Layerzero Power Systems Inc Jobs in Usa

In our 'always on' world, we believe it's essential to have a genuine connection with the work you do.

Aurora Networks is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products

.

We’re looking for bold thinkers and exceptional builders—engineers who thrive in highly technical environments and want to design hardware that powers the connected world. If you enjoy solving tough engineering challenges, collaborating with a talented cross‑functional team, and owning designs from concept through production, this is the role for you.

How You’ll help us connect the world:

As a Power Hardware Engineer reporting to the Sr. Manager of Hardware Engineering, you will play a key role in architecting and developing stand‑alone and embedded power supplies for indoor and outdoor CATV/networking equipment. You’ll work hands‑on across the entire product lifecycle—from early concept, modeling, and prototyping to validation, manufacturing, and sustaining engineering.

What You’ll Own

• Lead electrical design of SMPS‑based power supplies from concept through production release
• Design for challenging environments, ensuring high reliability and robustness
• Perform electrical, thermal, and DVT measurements throughout all stages of development
• Model, breadboard, and build prototypes for rapid iteration and validation
• Design and specify custom magnetic components for advanced SMPS designs
• Develop and optimize digital and analog control interfaces
• Mitigate input/output noise and improve power quality and efficiency
• Provide sustaining engineering support for existing power supply platforms
• Partner with manufacturing and supply chain teams to qualify alternate components and improve production efficiency

Required Qualifications:

• 7+ years of hands‑on SMPS design experience, including topologies such as Forward, Flyback, Buck, Boost, etc.
• Deep experience designing and specifying magnetics for power conversion
• Strong background in analog and digital power control circuits
• Solid understanding of noise mitigation, EMI/EMC considerations, and power integrity
• Strong knowledge of discrete semiconductors and passive components
• Proficiency with electrical modeling and simulation tools (e.g., SPICE‑based tools, simulation suites)

• Re-location assistance will be provided for candidates within U.S.

.Important Candidate Notice: On January 9, 2026, CommScope finalized the sale of its Connectivity and Cable Solutions segment, which included the CommScope name and brand, to Amphenol Corporation. The remaining businesses — Access Networks Solutions (now rebranded as Aurora Networks) and RUCKUS Networks have been unified under the new parent company, renamed as Vistance Networks. The role being advertised is part of Aurora Networks.

Why Join Us?

Vistance Networks shapes the future of communications technology, pushing past what is possible. We deliver solutions that bring reliability and performance to a world always in motion. Our global team of innovators and employees are trusted advisors who listen to customers first, then deliver

value.

Aurora Networks (formerly CommScope’s Access Networks Solution segment) is the world’s leading provider of access network solutions. Our comprehensive, end-to-end product portfolio supports global service providers with innovative, leading-edge HFC, PON and broadband network products.

If you want to grow your career alongside bright, passionate, and caring people who strive to create what's next…..come connect to your future at Vistance Networks.

Vistance Networks is an Equal Opportunity Employer (EEO), including people with disabilities and

veterans.

Program Manager - Power Distribution

Location: Raleigh, NC (Remote)

Are you an experienced Program Manager looking to join a supportive, passionate team? We have an attractive opportunity for you!

ABOUT THIS OPPORTUNITY:

As the Program Manager, you will oversee program execution from start to finish, providing strategic direction, mentorship to project managers, and exceptional client relationship management. You'll collaborate with cross-functional teams, monitor KPIs, optimize workflows, and ensure projects are delivered on time, on budget, and to the highest standards.

This is not an Information Technology-related position. If you do not have experience managing power distribution engineering/design projects, you will likely not be considered for the position.

Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH, for an initial 2-week in-person paid orientation and training period.

Responsibilities:

Project Leadership:

· Responsible for measuring and developing the project manager's abilities and effectiveness through KPI's and setting core competencies in accordance with corporate governance.

· Work closely with cross-functional teams to ensure smooth project implementation and customer satisfaction.

· Attend industry events, conferences, and networking opportunities to enhance the company's visibility.

· Serve as a mentor and coach to other project managers, offering guidance and support.

Program Planning and Strategy:

· Oversees project managers in the delivery of all program-related projects in accordance with the contractual agreement, scope, schedule, and budget of the project.

· Oversee the planning, scheduling, and execution of all phases of projects within the designated program in accordance with project management processes, policies, guidelines, and corporate governance.

· Develop and monitor high-level project workflows, validate project scopes, and collaborate on project priorities.

· Oversees the creation of proposals, kickoff meetings, and discovery calls.

Program Monitoring and Reporting:

· Prepare, review, and approve project change orders and/or correction actions in collaboration with the client, Project Engineer(s), and Operations Manager.

· Provide program cost forecasting over the life of the project or program.

Program Closure:

· Ensure the successful closure of the program, including finalizing all program activities, obtaining acceptance from stakeholders, and conducting post-program evaluations.

· Document lessons learned and share best practices with the organization.

Communication:

· Maintain clear and consistent communication with program stakeholders, including executive leadership, project managers, and cross-functional teams.

· Provide regular program updates to management and stakeholders.

· Resolve conflicts and facilitate effective communication within the program team.

· Liaises between project members, cross-functional teams, external vendors, and other stakeholders to ensure deliverables, requirements, schedules, cost, and meeting plans are communicated.

· Accountable for contractual correspondence and communication with all stakeholders, including identification and reporting of risks, liabilities, and opportunities.

Risk Management:

· Identify potential risks and issues that may impact project success and develop risk mitigation plans and contingency strategies. Monitor and manage risks throughout the project life cycle.

Budget Management:

· Manage Program level P&L reporting.

Customer/Client Relationship Management:

· Build and maintain strong relationships with existing clients, understanding their needs and providing exceptional service.

· Build relationships with Sr. Leadership within the customer organization.

· Build an understanding of the customer’s organizational structure and decision-making process.

· Identify and understand client challenges, propose solutions, and tailor product/service offerings accordingly.

· Conduct thorough market research to stay informed about industry trends, customer preferences, and competitor activities.

· Lead Program update calls and in-person meetings with external clients.

· Monitor and manage expectations of communication between staff and external clients.

· Develop and execute a strategic plan to identify and target new business opportunities in the market.

· Collaborate with the sales team to develop sales strategies, set targets, and achieve revenue goals.

· Prepare and deliver compelling presentations and proposals to potential customers.

· Negotiate contracts and terms of agreements with clients, ensuring a win-win outcome for both parties.

· Maintain accurate and up-to-date records of sales activities and client interactions in the CRM system.

· Keep abreast of the company's product/service offerings, updates, and enhancements.

· Other duties as assigned.

Competencies: Fit/Gap Analysis | Needs Analysis | Project Administration | Project Controls | Project Development | Project Estimation | Project Evaluation | Project Implementation | Project Lifecycle Management (PLM) | Project Management | Project Planning | Project Portfolio Management (PPM) | Project Scheduling | Project Status Reporting | Scope Management | Stakeholder Management | Project Management Software | Customer Satisfaction | Vendor Management | Contract Negotiation

WHAT WE'RE LOOKING FOR:

• Education Requirements – Bachelor’s of Science in Engineering/Engineering Technology or Bachelor's of Business Administration; or an equivalent combination of education and experience.
• Experience Requirements - A minimum of 7 years of experience in the Power Utility Industry with engineering, operations, and /or project management, including financial oversight and personnel development. And a minimum of 3 years of functional, or direct people management experience, with the proven ability to lead, motivate, and influence.
• Project Management Certification (PMP) or equivalent certification required.
• Proven experience in project management, with a track record of successfully delivering projects on time and on budget.
• Strong leadership, communication, and interpersonal skills, with the ability to manage multiple stakeholders with competing priorities.
• Must be results-driven with a dedicated focus on achieving successful project performance, customer satisfaction, and organic sales growth.
• Demonstrated a level of understanding of commonly used project management concepts, practices, and procedures.
• Adaptability and problem-solving abilities.
• Exceptional attention to detail and organizational skills.
• Available during the “core” work hours of 8:00 a.m. to 5:00 p.m. Evening and weekend work may be required as duties demand.
• Willing and able to travel regularly (30%+), which will include planned overnight travel
• Dependable transportation, a valid driver’s license, and insurance
• Able to pass a background check/drug test/driving record check.
• Authorized to work in the United States

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral communication, and to make discriminations in sound.

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this advertisement. This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

PM22

PIfca7806aeb7e-3631

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.

As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems. This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Operate boilers, and may operate engines and boiler associated auxiliary equipment.

• Read gauges, meters, and charts to track boiler operations.

• Monitor boiler water, chemical, and fuel levels.

• Activate valves to change the amount of water, air, and fuel in boilers.

• Fire coal furnaces or feed boilers, using gas feeds or oil pumps.

• Inspect and maintain equipment to ensure that it is operating efficiently.

• Check safety devices and perform environmental checks routinely.

• Record data and keep logs of operation, maintenance, and safety activity.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• City of Seattle Steam Engineer's License Grade 2.

• 3+ Year Experience of boiler operation and maintenance experience.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.

Shift Work Statement:

• This position is for 4th shift

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $60.92 per hour – $60.92 per hour

Applications for this position will be accepted until Apr. 03, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

• Responsible for updates, upgrades and maintenance of the following systems: Rail Operations Control System (ROCS); Predictive Arrival and Departure System (PADS), Positive Train Control (PTC) back-office systems, Traction Power Supervisory Control and Data Acquisition (SCADA) System and Rail Scheduling.
• Perform Quality Assurances and system engineering support of all back off systems including PTC office systems, Back Office Server (BOS), Rail Operations Control System (ROCS), Network Management System (NMS); Interoperable Train Control Message Server (ITCMS); Wayside Status Relay Service (WSRS), and the interfaces to all other operational systems.
• Develop, document, and maintain Standard Operating Procedures (SOPs), technical standards, and best practices for all train control and related systems to ensure consistency, safety, and regulatory compliance.
• Develop and implement training programs to upskill staff, mentoring team members at all levels on train control systems, operational procedures, and project management to strengthen technical capacity, foster skill development, and ensure succession planning. 
• Ensure Caltrain systems meet Federal Railroad Administration (FRA) mandated interoperability requirements with all tenant railroads; ensure Caltrain train control systems are compatible with Association of American Railroads (AAR) standards; follow the ITC guidelines that Caltrain must maintain ?N-2? backwards compatible software versions.
• Manage complex and large-scale train control engineering projects as the Technical Lead for Caltrain. 
• Manage the work of outside contractors and assist higher level Caltrain Directors and Executives in planning and evaluating the quantity and quality of work performed by subordinate staff.
• Supervise staff.  Hire, mentor, and take appropriate corrective and/or disciplinary action.  Ensure EEO policies and procedures are followed. Participate in selection of staff.  Coordinate staff training and professional development. Establish performance objectives. Monitor and evaluate employee performance.

• Establish and maintain work relationships with internal and external stakeholders to develop consensus on capital project work plans.
• Establish schedules and methods for providing train control system engineering design services on assigned capital projects; identify resource needs; review needs with appropriate management staff; allocate resources accordingly.
• Review and approve project schedules; assist in strategic planning; prepare status reports; coordinate project resources; communicate with all project participants on relevant issues; identify and resolve train control engineering issues.
• Provide general technical oversight of railroad train control systems.
• Perform system usage and performance analyses. 
• Support Caltrain Configuration Management (CM) Manager on configuration control, prioritize system defects and corrective actions; participate in Configuration Control Board (CCB) meetings as required.
• Direct, review, and approve the preparation of train control engineering designs, drawings, and specifications; identify and resolve technical engineering issues.
• Manage technical elements of the office systems warranty and long-term maintenance support service agreements.
• Review and approve operating manuals and procedures developed by various systems providers or vendors.
• Manage all technology refresh and software upgrades/updates and associated testing without interrupting regular railroad operations.
• Establish and lead a knowledge management framework to systematically capture, update, and share institutional knowledge through structured documentation, training programs, and knowledge transfer initiatives.
• Participate in the preparation and administration of the train control engineering program budget (Operating & Maintenance, and Capital); submit budget recommendations; monitor expenditures.
• Review consultant proposals and designs; recommend awards; conduct or participate in the pre-bid conferences prior to system contract awards.
• Perform all job duties and responsibilities in a safe manner to protect one?s self, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures in an effort to reduce or eliminate accidents.
• Perform other duties as assigned.

Sufficient experience, training and/or education to demonstrate the knowledge and ability to successfully perform the essential functions of the position. In lieu of a degree, work-related experience that demonstrates the skills and experience necessary to perform this role will be accepted. Development of the required knowledge and abilities is typically obtained through but not limited to:

• Bachelor?s degree in electrical/electronics, computer science, or a related field.
• Five (5) years of railroad industry experience in Train Control System and SCADA system development and maintenance.
• Two (2) years supervisory experience

• Knowledge and experience with AIMCore Product/Software a plus.
• Possesses a broad interdisciplinary knowledge of supervisory train control, wayside signal, highway crossing warning system, predictive and arrival system, traffic signal control, traction power substations and distribution, SCADA, server systems, virtualized server architectures, databases, cloud server systems, networking, etc.
• Knowledge of operating systems (UNIX, Linux, Microsoft)
• Knowledge of VHF and UHF radio voice and data communications, information assurance, data security and networking technologies.
• Experience with Configuration Management and Quality Assurance Systems.
• Ability to Interpret and revise engineering plans, drawings, and specifications.
• Proficient with Microsoft Office Suite.
• Effective oral and written communication skills.

PI282632635

Grocery #7048 2155 Usa Pkwy Sparks, NV 89437-5603 CP-7048-11014

$25.15 - $28.65/hr*

Full time

Shift may start between 11:00am - 5:30pm

* Must be at least 18 years old

Career opportunities in Power Equipment Operator roles include Lift Driver, Motorized Pallet Jack, Stock Picker, Clamp Lift and On Property Yard Driver.

As a Power Equipment Operator at Walmart Supply Chain, you will be operating power equipment to move product through the Distribution network to the Stores to service our Customers. Your role is critical to providing our customers with the product they expect at an everyday low price. You can expect the work to be very physically demanding with an extremely high focus on your safety and the safety of others. You will be driving power equipment and lifting heavy cases in extreme climates. The flow of freight is very fast-paced, and productivity expectations are high. At Walmart, we offer competitive pay as well as performance-based incentive awards and other great benefits for a happier mind, body, and wallet. Health benefits include medical, vision and dental coverage. Financial benefits include 401(k), stock purchase and company-paid life insurance. Paid time off benefits include parental leave, family care leave, bereavement, jury duty, and voting. Other benefits include short-term and long-term disability, company discounts, Military Leave Pay, adoption and surrogacy expense reimbursement, and more. You will also receive PTO and/or PPTO that can be used for vacation, sick leave, holidays, or other purposes. The amount you receive depends on your job classification and length of employment. It will meet or exceed the requirements of paid sick leave laws, where applicable. For information about PTO, see Live Better U is a Walmart-paid education benefit program for full-time and part-time associates in Walmart and Sam's Club facilities. Programs range from high school completion to bachelor's degrees, including English Language Learning and short-form certificates. Tuition, books, and fees are completely paid for by Walmart. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms. For information about benefits and eligibility, see . The actual hourly rate will equal or exceed the required minimum wage applicable to the job location.

Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums may be paid in amounts ranging from $0.35 per hour to $3.00 per hour in specific circumstances. Premiums may be based on schedule, facility, season, or specific work performed. Multiple premiums may apply if applicable criteria are met.

Powered Equipment Operations

• Transports freight, pulls merchandise, replaces freight, fills daily orders, and controls freight flow when operating moving equipment in a safe and correct manner.
• Transports and delivers freight to appropriate areas of the facility in an accurate and timely manner.
• Tells management about unsafe working conditions, damaged products, or improper procedures in the facility.
• Operates moving equipment in a safe and correct manner.
• Maintains a clean work environment to ensure safety and compliance.

Yard Driver (On Property)

• Drives tractor/trailers in a safe and correct manner by adhering to all regulations (e.g., company, local, state and federal). Transports trailers to appropriate destinations (on the facility property Only) in an accurate and timely manner.
• Tells management about unsafe working conditions, damaged products, or improper procedures.
• Operates tractor/trailer in a safe and correct manner.
• Maintains a clean work environment to ensure safety and compliance.

Must have

Yard Driver - On Property will require the following minimal requirement.

• Valid state-issued driver's license and 6 months experience operating tractor/trailer units.

Construction Manager (WV - Civil Power Project)

Plan, direct, coordinate, or budget, usually through subordinate supervisory personnel, activities concerned with the construction and maintenance of structures, facilities, and systems. Participate in the conceptual development of a construction project and oversee its organization, scheduling, and implementation.

• Bachelor’s degree from an accredited college or university and 15 years’ related experience and/or training; or equivalent combination of education and experience
• Demonstrated ability to perform on progressively more complex projects
• Power project experience

JOB DUTIES AND TASKS:

• Schedule the project in logical steps and budget time required to meet deadlines.
• Determine labor requirements and dispatch workers to construction sites.
• Inspect and review projects to monitor compliance with building and safety codes, and other regulations.
• Interpret and explain plans and contract terms to administrative staff, workers, and clients, representing the owner or developer.
• Prepare contracts and negotiate revisions, changes and additions to contractual agreements with architects, consultants, clients, suppliers and subcontractors.
• Obtain all necessary permits and licenses. Direct and supervise workers.
• Study job specifications to determine appropriate construction methods.

• Develop and implement quality control programs.
• Take actions to deal with the results of delays, bad weather, or emergencies at construction site.
• Confer with supervisory personnel, owners, contractors, and design professionals to discuss and resolve matters such as work procedures, complaints, and construction problems.
• Plan, organize, and direct activities concerned with the construction and maintenance of structures, facilities, and systems.
• Investigate damage, accidents, or delays at construction sites, to ensure that proper procedures are being carried out.
• Evaluate construction methods and determine cost-effectiveness of plans, using computers.
• Direct acquisition of land for construction projects.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

This position is 100% on site in Tucson, AZ and is 2nd shift (typically 4pm to 4am Monday to Friday)

Job Description:

The Test Solutions Center (TSC) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TSC is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TSC products are in engineering labs, in the field, and in production environments utilized for weapon system products. TSC has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment.

The Software Engineer II position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization.

The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products.

What You Will Do:

• Prioritize and handle several engineering tasks concurrently
• Interact and engage with Engineering, Operations PTEs, and program personnel to support factory readiness and robustness
• Troubleshoot software and test equipment instrumentation
• Work in a multidiscipline engineering team environment
• Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS)
• Support the development and derivation of requirements for software products

Qualifications You Must Have:

• Typically requires a bachelor’s degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of two (2) years of prior relevant experience OR an Advanced STEM degree.
• Minimum of 2 years prior relevant experience developing and debugging software written in an object-oriented language OR an advanced STEM degree where software projects were included in the curriculum
• Experience using Visual Studio as a development environment and as a troubleshooting tool
• Experience deploying executable objects to a Windows OS
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Experience developing Production Test Equipment in an Automation environment
• Introduction or experience with computer architecture and computer hardware optimization techniques
• Working knowledge of the development of software drivers for the operation of computer hardware interfaces
• Introduction or experience in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422
• Familiarity with laboratory test instrumentation, electronics, and software (e.g., oscilloscopes, power supplies, digital multimeters)
• Experience with Unified Modeling Language (UML) to visualize software architecture and design
• Professional experience of software development lifecycles, such as Waterfall and Agile
• Experience with Software Configuration Management principles
• Working understanding of the TEE One Page Process.
• Self-starter and able to manage workload to meet assigned deadlines
• Introduction or experience with Microsoft Azure DevOps Server or GitHub
• Written and interpersonal communication skills

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now:

Please consider the following role type definition as you apply for this role.  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires onsite work in Tucson, AZ: ,-az-location

#TestEngineering

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future.

We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success.

By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change.

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally.

We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future.

In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program; comprehensive medical, dental and vision benefits, including a robust wellness program; paid time off for vacation, holidays, and sick days; Expected salary range of $121,500 to $135,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).Demonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and proposed modification of plant specific maintenance and technical training programs (Chemistry, Engineering, Maintenance: Electrical, Instrumentation, and Mechanical, and Radiation Protection).Drives the clean energy center (CEC) and personnel performance improvement through the use of training.

Develops, schedules, coordinates, and conducts performance-based maintenance or technical training programs as required by user community in accordance with Constellation's systematic approach to training model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.Assures the training programs are maintained current and incorporate information gained from Institute of Nuclear Power Operations (INPO) Significant Operating Experience Reports and Constellation Nuclear Event Reports (NERs), Nuclear Regulatory Commission (NRC) Bulletins and Information Notices, CEC design change and backfit information, CEC procedure changes and revisions, new regulations, and training effectiveness reports.Support CEC and fleet in the areas of business initiatives, project management, refuel outage support, emergency preparedness duties, and special projects.Supervises the collection and maintenance of auditable training records and reports required to document training program activities.Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.High school diploma/GED with 5 years of nuclear technical background or 7 years of related (applicable discipline instruction) experience OR~ Associate's degree in technical discipline (e.g.

chemistry, electrical, engineering, instrumentation, mathematics, mechanical, radiation protection), education or training with 3 years of nuclear technical background or 5 years of related (applicable discipline instruction) experience OR~ Bachelor's degree in a technical discipline (e.g.

chemistry, engineering, health physics, mathematics, physics), education or training with 3 years of related (applicable discipline instruction) experience~2 years of training or education experience~ The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"~ Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

• Independently assure that the product has been developed in accordance with the declared processes, and that those processes are effective, understood, maintained, and continually improved
• Possess familiarity with the process, product, and development tools, and work closely with the program teams
• Be engaged, proactive, supportive, and contribute to the team's success rather than finding fault
• Have product development experience with an interest in process improvement or have supported program delivery through a background in configuration control or quality (process assurance)
• Independently review lifecycle data, prepare for and conduct audits, witness key development activities, oversee suppliers engineering quality, and liaise with civil and military airworthiness
• Observe tasks in progress, review related documentation, interview review participants, and examine completed work products
• Make detailed notes of areas reviewed and capture objective evidence to support findings
• Constructively identify issues, examples of best practice, and opportunities for improvement
• Review issues with the participants as they arise and record the disposition in the published record

• Bachelor's degree in Engineering with 2+ years of experience, OR
• Master's degree in Engineering, OR
• PhD in Engineering
• In order to be considered for this opportunity, you must be a U.S. Citizen

• Experience with configuration control or quality (process assurance)
• Familiarity with requirements management and validation
• Process development and continuous improvement
• Desire to successfully work in a team environment, establishing collaborative relationships with co-workers
• Ability to present technical data and conclusions/recommendations to senior engineers and management