

• Strong communication skills, both verbal and written, and capability to drive offshore team.

Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works!

Role Overview

Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts.

The role will be the primary lead on specification and procurement of instrumentation related to

process control, process indication, and control system infrastructure.

This role reports to Company Electrical Engineering Manager.

Responsibilities

• Assist with the design and modification of new and existing process control and instrumentation systems.

• Specify both discrete, analog, and networked control solutions.

• Prepare specifications, design-bid documentation, and construction estimates.

• Review supplier designs against licensor requirements, code requirements, and customer

requirements.

• Develop instrumentation standards to ensure selection compliance across multiple facilities.

• Develop maintenance procedures for instrumentation and control systems.

• Develop inspection plans for instrumentation and control systems.

• Develop commissioning plans for projects and system upgrades as required.

• Make recommendations for additional equipment as necessary.

• Participate in the review of Management of Changes, PHA Action Requests, Construction

Information Requests, and Change Order Requests.

• Experience in continuous process manufacturing in all the following project phases:

documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards.

• Assist with local, state, and federal permitting applications.

• Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance

Testing (FAT) as required (~10%).

• Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC

panels, RIO panels, and other control panels.

• Assist with local, state, and federal permitting applications.

Education

• BS in Electrical Engineering or extensive documented experience in lieu of engineering degree.

Experience

• 10+ years previous experience developing PLC programs, using multiple vendor hardware, for

process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal.

• 7+ years designing electrical control, motor control and heater control panels.

• 7+ years’ experience using AutoCAD Electrical.

• 7+ years of field installation / construction experience

• Strong background and understanding of P&ID drawings.

• Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment &

Electrical construction best practices.

• Previous experience with PSM-covered facilities.

• Previous experience working with Management of Change (MOC) and Continuous process

Improvement programs.

• Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU,

Profibus / Profinet, etc.

• Industrial Power distribution systems to 480 VAC.

• Exposure to Medium Voltage power distribution (4160 VAC or higher).

Knowledge, skills, and abilities

• Self-starter with strong initiative.

• Entrepreneurial spirit and attitude.

• Ability to manage multiple projects on different timelines.

• Comfortable in a fast-paced, purpose-driven, collaborative environment.

• Experience working with multiple outside engineering groups.

• Demonstrate a strong desire to learn manufacturing processes.

Must be authorized to work in the USA without the need for sponsorship now or in the future.

Field Senior Foreman – Glazing & Metal Panels

Overview

We are seeking a skilled Field Senior Foreman to lead on-site glazing and metal panel projects. The ideal candidate combines hands-on construction experience with strong leadership, guiding crews to complete work safely, efficiently, and to high-quality standards. While experience in glazing or metal panels is preferred, candidates from other construction trades with field management experience are encouraged to apply.

Key Qualifications

• Hands-on experience leading construction crews in commercial projects
• Background in construction science, engineering, or a related field is preferred
• Prior roles as a senior foreman, project engineer, or junior superintendent are highly desirable
• Ability to read and follow shop drawings accurately
• Familiarity with Bluebeam, Excel, and other construction software; Power BI is a plus
• Strong written and verbal communication; Spanish-speaking is an advantage

Responsibilities

Safety & Compliance

• Maintain and enforce safety protocols, OSHA standards, and project-specific requirements
• Lead daily safety briefings, toolbox talks, and Job Hazard Analyses
• Ensure proper use of PPE, rigging, lifting, and material handling
• Address unsafe conditions immediately

Crew Leadership & Labor Management

• Oversee both permanent employees and temporary labor assigned to the site
• Assign daily tasks and crew sizes to meet production and scheduling goals
• Foster a professional and disciplined work environment

Project Execution & Quality

• Monitor labor performance, manage efficiency, and reduce rework or material waste
• Inspect work to ensure compliance with plans, specifications, and manufacturer standards
• Identify and correct deficiencies promptly

Coordination & Communication

• Serve as the primary point of contact for the field team on glazing/metal panel work
• Collaborate with project management, general contractors, and other trades to maintain workflow
• Communicate progress, issues, and changes effectively

Material & Equipment Oversight

• Verify material deliveries and ensure proper storage and handling
• Coordinate staging, sequencing, and correct use of lifts, tools, and equipment

Documentation & Reporting

• Maintain accurate daily reports, time tracking, and field notes
• Document safety, quality, or schedule issues and provide updates for project management

Mentoring & Accountability

• Train and guide crew members on proper installation techniques
• Set clear expectations for quality, productivity, and conduct
• Address performance issues and escalate as needed

Ideal Candidate

• Proven experience leading construction crews on commercial projects
• Strong knowledge of glazing and metal panel installation or related construction work
• Dedicated to quality, safety, and efficiency
• Capable of mentoring team members and driving project success

Reach out to for immediate consideration.