Jabil Jobs in Usa

How will you make an impact?

- Under limited supervision, develops and maintains test procedures, tester hardware, and software for electronic circuit board production.

What will you do?

- Review circuit board designs for testability requirements.
- Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
- Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
- Generate reports and analysis of test data, prepare documentation and recommendations.
- Review test equipment designs, data, and RMA issues with customers regularly.
- Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
- Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
- Determine conditions under which tests are to be conducted and sequences and phases of test operations.
- Direct and exercise control over operational, functional, and performance phases of tests.
- Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
- Analyze and interpret test data and prepare technical reports for use by test engineering and management personnel.
- Develop or use computer software and hardware to conduct tests on machinery and equipment.
- Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
- May provide training in new procedures for production testing staff.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.

How will you get here?

- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Physical Demands:

- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs.
- Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

Work Environment:

- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
- Individual’s primary workstation is in the office area, with some time spent each day on the manufacturing floor.
- The noise level in this environment ranges from low to moderate.

Education:

- Bachelor of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

Experience:

- Direct L10, L11, and L12 test expertise, strong Linux programming skills, and solid knowledge of GPU/CPU systems, understanding of cloud platforms and driving high-quality testing and technical excellence in a manufacturing test performance floor.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

- 401K Match

- Employee Stock Purchase Plan

- Paid Time Off

- Tuition Reimbursement

- Life, AD&D, and Disability Insurance

- Commuter Benefits

- Employee Assistance Program

- Pet Insurance

- Adoption Assistance

- Annual Merit Increases

- Community Volunteer Opportunities

How will you make an impact?
This onsite opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes.

Location/Division Specific Information: Elmira, NY – Engineering Technician II – CNC Programmer. Jabil Elmira is a manufacturing and assembly facility where employees build, test, inspect, and support the production of various products. It includes engineering, quality, materials, and production operations typical of a Jabil manufacturing site.

What will you do?

- Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment.

- Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes.

- Performs measurement of parts using manual gaging and automated methods.

- Uses data driven decision making for CNC program corrections and improvements.

- Participates in creation of machine requirements for modifications and new builds.

- Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities.

- Participates in cutting tool selection, custom cutting tool design, sourcing and testing.

- Participates in tool holder selection, fixture selection, fixture design, sourcing and testing.

- Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles.

- Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements.

- Provides input on creative ways to reduce costs by streamlining processes and systems.

- Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making.

- May perform other duties and responsibilities as assigned.

How will you get here?

Education and Experience

- Associate’s degree preferred; or minimum of two years related experience and/or training

- High School Diploma or GED preferred not required or equivalent experience

- Minimum of 2 years of CNC programming experience.

Knowledge, Skills, Abilities

- Experience with troubleshooting machine mechanical systems required.
- Experience with technical drawings, geometric dimensioning and tolerancing required.
- Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.).
- Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) – Fanuc and/or Siemens desired
- Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desire
- Strong computer skills including Microsoft Office, specifically Word and Excel.
- Ability to prioritize work-schedules and coordinate multiple tasks.

Additional Job Requirements

- Supports and operates in a proactive, safe, climate-controlled environment

- Mix of sitting and standing with up to 7 hours per day standing.

- Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds.

- Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed.

- Standard working hours apply with potential for overtime as needed.

- Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.

Job Title: Principal Mechanical Integration Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact? 

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

What will you do?

- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.

- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.

- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.

- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.

- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.

- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.

- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).

- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.

- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.

- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.

- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.

- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.

- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.

- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.

- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

MINIMUM QUALIFICATIONS

Education: 

- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

Experience: 

- 8 years' experience in mechanical design and integration of mission-critical systems.

- Proven track record of successful system designs and implementations in a relevant industry

- Strong understanding of mechanical systems, integration strategy, and system coordination

- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.

- Excellent problem-solving skills and attention to detail

- Strong communication and teamwork abilities

PREFERRED QUALIFICATIONS

- Master’s Degree in Mechanical Engineering

- Professional Engineer (PE) License

JOB SUMMARY

Oversee production processes and assists Supervisor in establishing production priorities for products in keeping with effective operations and cost factors.

***Hands-on experience and knowledge of Surface Mount Technologies (SMT) and Thru-hole equipment/gear.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Confers with management personnel to establish production and quality control standards. Also assists in obtaining data regarding types, quantities, specifications, and delivery dates of products ordered. Helps to minimize excessive material on production floor.
· Assists in the coordination of production activities with procurement, maintenance, and quality control activities to obtain optimum production and utilization of human resources, machines, and equipment.
· Reviews and discusses production, quality control, maintenance, and operational reports to determine causes of nonconformity with product specifications, and operating or production problems with production supervisors.
· Assists in the minimization of scrap and materials request order (MRO) usage. Ensures that each workstation has a clean operating area. Assists in the implementation of operating methods and procedures designed to eliminate operating problems and improve metrics.
· Monitors all production metrics and completes monthly “report card”. Seeks continued improvement in lowering line and plant defects per million (DPM).
· Ensures that line employees read, understand and adhere to appropriate policies and procedures. Ensures proper stocking and availability of operation supplies and equipment.
· Assists in monitoring the SPC system to fix repetitive and recognize problems immediately. Compiles, stores, and retrieves production data.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Strong knowledge of global and regional logistics operations and industry.
· Strong proficiency in determining logistics requirements to enable company’s business goals and objectives with ability to devise and implement strategy to achieve targets.
· Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum company footprint.
· Strong knowledge of international direct and indirect taxes as well as global customs regimes.
· Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.
· Strong and convincing communication skills.
· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

EDUCATION & EXPERIENCE REQUIREMENTS

· Bachelor’s degree or equivalent preferred.
· At least 2 years experience.
· Or a combination of education, experience and/or training.

Position Summary:

We are seeking a skilled and safety-conscious Copper Brazing Technician to join our manufacturing team. This role is responsible for performing precision brazing of copper components, interpreting blueprints, operating torches (Oxygen/Acetylene), and ensuring high-quality standards in product assembly. The technician will follow controlled brazing procedures/work instructions, maintain required documentation/traceability, and support leak/pressure testing and rework verification as part of production builds.

Key Responsibilities:

- Join copper components by heating them and applying filler metal to create strong, leak-proof bonds.
- Interpret blueprints and written instructions to ensure accurate assembly and placement of copper parts.
- Operate single- and dual-tip torches safely and effectively, maintaining precise heat control throughout the brazing process.
- Clean, prepare, and assemble copper pipes and fittings prior to brazing.
- Follow strict safety procedures, including proper handling of compressed gases and maintaining a safe, organized workspace.
- Operate and monitor brazing furnaces and other related equipment as needed to support production.
- Assist with basic equipment maintenance and promote good housekeeping practices in your work area.
- Apply fluxing techniques to chemically remove oxides, provide a protective barrier against atmospheric gases, and facilitate the flow and wetting of filler metals.
- Monitor joint temperature visually during brazing.
- Utilize induction heating as an alternative method when appropriate.
- Follow documented brazing procedures/work instructions, complete travelers, and record in-process/finish inspection results.
- Maintain cleanliness of tubing/lines (cap/plug open lines as required) and prevent contamination/foreign material during assembly.
- Set up and perform dry nitrogen purge during brazing when required to minimize internal oxidation/scale and maintain internal cleanliness.
- Select and use appropriate filler metals, fluxes, and joint configurations based on drawings/specifications and approved processes.
- Support pressure/leak testing per specification; troubleshoot leaks/defects, perform approved rework, and verify repair effectiveness.
- Troubleshoot brazing defects (e.g., porosity, lack of fill, overheating, pinholes) and support root-cause/corrective action with Quality/Engineering.
- Use approved temperature indicators and measurement tools (e.g., temperature crayons/IR thermometer/fixtures) when required to ensure repeatable joints.
- Comply with site hot-work controls (e.g., hot-work permits, ventilation, and fire-watch requirements) as applicable.

Essential Skills & Knowledge:

- Brazing Techniques: Solid understanding of copper brazing processes and applications (3 years minimum).
- Torch Handling: Proficiency in using oxy-fuel and other torches with precision (3 years minimum).
- Blueprint Reading: Ability to interpret technical drawings and specifications.
- Metallurgy: Knowledge of metal properties to ensure proper bonding and joint integrity.
- Fluxing Knowledge: Understanding of flux behavior and its role in joint preparation and filler metal flow.
- Induction Heating: Familiarity with induction brazing equipment and its safe operation.
- Safety Awareness: Strong commitment to safety procedures and proper use of equipment.
- Attention to Detail: Meticulous work habits to ensure high-quality, leak-proof joints.
- Manual Dexterity: Fine motor skills for handling small parts and performing intricate tasks.
- Qualification/Certification: Must be able to qualify and maintain brazer qualification to ISO 13585:2012 (or equivalent) per company procedure, as required for the product/process.
- Process Discipline & Documentation: Ability to follow controlled procedures/work instructions and accurately complete travelers, inspection records, and traceability requirements.
- Cleanliness & Purge Practices: Understanding of internal cleanliness requirements and nitrogen purging practices for copper piping assemblies when specified.
- Leak Test & Rework Skills: Experience supporting pressure/leak testing, diagnosing failures, and executing approved repair/rework processes.
- Filler Metal/Flux Selection: Working knowledge of common copper brazing filler metals/fluxes and the impact of joint fit-up, heat input, and position on joint quality.
- Positional/Tight-Access Brazing: Ability to braze in multiple positions and within constrained assemblies while maintaining joint quality.

Preferred Certifications:

- AWS B2.2 (or equivalent) for brazing qualification.
- ISO 13585:2012 (or equivalent) brazing qualification.
- EPA Section 608 (preferred if the role interfaces with refrigerant circuits; or ability to obtain as required).

Preferred Experience:

- Experience in HVAC/R, industrial refrigeration, heat exchanger, or chiller manufacturing environments.
- Experience working in a regulated production environment requiring documentation, traceability, and defined acceptance criteria.

How will you make an impact?
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.

What will you do?

- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa

Experience:

- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks

Knowledge, Skills, Abilities:

- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs

What can Jabil offer you?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities

Apply Today!

Job Summary

The Quality Engineer II plays a key role in ensuring product and process quality throughout the product lifecycle. This position involves applying quality engineering principles to prevent defects, improve manufacturing processes, and maintain compliance with established standards.

Job Responsibilities

- Develop, implement, and maintain quality control plans and procedures for new and existing products.

- Conduct root cause analysis for product non-conformances and process deviations, implementing effective corrective and preventive actions (CAPA).

- Perform statistical analysis of quality data to identify trends, opportunities for improvement, and risks.

- Participate in design reviews, process validations, and manufacturing readiness reviews to ensure quality requirements are met.

- Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Supply Chain) to integrate quality into product development and production.

- Support internal and external audits, ensuring compliance with ISO standards, customer specifications, and regulatory requirements.

- Develop and deliver quality training to manufacturing personnel and other stakeholders.

- Review and approve engineering changes, ensuring their impact on product quality is assessed and controlled.

- Drive continuous improvement initiatives using methodologies such as Six Sigma, Lean Manufacturing, and FMEA.

- Document and report on key quality metrics and performance indicators.

Job Qualifications

- Bachelor's degree in Engineering (e.g., Mechanical, Electrical, Industrial, Manufacturing) or a related technical field.

- 3-5 years of experience in a Quality Engineering role within a manufacturing environment.

- Strong understanding of quality management systems (e.g., ISO 9001, AS9100, ISO 13485 depending on industry).

- Proficiency in statistical process control (SPC), measurement system analysis (MSA), and other quality tools.

- Demonstrated experience with root cause analysis methodologies (e.g., 8D, 5 Why, Fishbone diagrams).

- Excellent analytical, problem-solving, and decision-making skills.

- Strong communication and interpersonal skills, with the ability to effectively collaborate with diverse teams.

- Ability to read and interpret technical drawings and specifications.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

- ASQ certifications (e.g., CQE, CSSBB) are a plus.

Principal Program Manager: Data Center Infrastructure & Rack Integration

Based onsite in Austin, TX

Jabil is seeking a highly experienced and customer-facing Principal Program Manager to lead global Data Center Infrastructure & Rack Integration projects. This role is responsible for the end-to-end development, delivery, and lifecycle management of highly customized rack solutions and MDCs for hyperscale and enterprise customers. The ideal candidate will bring deep expertise in managing multi-million-dollar programs, coordinating global teams, and delivering scalable infrastructure solutions. The Principal Program Manager is a senior position in Program Management responsible for running large complex programs, including contingency planning and issue resolution.

What can you expect to do?

- Customer-Facing Program Leadership: Serve as the primary liaison for global cloud customers, leading cross-functional teams and external vendors to deliver tailored infrastructure solutions. Anticipates, meets and exceeds expectations by solving problems quickly and effectively, making customer satisfaction a priority.
- Modular Data Center Expertise: Manage the design, planning, assembly, configuration, testing, and global delivery of Modular Data Center solutions and other Data Center Infrastructure Programs.
- End-to-End Rack Integration: Manage the design, planning, assembly, configuration, testing, and global delivery of integrated rack solutions.
- Enterprise Cloud Solutions: Develop and deploy highly customized enterprise cloud infrastructure for large-scale customers, ensuring alignment with technical and business requirements.
- Global Coordination: Collaborate with engineering, supply chain, procurement, logistics, and multiple global integrator facilities to ensure seamless execution and customer satisfaction.
- Cross-Functional Team Management: Lead diverse teams across Production Operations, Procurement, Logistics, and Customer Care to fulfill infrastructure needs with timely execution and post-sales support.
- Technical Oversight: Coordinate and execute the design, build, and test of various rack configurations, ensuring quality, scalability, and performance standards are met.
- Operational Excellence: Drive continuous improvement in program execution, risk management, and operational efficiency across global integration centers. Responsible for program planning and scheduling, including the timing and resources required to deliver upon key milestones / deliverables and the implications from key interdependencies.

What is the experience needed to be successful in this role?

- Bachelor’s degree in Engineering, Business, or related field required; Master’s preferred.
- 12-15+ years of experience in program management in rack integration, modular data centers, or cloud infrastructure.
- Proven success in customer-facing roles managing large-scale, global programs.
- Proven ability to develop effective, matrixed, cross-organization programs and best practices, collaborating and communicating across business and technology stakeholders and multiple geographies.
- Deep understanding of MDC architecture, rack-level integration, and hyperscale cloud infrastructure.
- Strong leadership, communication, and stakeholder management skills.
- PMP or equivalent certification is a plus.

Benefits Package with Jabil

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities

JOB SUMMARY

Oversee, direct, and coordinate the maintenance, construction, and care of grounds, buildings, and building equipment.. Management of EHS Department to ensure the establishment health and safety policies and procedures which ensure compliance with company, customer, and government regulations within any of the following functions: health and safety, industrial hygiene, or environmental protection.

ESSENTIAL DUTIES AND RESPONSIBILITIES

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
· Recruit, interview and hire Maintenance Supervisor, Housekeeping Supervisor, and Environmental Health and Safety (EHS) personnel.
· Communicate criteria to recruiters for Maintenance, Housekeeping, and EHS position candidates.
· Coach Facilities and EHS staff in the interviewing/hiring process if required.
· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Facilities and EHS staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for the Facilities function.

Performance Management:
· Establish departmental goals and objectives in accordance with industry standards, and overall improvement / profitability of the company.
· Solicit ongoing feedback from peers and team member on team member’s contribution to the Facilities and EHS team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from staff.
· Assess communication style of individual team members and adapt own communication style accordingly.
· Influence organization to practice proper EHS procedures using marketing strategies and easy to use tools.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Business Strategy and Direction:
· Know and understand the campus strategic directions.
· Define, develop and implement Facilities and EHS strategies which will contribute to the campus strategic directions.
· Provide regular updates on departmental strategies to Operations Manager and peers.

Cost Management:
· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
· Management of capital budgeting, staffing and planning for Facilities Maintenance and EHS Management with regard to continuous improvement.
· Owner of continuous cost reductions for facilities operations including utilities, maintenance and consumables.
· Provide feedback to peers, and management staff on cost and cost trends.

Forecast Development and Accuracy:
· Prepare timely forecasts for the department.
· Compare forward forecast results to historical actual results for trend assessment and analysis.
· Provide feedback to management staff as required.

TECHNICAL MANAGEMENT RESPONSIBILITIES
· Drive continuous improvement through trend reporting analysis and cost conscious management.
· Facility management and maintenance including mechanical, electrical, HVAC, environmental and janitorial disciplines.
· Maintain the positive image of our facilities and grounds for our customers, our employees and our stakeholders.
· Establish, maintain and improve our total productive maintenance program for asset management centered on CMMS.
· Project management execution in a cross functional environment with multiple customers and direct conflicts.
· Establish new measurement systems if/where possible.
· When possible and/or practical, exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Organize the Environmental, Health, And Safety (EHS) activities in support of Industry Standards / Certifications and regulatory compliance.
· Determine how to interrelate activities under a single focus to streamline execution.
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Remain current with regulatory standards in the areas of responsibility.
· Ensure 100% adherence to all company policies and procedures (i.e. EHS, Security, and Quality).
· Ensure all sensitive and confidential information is handled appropriately.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to read, analyze, interpret and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
· Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
· Ability to effectively present information to top management, public groups, and/or boards of directors.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to tailor advanced quality tools training to all levels of the organization.
· Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
· Ability to apply concepts of basic algebra and geometry.
· Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
· Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
· Strong knowledge of global and regional logistics operations and industry.
· Strong proficiency in determining logistics requirements to enable company’s business goals and objectives with ability to devise and implement strategy to achieve targets.
· Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum company footprint.
· Strong knowledge of international direct and indirect taxes as well as global customs regimes.
· Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.
· Strong and convincing communication skills.
· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

EDUCATION & EXPERIENCE REQUIREMENTS

· Minimum of five years management/technical experience in all aspects of facilities management, which includes Facilities Engineering and EHS Management experience. Excellent verbal, written, organizational, financial, operations and computer skills. Direct supervisory experience in the disciplines mentioned above preferred. B.A./B.S. or equivalent preferred; and five years experience; or equivalent combination of education and experience
· Or a combination of education, experience and/or training.

JOB SUMMARY

Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.

First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

JOB SUMMARY

Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.

First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

JOB SUMMARY

Oversee production processes and assists Supervisor in establishing production priorities for products in keeping with effective operations and cost factors.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Confers with management personnel to establish production and quality control standards. Also assists in obtaining data regarding types, quantities, specifications, and delivery dates of products ordered. Helps to minimize excessive material on production floor.
· Assists in the coordination of production activities with procurement, maintenance, and quality control activities to obtain optimum production and utilization of human resources, machines, and equipment.
· Reviews and discusses production, quality control, maintenance, and operational reports to determine causes of nonconformity with product specifications, and operating or production problems with production supervisors.
· Assists in the minimization of scrap and materials request order (MRO) usage. Ensures that each workstation has a clean operating area. Assists in the implementation of operating methods and procedures designed to eliminate operating problems and improve metrics.
· Monitors all production metrics and completes monthly “report card”. Seeks continued improvement in lowering line and plant defects per million (DPM).
· Ensures that line employees read, understand and adhere to appropriate policies and procedures. Ensures proper stocking and availability of operation supplies and equipment.
· Assists in monitoring the SPC system to fix repetitive and recognize problems immediately. Compiles, stores, and retrieves production data.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Strong knowledge of global and regional logistics operations and industry.
· Strong proficiency in determining logistics requirements to enable company’s business goals and objectives with ability to devise and implement strategy to achieve targets.
· Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum company footprint.
· Strong knowledge of international direct and indirect taxes as well as global customs regimes.
· Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.
· Strong and convincing communication skills.
· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

EDUCATION & EXPERIENCE REQUIREMENTS

· Bachelor’s degree or equivalent preferred.
· At least 2 years experience.
· Or a combination of education, experience and/or training.

Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!

Location/Division Specific Information – Austin, TX / USA - Remote

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact? –

Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.

What will you do?

- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures

How will you get here?

Education:

- BS degree in Electrical/Computer Engineering, Computer Science or related field is required

Experience:

- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required

Knowledge, Skills, Abilities:

- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required
Remote working/work at home options are available for this role.

JOB SUMMARY

Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.

ESSENTIAL DUTIES AND RESPONSIBILITIES

- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.

EDUCATION & EXPERIENCE REQUIREMENTS

- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.

JOB SUMMARY

Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.

First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Location/Division Specific Information – Austin, TX/ USA - Remote

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact? –

Jabil is seeking a Sr. Software Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software production environment. The Software Test Development Engineer play a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.

What will you do? –

- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware components or devices such as motherboard, memory, CPU, storage (SSD, HDD, NVMe) and PCIE devices (NIC, GPU, Mezz cards, RAID cards)

- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports

- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)

- Documentation: Maintain comprehensive manufacturing server (L10) and rack (L11) documentation of test procedures, specifications, and Infrastructure

- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, and quality assurance personnel, to ensure alignment on testing requirements and quality standards

- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date

- Definition and collaboration on overall test infrastructure and application architectures

How will you get here? -

Education:

- BS degree in Electrical/Computer Engineering, Computer Science or related field is required

Experience:

- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required

- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered

- Excellent verbal and written communication skills is required

Knowledge, Skills, Abilities:

- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus

- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu

- Expertise with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe): IPMI, Redfish, mprime, FIO, Linpack, ptugen, memtester

- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare

- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus

- Experience with code versioning tools (Git preferred)

- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations

- Ability to travel up to 10% globally as required

Preferred Qualifications:

- MS preferred

- Experience working in a multi-site and multi-cultural environments is a plus

Job Description

Salaried Day Shift- Mon-Fri

How Will You Make An Impact?
Manage, control and direct all inventory control, which includes receiving, stockroom, shipping, production floor Inventory, MRB and Inventory Analysts. Provide exceptional support to customers, team members, and shareholders.

What Will You Do?
Recruitment and Retention:
· Recruit, interview and hire Inventory Control, Stockroom, Prep and Receiving Supervisors

· Communicate criteria to recruiters for Inventory Control, Stockroom, Prep and Receiving Supervisors position candidates.
· Coach Inventory Control staff in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Inventory Control staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for Inventory Control function.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
· Provide weekly communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from staff.
· Assess communication style of individual team members and adapt own communication style accordingly.
FUNCTIONAL MANAGEMENT RESPONSIBILITIES
Business Strategy and Direction:
· Know and understand the campus strategic directions.
· Define, develop and implement an Inventory Control strategy, which contributes to the campus strategic directions.
· Develop an understanding of the Workcell business strategy as it pertains to Inventory Control.
· Provide regular updates to BUM, WCM, and Operations Manager on the execution of the strategy.
Cost Management:
· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.
· Provide feedback to peers (BUMs, WCMs, Functional Managers (FMs) on cost and cost trends.
Forecast Development and Accuracy:
· Prepare timely forecasts for the department.
· Compare forward forecast results to historical actual results for trend assessment and analysis.
TECHNICAL MANAGEMENT RESPONSIBILITIES:
· Drive continuous improvement through trend reporting analysis and metrics management.
· Assess the adequacy of data gathering methods utilized by the workcells.
· Assure that procedures and work instructions are efficient and not redundant.
· Offer new ideas and suggestions for improvement. Identify and implement new practices and processes that are “best in field.”
· Demonstrate a commitment to customer service; anticipate, meet, and exceed expectations by solving problems quickly and effectively; making customer issues a priority.
· Lead by example; “walk the talk.”
· Facilitate any physical inventories as necessary.
· Establish new measurement systems if/where possible.
· Exchange knowledge and information with other Jabil facilities to ensure best practices are shared throughout the Jabil organization.
· Ensure 100% adherence to all company policies and procedures (i.e. Health and Safety, Quality).
· Ensure all sensitive and confidential information is handled appropriately.
· Ability to read, analyze, interpret and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
· Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
· Ability to effectively present information to top management, public groups, and/or boards of directors
· Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
· Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.

How Will You Get Here?
KNOWLEDGE REQUIREMENTS:
· Ability to read, analyze, interpret and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.
· Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community
· Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
· Ability to apply concepts of basic algebra and geometry.
· Strong knowledge of global and regional logistics operations and industry.
· Strong proficiency in determining logistics requirements to enable company’s business goals and objectives with ability to devise and implement strategy to achieve targets.
· Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum company footprint.
· Strong knowledge of international direct and indirect taxes as well as global customs regimes.
· Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.
· Strong and convincing communication skills.
· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

. Proficiency use of MRP programs, preferable SAP

EDUCATION & EXPERIENCE REQUIREMENTS:
· Bachelor’s degree preferred;
· 7 years experience, including 5 years in supervisory role.
· Or a combination of education, experience and/or training.

Benefits You Will Receive While Working With Jabil:

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities

Build your career with Jabil! We challenge and empower you to make most of your talents, working with outstanding colleagues from diverse backgrounds who share your drive and passion to make Jabil grow!

Location/Division Specific Information – Austin, TX / USA - Remote

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact? –

Jabil is seeking a DCI Test Development Engineer who will directly contribute to the transformative growth within our Enterprise and Infrastructure division by applying unique and innovative approaches to solving problems within a large-scale software and data center infrastructure. The DCI Test Development Engineer plays a vital role in ensuring the quality and reliability of hardware products, contributing to the overall success of the manufacturing process and customer satisfaction. You will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and data center infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil’s world-class manufacturing environments.

What will you do?

- Test System Development: Design and develop test systems and procedures for manufacturing processes. This includes creating test plans, test cases, and test scripts to assess the functionality and performance of hardware.
- Develop and implement automated manufacturing test sequences in Python that interface with BMS and PLC hardware to validate the functional performance, communication protocols, and safety logic of liquid cooling equipment.
- Test Software Development: Create, validate, release, and maintain test software and scripts that automate the testing process. This software may include code for controlling test equipment, collecting and analyzing data, and generating test reports.
- Test Sustaining: Support and maintenance for the manufacturing server (L10) and rack (L11) level test software and infrastructure deployed at our production facilities, including the implementation of minor system configuration changes (new IPNs)
- Documentation: Maintain comprehensive documentation of test procedures, specifications, and Infrastructure
- Collaboration: Work closely with cross-functional teams, including hardware engineers, manufacturing engineers, controls engineer, and quality assurance personnel, to ensure alignment on testing requirements and quality standards
- Continuous Learning: Stay updated on the latest advancements in testing technologies, methodologies, and industry best practices to keep manufacturing processes competitive and up to date
- Definition and collaboration on overall test infrastructure and application architectures

How will you get here?

Education:

- BS degree in Electrical/Computer Engineering, Computer Science or related field is required

Experience:

- 5-8 years’ experience in a software manufacturing test development/sustaining with enterprise server, storage or networking products is required
- 10+ years of relevant experience in a software manufacturing test development/ sustaining with enterprise server, storage or networking products and some college coursework in lieu of a 4- yr. degree, will be considered
- Excellent verbal and written communication skills is required

Knowledge, Skills, Abilities:

- Expertise in the following programming/scripting languages: Python, Java, BASH. C, C++, experience a plus
- Linux development expertise with a solid understanding of its fundamentals: CentOS/Ubuntu
- Python for hardware automation, with a deep understanding of industrial communication protocols (Modbus, BACnet, or Ethernet/IP) and the ability to interpret P&IDs and electrical schematics for cooling systems; experience in designing physical test stations and sensor integration is highly preferred.
- Expertise in the creation and configuration (DHCP, PXE boot, nginx) of Virtual Machines (VMs) using VMWare
- Expertise with leading edge networking systems, hardware, software and protocols including but not limited to enterprise ethernet datacenter switching/routing L1, L2, and L3 (BGP, DHCP Relay, ECMP). Arista CloudVision is a plus
- Experience with code versioning tools (Git preferred)
- Strong knowledge of professional software engineering practices for the complete software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations
- Ability to travel up to 10% globally as required

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast‑growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high‑mix/high‑volume PCB assembly and secondary processes.

What You’ll Do

- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.

- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).

- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.

- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.

- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.

- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.

- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.

What You Bring

- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.

- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.

- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.

- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.

- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.

- Effective communicator and collaborator with a hands‑on leadership style.