Information Technology Jobs in Chalfont

MYCO Mechanical is a trusted leader in mechanical contracting, committed to delivering high-quality HVAC, plumbing, and piping solutions across commercial projects. We are built on a foundation of precision, accountability, and innovation. As our Junior Project Manager, you will play a critical role in ensuring the success of our projects from pre-construction through closeout.

Position Summary:

The Junior Project Manager is responsible to relay information for successful planning, execution, coordination, and financial control of mechanical construction projects as well as offer input. This role requires a strong understanding of project documents, construction methods, codes, and scheduling practices. The Junior Project Manager is the primary liaison between Sr. Project Management at MYCO Mechanical and external stakeholders such as General Contractors, Architects, Construction Managers, and regulatory agencies.

Key Responsibilities:

1. Review of Plans & Specifications

· Understand and interpret project goals, means, and methods per contract documents.

· Generate and manage RFIs to resolve discrepancies or conflicts in drawings or specifications.

2. Project Planning & Scheduling

· Assist in the development of a comprehensive project plan and timeline aligned with contractual milestones.

· Forecast manpower needs and apprentice ratios in compliance with labor standards.

· Assist with site logistics including deliveries, material storage, site access, and safety.

3. Coordination

· Participate in and represent MYCO in all scheduled project meetings.

· Adapt to changing site conditions, RFIs, weather, and unforeseen delays.

4. Site Management

· Communicate project scope, methods, and schedule to field staff and subcontractors.

· Oversee daily logs, material usage, and manpower reports generated by the Foreman or Superintendent.

5. Office Management

· Assist the Project Manager along with the Project Assistant to ensure compliance with contract requirements.

6. Change Order Management

· Coordinate with Accounting for accurate billing and tracking of approved changes.

7. Subcontractor Management

· Monitor subcontractor performance for quality, schedule adherence, and labor law compliance.

8. Project Closeout

· Oversee the substantial and final completion phases, including the creation and resolution of punch lists.

· Assist with the submission of documentation of completed work or provide justification for incomplete items not within MYCO’s scope.

Qualifications:

· Previous mechanical construction project management experience, preferred.

· Understanding of HVAC, plumbing, and mechanical systems.

· Excellent organizational, leadership, and communication skills.

· Ability to manage multiple stakeholders and shifting priorities.

MYCO Mechanical is an Equal Opportunity Employer. All qualified applicants will receive equal consideration for employment without regard to race, color, national origin, religion, sex, pregnancy, marital status, sexual orientation, gender identity/expression, age, disability, genetic information, military service, covered/protected veteran status or any other federal, state or local protected class.

Important notice to Employment Businesses/ Agencies

MYCO Mechanical does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact the human resources department to obtain prior written authorization before referring any candidates to MYCO Mechanical. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and MYCO Mechanical. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of MYCO Mechanical. MYCO Mechanical shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

• 
  
• You will pass on instructions to members of the work group.
  
• You will check and report work progress of the group.
  
• You will perform work site inspections.
  
• You will receive job or work assignments from welding supervisor.
  
• You will check and report work progress of the group including written documentation and shift assist requests.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will work with Riggers in dry docking and launching operations.
  
• You will direct operations of cranes and similar equipment capacities using standard signals.
  
• You will determine the placement of gear to assure loads are secure and balanced.
  
• You will perform spot checks to assure established rigging methods and safety practices are being followed.
  
• You will utilize protective equipment and clothing for work assignments.
  
• You will demonstrate proficient knowledge of rigging to assist Journeymen Riggers, or lead lesser skilled workers, in installation, removal, and repositioning of machinery, structural members of ships or buildings, heavy equipment or other loads.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will install and fit parts on ships and locate positions of pieces by reference to water line, center lines, frame lines and other reference points.
  
• You will install packing, gaskets, liners and similar items where necessary.
  
• You will remove and repair or replace damaged parts of doors, hatches, and ship structures
  
• You will lay out shell, deck and bulkhead plates, I-beams, channel bar, angle bar, and other structural shapes, gun rings, struts, framing, and foundation structures and other parts from blueprints and mold loft templates.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.
  
• You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.
  
• You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.
  
• You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to obtain and maintain a current valid United States driver's license.
  
• You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• You will be required to obtain and maintain a U.S. Passport.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
  
• This position may require rotating shift work.
  
• This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will provide guidance and direction to Shipfitter shop personnel.
  
• You will provide instruction for nuclear or non-nuclear work of the Structural Group personnel in the skills of the trade.
  
• You will prepare analysis of trade requirements through the use of audits, surveillance, and/or incident reports.
  
• You will provide interpretations and problem resolution for shop employees.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

Description:

The Director of Operations will oversee all production and facility operations at ALIGN Precision Philadelphia, ensuring seamless execution across precision machining, assembly, and cleanroom environments. This role will serve as the operational hub, coordinating with the Director of Planning & Delivery and Director of Quality to deliver on customer commitments while driving efficiency, safety, and culture. Reporting directly to the Site General Manager, the Director of Operations will translate strategic goals into daily execution and long-term capability building.

Essential Duties and Responsibilities:

Production & Facilities

• Provide leadership to a staff of Production Supervisors and CNC Programmers.
• Lead machining, CNC programming, assembly, and cleanroom operations.
• In cooperation with the Director of Maintenance, oversee facilities management, equipment utilization, and preventive maintenance.
• Ensure Safety, Quality, Delivery, and Cost targets are consistently achieved.
• Develop the operations and capital equipment budget.
• Champion 5S workplace organization.

Scheduling & Capacity Planning

• Develop daily plans and execute production schedules against the master schedule.
• Cooperate with Planning and Delivery through the SIOP process providing inputs into capacity planning and modeling, aligning with the supply chain and customer demand.
• Partner with Planning and Delivery to balance inventory strategies with operational readiness.
• Collaborate with Quality and Engineering to embed process controls and ensure compliance.

Continuous Improvement

• Drive Lean, Six Sigma, and Kaizen initiatives across production areas working closely with Engineering.
• Implement systems for performance metrics, accountability, and operational transparency.
• Champion waste reduction, cycle time improvement, and productivity gains.

Culture & Leadership

• Build a culture of engagement, accountability, and innovation.
• Mentor supervisors and team leads, fostering psychological safety and high performance.
• Facilitate employee engagements and cross-functional collaboration to surface systemic themes.

Cross-Functional Alignment

• Act as the connective agent between Planning and Delivery, Quality, Engineering, Program Management and Business Development.
• Support business development by ensuring operational readiness of our expanded cleanroom and CNC automation for new verticals.
• Collaborate with leadership to embed strategic operating systems across the enterprise.

Qualifications:

• Bachelor’s degree in Engineering, Operations Management, or related field.
• 10+ years of leadership experience in precision machining, semi-conductor, aerospace, medical devices, or advanced manufacturing.
• Proven success in production leadership, scheduling, and facilities management.
• Strong background in Lean, Six Sigma, and operational excellence.
• Excellent leadership, communication, and team-building skills.
• Ability to balance strategic vision with hands-on execution.

Other Skills Required:

• Communications - Exhibits good listening and comprehension.

• Business Acumen - Understands business implications of decisions; displays orientation to profitability; demonstrates knowledge of market and competition. Aligns work with strategic goals.

Language Skills:

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

Mathematical Skills:

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Reasoning Ability:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills:

To perform this job successfully, an individual should have an understanding of Microsoft Office Software- especially knowledge of Microsoft Word and Microsoft Excel.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee will be in the office and shop and required to sit, stand and walk.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ADDITIONAL NOTES:

ALIGN Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN Precision are employed on an at-will basis.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Metrology Specialist I

On-site in West Point PA

Summary:

• Manage equipment assets at multiple locations
• Gain a working knowledge of laboratory equipment to facilitate with troubleshooting and/or communicate with the vendor/ service engineer to identify resolutions
• Participate in computer system validation activities associated with new or upgraded equipment or software packages.
• Originate and progress Deviations and Change Control records
• Perform and document investigations and assist in developing and implementing CAPA plans
• Contribute to new SOP drafting, implementation, and revisions.
• Represent the laboratory on all aspects of laboratory equipment during audits.
• Ensure compliance with all regulatory requirements (cGMP), internal policies and procedures.
• Customer focused mindset with the ability to communicate adequately (verbally/writing) to all levels within the organization.
• Willingness and ability to quickly upskill in Merck Facilities/Instrument support programs SAP, ProCal, BAS, LAMP, Electronic Validation, and other document and/or asset repositories
• Initiate, process and track work orders to facilitate timely repairs, modifications and moves of laboratory equipment.

Calibration Focus:

• Prepare, review, and approve archive instrument/equipment documentation such as master equipment lists, user access reviews, Instrument Installation & operational qualification documentation, and calibration documentation.
• Coordinate service activities across a variety of vendors and service engineers while building and maintaining strong working relationships.
• Collaborate with metrology staff across multiple testing labs and sites for process improvement, cross-training and cross-site support.

Support the purchase, installation, and equipment qualification of new laboratory equipment.

*** There will be training opportunities to support Validation*** Validation activities are included below

• Support primarily the qualification/validation of computerized analytical systems as per current guidelines.
• Partner with the business unit in the laboratories, various quality support oversight, IT technical support, and various software and instrument vendors/manufacturers.
• Perform any required change control during the life cycle of a computerized system.
• Decommission systems as required as part of the equipment qualification/validation life cycle.
• Manage the capital purchasing and initial installation of computerized analytical systems prior to validation.
• Participate in various data integrity and lab modernization activities as required.
• Will possess direct experience operating analytical instrumentation within a pharmaceutical or equivalent laboratory (vaccine or large molecule focus).
• Will have the ability to thoroughly review and scrutinize validation requirements through the life cycle of the system.

General Requirements Level 1:

-Bachelor’s degree in biological or chemical science and/or engineering plus

-2-4 years of experience participating in the validation of computerized laboratory systems or instruments (e.g. system Installation and Operational qualification, Performance qualification

-Experience working in a GMP environment and maintaining laboratory equipment.

-Highly organized, strong communication skills.

-Capable of working independently.

-Solutions orientated mindset with the ability to handle multiple high priority tasks at one time.

-Ability to succeed in a dynamic environment; flexibility to respond to changing priorities.

-Awareness to independently prioritize tasks and responsibilities based on actual or perceived level of importance and/or potential impact to the GMP environment.