K2view Tool Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

COMPANY OVERVIEW

JTI is a growing, progressive, and team-oriented company rooted in family values. We know that our employees are our number one asset. We not only encourage, but foster an environment that promotes professional growth, internal promotions, continuing education, and a safe work environment.

We are proud to employ a team of dedicated professionals with expertise in electrical construction, mechanical fabrication and installation, engineering, and controls and automation fields who are leaders in their disciplines. We strive to be an excellent strategic partner for clients, providing solutions and adding value to their businesses.

POSITION OVERVIEW

The Journeyman Electrician is responsible for the installation, maintenance, and repair of electrical systems in residential, commercial, and industrial environments. This role requires a deep understanding of electrical systems, blueprints, safety codes, and regulatory compliance. The ideal candidate will possess strong troubleshooting skills, attention to detail, and the ability to work independently or as part of a team.

PRIMARY RESPONSIBILITIES

• Perform site survey activities with a team and independently
• Perform routine maintenance on electrical wiring and systems
• Review job installation plan with the Crew Lead
• Assist in tracking inventory for each project
• Troubleshoot, test, repair and service technical equipment
• Troubleshoot motor and control systems
• Install and repair electrical equipment and fixtures
• Install various types of raceway and cable tray systems
• Adhere to all quality and safety codes
• Clean up the job site

QUALIFICATIONS

EDUCATION and/or EXPERIENCE:

• Journeyman/Journeywoman Electrician License
• Minimum 5 years of electrical experience
• Proficient knowledge of installation of PVC coated rigid conduit systems
• Able to lead a crew of various sizes ranging from 2 – 5 people
• Strong problem solving and critical thinking skills
• Must be able to pass a pre-employment drug screen
• Familiarity with electrical equipment and hand tools
• Familiarity with electrical schematics, blueprints, and manuals

EQUIPMENT & APPLICATIONS /WORKING CONDITIONS & PHYSICAL DEMANDS:

• Lifting and Carrying – Frequently lifting and carrying tools, materials, and equipment, often weighing up to 25-50 lbs.
• Climbing and Balancing – Using ladders, scaffolding, and lifts to reach high areas for wiring and fixture installations.
• Crouching and Kneeling – Working in tight spaces like crawlspaces, attics, and vaults.
• Standing for Long Periods – Spending hours on their feet while wiring or troubleshooting.
• Repetitive Movements – Engaging in repeated motions such as twisting, bending at the waist, kneeling, stripping wires, twisting connections, and using hand tools continuously
• Working in Uncomfortable Positions – Holding tools or equipment overhead, reaching into confined areas, or maintaining awkward postures.
• Exposure to Weather – Working outdoors in extreme heat, cold, rain, or wind
• Hand and Finger Dexterity – Grasping objects with the use of fingers, palm and wrists to hold/and or manipulate objects (hammers, saws, pencils, pens, etc.)
• Pulling and Pushing – Pulling wires through conduits or pushing heavy equipment into place.
• Carrying Personal Protective Equipment (PPE) – Wearing and carrying safety gear like hard hats, gloves, harnesses, and boots.

MINIMUM EQUIPMENT REQUIREMENTS (General Overview)

Hand Toolso

• Needle-nose pliers
• Side-cutting pliers (Lineman's pliers)
• Diagonal-cutting pliers
• Tongue-and-groove pliers (Channellock’s)
• Wire strippers

Screwdriverso

• Flathead screwdrivers (various sizes)
• Phillips head screwdrivers (various sizes)
• Insulated screwdriver set

Wrenches

• Adjustable wrenches (various sizes)
• Combination wrench set
• Allen wrench set (Hex keys)

Saws and Cutting Tools

• Hacksaw
• Drywall saw
• Utility knife

Measuring and Marking Tools

• Tape measure
• Level (torpedo level)

Conduit Tools

• Conduit reamer

Miscellaneous Tools

• Hammer
• Fish tape
• Torpedo level
• Multimeter or voltage tester
• Flashlight or headlamp
• Tool pouch – Belt – or backpack for Tool mobilization

Position Summary 

The Supply Chain Planning Manager is responsible for ensuring the right materials and finished goods are available at the right time and cost to support company growth and customer demand. This role oversees demand forecasting, inventory planning, vendor coordination, and purchase order management across raw materials, packaging components, and finished fragrance products. 

The ideal candidate will bring strong analytical thinking, vendor negotiation skills, and operational discipline to ensure reliable supply while optimizing inventory levels and working capital. 

Key Responsibilities 

Demand Planning & Forecasting 

• Develop and maintain monthly and quarterly sales forecasts based on historical sales, promotions, product launches, and seasonality. 
• Collaborate with Sales, Marketing, and Finance to refine demand projections.
• Translate forecasts into material and production requirements. 

Inventory Planning & Management 

• Monitor inventory levels across raw materials, packaging components, and finished goods. 
• Maintain appropriate safety stock levels to prevent stockouts while controlling excess inventory. 
• Provide regular reporting on inventory health, stock risks, and recommended replenishment actions. 

Procurement & Purchase Order Management 

• Create and manage purchase orders for raw materials, fragrance oils, bottles, pumps, caps, labels, cartons, and other packaging components. 
• Track open purchase orders and ensure on-time delivery from suppliers.
• Maintain clear visibility into inbound inventory and expected arrival timelines. 

Vendor & Supplier Management 

• Negotiate pricing, lead times, and terms with domestic and overseas suppliers.
• Build strong relationships with key vendors to improve reliability, cost, and service levels.
• Monitor supplier performance and address quality or delivery issues proactively.

Production Planning Support 

• Align inbound material availability with production schedules for filling, packing, and fulfillment operations. 
• Work closely with operations leadership to ensure production runs are properly supplied.

Reporting & Business Insights 

Provide regular reporting to leadership on: 

• Inventory levels and turnover 
• Open purchase orders 
• Supplier performance 
• Forecast accuracy 
• Cost trends and savings opportunities 
• Recommend purchasing strategies based on demand trends and sales projections.

Process Improvement 

• Identify opportunities to improve planning processes, forecasting accuracy, and supplier performance. 
• Implement systems or tools that enhance visibility across inventory, purchasing, and demand planning. 

Qualifications 

Education & Experience 

• Bachelor’s degree in Supply Chain, Business, Operations, or related field preferred.
• 5+ years of experience in supply chain planning, procurement, or inventory management. 
• Experience working with overseas vendors and international sourcing strongly preferred.
• Experience in consumer packaged goods (CPG), beauty, fragrance, or similar manufacturing environment preferred. 

Technical Competencies & Tools 

The ideal candidate will have experience or proficiency in the following tools and systems to enhance visibility, planning accuracy, and operational efficiency: 

Enterprise Resource Planning (ERP) Systems 

• Experience using ERP systems to manage purchasing, inventory, and supplier records (e.g., NetSuite, SAP Business One, Microsoft Dynamics, or similar).
• Ability to manage item master data, bill of materials, and inventory transactions within ERP systems. 

Demand Planning & Forecasting Tools 

• Experience with forecasting software or demand planning tools such as Netstock, Forecast Pro, Anaplan, or similar. 
• Ability to develop statistical forecasts and adjust projections based on market insights and promotions. 

Data Analysis & Reporting 

• Advanced proficiency in Microsoft Excel, including pivot tables, forecasting models, data analysis, and scenario planning. 
• Experience with Power BI, Tableau, or similar business intelligence tools for supply chain reporting and dashboards. 
• Ability to analyze large datasets and translate insights into purchasing and inventory strategies. 

Inventory Optimization Tools 

• Familiarity with inventory planning concepts such as safety stock modeling, reorder points, lead time variability, and inventory turnover analysis. 
• Experience using inventory optimization software or modules within ERP systems.

Procurement & Vendor Management Systems 

• Experience managing vendor communications, pricing structures, and purchase orders through digital procurement systems. 
• Familiarity with supplier scorecards, cost tracking, and contract management tools.

Collaboration & Workflow Tools 

• Proficiency with collaboration platforms such as Microsoft Teams, Slack, or similar tools for cross-functional communication. 
• Experience using project management or workflow tools such as Asana, , or Smartsheet to manage supply chain initiatives. 

Key Success Metrics 

• Inventory turns and working capital optimization 
• Forecast accuracy 
• On-time supplier delivery 
• Reduction in stockouts or production delays 
• Cost savings through vendor negotiations and purchasing strategy

*Securian Financial Groups internal position title isInfrastructure Consultant.

Position Summary:

We are looking for an AWS Dev OpsEngineer with hands-on experience in AWS Tools to help build and maintain cloud infrastructure that supports our data and analytics platforms. This role is ideal for someone with a solid foundation in cloud engineering who is ready to take ownership of infrastructure components and collaborate across teams to deliver scalable, secure, and efficient solutions. Executes projects to research, proof of concept, and implement new solutions. Maintains awareness of trends and technologies to meet new and emerging stakeholder requirements.

Responsibilities include but not limited to:

• Champion the selection of Data and Analytics platforms and tools to be used across the enterprise.
• Engage with users and vendors to execute technology proof of concepts that validate use cases and the value of new solutions.
• Onboard new platforms and tools to ensure solutions are adopted effectively across the organization.
• Collaborate with Data Engineering and Data Science teams to identify tooling gaps and inefficiencies and partner to implement solutions for their needs.
• Build and maintain AWS infrastructure using Infrastructure as Code (IaC) tools such as Terraform or CloudFormation.
• Configure and manage core AWS services including EC2, S3, IAM, RDS, Lambda, Glue, Redshift and VPC Networking.
• Support data engineering and analytics teams by provisioning and optimizing cloud resources for data pipelines and analytics workloads.
• Implement monitoring, logging, and alerting solutions using tools like CloudWatch.
• Participate in CI/CD pipeline development and deployment automation.
• Ensure infrastructure security through proper IAM policies, encryption, and network configurations.
• Collaborate with data engineers, data scientists, and solution architects to improve infrastructure design and performance.
• Document infrastructure processes and configurations for operational transparency and team knowledge sharing.
• Ability to work with ambiguity and organize requirements to identify options.
• Ability to build productive relationships and collaborate with partners and stakeholders.
• Proficient in managing and maintaining Linux-based systems, including installation, configuration, performance tuning, and troubleshooting. Experienced with shell scripting, system security, user management, and automation tools to ensure reliable and efficient server operations.

Qualifications:

• 2-5 years of experience in cloud infrastructure engineering, with a focus on AWS.
• Experience working with structured and unstructured data and data storage technology RDS Postgres, S3
• Proficiency in Infrastructure as Code tools (Terraform, CloudFormation, or AWS CDK).
• Experience with AWS services relevant to data and analytics (e.g., Glue, Redshift).
• Familiarity with DevOps tools and practices (e.g., Git, GitHub, CI/CD, Docker).
• Basic scripting skills in Python, Bash, or PowerShell.
• Understanding of cloud networking, security, and cost optimization principles.
• Strong communication and collaboration skills.

Preferred Qualifications:

• AWS certification (e.g., AWS Certified Solutions Architect - Associate, Associate Developer or Associate Machine Learning Engineer).
• Exposure to big data tools and frameworks (e.g., Spark, Hive). Airflow, Control M, Streamsets
• Cloud Data Platforms: Snowflake, AWS Redshift, RDS, Postgres
• Data Governance & Cataloging: Informatica Intelligent Data Management Cloud (IDMC), Cloud Data Governance and Catalog (CDGC)
• Master Data Management: Reltio MDM for authoritative data domains
• AI Enablement: SageMaker, AWS Bedrock, Textract, etc. for AI development, MLflow for model lifecycle management
• Experience working in agile or cross-functional teams.

#LI-Hybrid**This position willhave a hybrid working arrangement, workingin-officefor a minimum of3days aweek.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. Ifyou'reina commutable distance (90 minutes)you'lljoin us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Join the team leading the next evolution of virtual care.

At Teladoc Health, you are empowered to bring your true self to work while helping millions of people live their healthiest lives.

Here you will be part of a high-performance culture where colleagues embrace challenges, drive transformative solutions, and create opportunities for growth. Together, we're transforming how better health happens.

Summary of Position

The Principal AI Security Engineer is a senior technical leader on the AI Security team, responsible for designing, building, and operating security controls for generative AI and Machine Learning (ML) systems across their full lifecycle: data, training, deployment, and runtime.

This role is deeply hands-on: you will work directly with data science, MLOps, platform, devops and application teams to secure LLMs, RAG systems, AI agents, and AI-enabled products. You will also lead the intake and review process for AI use cases, helping the organization adopt AI safely and at scale in a highly regulated environment.

The ideal candidate combines:

* Strong security engineering and cloud architecture experience

* Deep, current familiarity with modern AI/LLM tooling and practices

* Familiar and can cover basic coding within the AI tooling space (python, others)

* The ability to communicate clearly with senior leadership and influence enterprise-wide strategy

Essential Duties and Responsibilities

Secure AI / ML platforms and workloads

* Lead security architecture and threat modeling for AI/ML systems, including LLMs, RAG pipelines, agents, and AI-powered applications.

* Design and implement security controls as code (services, libraries, infrastructure-as-code, policy-as-code) for AI/ML platforms and workloads.

* Lead and help setup the basic infrastructure needed to safely rollout AI - MCPs, LLMs, pipelines, Test harness for AI (ie: harmbench), intake automation.

* Partner with data science and MLOps teams to harden:

• Data ingestion and labeling
• Training and fine-tuning pipelines
• Model registries and deployment workflows
• Inference APIs, agents, and integrations

* Define and champion secure reference architectures and patterns for common AI use cases and focus on composable architecture.

AI use case intake & governance

* Design, implement, and continuously improve the intake, triage, and review process for AI/ML and generative AI use cases across the organization.

* Build and automate self-service workflows (e.g., request forms, risk questionnaires, routing, approvals) that balance speed of delivery with security, privacy, and compliance with a focus on risk scoring and scorecards.

* Define risk-based criteria for AI use case approval, including data sensitivity, model and vendor selection, integration patterns, and control requirements; this will involve in re-mapping the complete end to end lifecycle.

* Review proposed AI solutions from concept through deployment, providing clear, actionable guidance to product and engineering teams.

* Maintain visibility into the AI use case portfolio and risk posture, and provide regular reporting to leadership and governance bodies.

Monitoring, detection & assurance

* Establish and maintain monitoring and detection for AI-specific threats, such as:

• Prompt injection and jailbreak attempts
• Data exfiltration and sensitive data exposure
• Misuse or abuse of AI tools and agents
• Anomalous model or pipeline behavior

* Integrate AI/ML systems with existing logging, SIEM, and incident response processes.

* Lead or participate in AI-focused security assessments, red-teaming, and adversarial testing; drive remediation and verification.

Strategy, leadership & enablement

* Help define and evolve the organization's AI security strategy, standards, and roadmap in partnership with Security, Engineering, Data, Legal, Privacy, and Risk.

* Translate global privacy, data sovereignty, and regulatory requirements into practical technical controls for AI workloads across multiple cloud environments.

* Prepare and deliver executive-ready briefings and narratives on AI security risks, controls, and progress.

* Mentor other engineers and serve as THE internal subject matter expert on AI/ML security, generative AI, and LLM-based systems.

Qualifications Expected for Position

• 7+ years of experience in information security, security engineering, or related fields, including significant time building and securing production systems.
• 3+ years of hands-on experience with AI/ML technologies (such as LLMs, RAG, model training/fine-tuning, MLOps, or AI-powered products), including implementation of security controls or guardrails for these systems.
• Strong programming skills in one or more relevant languages (e.g., Python, TypeScript/JavaScript, Go, or similar), with a track record of contributing to production-grade tools, services, or libraries.
• Deep understanding of cloud security architecture and controls on at least one major cloud platform (AWS, Azure, or GCP), including identity, networking, secrets management, data protection, logging, and monitoring.
• Experience designing and implementing controls in a highly regulated environment; healthcare or financial services preferred.
• Demonstrated ability to lead complex technical initiatives across multiple teams, from problem definition through design, implementation, and adoption.
• Proven ability to communicate complex technical and risk topics clearly to both engineering teams and senior leadership.

Preferred Qualifications:

* Practical experience securing LLM- and genAI-based systems, such as:

• RAG architectures backed by internal data
• AI assistants, copilots, or agents integrated with enterprise tools
• Fine-tuned models and model hosting platforms

* Experience with AI IDE tools

• cursor, windsurfer, others
• Knows the security problems and has practical solutions that balances innovation with innovation.

* Familiarity with AI/ML frameworks and ecosystems (e.g., TensorFlow, PyTorch, Scikit-learn) and/or modern LLM development stacks and IDEs (e.g., API-based LLMs, self-hosted models, AI-enhanced coding tools).

* Experience with:

• Security for data pipelines, feature stores, and model registries
• Detection engineering or SIEM tuning for AI-related events
• Red-teaming or adversarial testing of AI systems

* Evidence of ongoing engagement with AI and security (such as side projects, open-source contributions, lab environments, publications, or conference talks).

* Familiarity with emerging AI security and safety standards and forward-looking industry guidance and horizon reports.

* Relevant certifications (e.g., cloud security, security engineering, or governance) are a plus.

* Strong analytical and problem-solving skills, with the ability to operate effectively in a fast-evolving technical and regulatory landscape.

* High level of integrity and ethical conduct.

This role is a fit if you:

* Regularly build, break, or secure AI/ML or LLM-based systems in your day-to-day work or personal projects.

* Are comfortable reading and writing code, experimenting with new AI tools, and wiring them into real systems.

* Enjoy turning ambiguous AI ideas and risks into concrete architectures, controls, and automation.

* Can move fluidly between deep technical discussions and concise, executive-level explanations.

This role is not a fit if you:

* Prefer to focus solely on policy, governance, or vendor assessments without hands-on technical work.

* Do not actively engage with current AI/LLM tooling, research, and emerging practices.

* "Describe a specific LLM or AI/ML system you have secured. What were the main risks and what controls did you implement?"

* "What AI tools, libraries, or environments do you actively use or experiment with today (work or personal), and for what?"

* "What do you see as the most important AI security or safety developments on the horizon over the next few years, and why?"

The base salary range for this position is$180,000 - $190,000. In addition to a base salary, this position is eligible for a performance bonus and benefits (subject to eligibility requirements) listed here: Teladoc Health Benefits 2026.Total compensation is based on several factors including, but not limited to, type of position, location, education level, work experience, and certifications.This information is applicable for all full-time positions.

We follow a Flexible Vacation Policy, intended for rest, relaxation, and personal time. All time off must be approved by your manager prior to use. You will also receive 80 hours of Paid Sick, Safe, and Caregiver Leave annually. This applies to full-time positions only. If you are applying for a part-time role, your recruiter can provide additional details.

As part of our hiring process, we verify identity and credentials, conduct interviews (live or video), and screen for fraud or misrepresentation. Applicants who falsify information will be disqualified.

Teladoc Health will not sponsor or transfer employment work visas for this position. Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future.

Why join Teladoc Health?

• Teladoc Health is transforming how better health happens. Learn how when you join us in pursuit of our impactful mission.

• Chart your career path with meaningful opportunities that empower you to grow, lead, and make a difference.

• Join a multi-faceted community that celebrates each colleague's unique perspective and is focused on continually improving, each and every day.

• Contribute to an innovative culture where fresh ideas are valued as we increase access to care in new ways.

• Enjoy an inclusive benefits program centered around you and your family, with tailored programs that address your unique needs.

• Explore candidate resources with tips and tricks from Teladoc Health recruiters and learn more about our company culture by exploring #TeamTeladocHealth on LinkedIn.

As an Equal Opportunity Employer, we never have and never will discriminate against any job candidate or employee due to age, race, religion, color, ethnicity, national origin, gender, gender identity/expression, sexual orientation, membership in an employee organization, medical condition, family history, genetic information, veteran status, marital status, parental status, or pregnancy). In our innovative and inclusive workplace, we prohibit discrimination and harassment of any kind.

Teladoc Health respects your privacy and is committed to maintaining the confidentiality and security of your personal information. In furtherance of your employment relationship with Teladoc Health, we collect personal information responsibly and in accordance with applicable data privacy laws, including but not limited to, the California Consumer Privacy Act (CCPA). Personal information is defined as: Any information or set of information relating to you, including (a) all information that identifies you or could reasonably be used to identify you, and (b) all information that any applicable law treats as personal information. Teladoc Health's Notice of Privacy Practices for U.S. Employees' Personal information is available at this link.

Lou-Rich is currently seeking a highly skilled and experienced CNC Machine Operator to join our team. As a key player in the manufacturing process, youll be responsible for operating and maintaining the computer-controlled machinery that brings our customers products to life. Your expertise in programming, setting up, and operating CNC machines will be crucial in ensuring the production of high-quality precision parts.

Innovance, Inc.

Innovance is the holding company for a family of five, 100% employee-owned, Midwest-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing, Jorgensen). Our mission is to lead, nurture, and grow a team of industrial manufacturing companies committed to making our OEM customers products better.

About Lou-Rich

Lou-Rich is a fully integrated contract manufacturer specializing in complex projects. We provide precision machining, metal fabrication, assembly, and sourcing solutions to a variety of industries, including some of North Americas largest OEMs. Companies of all sizes from Fortune 500 companies to small, fast-growing operations trust Lou-Rich with their most vital and complex manufacturing projects.

Below is a summary of the duties and responsibilities for this role.

Position Description:

Operate CNC machine tools with single and/or multiple spindles in a safe manner. Monitor and control the quality of machining processes using hand inspection equipment. Maintain the production processes and work within the expected efficiencies that are established for the product. Willing to train highly motivated and mechanically inclined individuals.

Essential Functions:

Beneficial blueprint reading experience.

Use machine controls to cycle machine through; production operations, set-up, adjusting tool positions, and changing tools.

Change, and set up tools in tool holders by utilizing tool presetting equipment.

Perform first piece sample inspection according to the operation control plan. By utilizing qualified measuring devices, the operator monitors the part dimensions through continuous checking of part features and process control tools.

Maintain all lubricants and coolants on the machine that are used in daily operation.

Maintain a clean and efficient work area.

Operates all common machine shop equipment and hand tools skillfully.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The operator is required to be on their feet most of the day, using their hands to handle or feel objects, tools, or controls; reach with hands and arms; talk and hear around machinery. They will also be required to frequently walk, sit, stoop, kneel or crouch.

The operator must be capable of lifting and moving up to 15 pounds; frequently lift and move up to 50 pounds.

Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception.

Individuals will work near moving mechanical parts of machinery and electrically activated devices.

Individuals are occasionally exposed to airborne particles.

Perform math skills of addition, subtraction, multiplication, and division.

Familiar with decimals, fractions, and metric/English conversions

Overtime is typically voluntary. However, during busy production periods overtime will be required.

Operate overhead hoist/crane to assist with the lifting parts into and out of the fixture.

Other duties as assigned.

Requires passing a pre-employment screening, drug screen included.

Requires a high school diploma or equivalent.

Lou-Rich Training Requirements:

Applicable training will be completed by following the syllabi (Human Resources, Safety, IFS Time clock, IFS - Navigation, ISO, Inspection Hand Tools, Inspection Forms, CMM, and Technical) for each new hire and that will be verified by the Employee Orientation & Job Qualification form within the first 60 days of employment. Additional applicable training will be completed by following the individuals assigned department training matrix, CNC.

Follow training syllabus (Technical from above list). Effectiveness of training guidelines will be determined by employee knowledge and demonstration of learned concepts. Additional training after the first several weeks of on the job training will be determined by the Supervisor in preparation to operate on their own as needed. Any follow up training will be evaluated and provided at the 60-day review or as deemed necessary for the position.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands or fingers and talk and hear.

Work Environment:

The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Americans with Disabilities Act:

If you are a qualified individual with a disability, you have a right to request that the Authority make reasonable accommodations in order to help you accomplish your work, which must still be performed in all essential functions.

PI69b37886187

• High school diploma, GED, or trade school education. Ideally an associate degree in manufacturing technologies or similar.
• Good understanding of machining metal and processes with CNC machines.
• The ability to diagnose machining problems: tool failure, rough finish, chip build up, etc.
• Proficiency in the use of computerized machine controls, precision measurement instruments, hand tools, and specialized trade tools.
• Use of computers to perform data entry and document production.
• Mechanical aptitude and use of significant mathematical skills.
• Must be able to proofread documents, read blueprints, train others, complete production paperwork.

• Work from part drawings, machine specifications and electronic control data, utilizing to a large extent established methods and standards data to layout operations and sequences, tooling arrangements, machine set up instructions and details for a number of recognized machining operations on standardized components having close tolerances and inspection requirements.
• Align and code steps for tool operations, speed, feeds, and work piece positions to conform to operational sequences.
• Monitor set ups and operations to prove programs to assure proper methodology sequences, tooling arrangements and quality of completed work piece.
• Operate CNC machines as needed to prove program.
• Revise programs to correct errors or deficiencies or to modify or improve to suit new tooling designs and to effect cost reductions.
• Work closely with Tool Design and Manufacturing personnel to plan tooling designs and arrangements for new work or modifications for the regular work.

Company Summary:

We are a well-established CNC and fabrication machine distributor with U.S. headquarters south of Kansas City. The company is renowned for its high-end machine tool products, low employee turnover, strong industry reputation, and a stable, honest, employee-focused culture. We emphasize treating both employees and customers well, promotes efficiency and continuous improvement, and maintains a collaborative, hands-off management style that values self-motivated and independent team members. The company sells and services premium machine tools with a strong focus on Fanuc controls.

Job Summary:

The National Service Manager will lead the service department for the machine tool division. This critical role involves overseeing existing Service Managers and service staff, providing technical support to order processing, collaborating with machine tool builders, and ensuring smooth installations, service delivery, and customer satisfaction. It is primarily office-based with minimal travel (occasional visits to other offices).

Responsibilities

• Lead and manage the Service Department, overseeing all service personnel and operations, including equipment installation, diagnostics, routine maintenance, repairs, and custom modifications.
• Develop and administer Service Department processes, covering:
• Service scheduling guidelines
• Allocation and coordination of service personnel and resources nationwide
• Recording and monitoring of assets in both internal databases and vendor platforms
• Monitoring and documenting costs related to installations and warranty work
• Issuing non-conformance reports and supplier corrective action requests (CARs)
• Designing and rolling out a structured Preventative Maintenance initiative
• Confirm that the Service Department is properly equipped with required support, including:
• Detailed installation and repair documentation
• Appropriate tools, equipment, and instrumentation
• Clear project timelines and schedules
• Organization and delivery of training programs for service technicians
• Access to technical support from equipment manufacturers and external service partners
• Oversee general projects involving machine tools, automation equipment, accessories, and add-ons; act as the main point of contact (POC) for third-party system integrations with external partners.
• Verify adherence to customer-specific protocols and requirements prior to and throughout project execution.
• Conduct technical evaluation of incoming machine orders in partnership with the Director and Inside Sales team:
• Review order specifications and clarify customer needs in collaboration with the sales team
• Communicate order particulars and timelines to Service Coordinators
• Offer technical expertise to order processing personnel for machine tool and accessory quotations/orders.
• Collaborate with machine tool manufacturers (and their sales/service teams) to optimize workflows and address any emerging concerns.
• Assist the sales team with technical details during the pre-sale phase, gathering necessary information to confirm proper machine and option configurations for smooth installation and optimal customer outcomes.

Requirements

• At least 2 years of relevant experience in the machine tool industry (in areas such as service, sales, applications engineering, or direct technical/hands-on roles).
• Previous supervisory or management experience within a service department (strongly preferred)
• Practical, hands-on background working directly with machine tools.
• Strong communication skills (customer facing and internally)
• Fundamental understanding of machine tool control systems, electrical components, and mechanical principles.
• Solid project management capabilities.
• Strong working knowledge of Microsoft Office applications (Word, Excel, Outlook, etc.).
• Familiarity with CRM platforms (Salesforce experience preferred).
• Basic proficiency in CAD-CAM software.
• Highly organized, with outstanding communication and interpersonal abilities.
• Excellent analytical and problem-solving skills, paired with a proactive, innovative approach.
• Commercially aware, focused on operational efficiency, and receptive to fresh ideas and methods (not rigid or overly fixed in viewpoints).
• Capable of grasping technical subject matter to communicate clearly and effectively with technicians, manufacturers, and other internal/external parties.

Preferred Qualifications

• Experience or education in manufacturing engineering.

Description

As a Manufacturing Engineering Intern at Elliott Manufacturing, you will have the opportunity to apply learned knowledge and skills while gaining valuable hands-on experience to start your career in Engineering. This internship will provide exposure to a manufacturing plant while also supporting other CentroMotion businesses remotely.

Responsibilities:

1. Establish inventory of manufacturing and quality control tooling.

2. Utilize existing Gage Control software to track tooling (if possible).

3. Establish physical storage locations for all tooling.

4. Implement 6S for tooling, so that missing tooling can be easily physically identified.

5. Establish check-in/check-out process for tooling.

6. Review QC tooling and ensure quantities of tools are appropriate for each tool type (too many/too little).

7. Look for opportunities to reduce QC calibrations for unnecessary and overabundance of tools.

8. Work with operators to create work instructions

Requirements

• Student of Junior or Senior standing currently pursuing a degree in Engineering or related field
• Strong attention to detail and organizational skills
• Excellent communication and interpersonal skills
• Proficient in Microsoft Office Suite
• Ability to multitask and prioritize tasks effectively
• Must be able to maintain confidentiality and sensitive information

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Construction Coordinator, Project Coordinator, and/or Project Manager – Semiconductor Tool Hook-Up

Location: Taylor, TX (Onsite)

Industry: Semiconductor / Advanced Manufacturing

Employment Type: Full-Time / Contract (depending on experience)

About the Role

We are supporting a large, high-profile semiconductor manufacturing project in Taylor, TX and are seeking experienced Construction Coordinators, Project Coordinators, and Project Managers with tool hook-up and cleanroom experience. This is a fast-paced, highly technical environment where coordination, communication, and attention to detail are critical to success.

You’ll play a key role in ensuring the successful installation, coordination, and turnover of semiconductor tools by working closely with construction teams, vendors, engineers, and client stakeholders.

Key Responsibilities

• Coordinate and support semiconductor tool hook-up activities, including mechanical, electrical, gas, chemical, and exhaust systems
• Interface with tool vendors, subcontractors, facilities teams, and client representatives
• Track schedules, milestones, and deliverables to ensure on-time tool installation and readiness
• Support field execution, issue resolution, and daily coordination activities on site
• Review and manage documentation such as drawings, RFIs, change orders, and installation plans
• Monitor safety, quality, and compliance with site and client standards
• Provide regular status updates and reports to project leadership
• For Project Manager–level candidates: own scope, budget tracking, risk management, and stakeholder communication

Required Qualifications

• Experience supporting semiconductor manufacturing projects, preferably in tool installation or tool hook-up
• Background in construction coordination, project coordination, or project management
• Strong understanding of cleanroom environments and semiconductor facilities
• Ability to work onsite in Taylor, TX
• Strong organizational, communication, and problem-solving skills
• Proficiency with project tracking tools (Excel, MS Project, or similar)

Preferred Qualifications

• Experience with large-scale fab projects (logic or memory)
• Familiarity with MEP systems supporting semiconductor tools
• Experience working with EPCs, tool vendors, and owner/client teams
• OSHA 30 or similar safety training

Job Description:

• Utilize Catia V5 to design & draft tooling solutions to support aircraft modification and instrumentation installation.

• Ensure all designs, data, and documentation adheres to ITAR, DOD, and program specific security requirements.

• Collaborate with flight test engineers, stress, and mechanics to create functional, safe, and reliable tooling.

• Provide on-site technical support during aircraft modification.

• Coordinate with suppliers, internal shops, & customers to ensure manufacturability and rapid turnaround of complex tooling.

• Create laser tracker support models and instructions for locating critical parts within the aircraft reference system per interface control documentation (ICD) and internal/external conformance.

• Own and manage tooling schedules, balancing multiple priorities to ensure on time delivery of design packages within the forecasted budget.

• Create a variety of tool types such as Floor Assembly Jigs, Drill Jigs, Holding Fixtures, Overhead Mechanical Equipment, Shipping Fixtures, Weld Jigs, Contour Templates, Scaffolding etc.

• Build BOM’s and coordinate with Material Logistics for the ordering of tooling raw materials and components.

• Provide estimates for the Bids & Proposals team for internal & external tooling.

• Support the Methods team with assembly build sequencing.

• Create visual work instructions to showcase how tooling aligns with project objectives.

• Create formal documents (TCM’s) to resolve technical issues or questions regarding tooling.

• Analysis of tolerances from Laser Shoot & CMM inspections.

Requirements:

• 10 years supporting major aerospace and defense programs through the design and delivery of complex assembly tooling, jigs, fixtures, and mechanical systems (preferred)

• Proficient in Catia V5 & Enovia.

• Experience with NX & Teamcenter.

• Proficient in Word, Excel, & PowerPoint.

• Proficient in GD&T driven precision design.

• Knowledge of aircraft shoring practices.

• Knowledge of traditional tooling practices.

• Knowledge of traditional & NC machining practices & processes.

• Knowledge of safe working practices.

• Knowledge of 3D Printing.

• Good written and oral communication.

Position: CNC Process Engineer

Location: Middlebury Indiana

Job Description

The CNC Process Engineer will lead the standardization and optimization of CNC machining operations across multiple identical vertical machining cells. This role involves converting subject-matter expertise into clear, repeatable shop-floor documentation, defining escalation tiers, and serving as the advanced technical escalation point for unique failures. The position also drives continuous improvement initiatives focused on cycle time reduction, tool life, chip evacuation, and tooling strategy, often collaborating directly with tooling vendors to design custom solutions.

Responsibilities

Capture tribal knowledge from CNC subject matter experts and translate it into standardized documentation.

Create and maintain Standard Operating Procedures (SOPs) and Operator-Driven Reliability (ODR) tasks.

Develop troubleshooting guides and decision trees for rapid issue resolution.

Standardize documentation across identical machine cells while clearly identifying exceptions.

Establish escalation tiers and support model for operators, skilled trades, and CNC engineers.

Provide high-level CNC troubleshooting and root cause analysis.

Improve process reliability, repeatability, and uptime.

Drive continuous improvement initiatives focused on cycle time and process stability.

Lead tooling optimization efforts including tool selection, feeds/speeds, and tool life management.

Collaborate with tooling vendors to design custom tooling solutions.

Address chip evacuation and high-volume machining challenges.

Develop training materials and deliver hands-on training for operators, skilled trades, and engineering staff.

Essential Skills

5+ years of CNC machining or CNC process engineering experience.

Strong documentation and technical writing skills.

Proven experience with troubleshooting, root cause analysis, and continuous improvement.

Ability to work directly on the manufacturing floor.

Additional Skills & Qualifications

Experience with Haas NGC control.

Knowledge of Haas Advanced Tool Management (ATM).

Understanding of global macro variables, mathematical operators, and logical functions in CNC programming.

Experienced CAM programmer.

Experienced G-code programmer.

Familiarity with Midaco (or similar) pallet change systems and programming.

Extensive knowledge of tooling selection and application.

Experience with high-volume machining, automated fixturing, pallet systems, and robot automation related to CNC machining.

Work Environment

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world.

At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together.

Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions – new equipment, retrofits, maintenance, outage planning and more – for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants.

Position Summary

We are seeking a Field Service Repair Technician to work out of our Milwaukee Service Center. The FS Repair Technician involves troubleshooting and repairing turbines, stators, and rotors in generators at customer locations. The candidate will learn to operate test equipment, diagnose issues, and determine necessary repairs. Responsibilities include assisting in testing components, using precision measuring instruments, and working under close supervision with inspections. The role also involves coordinating field service tooling and maintaining a professional image at job sites. The candidate should have a strong desire to advance to the Generator Technician position.

Essential Duties

• Help to construct and operate testing equipment to identify problems and determine necessary field service.
• Assist with paperwork, including test data, daily logs, job information, timesheets, and final reports.
• Learn procedures for rewinding, re-wedging, re-blocking, rebuilding stator bars/coils or cores, and repairing turbines and related components.
• Gain knowledge in winding insulation, curing, cooling stator bars/coils, and blocking bars/coils.
• Build and assemble slot wedges into stator core grooves.
• Acquire skills in stator core construction methods, including flooding, end winding, side bar packing, top and bottom filler, and resistance temperature detectors.
• Work with various resins and solvents.
• Become proficient with various hand and power tools.
• Learn to operate a portable milling machine and wire welding procedures.
• Help inventory and ensure supplies and equipment are in good working order before and after job site visits.
• Operate overhead cranes and lift trucks properly.
• Maintain a simplified tooling process by ensuring all responsible parties for a field project are aware of all tools sent out.
• Prepare purchase requisitions for tooling, materials, and chemicals, coordinating with various suppliers.
• Customize tooling designs or fabrication with various departments.
• Coordinate shipping and receiving of field service tooling to job sites.
• Inspect tools, including calibration and restocking, and follow procedures for testing electrical equipment.
• Coordinate the calibration of tooling and fabricate or modify as needed.
• Develop a mindset for service and courtesy.
• Perform other tasks requiring similar or lesser skills, usually of short duration to meet field service requirements.

Travel

• Up to 90%

Education and Required Experience

• High School Diploma or Equivalent.
• Trade or Technical Degree in a related field preferred.
• 1-3 years of experience with working knowledge of shop practices and basic electrical and mechanical fundamentals, gained through vocational training.
• Minimum 3 years previous experience in a similar or related role or 1-3 years’ experience in power generation field service, in lieu of vocational training.
• Cooperative work crew skills, as work is performed at field locations.
• Proficient in basic arithmetic operations, including decimals and fractions, and able to use formulas, blueprints, specifications, and tables.
• Skilled in using various precision measuring instruments. Familiarity with hand tools.
• Capable of operating overhead cranes and fork trucks.
• Proficient in Microsoft Office (Word, Excel, Outlook) and able to learn new software programs, such as Oracle for purchase requisitions.
• Previous experience in millwright, carpentry, welding, electrical, or HVAC roles preferred.
• Knowledgeable in Asbestos abatement and lead awareness training preferred.
• Possess a valid driver’s license for travel to customer sites.
• Must be able to pass requirements to gain unescorted access to a nuclear facility.
• Must be able to work without restriction throughout U.S, Canada, and Mexico.

Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.)

The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell.

Work Environment

While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud.

Additional Info

Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous time off.

Toshiba is an Equal Opportunity Employer.

Industrial Designer and Manufacturer, CAD/CAM – Competitive Salary - Oakwood Village, Ohio

Are you tired of design roles where your work never leaves the screen? Do you want to build real tooling, run the machines, and see the parts you design used in production?

In this role, you will take projects from concept through machining and final inspection. You will strengthen your CAD/CAM skills, gain hands-on CNC experience, and build practical manufacturing knowledge that few design roles offer.

The role

You will design and manufacture foundry patterns, molds, fixtures, and models using CAD/CAM tools such as SolidWorks, Autodesk PowerMILL, or Autodesk Fusion360. Then you will help machine and fabricate those designs using CNC equipment and manual tools.

Because you follow each project from start to finish, you gain a deeper understanding of how designs perform in real manufacturing and how to improve them.

Key Responsibilities

• Each part of your work helps you build valuable technical skills.
• Turn 2D drawings into 3D CAD models and grow your advanced CAD/CAM capability
• Design and manufacture foundry tooling used in casting processes
• Set up and operate 3-axis and 4-axis CNC machining centers and routers to build hands-on machining experience
• Design molds and fixtures used in plastics, polymer, concrete, and ceramic production
• Work with materials such as aluminum, steel, plastics, tooling boards, and wood to expand your fabrication skills

You will also manage multiple projects and see them through design, machining, and inspection. This gives you ownership of your work and practical experience across the full manufacturing process.

About Company

Reliable Pattern Works, Inc. is a leading foundry pattern, tooling, mold, and model manufacturer that services all types of industries nationwide. Our skilled design team will create and manufacture tools from supplied drawings, sample parts, ideas, or CAD files to generate the precise equipment that our customers need to produce quality parts.

The Benefits

• 401(k) retirement plan
• Employer contribution to 401(k)
• Employee health benefits
• 10 paid holidays
• Bereavement pay

The person

You enjoy solving design challenges and seeing your work become real products. You have experience with 3D CAD/CAM and CNC machining and like being involved in the full build process.

• Minimum 2 years’ experience in Solidworks
• Minimum 1 year experience in manufacturing using CNC machines

What’s next

If you want to grow your CAD/CAM and machining skills while taking projects from design to finished tooling, apply today.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.