Jk Rules Jobs in Usa
2,092 positions found — Page 13
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Adheres to express lube guidelines.
Performs lube, oil and filter changes by draining and replacing oil and filter, and lubricating all joints, including idler arm steering knuckles, tie rods ends and ball joints.
Reports all necessary repairs to service advisor.
Installs completed LOF reminder sticker in vehicle.
Checks battery, tire air pressure, windshield fluid, transmission fluid and power steering fluid levels and refills as needed.
Checks coolant level and refills as necessary.
Ensures that vehicle is clean and free of fluid residue or fingerprints.
Checks fluid level prior to release of vehicle to ensure proper levels.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Basic knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
#CB Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Responsibilities: The Maintenance Mechanic tends to production machines such as filler, packaging, cappers, labeler, and palletizers used for bottling water.
This position will perform trouble shooting and repairs to equipment as needed.
Essential Job Duties: Operates all production machinery in accordance with attached specifications Operates all blow mold machinery in accordance with attached specifications Carries a radio at all times while on shift to be fully accessible to team Carries a tool bag with all required tools at all times while on shift Leads team in changeover processes Leads team in preventative maintenance process Performs basic cleaning of machinery Proficient in blow mold operations Performs all repair tasks and troubleshooting necessary to keep bottling lines operating efficiently Ability to rotate as needed Assist in training of new employees Ensures through constant observation and routine inspections that high quality product is being produced Ensures that proper GMP rules and cleanliness is being administered throughout production processes Reports all emergencies, injuries, and production incidents immediately to shift supervisor GMP & PPE Required: While on the production floor in the plant you will be required to follow and help to enforce all GMP regulations in the plant.
Anyone entering the production floor must follow the GMP rules in their employee handbook, which includes the required hairnets, beard nets, and earplugs.
It is also required that all personnel wear safety glasses.
Follows standard operating procedures including quality checks and procedures for all operations.
Meets food safety and quality objectives and the requirements of the SQF System.
Non-Essential Job Duties Will perform other related work as assigned by the Manager.
In the absence of this employee, the direct manager or appointee will cover responsibilities.
- Friday
- 2nd Shift (Afternoon/Evening) Pay: $20.00/hour plus $1.50 shift diff Shift: 2nd Shift Monday-Friday, 3pm-11:30pm Location: Westpoint Blvd Clerical II The Clerical II performs clerical work requiring the application of various work methods and procedures, along with familiarity with departmental functions, policies, and practices.
Primary Responsibilities Process incoming mail and complete filing using the established filing system.
Check, analyze, and organize materials; conduct limited record searches when necessary.
Index records and information, maintaining the current filing system.
Post to various department records and prepare reports involving tabulations, posted data, and basic math calculations.
Receive and issue receipts for payments related to licenses, permits, certificates, bonds, and services.
Issue licenses, permits, certificates, and other legal documents or titles in accordance with departmental rules and regulations.
Calculate, prepare, and issue bills for documents or services.
Demonstrate thorough understanding and adherence to safety rules, regulations, and reporting requirements.
Rely on limited experience and judgment to plan and accomplish tasks.
Assist other department employees with completion of more complex assignments.
Work under general supervision.
Perform other duties as assigned or requested.
Education / Experience High school diploma or equivalent education and 2--4 years of relevant experience.
Excellent verbal and written communication skills.
Customer service driven.
Strong team player.
Requirements, Perks, and Benefits (US -- Non-Exempt) Physical & Cognitive Requirements (With or Without Accommodation) Ability to follow policies and procedures Ability to read, write, and interpret information Ability to add, subtract, multiply, and divide Ability to use hands to finger, handle, or feel Ability to sit, walk, or stand for the duration of the shift Must possess visual acuity to perform essential job functions Ability to conduct physical tasks with a full range of motion throughout the warehouse environment Ability to lift/carry items up to 50 pounds Equal Opportunity Employer FedEx Supply Chain, Inc.
is an Equal Opportunity Employer, including veterans and individuals with disabilities.
Know Your Rights Pay Transparency Family and Medical Leave Act (FMLA) Employee Polygraph Protection Act E-Verify Program Participant Federal Express Corporation participates in the Department of Homeland Security U.S.
Citizenship and Immigration Services' E-Verify program (for U.S.
applicants and employees only).
Please click below to learn more: E-Verify Notice (bilingual) Right to Work Notice (English) / Spanish FedEx Supply Chain is committed to providing access, equal opportunity, and reasonable accommodation for qualified individuals with disabilities in its application procedures, hiring, and other terms and conditions of employment.
To request a reasonable accommodation, please contact .
Perks and Benefits at FedEx Supply Chain (FSC) Competitive Pay: Competitive wages depending on your location and experience, paid bi-weekly for both full-time and part-time opportunities.
401(k) plan with company match after 1 year Tuition reimbursement program Holiday pay and accrued paid time off (Vacation and PTO) Medical, dental, vision, and voluntary benefits available on day one Basic life insurance Basic AD&D coverage Supplemental Life and Supplemental AD&D Short-Term and Long-Term Disability (for full-time employees after 180 days of service) Paid parental leave for both moms and dads Paid bereavement and jury duty Job Disclaimer (US) Please note that this job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
The Company reserves the right to modify duties or assign additional responsibilities as necessary to meet business needs.
The Porter will perform various tasks and errands for the dealership.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Moves cars.
Delivers cars to customers.
Keeps car lot clean and orderly.
Runs various errands for the dealership.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous work experience desired.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
Work includes frequent movement around the dealership facilities and the outdoor car lot and movement in and out of cars.
While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to stand; walk; and sit.
Environment Demands: Duties are performed throughout the dealership, both indoors and outdoors and off dealership premises.
Due to the nature of the position, may be exposed to various work environments and required to perform a range of tasks.
Regularly interacts with employees from various departments in the dealership and has some contact with customers.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Date Posted:
2026-02-13Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
Design layouts include Rigid, Flex, and Rigid-Flex assemblies
Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind
Qualifications You Must Have:
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
Experience with the electrical design process including RF layout
Experience with laying out Rigid, Flex, or Rigid-Flex boards
Experience with multi-layer board design
Qualifications We Prefer:
Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
Export manufacturing data in both Gerber and ODB++ formats
Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
Able to understand and interpret drawings as they relate to PCB’s and CCA’s
Familiarity with IPC 6012 & IPC 6013
Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
Active Secret DoD security clearance
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
#LI-CV1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-13Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
This position is an onsite role, located in Tucson, AZ.
What You Will Do:
Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
Design layouts include Rigid, Flex, and Rigid-Flex assemblies
Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind
Qualifications You Must Have:
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
Experience with the electrical design process including RF layout
Experience with laying out Rigid, Flex, or Rigid-Flex boards
Experience with multi-layer board design
Qualifications We Prefer:
Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
Export manufacturing data in both Gerber and ODB++ formats
Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
Able to understand and interpret drawings as they relate to PCB’s and CCA’s
Familiarity with IPC 6012 & IPC 6013
Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
Active Secret DoD security clearance
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
This position offers relocation based on candidate eligibility.
Learn More & Apply Now!
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
#LI-CV1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Responsible for scheduling service to be performed.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Greets customers in the service drive area and assists them with the process of checking vehicle in for service.
Assists Service Advisor by working with customer and technician to identify required maintenance.
May advise customers on necessary and recommended services.
May offer additional services and repairs to customers.
Assists with moving vehicles.
Assists customers with reviewing documentation, processing payment, and returning keys for completed services.
Schedules appointments with customer.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous experience in automotive or customer service industries desired.
Basic knowledge of the mechanical operations of vehicles.
Excellent interpersonal, customer service, and organizational skills.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate skills in Microsoft Office products.
Ability and knowledge of the Dealership Management System and other web based applications utilized for operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this Job, the employee is regularly required to talk or hear.
The employee is frequently required to stand; walk; and sit.
May be exposed to load noise, vibration, exhaust fumes, and other service repair conditions.
Environment Demands: Duties are generally performed in the service area.
Responsibilities may include conducting road tests on customer vehicles.
Work includes inspection of customer vehicles and frequent movement around the Service Department to convey information between customers and service technicians.
Frequently interacts with customers, service manager and service technicians, and employees from various departments in the dealerships.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
- 5 PM | Pay: 35/hr Position Summary The Supply Planner is responsible for managing end to end supply chain planning activities while maintaining strong partnerships with Commercial organizations, Business Groups, Manufacturing teams, and suppliers.
This role ensures product availability, accurate planning data, and optimal inventory levels through proactive analysis, scenario planning, and execution of key supply chain and production planning processes.
Responsibilities End-to-End Supply Planning Manage relationships with Commercial teams, Business Groups, Manufacturing teams, and suppliers to ensure seamless supply chain operations.
Maintain accurate master data in SAP and JDA/BlueYonder systems to support rule based planning.
Execute PDLM phase in/phase out planning activities.
Lead the monthly S&OP Supply Review, defining and reviewing mid and long term supply plans.
Master Production Schedule (MPS) & Detailed Scheduling Plan, control, and maintain the short term Master Production Schedule (MPS), balancing customer demand and inventory levels.
Collaborate with Production Planners to ensure a feasible and constrained MPS, taking into account equipment and labor capacity.
Support creation of weekly simulation versions of the MPS/DPS for scenario evaluation.
Align with Operations/Production teams to minimize changeover times and maintain optimized production sequences.
Capacity & Constraint Management Identify capacity constraints during MPS creation and communicate issues proactively to Production Planning teams.
Evaluate constrained MPS outputs against installed production capacity to ensure feasibility.
Material Requirements & Inventory Support Support MRP processes by ensuring accurate demand signals flow into production scheduling.
Coordinate with operational buyers and factory planning teams on material shortages, planned orders, and replenishment triggers.
Monitor stock levels for finished, semi finished, and raw materials to ensure alignment with production needs.
Production Planning Review weekly frozen week production schedules jointly with production and OMM teams and ensure updates are accurately reflected in SAP.
Ensure production plans are feasible based on latest constraints and fully synchronized with upstream demand and downstream commitments.
Allocation & Risk Management Make allocation proposals when the order book exceeds production capacity or material availability.
Perform scenario mapping and root cause analysis to mitigate supply and production risks.
Build allocations and constraint based strategies that protect customer service levels.
Operational Excellence Drive key performance indicators such as CSL Availability, CSP, SRM, SRMS, DPMA, and inventory health metrics (inventory as % of MAT sales, excess & aging stock).
Support factory level KPIs including CLIP, LAP, MIP, and PIPO execution.
Support Blueheart/BlueYonder manual PO process during transition to automation.
Qualifications Education & Experience Bachelor’s degree in Supply Chain, Industrial Engineering, Operations, Business, or related field; Master’s preferred.
3–5+ years in supply planning and production planning roles with exposure to S&OP, MPS, PDLM, and PIPO processes.
Technical Skills Proficiency in SAP for MPS, MRP, routing, and production schedule alignment.
Experience with JDA/BlueYonder for advanced rule based supply and production planning.
Strong Excel and data visualization skills.
Ability to support manual PO workflows during system transitions.
Planning Expertise Experience generating or supporting constrained and unconstrained MPS cycles and evaluating capacity fit.
Skilled at integrating production schedules with supply plans, ensuring smooth alignment between demand, supply, and factory operations.
Ability to lead S&OP supply reviews and represent supply plans in cross-functional forums.
Analytical & Problem Solving Strong capability in scenario planning, root cause analysis, and constraint based decision making.
Demonstrated ability to improve operational KPIs such as CLIP, LAP, MIP, and PIPO.
Stakeholder Collaboration Works effectively with Production Planning, OMM, Operations Management, OEM suppliers, and Commercial & Business Groups.
Able to communicate capacity risks, supply scenarios, and production impacts clearly in S&OP and SteerCo meetings.
Responsible for scheduling service to be performed.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Works with customer and technician to identify required maintenance.
Advises customers on necessary and recommended services.
Offers additional services and repairs to customers.
Computes cost of replacement parts and labor to restore vehicle to condition specified by customer.
Estimates cost of mechanical, electrical, or other repairs.
Enters itemized estimate on service order and explains estimate to customer.
Schedules appointments with customer.
Meets dealership’s standards for repair and order production.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years √ 3-5 years o 5+ years Education/Experience: Previous experience in automotive or customer service industries.
Working knowledge of the mechanical operations of vehicles.
Excellent interpersonal, customer service, and organizational skills.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate skills in Microsoft Office products.
Ability and knowledge of the Dealership Management System and other web based applications utilized for operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this Job, the employee is regularly required to talk or hear.
The employee is frequently required to stand; walk; and sit.
May be exposed to load noise, vibration, exhaust fumes, and other service repair conditions.
Environment Demands: Duties are generally performed in the service area.
Responsibilities may include conducting road tests on customer vehicles.
Work includes inspection of customer vehicles and frequent movement around the Service Department to convey information between customers and service technicians.
Frequently interacts with customers, service manager and service technicians, and employees from various departments in the dealerships.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Examines body damage on customer vehicles Identifies necessary body repair work Estimates cost of body work Requests necessary parts Performs body repairs including removing damaged body parts and replacing with fixed or new parts Documents repairs performed Performs body repairs efficiently and according to Collision Center and insurance company guidelines Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years o 3-5 years √ 5+ years Education/Experience: Demonstrable knowledge of body repair methods.
Collision Center repair training or commensurate experience.
Ability to operate equipment necessary to perform Collision Center repair functions.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic Computer skills to utilize timekeeping system.
Ability to learn parts department computer inventory and ordering system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to 80 pounds.
While performing the duties of this job, the employee is regularly required to hear and talk; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Must pass OSHA respiratory medical exam.
Environment Demands: Duties are performed primarily in the Collision Center.
Work includes movement of vehicle body parts, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, paint-dust, and other collision center conditions.
Frequently interacts with customers, Estimators, and Collision Center management.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
