Lifepoints Panel Jobs in Usa

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

AGE Solutions is looking for a Sr. Cross Domain Solutions Support Specialist to join our team in support of an upcoming cybersecurity risk management and assessment program with our DoD customer. In this position, you will organize and manage DSAWG and CDTAB meetings, including scheduling, logistics, agendas, and minutes. You will also participate in and contribute to weekly, monthly, and quarterly working groups, boards, and panels to include CDTAB, DSAWG, Information Domain, and IRSMC board meetings.

Individuals in this role must be available to work on-site at Ft. Meade, MD for the majority of the workweek.

Responsibilities Include:

• 
  
• Coordinate with DISA stakeholders, ISSMs, and PMs to resolve non-compliance issues identified in the Cybersecurity Scorecard.
  
• Keep DISA senior leadership and cybersecurity stakeholders informed of all Cybersecurity Scorecard non-compliance findings.
  
• Serve as the primary briefer for CDS requests, tickets, ad-hoc meetings, and annual reviews at CDTAB, DSAWG, Information Domain, and IRSMC boards.
  
• Apply broad technical expertise in cybersecurity, networking, system architecture, cross-domain technologies, DMZ design, and controlled interfaces.
  
• Participate in and contribute to weekly, monthly, and quarterly working groups, boards, and panels.
  
• Support the CDTAB Chair and Secretariat on CDS-related issues and actions.
  
• Implement CDTAB strategic goals including policy planning, risk analysis, and vulnerability assessments.
  
• Identify and propose issues requiring CDTAB risk decisions and organize topics for monthly meetings.
  
• Execute DSAWG strategic goals and conduct risk and vulnerability assessments for related initiatives.
  
• Maintain DSAWG and CDTAB online platforms, ensuring access to briefings, policies, references, tracking tools, and contact directories.
  
• Notify the CDTAB community of all CDS tickets and requests pending review.
  
• Organize and manage DSAWG and CDTAB meetings, including scheduling, logistics, agendas, and minutes.
  
• Communicate deadlines for submission of agendas, briefs, and discussion topics.
  
• Draft, proof, and distribute meeting materials to DSAWG and CDTAB members in advance.
  
• Maintain standardized briefing templates and formats for both forums.
  
• Record and publish all meeting minutes, decisions, briefings, and supporting documents.
  
• Keep updated contact lists and email distribution groups for members and advisors.
  
• Develop monthly status reports (MSRs) for CDTAB and DSAWG.
  
• Prepare up to 10 SOPs or internal documents annually.
  
• Create up to 5 technical papers per year on DSAWG-related issues for coordination with DoD/IC stakeholders.
  
• Produce up to 12 white papers, CONOPS, and contingency plans annually to support RE4 functions.
  
• Manage monthly ballots for CDTAB and DSAWG, averaging 20 CDS requests, 20 tickets, 10-20 briefings, and 15 annual reviews-volume may vary monthly.
  

Requirements:

• 
  
• Bachelor's degree (IT-related field preferred)
  
• Six (6) or more years leading Risk Management teams
  
• Five (5) or more years IT program management experience leading audits and inspections in DoD/Federal environment
  
• Have an active DoD Top Secret clearance with SCI eligibility
  
• DoD 8570 IAM or IAT Level III certification
  
• Functional area expertise in National and DoD IT policy
  
• Expert level knowledge and experience as a technical expert providing technical direction, interpretation, and alternatives in areas such as but not limited to; Information Systems Architecture, Telecommunications Systems Design, Architecture, Implementation, Information Systems Integration, Software Development Methodologies, Security Engineering, Communications and Network Systems Management.
  
• Expert level knowledge in guiding the successful completion of major programs and may function in a project leadership role Proven ability to prepare and present technical documentation, strategic briefings, and governance materials for senior-level DoD boards (e.g., CDTAB, DSAWG, IRSMC)
  
• Excellent technical writing and communication skills with the ability to convey complex information clearly to technical and non-technical audiences
  
• Customer service skills
  

Compensation: $120,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

Description

Ready for more than just a job? Build a career with purpose.

At Lactalis in the USA, we're committed to providing meaningful opportunities for our people to learn, grow, and thrive-whether you're just starting your journey with us or looking to take the next step in your career. From day one, we offer the tools and support to help you succeed.

As the world leader in dairy, Lactalis is a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Each day, we're proud to produce award-winning dairy products that bring people together.

In the US, we proudly offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with a growing family of ethnic favorites like Karoun, Gopi, and Arz.

At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We foster a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued.

Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us shape the future of dairy.

From your PASSION to ours

Lactalis USA, part of the Lactalis family of companies, is currently hiring a Sensory Science Intern based in Buffalo, NY. Join our R&D team as a Sensory Science Intern, where you will play a hands-on role in evaluating the taste, texture, and consumer appeal of our products. This is a comprehensive 12-month, on-site opportunity located in Buffalo, NY, designed for an individual eager to bridge the gap between food science and data-driven insights.

From your EXPERTISE to ours

Key responsibilities for this position include:

• Assist the sensory scientists in designing, planning, and executing R&D sensory evaluations (discrimination, descriptive, hedonic/consumer tests).
• Coordinate panel scheduling, sample prep, and sensory session setup. * Recruit, train, and calibrate sensory panelists for descriptive analysis.
• Analyze sensory data using appropriate statistical methods (T-Test, ANOVA, PCA, cluster analysis, preference mapping).
• Present sensory results to stakeholders in R&D, Marketing, Quality, and Manufacturing.
• Drive to various stores to obtain commercially available dairy products for use by sensory expert panels and other tastings as needed.

Requirements

From your STORY to ours

Qualified applicants will contribute the following:

Education

• Candidate will possess or be pursuing a Bachelors or Masters degree in scientific field (Biology, Chemistry, Agriculture, etc.; Dairy or Food Science a plus)

Experience

• Interest in Sensory Science is a plus. The description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible responsibilities, tasks, and duties.
• Experience in conducting sensory testing, setup, and interpretation of results is a plus.

Competencies

• Strong attention to detail and excellent verbal and written communication skills.
• Need to be able to work independently and in teams, with minimal direct supervision.
• Demonstrated ability to interface and maintain effective relationships with all departments and employees in a team oriented organization.
• Ability to prioritize and meet deadlines within specified time constraints.
• Ability to operate in a transversal environment, across multiple departments.
• Ability to adapt in a changing work environment.
• Valid driver's license required.
• Ability to occasionally lift and/or move up to 50 pounds.

** This internship is expected to start at the end of March 2026 and end March 2027**

Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Further, any division of the Company that is an Affirmative Action Employer will comply with all related legal obligations.

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Doctor of Medicine | Family Practice
Location: Colebrook, NH

Employer: AAS Locum Tenens

Pay: Competitive weekly pay (inquire for details)

Start Date: ASAP

LocumJobsOnline is working with AAS Locum Tenens to find a qualified Family Practice MD in Colebrook, New Hampshire, 03576!

We are seeking a dedicated
and compassionate Board-Certified or Board-Eligible Family or Internal Medicine
Physician to join our team in Colebrook, NH. This full-time, outpatient
position involves providing comprehensive, high-quality primary care to a diverse
patient population across all ages, with a particular emphasis on chronic
disease management and care for an aging population. Physicians maintain their
own patient panels and are supported by a collaborative clinical team,
including an RN Team Leader and a Medical Assistant.

What We Offer:

• Salary $250,000 - $300,000 with
  potential wRVU productivity and quality bonuses
• Commencement and retention
  bonuses
• Relocation assistance
• No weekend or holiday shifts
• Generous time off: 5 weeks
  vacation, 5 days sick leave, plus 1 week CME
• $4,000 in CME funds
• Attractive benefits package,
  including retirement plans
• Malpractice insurance with
  tail coverage

Schedule & Practice
Details:

• Outpatient only, full-time
  (36 patient contact hours + 4 admin hours)
• Typical patient volume:
  16–22 patients per day
• EMR: Meditech Expanse with
  Dragon dictation
• May participate in day-time
  call rotation (no after-hours call)
• Clinical support from RN
  Team Leader and MA

Requirements:

• MD or DO with Board
  Certification or Board Eligibility
• Successful completion of an
  accredited residency (ACGME, AOA, or RCPSC)
• Current ACLS and BLS
  certification through the American Heart Association
• Comfortable managing a
  personal patient panel and working independently
• Strong experience in chronic
  disease management, especially with an elderly population

About Colebrook, NH:  Nestled in northern New
Hampshire, Colebrook offers a peaceful, rural lifestyle surrounded by natural
beauty—ideal for outdoor enthusiasts. You’ll find tight-knit community support,
low cost of living, and a rewarding pace of practice with true work-life
balance.

About AAS Locum Tenens

AAS Locum Tenens was founded by healthcare leaders who understand your career needs, guaranteeing the highest level of service and commitment. Backed by over 10 years experience, AAS Locum Tenens has become a leading locums provider for the most qualified candidates in the industry. Whether the needs are for short-term or long-term assignments, our industry experts can help providers navigate the unique and ever-changing landscape in today’s healthcare delivery environment. 

The caliber of our dedicated locums specialists combine seamlessly with our leading edge resources, providing an enhanced healthcare provider experience. Each assignment is given the same level of service excellence that our providers and clients have come to expect, while benefiting from our national reach and gaining access to the top assignments.

1710814EXPPLAT

Why work with the OpTech & GTECH?

We are woman-owned, value your ideas, encourage your growth, and always have your back! When you work with us, you get health and dental benefits, but you also have training opportunities, growth opportunities, 401K and competitive pay. Apply today!

Role: Associate EH&S Technician

Location: Plaquemine, LA

Onsite Requirement: 100% onsite

Duration: 1 year with high potential of extension or more

Overview:

The EH&S Technician will provide on‑site Environmental Health & Safety field support at our Chemical facility in Plaquemine, Louisiana. This role focuses primarily on worker safety, OSHA compliance, and EPA compliance through active field engagement.

Job Duties & Responsibilities

Provide 80% EH&S field coverage focused on:

• Worker safety monitoring
• OSHA compliance support
• EPA compliance support

Conduct field observations and engage with workers to promote safe work practices. Communicate safety expectations clearly and effectively to site personnel Partner with EH&S peers to ensure consistent safety coverage across designated areas. Support site safety initiatives as directed by EH&S leadership. Escalate concerns or findings appropriately to EH&S management

Must‑Have Skills & Qualifications

Strong communication skills (critical for success in this role)

Basic understanding of workplace safety principles

Previous safety training or EH&S exposure is preferred but not required

No specific technical or “hard” safety certifications are required for consideration

Key Working Relationships

Daily collaboration with:

• 7 other EH&S Field Technicians (peers)
• EH&S Team Manager (responsible for directing coverage areas)
• EH&S Leader / Hiring Manager
• Regular interaction with on‑site operations and employees to support safety compliance

Work Environment

• 100% On‑Site
• Field‑based safety role within a chemical manufacturing environment

Interview Process

• In‑person interview
• Single interview round
• Panel interview format (led by the Hiring Manager with additional panel members)

Personal Protective Equipment (PPE)

• PPE is required for work in the field areas
• Specific PPE will align with site safety standards and be addressed during onboarding

OpTech/GTECH is an Equal Opportunity Employer (EOE), all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

ARM EnerTech Associates, LLC (AETA) is a wholly owned subsidiary of ARM Group Enterprises Inc. AETA is seeking a self-driven and experienced Sr. Automation Specialist / Electrical Engineer who has a strong business acumen and embodies an ownership mentality. As a Sr. Automation Specialist / Electrical Engineer, you will collaborate with a team of multi-disciplined engineers and scientist, project managers, CAD designers, and other staff to service our Northeast US based clients’ needs. This role will establish client relationships, define client needs, develop winning strategies, prepare proposals, and manage the development, design and permitting of a wide range of projects related to automation, control systems, and control panel design. The successful applicant will be a highly motivated, resourceful, well-organized, and a cooperative producer and manager that is able to meet project goals, schedules, and budgets.

Responsibilities

• Manage and coordinate the development, design, and execution of multiple projects simultaneously.
• Develop project scopes, objectives, proposals, and budgets while effectively communicating with key stakeholders.
• Oversee project schedules, coordinate with subcontractors, and manage resources to ensure timely completion within budget.
• Responsible and accountable for projects including design of industrial controls systems including PLCs, HMIs, SCADA systems, and motor drives.
• Prepare, review, and update design drawings using AutoCAD.
• Support and lead on-site Site Acceptance Testing (SAT), system startup, and training functions related to PLC & HMI hardware and programming.
• Manage projects budgets to ensure they are delivered on time and under budget.
• Collaborate with other team members to meet deliverables on projects and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.
• Communicate and interface with clients and vendors.
• Writing technical documentation such as: Functional Descriptions, Functional Specifications, Test Documents, Reports, etc.
• Provide mentorship to junior engineers and contribute to technical knowledge-sharing within the team.

Requirements

• 10+ years’ expertise in industrial control systems, PLC/PAC programming, HMIs, VFDs, and SCADA systems.
• Proficiency in Microsoft Office Suite; experience with AutoCAD or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Comfortable working around energized power distribution equipment and related control systems.
• Requires travel to job sites including overnight stays to provide on-site commissioning, troubleshooting, customer support and training.
• Strong organizational and project management skills with the ability to manage multiple complex projects.
• Excellent communication and leadership skills with the ability to interact with clients and team members effectively.
• A proactive, problem-solving mindset with the ability to work independently and collaboratively.

Preferred Requirements:

• Degree in Electrical Engineering or Computer Engineering.
• Experience in Siemens and Allen-Bradley automation components.
• Knowledge of UL508A Control Panel design and standards.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Description:

Controls & Systems Analyst to support both our industrial automation projects. This role blends hands-on engineering—such as site surveys, control panel design, and automation support—with internal software development, troubleshooting, and system enhancements. If you enjoy solving technical problems, working across teams, and balancing customer-facing and internal project work, this role is for you.

What You’ll Do

• Conduct site surveys and collaborate with customers and project teams to define technical requirements.
• Review bid specs, drawings, and documentation to support accurate project quoting.
• Design industrial control panels, including layouts, wiring diagrams, and hardware selection.
• Support internal business systems through analysis, coding, testing, and maintenance of applications.
• Coordinate resources and timelines for larger system projects.
• Troubleshoot user issues, provide technical guidance, and support system improvements.
• Maintain high-quality documentation for both automation and software projects.
• Collaborate with engineering, operations, IT, and customer teams to ensure successful project outcomes.

What You Bring

• Bachelor’s degree in Computer Science, Information Systems, Engineering, or related field preferred.
• Experience in controls engineering and industrial automation support preferred.
• Familiarity with PLCs, HMIs, VFDs, sensors, and industrial electrical principles.
• Electrical CAD drawing experience (AutoCAD or BricsCAD preferred), CAD macro scripting a plus.
• Strong communication, troubleshooting, and documentation skills.
• Customer-focused mindset and ability to work cross-functionally.
• Valid driver’s license with insurable driving record.