Jabil Circuit Inc Jobs in Usa

Job Summary

• Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
• Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
• Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
• Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
• Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
• Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
• Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
• Maintain accurate records of equipment maintenance, process parameters, and production issues.
• Adhere to all safety protocols and quality standards within the SMT department.

Job Qualifications

• Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
• Minimum of 2-4 years of experience working with SMT production lines and equipment.
• Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
• Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
• Ability to read and interpret technical drawings, schematics, and process specifications.
• Excellent problem-solving skills and a methodical approach to troubleshooting.
• Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
• Ability to work independently and as part of a team in a fast-paced manufacturing environment.
• Familiarity with IPC standards (e.g., IPC-A-610) is a plus.

Job Summary

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Job Summary

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Job Summary

Shift: Every Other Wednesday and Every Thursday, Friday & Saturday 6am-6pm

• Develop, implement, and maintain quality control plans and procedures for new and existing products.

• Conduct root cause analysis for product non-conformances and process deviations, implementing effective corrective and preventive actions (CAPA).

• Perform statistical analysis of quality data to identify trends, opportunities for improvement, and risks.

• Participate in design reviews, process validations, and manufacturing readiness reviews to ensure quality requirements are met.

• Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Supply Chain) to integrate quality into product development and production.

• Support internal and external audits, ensuring compliance with ISO standards, customer specifications, and regulatory requirements.

• Develop and deliver quality training to manufacturing personnel and other stakeholders.

• Review and approve engineering changes, ensuring their impact on product quality is assessed and controlled.

• Drive continuous improvement initiatives using methodologies such as Six Sigma, Lean Manufacturing, and FMEA.

• Document and report on key quality metrics and performance indicators.

Job Qualifications

• Bachelor's degree in Engineering (e.g., Mechanical, Electrical, Industrial, Manufacturing) or a related technical field.

• 3-5 years of experience in a Quality Engineering role within a manufacturing environment.

• Strong understanding of quality management systems (e.g., ISO 9001, AS9100, ISO 13485 depending on industry).

• Proficiency in statistical process control (SPC), measurement system analysis (MSA), and other quality tools.

• Demonstrated experience with root cause analysis methodologies (e.g., 8D, 5 Why, Fishbone diagrams).

• Excellent analytical, problem-solving, and decision-making skills.

• Strong communication and interpersonal skills, with the ability to effectively collaborate with diverse teams.

• Ability to read and interpret technical drawings and specifications.

• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

• ASQ certifications (e.g., CQE, CSSBB) are a plus.

Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Program Manager High-volume Manufacturing (HVM) in Electronics

Job Description:

Job Title: Program Manager High-volume Manufacturing (HVM) in Electronics

Job Type: Fulltime

Job Location: Cupertino, CA

Work Schedule: Onsite

Salary: 150k to 160k, Based on experience

The Project Manager will manage the relationship with Contract Manufacturers and oversee projects from customer commitment to implementation.

Responsibilities:

• Manage projects from customer commitment to implementation, ensuring on-time, on-budget delivery.
• Define project scope, timelines, and resource needs, and develop project specifications.
• Provide regular status updates to senior management and team members.
• Maintain project tracking documentation and support the development of BOMs for new items.
• Coordinate with R&D, Operations, and Engineering teams to manage product formulas, production capability, and testing.
• Manage change part communications and coordinate trial schedules with Quality and Production teams.

Qualifications:

• 5-10 +years of project management experience.
• Strong communication, problem-solving, and organizational skills.
• Ability to work effectively in cross-functional teams and manage multiple projects simultaneously.
• Worked with Technology CMs like – Foxconn, Pegatron, Wistron, Compal, Quanta, Tata, Inventa, Flextronics or Flex, Jabil, Luxshare, BYD Electronics
• Worked with large global companies and drove the relationship with the CM. Large global companies include – Apple, Microsoft, Sony, Dell, HP, Meta, ASUS, Acer, Cisco, Huawei etc…
• Must be able to work under pressure
• Must be able to travel to China
• Able to speak Mandarin a big plus

About Maxonic:

Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients.

Interested in Applying?

Please apply with your most current resume. Feel free to contact Jhankar Chanda ( /(4 for more details.

About the Company:

Translarity is a growing leader in the semiconductor test industry, delivering innovative wafer test solutions that power the technology shaping our digital world. Headquartered in Silicon Valley, with operations in California, Texas, the Philippines, Taiwan, and Vietnam, we serve leading semiconductor manufacturers and their global supply chain partners.

Our mission is to revolutionize semiconductor wafer testing through innovation and excellence. With over 100 patents and a focus on full-wafer testing, we provide solutions that combine low cost, high performance, and fast cycle times using cutting-edge MEMS probe technology. Join our dynamic and growing team as we continue to address the evolving needs of the semiconductor industry.

What is a Probe Card?

A probe card is a critical component in semiconductor testing, acting as the interface between automated test equipment and the semiconductor wafer. These assemblies often include complex multi-layer PCBs with tens of thousands of routed traces and thousands of discrete components, supporting mixed-signal, high-speed, RF, and power-delivery paths. Precision and electrical integrity are essential for accurate wafer-level testing.

Position Purpose:

We are seeking a Test Design Engineer to play a key role in electrical problem solving, troubleshooting, and continuous improvement for advanced probe card technologies at our Hutto facility. This is a hands-on, production-facing engineering role focused on resolving complex electrical issues, improving yield and reliability, and feeding lessons learned back into design, manufacturing, and test processes.

This role is suited for an engineer who is comfortable working directly with production, test, and rework teams, taking ownership of difficult electrical issues, and driving systematic improvements rather than only supporting individual failures.

Responsibilities:

• Lead design of test hardware, including PCB design, circuit design and FPGA programming
• Lead electrical troubleshooting of probe cards and subassemblies, including mixed-signal, high-speed, RF, and power delivery paths.
• Write test vectors and design test programs for different platforms
• Own complex, cross-functional debug efforts involving dense, multi-layer PCBs with thousands of components and extremely tight tolerances.
• Analyze failing electrical test data to identify root causes such as opens, shorts, leakage, impedance drift, signal integrity issues, crosstalk, grounding problems, or component failures.
• Perform and interpret measurements using oscilloscopes, VNAs, TDR, LCR meters, curve tracers, and automated test equipment.
• Drive structured root-cause analysis (RCA) and corrective actions, ensuring issues are fully understood and addressed, not just worked around.
• Support and guide technicians during debug, rework, and retest activities, setting best practices and ensuring consistent execution.
• Participate in RMA evaluations, customer-return analysis, and field failure investigations, identifying systemic trends and improvement actions.
• Develop and maintain failure summaries, yield analyses, corrective action recommendations, and production/test documentation.
• Lead or contribute to continuous improvement initiatives focused on electrical margins, test robustness, production yield, and overall product quality.
• Serve as a technical escalation point for electrical issues encountered in production and test.

Skills and Qualifications:

• Strong foundation in electrical engineering design, including analog, digital, mixed-signal, and power circuits. Must be able to both design test circuits and understand their behavior.
• Hands-on knowledge of Labview.
• Solid understanding of PCB design and stack-ups, routing behavior, parasitics, and how electrical characteristics evolve in dense, high-complexity assemblies.
• Demonstrated ability to trace signals, interpret schematics, and reason through complex component interactions on large multi-layer boards.
• Hands-on expertise with electrical lab equipment such as oscilloscopes, VNAs, TDRs, LCR meters, and automated test systems.
• Working knowledge of high-speed and RF concepts including impedance control, insertion loss, reflections, return loss, and crosstalk.
• Proven, methodical approach to troubleshooting and root-cause analysis in a production environment.
• Strong communication skills with the ability to translate technical findings into actionable guidance for technicians, manufacturing, and design teams.
• High attention to detail with disciplined documentation and follow-through.
• Working knowledge of MS Office; experience with ERP/MES systems is a plus.

Education and Experience:

• Master’s degree in Electrical Engineering or a closely related field required.
• Demonstrated circuit design experience
• Demonstrated hands-on experience in electrical troubleshooting, production support, test engineering, or related roles involving complex PCB assemblies.
• Experience in semiconductor ATE design, probe card, or advanced electronics manufacturing environments strongly preferred.
• Prior involvement in yield improvement, failure analysis, or process improvement initiatives is highly desirable.

Disclaimer: As part of our selection process, shortlisted candidates will be required to complete an onsite technical interview that includes both an oral assessment and a live problem-solving session using a whiteboard. Candidates should be prepared to explain their thought process and demonstrate technical proficiency in real time.

All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, national origin, age, disability, or veteran status

Job Type: Full-time

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Work Location: In person

• Conduct thorough hardware security assessments and provide actionable insights.
• Design, test, and analyze circuit designs and PCB layouts with an eye on security.
• Develop and implement secure boot solutions and cryptography measures.
• Collaborate with third-party manufacturers to update and secure device designs.
• Utilize common electronics test equipment for testing, debugging, or hacking hardware.

• 5+ years of experience in hardware security, embedded systems security, or similar
• Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or related technical field.
• hands-on experience with common test equipment: Oscilloscopes, multimeters, microscopes, logic analyzers, soldering

• Experience with manufacturing security processes, including secrets provisioning and secure production flows, is highly desirable.
• Previous work in a team environment focusing on hardware security for telecom or consumer electronics industries.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Company Description

Peerless Electronics Inc., an employee-owned company founded in 1945 and based in Hauppauge, New York, is a full-service, authorized stocking distributor supporting military, aerospace, industrial, transportation, and medical sectors. Peerless provides an extensive inventory, including switches, circuit breakers, thermostats, and sensors, along with over 50 value-added services and customized technical support. Peerless is committed to quality, innovation, and supporting customer needs in specialized industries.

Our Inside Sales Representatives receive requests for quotation and orders from customers. They generate quotations, enter orders and relay pertinent information to customers. They are also expected to coordinate with other departments, manufacturers, and sales representatives surrounding handling of orders and providing service to customers.

Job Responsibilities

• Sell products and services offered by Peerless Electronics. Sales are attained by building relationships and customizing the sales approach to evaluate and deliver on the customer’s needs.
• Provide price and delivery quotes to customers within an assigned territory by working with the purchasing department, Sales manager and the manufacturers to get the most competitive pricing.
• Process customer orders by entering into the sales database, confirming price, availability, and delivery schedules. Order and Contract review requires attention to detail and proof reading for accuracy and maintaining quality expectations.
• Participate in the quality process by following defined policies and procedures to maintain efficient sales cycle with the goal reducing sales errors and uphold quality to the highest level. Actions are measured by our On Time Delivery percentage.
• Monitor dashboard reports to assess customer performance
• Qualify and cultivate prospective customers and opportunities in addition to the assigned existing customer base. Update CRM as needed.
• Provide management with information regarding sales, marketing techniques, new products and market strategy by preparing forecast and activity reports on account territory.
• Participate in and attend sales meetings with Field Sales Representatives to develop sales relationship and trust with the customers.
• Meet mutually agreed upon goals and objectives while performing other assigned and related duties.

Job Requirements

• Bachelor’s degree or equivalent experience in Business
• 1-3 years of inside sales experience
• Working knowledge of the most current technologies and products in the electromechanical industry is helpful but not required.
• Experience within the military, aerospace or industrial sector is preferred
• Sound judgment and problem-solving skills
• Ability to multi-task, organize, and prioritize work
• Excellent communication skills, both written and verbal

Physical Requirements

• Hand dexterity ability (ability to operate telephone, computer)
• Ability to sit for extended periods of time

Work Authorization

• Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20).

Compensation

• $24-28 per hour depending on experience, plus commission

The Sr. Manager of Design Engineering LTCC is responsible for leading all design aspects of the LTCC Design Team's development activities. The Sr. Manager of Design Engineering will focus on executing the LTCC product development engineering function as a cohesive unit, the conceptualizing and day-to-day management of simultaneous projects, delivering manufacturable designs to agreed specifications within time and budget constraints, and the fostering of innovative solutions to customer needs.

This position has reporting responsibility to the Director of Engineering - LTCC.

Salary Range: $175,000 - $200,000 per year

• Manage the design of RF & Microwave circuits, components and sub-assemblies, focused on Filters, Power Splitters, Couplers, and Baluns, for high-performance and multi-function devices. Modify existing designs to improve performance, quality, manufacturability, production yields, etc.
• Accountable for adherence to device perturbation and sensitivity analysis process to ensure highest possible production yields, meeting deadlines and resolving performance issues along the way.
• Direct and manage the performance of the group's circuit, components and sub-assemblies' analysis and simulation efforts employing commercially available EDA Software including PSpice, Method of Moments (MoM), Finite Element Method (FEM) engines (i.e. Genesys, ADS, HFSS, CST), and other CAD tools.
• Develop novel and accurate multi-physics simulation models, DOEs, and technology characterization efforts to forecast production-level and field performance
• Responsible for the management of a library of FEM and MoM simulation models including connectors, PCBs, LTCCs, Cal Standards, Wire bonds and lumped components, among others.
• Create and implement an optimum design flow and strategy geared to lower turnaround times, increase component's performance and rate of 1st spin success while ensuring manufacturability, improving yields, and lowering costs
• Responsible for the team's design approach, topology selection criteria, technological choice, design time budgeting, and overall technical approach to any requirement meeting deadlines and resolving performance issues along the way.
• Research & utilize latest techniques & approaches, analyze user input, and identify and establish performance standards. Develop processes and procedures to verify and validate designs through simulations, tests and reliability studies.
• Serve as technical support to Production, Quality, Reliability, Supply Chain, Sales, Marketing, Engineering Test & Manufacturing Process Engineering departments on new and existing designs.
• Prepare application notes, technical articles, test plans & catalog specs for publication.
• Interface with Operations, Quality Assurance, Reliability and Strategic Sourcing groups to guide device and material qualification efforts and manufacturability reviews. Responsible for ensuring products not only meet performance requirements but are reliable and manufacturable as well.
• Evaluate components, materials & suppliers.
• Create a map of competing technologies and elaborate a SWOT analysis of our current LTCC offerings within that context
• Lead and actively participate in design review meetings.
• Provide technical support directly to customers.
• Promote and contribute the Patent/IP Program.
• Solve technical, operational and design group issues.
• Provide engineering execution excellence of design and development projects.
• Ensure deadlines are met and team members are held accountable.
• Provide guidance and execution on product roadmap.
• Work with the Director of Engineering - LTCC to define yearly budget for CapEx, personnel and development expenses for the LTCC Design Team; track and execute to the defined budget.

• Manage the LTCC Design team to support multiple projects simultaneously with competing priorities.
• Supervise, train, direct and mentor Design and Applications Engineers, sales, and marketing members
• Define objectives and track results for team members as well as proposing figures of merit and KPIs intended to capture the design team's performance
• Organize and lead the work of the Design Team by delegating assignments, provide guidance to achieve projects objectives in accordance with established timelines, budgets and policies.
• Responsible for determining the skills, workload expectations, and performance rewards for all new and current group members.
• Keep projects focused and manageable.
• Manage rigorous documentation during the design effort, including design documentation, qualification test and validation reports, supporting analysis in accordance with the company's quality standards.
• Provide technical vision and direction to ensure the design team is aligned with the strategy of the LTCC Business Unit and company.

The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position.

Qualifications:

• BSEE with minimum of 13 years' related design and management experience OR; MSEE with minimum of 10 years' related design and management experience preferred.
• Must have experience managing a multi-functional engineering development group and have demonstrated ability to manage a team of engineers to create & support the activities during the life cycle of products, from conception through production within stated time frames.
• Minimum of 10 years' relevant experience in microwave circuit design of passive components such as Filters, Power Splitters, Couplers, and Transformers operating to the mmWave range.
• Minimum of 8 years' relevant experience in the design of RF Filters.
• Familiarity with circuit simulation and both 2.5D and 3D EM simulation techniques.
• Real-world strong lab analysis and debug experience required to verify simulated performance.
• Professional and positive approach, self-motivated, strong in building relationships, team player, dynamic, creative with the ability to work on own initiative.
• Demonstrated strong oral and written communication skills.
• Past experience working for an ISO company that practices LEAN manufacturing.
• Proven experience in developing products under a Phase Gated Process (PGP).
• Must be a US Citizen or US Permanent Resident (Green Card Holder) due to ITAR compliance.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Displays enthusiasm and Passion for their work.
• Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement.
• Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals.
• Operates with the mindset of Customer Obsession by meeting or exceeding expectations to both internal and external customers.
• Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions.
• Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail.
• Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork.
• Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect.

Additional Requirements/Skills:

• "Out of the box" thinking is key; contributes to the products roadmap and is willing to take innovative product risk while balancing the roadmap for on-time deliverables.
• Strong relationship management, strategy development, project management, problem solving and change management skills.
• Must have the ability to build relationships and work successfully with members outside of those within their direct reporting structure.
• Manage diverse, simultaneous projects of varying complexities.
• Comply, understand, and support corporate safety initiatives to ensure a safe work environment.
• Ability and willingness to abide by Company's Code of Conduct.
• Occasional travel, some overnight, as required (up to 30%).

Benefits:

Avanciers is seeking a highly skilled Engineering Technician for an exciting opportunity with one of our Fortune 500 clients, based in New Berlin WI.

Work Location: New Berlin WI,

Job Title: Engineering - Engineering Technician

Your responsibilities

• Support design engineers with development activities, including component evaluation, prototype assembly, and product verification testing.

• Execute product and prototype testing in accordance with approved test specifications, standards, and procedures; analyze results to confirm compliance with performance requirements.

• Prepare, review, and maintain accurate and complete test reports, data records, and documentation.

• Perform safety and EMC certification testing in accordance with UL, CSA, and IEC standards and generate formal reports for submission to third-party certification agencies.

• Travel to external accredited test facilities, both domestic and international, as required to support certification activities.

• Design, build, and maintain test setups and fixtures, including mechanical construction and electrical wiring, based on engineering specifications.

• Troubleshoot, diagnosis, and repair electronic and electrical circuits using schematic diagrams under the guidance of engineers or senior test technicians.

• Perform precision soldering of surface-mount components, including 1206, 0805, 0603, and 0402 package sizes.

• Set up, operate, and collect data using standard laboratory instrumentation such as digital multimeters (DMMs), ammeters, oscilloscopes, power meters, thermometers, and LabVIEW-based systems.

• Assist in ISO/IEC 17025 audits and assessments to support UL and SGS laboratory accreditations.

• Comply with all company safety policies, work rules, and regulatory requirements

Your background Education

• Associate degree in Electrical/Electronic Engineering with a minimum of five (5) years of relevant experience; or

• Bachelor’s degree in Electrical/Electronic Engineering or related discipline with a minimum of two (2) years of relevant experience.

Work Expectations:

The EIC Technician will:

• Ensure that all electrical equipment is in safe operating condition
• Practice safe work habits daily and ensure all safety processes are followed.
• Maintain proper tools in good working condition and keep work areas clean.
• Maintain mechanical and electrical knowledge via in-going training, industry workshops, and technical reading.
• Assist with developing training documentation and participate in the training of new maintenance team members.

Key Responsibilities:

• Attend daily shift meetings to discuss prioritized work orders and minimizing downtime.
• Perform designated electronic technical duties to ensure system performance.
• Troubleshoot and resolve control systems issues to minimize downtime.
• Support project work with Controls Engineers, from concept to completion.
• Perform emergency repairs and assist in installing new equipment.
• Document work performed on control systems and support process improvements.
• Adhere to safety guidelines and actively participate in safety programs.
• You will work on challenging assignments that include investigating, troubleshooting, and solving a wide variety of instrumentation & controls engineering issues
• Provide direct support for Controls Engineering functions (OT-Operations Technology) in manufacturing processes.
• Perform daily engagement/troubleshooting with end-to-end systems, including machine controls, SCADA, and interfaces with upper-level systems (MES and SAP).
• Conduct equipment installations and system development/troubleshooting as required to align to current standards.
• Investigate connectivity issues to diagnose and resolve network connection problems.
• Assist in maintaining program/PLC backups for devices to ensure data integrity and recovery readiness.
• Provide technical support for troubleshooting Allen-Bradley, Siemens, and other PLC systems.
• Support and troubleshoot Profibus, ControlNet, and Ethernet data communication systems.
• Replace defective components or parts, using hand tools and precision instruments.
• Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electronic components, assemblies, or systems.
• Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
• Identify and resolve equipment malfunctions, working with manufacturers or field representatives as necessary to procure replacement parts.
• Review electrical engineering plans to ensure adherence to design specifications and compliance with applicable electrical codes and standards.
• Assemble, test, or maintain circuitry or electronic components, according to engineering instructions, technical manuals, or knowledge of electronics, using hand or power tools.
• Review existing electrical engineering criteria to identify necessary revisions, deletions, or amendments to outdated material.
• Maintain system logs or manuals to document testing or operation of equipment.
• Educate equipment operators on the proper use of equipment.
• Integrate software or hardware components, using computer, microprocessor, or control architecture.
• Install or maintain electrical control systems, industrial automation systems, or electrical equipment, including control circuits, variable speed drives, or programmable logic controllers.
• Execute PM work orders and create work orders for issues found during PM inspections.
• Troubleshoot, repair, improve, and maintain all equipment including all electrical components, drive systems, conveyors, processing equipment, pneumatic and hydraulic systems, utilities, etc.
• Utilize shop equipment, measurement and other diagnostic tools, and power and hand tools to assess the condition of new and used equipment.
• Maintain and troubleshoot PLC, HMI, and vendor developed programs.
• Become SAP proficient to pull weekly work schedule and evaluate work orders and concerns to escalate appropriately to ensure scheduled work can be completed.
• Prepare maintenance daily reports using activity logs, analysis, and trends.
• Provide electrical support to capital and internal projects. This includes documentation, job scopes, managing contractors, and participating in meetings.
• Any other duties as assigned by management.

Requirements:

Knowledge, Skills, Abilities & Other Characteristics:

• Experience with PLCs and HMIs strongly preferred.
• Advanced understanding of control systems, relays, sensors, fuses, breakers, and computer networks.
• Capable of operating hand, power, and specialized tools
• Excellent problem-solving and communication skills
• Strong computer skills and willingness to use tablets
• Basic understanding of mechanics
• Knowledge of SAP PM preferred

Minimum Education:

• Bachelor’s Degree, College Diploma, or Equivalent experience
• 1 years of production/operational work required
• 1 year of experience in batch, continuous, and discrete manufacturing; work experience related to packaging lines.