Jm Eagle Pipe Jobs in Usa

Richard E. Pierson Construction Co., Inc. is hiring for Foreman throughout our Pennsylvania Region.

Responsibilities

• Ensure crew maintains professional relations with Owner, Engineer, and other members of the team
• Builds job by plans and specifications as directed by supervisor
• Supervises the lay out, assembly, and installation of various sizes and types of utility pipe
• Prior to commencing work activities, develops and executes an effective plan in cooperation with the Superintendent for the pipe installation and determines the means and methods necessary (including individual work activities) to meet project goals
• Assures the proper operation and maintenance of equipment under their control, including appropriate applications for the respective equipment
• Reviews Miss Utility policy and ensures employee compliance
• Preplans and schedules pipe installation on a daily basis, as required
• Knowledge of inspection requirements and material or equipment requirements
• Recognizes and immediately reports any requests for extra work
• Prepares or assists the Superintendent in the preparation of daily reports, work unity quantity reports, equipment reports, and receipt of materials
• Assures quality control and contract compliance of pipe installation under their supervision. Corrects or reports to the superintendent any suspicions of inaccurate layout
• Participates in safety meetings and the implementation of effective safety program and communication of Miss Utility policy
• Cooperates with company Safety Managers to ensure OSHA compliance at jobsites
• Assists in conducting post-incident investigations
• Identifies and recommends workers for potential career growth opportunities
• Responsible for training and development of workers

Qualifications

• High School Diploma or equivalent
• Certified to enter confined spaces, including climbing into and out of excavations up to 15 ft. in depth, using ladders, or crawling, as required
• 10 hour OSHA certification required
• 30 Hour OSHA certification preferred
• Working knowledge of standards, specifications, codes, regulations, and laws
• Working knowledge of applicable OSHA and DOT guidelines
• 5+ years experience with highway/utility construction
• 3+ years experience as a Pipe Foreman
• Must have a valid driver's license and meet company requirements and maintain "Approved Driver" status
• Must have excellent communication skills
• Ability to use good judgement with the ability to be an effective decision maker
• Has ability to get job done with minimal supervision, on time, and within budget

Richard E. Pierson Construction Co., Inc. is an Equal Opportunity Employer.

People. Principle. Purpose.

At Delta Pipeline, we actively engage people to learn, grow, and make a difference. We are looking for talented individuals who are searching for not just a job, but a career. We are a 100% employee-owned company where you have the opportunity to become a shareholder and build trustworthy, long-term, mutually profitable relationships.

Duties and Responsibilities

• Comprehensive knowledge and ability to install all types of sewer, water, fire and storm drain pipe
• Able to lay out and install water services, fire hydrants, detector checks, pipe connections etc. per Standard Drawings
• Able to effectively lead and direct crew members to meet pipe installation objectives
• Able to effectively interact with governing authorities (i.e. Superintendents, Inspectors etc.)
• Able to read and understand blueprints and specifications
• Able to read and understand survey grade stakes
• Able to calculate and set up laser/floliner to keep grade and set pipe grades
• Able to set shoring in accordance with OSHA safe practices
• Able to weld and solder copper piping

Position Requirements

• Education: High school diploma or equivalent
• Experience: 2 – 3 years related experience
• CPR, Competent Person, and Confined Space certifications
• Underground pipeline/wet utility experience (MUST HAVE)
• Able to work nights, weekends, and overtime as required
• Valid driver's license in good standing
• Able to commute to various sites in Southern CA (Los Angeles/Ventura/Riverside/San Bernardino/Orange Counties)

Physical Requirements

• Requires frequent bending, reaching, standing, walking, squatting, sitting, pushing, and pulling of heavy objects regularly throughout the work shift
• Able to work in sun, heat, dry, dirty and dusty conditions
• Able to lift a minimum of 75 pounds without assistance
• Requires manual dexterity to operate equipment and perform manual responsibilities

Benefits

• Competitive hourly rate
• Medical, Dental, Vision and life Insurance
• Employee Shares/Stock
• Profit Sharing
• 401(k)
• Paid Time Off/Paid Vacation
• 6 Paid Holidays
• Opportunities for development and advancement
• An employee-owned company culture that values people, principle, and purpose

**No third party or agency submissions will be accepted.

Benefits:

• Employee stock ownership plan
• Health insurance

Work Location: In person

Compensation: $41 - $44/hour

Manufacturing Yard Planning & Inventory Manager

Position Summary

The Manufacturing Yard Planning & Inventory Manager is responsible for planning, controlling, and optimizing raw materials, work-in-progress (WIP), and finished goods inventory-including steel coils, plates, and pipe products—across yard and storage operations.

This role ensures safe, efficient, and cost-effective material flow, supports uninterrupted production, and improves yard utilization, inventory accuracy, and dispatch readiness in alignment with production schedules, logistics requirements, and customer delivery commitments.

Key Responsibilities

Yard Planning & Layout Management

• Develop and maintain optimized yard layouts for steel coils, plates (LSAW and specialty grades), pipes (HFI / ERW / LSAW), finished goods, and dispatch zones.
• Ensure efficient movement of materials from storage to production with minimal handling and congestion.
• Coordinate stacking, segregation, and accessibility based on grade, size, and production priority.

Inventory Management & Control

• Own inventory accuracy for raw materials, WIP, and finished goods.
• Maintain real-time inventory visibility using ERP and WMS systems.
• Lead cycle counts, physical inventories, and variance resolution.
• Ensure FIFO compliance, heat traceability, and proper material identification.

Production & Dispatch Coordination

• Partner daily with production planning, coating, quality, and logistics teams.
• Ensure timely availability of materials to support production schedules.
• Support truck, rail, and barge dispatch activities.
• Prevent production delays caused by material shortages or misplacement.

Yard Operations & Safety Leadership

• Enforce safety standards for crane operations, forklifts, and heavy material handling.
• Ensure compliance with OSHA and internal safety policies.
• Conduct safety audits and implement corrective actions.
• Promote a strong, zero-incident safety culture.

Systems, Reporting & Continuous Improvement

• Use ERP/WMS tools to track inventory movement, aging, and dwell time.
• Develop and monitor KPIs related to inventory accuracy, yard utilization, damage, and dispatch performance.
• Lead Lean, 5S, and continuous improvement initiatives.
• Support automation and digital improvement efforts within yard operations.

Team Leadership

• Lead yard planners, inventory controllers, and yard supervisors.
• Set performance expectations, accountability, and development plans.
• Train teams on safety standards, systems, and best practices.

Qualifications & Experience

Education

• Bachelor’s degree in Supply Chain, Industrial Engineering, Logistics, or a related field.

Experience

• 7–12+ years of experience in yard operations, inventory control, or manufacturing logistics.
• Background in steel, pipe, or heavy manufacturing environments.
• Hands-on experience with steel plates, coils, and large-diameter pipe.
• ERP system experience (SAP preferred).
• Familiarity with rail, truck, and barge logistics.

Key Competencies

• Strong operational planning and execution skills
• Deep understanding of steel plate and pipe handling
• Safety-first leadership mindset
• Data-driven decision making
• Strong communication and people leadership skills
• Continuous improvement focus

Key Performance Indicators

• Inventory accuracy ≥ 99%
• Zero production delays due to material availability
• Reduced material handling and rehandling
• Improved yard utilization
• Reduced damage and demurrage
• On-time dispatch performance

Are you a results-driven leader with a proven ability to manage service projects and build strong client relationships? Do you thrive in a fast-paced, dynamic environment where you can take ownership of projects and drive business growth?

As a Service Plumbing Project Manager, you will have the opportunity to leverage your expertise to actively seek out, design, coordinate, and oversee commercial plumbing service projects while managing a portfolio of key accounts. This role plays a crucial part in maintaining strong client relationships, retaining existing business, and generating new project opportunities that contribute to the continued growth and success of SVM’s plumbing service department. In addition to managing the full lifecycle of service projects, you will help drive strategic account development and deliver solutions that align with our clients’ needs.

What You Will Do

• Develop and manage a portfolio of plumbing and piping accounts, specializing in service agreements, repairs, and commercial service projects.
• Proactively generate new business through prospecting, cold calling, emails, and onsite meetings with prospective clients.
• Build and manage a sales pipeline, tracking leads, proposals, follow-ups, and contract renewals, and provide regular updates in internal meetings.
• Conduct regular job walks and inspections to evaluate plumbing and piping systems, gather site information, and recommend repair or project solutions tailored to client needs.
• Prepare detailed proposals for new and existing clients, customizing scopes of work to meet client needs.
• Oversee service projects from inception to completion, ensuring alignment with client expectations, budget, and timeline.
• Manage project budgets, labor forecasting, job costing and material procurement to ensure financial performance and timely completion.
• Coordinate with project teams and field technicians to discuss job progress, troubleshoot issues, and ensure project milestones are met.
• Maintain all project documentation, including submittals, RFIs, change orders, purchase orders, and service reports, in an organized and accessible format.
• Participate in bi-weekly service project meetings to discuss pending and ongoing projects, labor allocation and challenges.
• Tracks and manage annual contract renewals, engaging with clients prior to expiration for repeat business.
• Identify and pursue cross-selling opportunities for HVAC services by collaborating with internal partners to deliver comprehensive service offerings.
• Collaborate with Engineering, Sales, and Operations teams to develop project scopes, ensure permitting and compliance requirements (e.g., Title 24) are met, and deliver seamless service execution.
• Collaborate with vendors to compile project submittals, procure materials, ensuring accurate pricing, delivery dates, and specifications.
• Maintain Work in Progress (WIP) reports and present financial updates in monthly accounting meetings.
• Address customer inquiries and concerns promptly, and accurately, escalating when necessary.
• Maintain a competitive edge by staying abreast of market trends, emerging technologies, and industry advancements within the assigned region.
• Provide technical expertise and attend job walks as needed to support internal teams with plumbing-related solutions.
• Conduct post-project follow-ups to address warranty issues, gather feedback, and identify additional service needs.
• Create detailed design solutions based upon site surveys, design drawings and in collaboration with sales engineers and senior team members.
• Collaborate with team members on unique opportunities or service contracts as required.
• Assist with other duties related to Service Projects as business requires.

Education, Skills & Experience

• 3-5 years’ experience as a Plumbing Project Manager, or equivalent 7-10 years of plumbing field management experience required.
• High school diploma or general education degree (GED; or equivalent combination of education and experience) required.
• Possesses a valid California’s Driver’s License and willing to submit to a DMV report a must
• Proficient in MS Office (Word, Excel, and Outlook), AutoCAD, Revit, and Bluebeam highly preferred.
• Proven expertise and comprehensive knowledge in plumbing, boiler, water treatment and process piping systems within diverse industries required.
• Proven experience in managing and installing new plumbing installations from breaking ground to building completion highly preferred.
• Proven experience in plumbing and/or boiler sales, estimating and system design highly preferred.
• Ability to identify field conditions and communicate viable retrofit design options to vendor sales engineers and team members required.
• Proven experience leading and developing small teams required.
• Proven ability to manage a diverse range of project budgets a must.
• Highly skilled in building relationships with customers a must.
• Outstanding ability to effectively communicate both verbally and written a must.

Compensation & Company Benefits Include

This is a full-time exempt position. The compensation for this role is $100,000 - $140,000 and is based on experience and skillset.

Health: Medical / Dental / Vision / Life & Disability Insurance / FSA

Well-Being: Robust Maternity & Paternity Leave / EAP / Paid Holidays / PTO / Interactive Breakroom

Financial Wellness: Deferred Compensation Plan / 401k w/ Employer Contribution / Employee Referral Bonus / “Positive Pulse”

Community Investment: Volunteer Opportunities / Team Building Activities / Employee Activities

Physical Requirements

As a Plumbing Service Project Manager in the Mechanical Contracting Industry, there are certain physical requirements you should be aware of. These requirements ensure that you are capable of performing the necessary tasks safely and effectively. Reasonable accommodations may be provided to qualified applicants who may not be able to fulfil certain aspects of the role. The key physical requirements for this role are outlined below:

• This role may involve physical activity including walking, standing, and driving while moving around the office and visiting construction sites.
• This role may be required to lift equipment, materials or tools up to 50 lbs.
• This role may be required to work at elevated heights and in various work conditions when overseeing installations and other project processes.
• This role may be required to navigate through confined spaces such as mechanical rooms, crawlspaces, or attics.
• This role may require reviewing and interpreting architectural drawings, schematics, blueprints and other technical documents related to plumbing projects.
• This role may work in various environments, including construction sites, commercial buildings, etc.
• This role may require the use of personal protective equipment (PPE) during job walks and site visits.

Who We Are

At SVM, we are more than just a leading mechanical contractor specializing in design-build commercial HVAC, plumbing, piping, service/maintenance, and 24-hour emergency services. We’re a team dedicated to supporting the Bay Area, Sacramento, and Nevada regions with trusted expertise and an unwavering commitment to delivering exceptional experiences at every level.

Our success is built on a collaborative culture that values teamwork, innovation, and doing the right thing. We take pride in fostering an inclusive and welcoming environment where every team member feels supported, valued, and empowered to grow. At SVM, we believe our people are our greatest asset, and we prioritize their development, well-being, and success.

Our state-of-the-art fabrication facility reflects our dedication to quality and efficiency. By leveraging cutting-edge 3D design and manufacturing technology, we detail and fabricate ductwork, piping, and pre-skidded equipment to execute projects with precision and excellence.

At SVM, we don’t just focus on work—we focus on balance. We encourage a life-work approach that allows our team to thrive both personally and professionally. We are committed to helping our team members grow, stay curious, and work collaboratively to tackle any challenge. With the support of peers, managers, and executive leadership, our team is equipped to succeed and build meaningful careers.

The above statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhausted list of all responsibilities, duties and skills required.

Tradesman/Journeyman Plumber

Bacon Plumbing, Heating, Air & Electric is seeking a skilled tradesperson/Journeyman Plumber responsible for installing, maintaining, repairing and inspecting plumbing systems in commercial, industrial and/or residential settings. You will work independently as well as with a team, ensuring code compliance, safety, quality workmanship and excellent customer service.

Key Responsibilities

• Install, assemble, and maintain plumbing systems (water supply lines, waste and vent systems, fixtures, equipment such as water heaters, boilers, etc.).
• Read and interpret blueprints, building plans, plumbing diagrams, and specifications to determine work procedures.
• Measure, mark, cut, thread, bend, and join piping (copper, steel, PVC, PEX, etc.) using the appropriate tools and methods (e.g., solder, brazing, welding, solvent weld).
• Install, repair or replace plumbing fixtures such as sinks, tubs, showers, toilets, urinals, water fountains, etc.
• Locate and mark pipe system layouts, core or cut openings in walls/floors as needed for routing pipes and connections.
• Perform inspection and testing of plumbing systems for leaks, proper flow, pressure, etc., and make corrections as required.
• Maintain and repair drainage, venting, water lines, gas piping (if applicable) and other plumbing infrastructure.
• Supervise or assist apprentices or helpers as needed (depending on job site/team).
• Ensure adherence to local, state and national plumbing codes, safety regulations, and company policies (including OSHA and other safety standards).
• Maintain tools, equipment and company vehicles in good working order.
• Maintain documentation of work performed, materials used, and job progress (work orders, parts requisitions, time sheets).
• Be available for scheduled on-call, emergency repair work, or after-hours work as required (depending on employer).

Qualifications:

• Valid and active Journeyman Plumber License issued by the Texas State Board of Plumbing Examiners (TSBPE) or equivalent.
• Industry related knowledge and experience
• Good communication and customer service skills;
• Proven sales experience in business to consumer home services sales
• A progressive career path with home services trades experience
• Strong knowledge of plumbing tools, materials, fittings, and accepted practices.

Benefits

Bacon offers the following benefits in order to achieve a happy and healthy team culture together:

• Medical
• Dental
• Vision
• 401k with match
• Life Insurance
• PTO and paid holidays

Job Type: Full-time

Pay: Competitive salary + Bonus eligibility

Work Location: In person

Senior Project Manager – Process Mechanical (Raleigh, NC)

Supporting a full-service industrial contractor specializing in mechanical, hygienic piping, HVAC, and electrical/instrumentation trades serving life sciences, advanced manufacturing, and food & beverage industries from design through execution, while prioritizing safety, quality, and client satisfaction.

We are seeking a Senior Project Manager to join the Process team in Raleigh, NC. This role offers an entrepreneurial environment where your leadership drives the success of multiple, large-scale projects simultaneously.

Responsibilities

• Manage fabrication and installation of process piping, utility piping, HVAC, plumbing, structural steel, equipment setting, and medical gas systems.
• Champion safety and enforce standards in healthcare, industrial, and bio-pharma environments.
• Review estimates and establish job costing systems for labor, materials, and subcontractors.
• Negotiate and manage vendor/subcontractor agreements; ensure compliance with contract specifications.
• Conduct monthly cost reviews and progress reports to ensure projects stay on time and on budget.
• Build strong relationships with clients, general contractors, subcontractors, vendors, and internal teams.
• Oversee all aspects of project planning and execution, including pre-planning meetings, scheduling, site visits, quality control, cost tracking, and change management.
• Troubleshoot installation issues and maintain client satisfaction.

Qualifications

• 10+ years of project management experience in process mechanical subcontracting (process piping, HVAC, plumbing, structural steel, equipment setting).
• Proven success managing projects of $5M or more.
• Bachelor’s degree in engineering, construction management, or equivalent experience.
• Strong planning, organizational, and technical skills.
• Proficiency in Microsoft Office and project management software.
• Excellent communication, leadership, and mentoring skills.
• Creative problem-solving and root cause analysis capabilities.
• Ability to travel approximately 30% per month.

Benefits

• Professional development and continuous learning
• 401(k)
• Health, dental, and vision insurance
• Paid time off (PTO)

Position Summary:

Petrosmith, a trusted leader in the oilfield manufacturing and services industry, seeks an experienced and driven Senior Estimator to join our dynamic team. The Senior Estimator with support our Sales team in developing accurate, timely, and competitive cost estimates for engineered production and process equipment used in upstream and midstream oil and gas applications as well as other liquid and gas processing applications. This position is critical in ensuring the technical and commercial viability of our proposals. The ideal candidate will have hands-on experience with pressure vessels and skidded, packaged systems, along with a solid understanding of engineering and manufacturing practices.

Essential Job Functions:

• Provides accurate cost estimating services for incoming quotes regarding tanks, pressure vessels, piping, skids, controls, instrumentations and other custom-engineered equipment.
• Analyze RFQs, specifications, and drawings to determine scope, materials, labor, and timelines.
• Interpret and modify Piping and Instrumentation Diagrams (P&IDs) and Process Flow Diagrams (PFD).
• Collaborate closely with Sales, Engineering, and Manufacturing to ensure accurate and feasible estimates. Interpret and incorporate customer requirements and industry standards into estimates.
• Utilize Infor Syteline ERP system for BOMs, costing, and quote tracking (preferred).
• Maintain estimation documentation and support continuous improvement in estimating processes. Maintain and update the parts library, ensuring component pricing and specifications are current.
• Review and apply technical knowledge of pressure vessels, piping, and modular equipment packages.
• Support the Sales team with technical input during customer discussions and negotiations
• Cost Analysis: Develop, assemble, and submit detailed and competitive bid packages in strict accordance with client requirements and deadlines. Analyze historical data, unit costs, and labor productivity to identify trends, refine estimating standards, and improve bid accuracy.
• Value Engineering: Participate in value engineering efforts, providing alternative cost solutions, methods, and approaches to optimize profitability and meet client needs.
• Continuous Improvement: Contribute to the ongoing development and refinement of estimating tools, databases, and best practices to drive efficiency and accuracy.
• Mentorship and Training: Support the professional development of junior estimators and project staff through knowledge-sharing, coaching, and training initiatives.
• Reporting: Maintain detailed records of all estimate assumptions, pricing, and supporting data for internal review and audit purposes.
• Market Intelligence: Stay informed on industry trends, cost escalations, new technologies, and competitor capabilities to enhance the competitiveness of Petrosmith’s bids.

Qualifications:

• Bachelor’s degree in Engineering, Construction Management, Project Management, or Business Administration, or a related field preferred; extensive relevant experience will be considered in lieu of degree.
• Minimum of 7 years’ progressive estimating experience in water filtration systems, oilfield surface product manufacturing, fabrication, or industrial construction environments, with a proven track record of successful project bids.
• Strong background in pressure vessels, ASME codes, and skidded/process systems.
• Working knowledge of ASME pressure vessel and piping codes.
• Proficiency with MS Office software and specifically MS Excel.
• Familiarity with Compress (pressure vessel design software) is highly desirable.
• Experience with water treatment equipment is a plus.
• Understanding of engineering drawings, P&IDs, and mechanical design standards.
• Proficiency in ERP systems; Infor Syteline experience is a plus.
• Excellent communication, analytical, and problem-solving skills.
• High attention to detail and ability to manage multiple estimates under tight deadlines.
• The ability to work both independently and as part of a team is essential.
• Ability to prioritize workload, work independently, and manage multiple assignments in a fast-paced, deadline-driven environment.
• High professional integrity, discretion, and ethical approach to confidential and proprietary information.
• Proficiency in advanced estimating and project management software (e.g., Sage Estimating, ProEst, PlanSwift, Bluebeam, MS Project, or similar tools).

Other Skills / Abilities:

Highly skilled professional with wide-ranging, advanced technical experience to resolve

Complex issues.

Competent to work at very high level in multiple knowledge areas of functions as an advanced

Contributor.

Work Environment & Physical Demands

Physical demands: While performing the duties of this job, the employee is required to walk;

Sit; use hands to finger, handle objects, tools or controls; reach with hands and arms; balance; stoop; talk or hear. The employee may occasionally lift and/or move up to 50 pounds waist high.

Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to focus.

Work Environment: While performing the duties of this job, the employee is exposed to ambient room temperatures, lighting and traditional office equipment as found in a typical office.The noise level in the work environment will required hearing protection when in the manufacturing shops.Frequently employee may need to engage manufacturing workers in their work environment.

Role: Service Millwright

Location: 256 Samuel Barnett Boulevard, New Bedford, MA 02745

Department: Maintenance & Facilities – Ball Plant II

Type: Full-Time

Shifts: WECA – Fri 10:50 PM–11:00 AM & Sat 10:50 AM–11:00 PM + 1–2 weekday shifts (Ball Plant II)

What You Will Be Doing

As a Service Millwright, where you’ll play a key role in keeping our operations running smoothly. You’ll be responsible for maintaining, rebuilding, and repairing machinery, as well as fabricating parts and servicing piping systems for steam, air, oil, water, and hydraulics. This role is ideal for someone with strong mechanical skills, welding experience, and a passion for hands-on problem-solving. If you're ready to take your trade to the next level in a fast-paced, team-oriented environment, we want to hear from you.

What You Bring

Minimum 3 years of experience maintaining and repairing industrial machinery

Must provide own trade-related tools

Skilled in designing, cutting, threading, bending, fitting, and assembling pipe systems from instructions or blueprints

Proficient in troubleshooting, maintaining, rebuilding, and repairing machinery

Experienced in fabricating and welding equipment and parts

Able to service and replace piping for steam, air, oil, water, and hydraulic systems, valve repair experience a plus

Strong communication, teamwork, and interpersonal skills

Solid analytical and problem-solving abilities

Thorough knowledge of mechanical production equipment

Pipe fitter’s license is a plus

This is more than just a modeling job—it is your gateway to becoming a specialist in Advanced Semiconductor Chemical & Gas Delivery Systems. While you contribute your 1-2 years of site experience, we will provide the platform for you to master the complex logic behind high-purity piping, automated delivery, and international safety codes. You will transition from "building models" to "designing critical infrastructure" for the world's leading tech fabs.

General Responsibilities:

• Architectural & System Modeling: Develop and prepare high-precision 3D architectural and MEP designs using Revit and AutoCAD.
• Integrated Coordination: Collaborate with engineers and PMs to ensure design accuracy, ensuring all process requirements are met.
• Design Evolution: Proactively review and update models to reflect real-time design changes and field adjustments.
• Conflict Resolution: Perform Clash Detection and lead the reporting/solving of spatial discrepancies to ensure a seamless build.
• Team Leadership: Participate in technical meetings and provide progress updates to stakeholders.

Specialized Knowledge & Growth

• P&ID Translation: Read and interpret P&IDs/PFDs (Piping and Instrumentation Diagrams) to align 3D models with functional process logic.
• Subcontractor Management: Act as the technical bridge, communicating 3D model requirements to subcontractors for onsite coordination.
• Advanced System Learning: Gain deep-dive knowledge in Chemical Delivery Systems (CDS) and Gas Delivery Systems (BDS) specifically for advanced semiconductor nodes.

Qualification:

• Minimum Associate Degree in a related engineering or architectural field.

Must Have:

• Software Mastery: Proficiency in BIM software (Revit) and AutoCAD.
• Industry Experience: 1–2 years of experience in design-related work, preferably within the semiconductor or high-tech

Nice to Have:

• Process Piping: Experience with specialized materials like CPVC/PFA, SUS/PFA, and SUS/SUS piping design.
• Electrical & Control: Knowledge of Power/Control system design, including Tray, Conduit, and RSG layouts.
• Standards & Codes: Familiarity with NEC or ASME codes is a significant plus.
• Project Context: Previous involvement in Gas/Chemical-related projects.

What You Will Learn & Achieve

• Semiconductor Expertise: Master the design logic of supply systems that power the world's most advanced chip manufacturing.
• Professional Elevation: Move beyond 3D modeling into Digital Engineering, learning how to manage complex data within a BIM environment.
• Cross-Domain Skills: Gain exposure to mechanical, chemical, and electrical integration, making you a highly versatile asset in the global semiconductor talent market.

Lead Projects that Matter. Build a Career That Inspires. At InServ, our core value is simple: People, First. We prioritize our teammates and empower you to bring your unique insights and ideas to work every day. If you’re ready to take ownership of complex industrial projects and make a real impact, this is your opportunity.

We’re looking for a Senior Project Manager to join our Process Services team: a collaborative, entrepreneurial environment where your leadership drives success. In this role, you’ll be responsible for advancing the development, strategy and lifecycle management of multiple projects simultaneously. Your leadership will ensure successful project outcomes measured by profitability, labor efficiency, safety performance, equipment utilization, cash flow, and quality standards, all reflected in exceptional client satisfaction.

WHAT YOU'LL DO:

• Manage fabrication and installation of Process Piping, Utility Piping, HVAC, Plumbing, Structural Steel, Equipment Setting, and Medical Gas systems to ensure they’re on time, on budget, and to code.
• Champion safety for Healthcare, Industrial, and Bio-Pharma facilities. Enforce safety standards through meetings, investigations, and employee engagement.
• Review estimates and establish job costing systems for labor, materials, and subcontractors.
• Negotiate and prepare vendor/subcontractor purchase orders; review submittals for compliance with contract specifications.
• Conduct monthly cost reviews and progress reports to identify deviations early and ensure timely, budget-compliant delivery.
• Build and maintain strong relationships with general contractors, subcontractors, vendors, and internal teams.
• Oversee all aspects of project planning and execution, including customer meetings for pre-planning, estimating and scheduling, site visits and quality control and cost tracking and change management.
• Prepare and submit purchase orders, accounts payable, and billing promptly.
• Troubleshoot installation issues and maintain client satisfaction.

WHAT WE'RE LOOKING FOR:

• 10+ years of project management experience in process mechanical subcontracting (Process Piping, HVAC, Plumbing, Structural Steel, and Equipment Setting).
• Proven success managing large-scale projects ($5M+).
• Bachelor’s degree in engineering, construction management, or equivalent experience.
• Demonstrated planning and organizational abilities to manage multiple projects.
• Excellent verbal and written communication skills.
• Technical proficiency in relevant disciplines.
• Ability to conduct site visits and review job cost reports for effective project control.
• Proficiency in Microsoft Office and project management software.
• Leadership, coaching, and mentoring capabilities.
• Creative problem-solving and root cause analysis skills.
• Strong negotiation and conflict resolution abilities.
• Flexibility to adapt to changing priorities and conditions.

Travel: Approximately 30% per month, depending on project needs.

Pay range and compensation package:

• Competitive pay that rewards your impact
• Professional development and continuous learning opportunities
• 401(k)
• Health, Dental and Vision Insurance
• Paid Time Off (PTO)
• Tuition reimbursement

Company Overview:

Founded in 1992, InServ is a full-service industrial contractor serving the life sciences, advanced manufacturing, and food and beverage sectors. We specialize in mechanical, electrical and instrumentation, hygienic piping and HVAC trades. Operating from multiple locations across North Carolina, we serve clients throughout the Southeast. Our success is built on an unwavering commitment to safety, quality, and schedule adherence.

Equal Opportunity Statement: InServ is proud to be an equal opportunity employer committed to building a diverse and inclusive workforce. We consider all qualified applicants without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other characteristic protected by law.