K2view Tool Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Position Summary 

The Supply Chain Planning Manager is responsible for ensuring the right materials and finished goods are available at the right time and cost to support company growth and customer demand. This role oversees demand forecasting, inventory planning, vendor coordination, and purchase order management across raw materials, packaging components, and finished fragrance products. 

The ideal candidate will bring strong analytical thinking, vendor negotiation skills, and operational discipline to ensure reliable supply while optimizing inventory levels and working capital. 

Key Responsibilities 

Demand Planning & Forecasting 

• Develop and maintain monthly and quarterly sales forecasts based on historical sales, promotions, product launches, and seasonality. 
• Collaborate with Sales, Marketing, and Finance to refine demand projections.
• Translate forecasts into material and production requirements. 

Inventory Planning & Management 

• Monitor inventory levels across raw materials, packaging components, and finished goods. 
• Maintain appropriate safety stock levels to prevent stockouts while controlling excess inventory. 
• Provide regular reporting on inventory health, stock risks, and recommended replenishment actions. 

Procurement & Purchase Order Management 

• Create and manage purchase orders for raw materials, fragrance oils, bottles, pumps, caps, labels, cartons, and other packaging components. 
• Track open purchase orders and ensure on-time delivery from suppliers.
• Maintain clear visibility into inbound inventory and expected arrival timelines. 

Vendor & Supplier Management 

• Negotiate pricing, lead times, and terms with domestic and overseas suppliers.
• Build strong relationships with key vendors to improve reliability, cost, and service levels.
• Monitor supplier performance and address quality or delivery issues proactively.

Production Planning Support 

• Align inbound material availability with production schedules for filling, packing, and fulfillment operations. 
• Work closely with operations leadership to ensure production runs are properly supplied.

Reporting & Business Insights 

Provide regular reporting to leadership on: 

• Inventory levels and turnover 
• Open purchase orders 
• Supplier performance 
• Forecast accuracy 
• Cost trends and savings opportunities 
• Recommend purchasing strategies based on demand trends and sales projections.

Process Improvement 

• Identify opportunities to improve planning processes, forecasting accuracy, and supplier performance. 
• Implement systems or tools that enhance visibility across inventory, purchasing, and demand planning. 

Qualifications 

Education & Experience 

• Bachelor’s degree in Supply Chain, Business, Operations, or related field preferred.
• 5+ years of experience in supply chain planning, procurement, or inventory management. 
• Experience working with overseas vendors and international sourcing strongly preferred.
• Experience in consumer packaged goods (CPG), beauty, fragrance, or similar manufacturing environment preferred. 

Technical Competencies & Tools 

The ideal candidate will have experience or proficiency in the following tools and systems to enhance visibility, planning accuracy, and operational efficiency: 

Enterprise Resource Planning (ERP) Systems 

• Experience using ERP systems to manage purchasing, inventory, and supplier records (e.g., NetSuite, SAP Business One, Microsoft Dynamics, or similar).
• Ability to manage item master data, bill of materials, and inventory transactions within ERP systems. 

Demand Planning & Forecasting Tools 

• Experience with forecasting software or demand planning tools such as Netstock, Forecast Pro, Anaplan, or similar. 
• Ability to develop statistical forecasts and adjust projections based on market insights and promotions. 

Data Analysis & Reporting 

• Advanced proficiency in Microsoft Excel, including pivot tables, forecasting models, data analysis, and scenario planning. 
• Experience with Power BI, Tableau, or similar business intelligence tools for supply chain reporting and dashboards. 
• Ability to analyze large datasets and translate insights into purchasing and inventory strategies. 

Inventory Optimization Tools 

• Familiarity with inventory planning concepts such as safety stock modeling, reorder points, lead time variability, and inventory turnover analysis. 
• Experience using inventory optimization software or modules within ERP systems.

Procurement & Vendor Management Systems 

• Experience managing vendor communications, pricing structures, and purchase orders through digital procurement systems. 
• Familiarity with supplier scorecards, cost tracking, and contract management tools.

Collaboration & Workflow Tools 

• Proficiency with collaboration platforms such as Microsoft Teams, Slack, or similar tools for cross-functional communication. 
• Experience using project management or workflow tools such as Asana, , or Smartsheet to manage supply chain initiatives. 

Key Success Metrics 

• Inventory turns and working capital optimization 
• Forecast accuracy 
• On-time supplier delivery 
• Reduction in stockouts or production delays 
• Cost savings through vendor negotiations and purchasing strategy

Job Title: Estimator – Tool & Die Manufacturing

Salary: $70,000 – $80,000 per year

Bonus: Annual Christmas Bonus

Schedule: Day Shift | Monday–Friday | 7:00 AM – 3:30 PM

We are seeking an experienced Estimator to join a well-established tool and die manufacturing job shop that specializes in precision tooling, molds, fixtures, and dies used in metal and thermoforming production. This is a key role within the organization, responsible for developing accurate project estimates and supporting the sales and engineering teams in preparing competitive quotes for customers.

This position is open due to a retirement, and the outgoing estimator is currently working with the team to ensure a smooth transition and knowledge transfer. The estimator will collaborate closely with engineering, sales, and manufacturing teams to determine the cost, materials, labor, and production requirements for custom tooling projects.

This is an excellent opportunity to join a stable, family-owned manufacturing company where many employees have built long-term careers.

Key Responsibilities

• Prepare accurate cost estimates and quotes for custom tooling, molds, fixtures, and dies.
• Review RFQs, drawings, and project specifications to determine scope, materials, labor, and production requirements.
• Collaborate with engineering, sales, and design teams to gather project requirements such as durability, material specifications, and operating conditions.
• Calculate costs related to: Raw materials (steel, specialty metals, etc.), Labor and machining time, Outsourced processes or third-party services, Shipping and logistics
• Develop detailed proposals and pricing structures for customers.
• Maintain documentation including BOMs (Bill of Materials), cost breakdowns, and pricing data.
• Evaluate project timelines and production requirements to ensure estimates align with manufacturing capabilities.
• Track projects and adjust estimates when production costs or timelines change.
• Support the sales and engineering teams by ensuring quotes are competitive and technically accurate.

Products & Projects May Include

• Tool and die components
• Thermoforming molds
• Foil dies
• Tooling fixtures
• Chucks and collets
• Precision tooling used on press machines and CNC equipment
• Custom tooling for sheet metal production

Required Qualifications

• Experience in estimating or cost analysis within a manufacturing or machine shop environment
• Strong understanding of tooling, fixtures, dies, or metal manufacturing processes
• Ability to read and interpret blueprints and engineering drawings
• Familiarity with Bill of Materials (BOMs) and manufacturing cost breakdowns
• Experience evaluating materials, machining time, labor, and production costs
• Strong collaboration skills with engineering, sales, and production teams

Preferred Experience

• Experience in tool and die, mold making, or machining environments
• Knowledge of steel materials and tooling applications
• Exposure to CNC machining, thermoforming molds, or stamping dies
• Experience using 3D models or CAD drawings during quoting processes

Company Summary:

We are a well-established CNC and fabrication machine distributor with U.S. headquarters south of Kansas City. The company is renowned for its high-end machine tool products, low employee turnover, strong industry reputation, and a stable, honest, employee-focused culture. We emphasize treating both employees and customers well, promotes efficiency and continuous improvement, and maintains a collaborative, hands-off management style that values self-motivated and independent team members. The company sells and services premium machine tools with a strong focus on Fanuc controls.

Job Summary:

The National Service Manager will lead the service department for the machine tool division. This critical role involves overseeing existing Service Managers and service staff, providing technical support to order processing, collaborating with machine tool builders, and ensuring smooth installations, service delivery, and customer satisfaction. It is primarily office-based with minimal travel (occasional visits to other offices).

Responsibilities

• Lead and manage the Service Department, overseeing all service personnel and operations, including equipment installation, diagnostics, routine maintenance, repairs, and custom modifications.
• Develop and administer Service Department processes, covering:
• Service scheduling guidelines
• Allocation and coordination of service personnel and resources nationwide
• Recording and monitoring of assets in both internal databases and vendor platforms
• Monitoring and documenting costs related to installations and warranty work
• Issuing non-conformance reports and supplier corrective action requests (CARs)
• Designing and rolling out a structured Preventative Maintenance initiative
• Confirm that the Service Department is properly equipped with required support, including:
• Detailed installation and repair documentation
• Appropriate tools, equipment, and instrumentation
• Clear project timelines and schedules
• Organization and delivery of training programs for service technicians
• Access to technical support from equipment manufacturers and external service partners
• Oversee general projects involving machine tools, automation equipment, accessories, and add-ons; act as the main point of contact (POC) for third-party system integrations with external partners.
• Verify adherence to customer-specific protocols and requirements prior to and throughout project execution.
• Conduct technical evaluation of incoming machine orders in partnership with the Director and Inside Sales team:
• Review order specifications and clarify customer needs in collaboration with the sales team
• Communicate order particulars and timelines to Service Coordinators
• Offer technical expertise to order processing personnel for machine tool and accessory quotations/orders.
• Collaborate with machine tool manufacturers (and their sales/service teams) to optimize workflows and address any emerging concerns.
• Assist the sales team with technical details during the pre-sale phase, gathering necessary information to confirm proper machine and option configurations for smooth installation and optimal customer outcomes.

Requirements

• At least 2 years of relevant experience in the machine tool industry (in areas such as service, sales, applications engineering, or direct technical/hands-on roles).
• Previous supervisory or management experience within a service department (strongly preferred)
• Practical, hands-on background working directly with machine tools.
• Strong communication skills (customer facing and internally)
• Fundamental understanding of machine tool control systems, electrical components, and mechanical principles.
• Solid project management capabilities.
• Strong working knowledge of Microsoft Office applications (Word, Excel, Outlook, etc.).
• Familiarity with CRM platforms (Salesforce experience preferred).
• Basic proficiency in CAD-CAM software.
• Highly organized, with outstanding communication and interpersonal abilities.
• Excellent analytical and problem-solving skills, paired with a proactive, innovative approach.
• Commercially aware, focused on operational efficiency, and receptive to fresh ideas and methods (not rigid or overly fixed in viewpoints).
• Capable of grasping technical subject matter to communicate clearly and effectively with technicians, manufacturers, and other internal/external parties.

Preferred Qualifications

• Experience or education in manufacturing engineering.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Construction Coordinator, Project Coordinator, and/or Project Manager – Semiconductor Tool Hook-Up

Location: Taylor, TX (Onsite)

Industry: Semiconductor / Advanced Manufacturing

Employment Type: Full-Time / Contract (depending on experience)

About the Role

We are supporting a large, high-profile semiconductor manufacturing project in Taylor, TX and are seeking experienced Construction Coordinators, Project Coordinators, and Project Managers with tool hook-up and cleanroom experience. This is a fast-paced, highly technical environment where coordination, communication, and attention to detail are critical to success.

You’ll play a key role in ensuring the successful installation, coordination, and turnover of semiconductor tools by working closely with construction teams, vendors, engineers, and client stakeholders.

Key Responsibilities

• Coordinate and support semiconductor tool hook-up activities, including mechanical, electrical, gas, chemical, and exhaust systems
• Interface with tool vendors, subcontractors, facilities teams, and client representatives
• Track schedules, milestones, and deliverables to ensure on-time tool installation and readiness
• Support field execution, issue resolution, and daily coordination activities on site
• Review and manage documentation such as drawings, RFIs, change orders, and installation plans
• Monitor safety, quality, and compliance with site and client standards
• Provide regular status updates and reports to project leadership
• For Project Manager–level candidates: own scope, budget tracking, risk management, and stakeholder communication

Required Qualifications

• Experience supporting semiconductor manufacturing projects, preferably in tool installation or tool hook-up
• Background in construction coordination, project coordination, or project management
• Strong understanding of cleanroom environments and semiconductor facilities
• Ability to work onsite in Taylor, TX
• Strong organizational, communication, and problem-solving skills
• Proficiency with project tracking tools (Excel, MS Project, or similar)

Preferred Qualifications

• Experience with large-scale fab projects (logic or memory)
• Familiarity with MEP systems supporting semiconductor tools
• Experience working with EPCs, tool vendors, and owner/client teams
• OSHA 30 or similar safety training

Job Description:

• Utilize Catia V5 to design & draft tooling solutions to support aircraft modification and instrumentation installation.

• Ensure all designs, data, and documentation adheres to ITAR, DOD, and program specific security requirements.

• Collaborate with flight test engineers, stress, and mechanics to create functional, safe, and reliable tooling.

• Provide on-site technical support during aircraft modification.

• Coordinate with suppliers, internal shops, & customers to ensure manufacturability and rapid turnaround of complex tooling.

• Create laser tracker support models and instructions for locating critical parts within the aircraft reference system per interface control documentation (ICD) and internal/external conformance.

• Own and manage tooling schedules, balancing multiple priorities to ensure on time delivery of design packages within the forecasted budget.

• Create a variety of tool types such as Floor Assembly Jigs, Drill Jigs, Holding Fixtures, Overhead Mechanical Equipment, Shipping Fixtures, Weld Jigs, Contour Templates, Scaffolding etc.

• Build BOM’s and coordinate with Material Logistics for the ordering of tooling raw materials and components.

• Provide estimates for the Bids & Proposals team for internal & external tooling.

• Support the Methods team with assembly build sequencing.

• Create visual work instructions to showcase how tooling aligns with project objectives.

• Create formal documents (TCM’s) to resolve technical issues or questions regarding tooling.

• Analysis of tolerances from Laser Shoot & CMM inspections.

Requirements:

• 10 years supporting major aerospace and defense programs through the design and delivery of complex assembly tooling, jigs, fixtures, and mechanical systems (preferred)

• Proficient in Catia V5 & Enovia.

• Experience with NX & Teamcenter.

• Proficient in Word, Excel, & PowerPoint.

• Proficient in GD&T driven precision design.

• Knowledge of aircraft shoring practices.

• Knowledge of traditional tooling practices.

• Knowledge of traditional & NC machining practices & processes.

• Knowledge of safe working practices.

• Knowledge of 3D Printing.

• Good written and oral communication.

COMPANY OVERVIEW

JTI is a growing, progressive, and team-oriented company rooted in family values. We know that our employees are our number one asset. We not only encourage, but foster an environment that promotes professional growth, internal promotions, continuing education, and a safe work environment.

We are proud to employ a team of dedicated professionals with expertise in electrical construction, mechanical fabrication and installation, engineering, and controls and automation fields who are leaders in their disciplines. We strive to be an excellent strategic partner for clients, providing solutions and adding value to their businesses.

POSITION OVERVIEW

The Journeyman Electrician is responsible for the installation, maintenance, and repair of electrical systems in residential, commercial, and industrial environments. This role requires a deep understanding of electrical systems, blueprints, safety codes, and regulatory compliance. The ideal candidate will possess strong troubleshooting skills, attention to detail, and the ability to work independently or as part of a team.

PRIMARY RESPONSIBILITIES

• Perform site survey activities with a team and independently
• Perform routine maintenance on electrical wiring and systems
• Review job installation plan with the Crew Lead
• Assist in tracking inventory for each project
• Troubleshoot, test, repair and service technical equipment
• Troubleshoot motor and control systems
• Install and repair electrical equipment and fixtures
• Install various types of raceway and cable tray systems
• Adhere to all quality and safety codes
• Clean up the job site

QUALIFICATIONS

EDUCATION and/or EXPERIENCE:

• Journeyman/Journeywoman Electrician License
• Minimum 5 years of electrical experience
• Proficient knowledge of installation of PVC coated rigid conduit systems
• Able to lead a crew of various sizes ranging from 2 – 5 people
• Strong problem solving and critical thinking skills
• Must be able to pass a pre-employment drug screen
• Familiarity with electrical equipment and hand tools
• Familiarity with electrical schematics, blueprints, and manuals

EQUIPMENT & APPLICATIONS /WORKING CONDITIONS & PHYSICAL DEMANDS:

• Lifting and Carrying – Frequently lifting and carrying tools, materials, and equipment, often weighing up to 25-50 lbs.
• Climbing and Balancing – Using ladders, scaffolding, and lifts to reach high areas for wiring and fixture installations.
• Crouching and Kneeling – Working in tight spaces like crawlspaces, attics, and vaults.
• Standing for Long Periods – Spending hours on their feet while wiring or troubleshooting.
• Repetitive Movements – Engaging in repeated motions such as twisting, bending at the waist, kneeling, stripping wires, twisting connections, and using hand tools continuously
• Working in Uncomfortable Positions – Holding tools or equipment overhead, reaching into confined areas, or maintaining awkward postures.
• Exposure to Weather – Working outdoors in extreme heat, cold, rain, or wind
• Hand and Finger Dexterity – Grasping objects with the use of fingers, palm and wrists to hold/and or manipulate objects (hammers, saws, pencils, pens, etc.)
• Pulling and Pushing – Pulling wires through conduits or pushing heavy equipment into place.
• Carrying Personal Protective Equipment (PPE) – Wearing and carrying safety gear like hard hats, gloves, harnesses, and boots.

MINIMUM EQUIPMENT REQUIREMENTS (General Overview)

Hand Toolso

• Needle-nose pliers
• Side-cutting pliers (Lineman's pliers)
• Diagonal-cutting pliers
• Tongue-and-groove pliers (Channellock’s)
• Wire strippers

Screwdriverso

• Flathead screwdrivers (various sizes)
• Phillips head screwdrivers (various sizes)
• Insulated screwdriver set

Wrenches

• Adjustable wrenches (various sizes)
• Combination wrench set
• Allen wrench set (Hex keys)

Saws and Cutting Tools

• Hacksaw
• Drywall saw
• Utility knife

Measuring and Marking Tools

• Tape measure
• Level (torpedo level)

Conduit Tools

• Conduit reamer

Miscellaneous Tools

• Hammer
• Fish tape
• Torpedo level
• Multimeter or voltage tester
• Flashlight or headlamp
• Tool pouch – Belt – or backpack for Tool mobilization

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.