Information Technology For Development Jobs in Concord
726 positions found — Page 5
H
Technician, Master
Salary not disclosed
Hendrick Acura Northlake Location: 10020 Eastfield Road, Huntersville, North Carolina 28078 Summary: Responsible for identifying necessary vehicle service and performing the repair, service, and/or maintenance work.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Examines customer vehicles.
Identifies necessary vehicle repairs and maintenance.
Estimates cost of repairs.
Performs vehicle repairs and maintenance.
Documents services performed.
Performs services efficiently and according to dealership guidelines.
Follows dealership and manufacturer service guidelines.
Requests necessary parts.
Effectively utilizes available technologies to enhance customer experience.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years o 3-5 years √ 5+ years Education/Experience: Thorough knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience required.
Certificates and Licenses: √ Valid Driver’s License √ Designated a Master Technician by respective manufacturer.
(
**ASE Master if only required by manufacturer).
√ State inspection/emissions license required by State.
√ Completed manufacturer training including diagnostics, EV, diesel, specialty vehicles.
√ Completed necessary manufacturer training to complete all warranty repairs on all model vehicles.
Computer Skills: Basic Computer skills to utilize timekeeping system.
Ability to learn parts department computer inventory and ordering system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with customers, service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Examines customer vehicles.
Identifies necessary vehicle repairs and maintenance.
Estimates cost of repairs.
Performs vehicle repairs and maintenance.
Documents services performed.
Performs services efficiently and according to dealership guidelines.
Follows dealership and manufacturer service guidelines.
Requests necessary parts.
Effectively utilizes available technologies to enhance customer experience.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years o 3-5 years √ 5+ years Education/Experience: Thorough knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience required.
Certificates and Licenses: √ Valid Driver’s License √ Designated a Master Technician by respective manufacturer.
(
**ASE Master if only required by manufacturer).
√ State inspection/emissions license required by State.
√ Completed manufacturer training including diagnostics, EV, diesel, specialty vehicles.
√ Completed necessary manufacturer training to complete all warranty repairs on all model vehicles.
Computer Skills: Basic Computer skills to utilize timekeeping system.
Ability to learn parts department computer inventory and ordering system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with customers, service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Not Specified
H
Toyota Pre-Owned/Used Car Technician
✦ New 🏢 Hendrick Automotive Group
Salary not disclosed
Hendrick Toyota Concord Location: 7670 Bruton Smith Blvd, Concord, North Carolina 28027 Summary: Responsible for identifying necessary vehicle service and performing the repair, service, and/or maintenance work.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Examines customer vehicles.
Identifies necessary vehicle repairs and maintenance.
Estimates cost of repairs.
Performs vehicle repairs and maintenance.
Documents services performed.
Performs services efficiently and according to dealership guidelines.
Follows dealership and manufacturer service guidelines.
Requests necessary parts.
Effectively utilizes available technologies to enhance customer experience.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years o 3-5 years √ 5+ years Education/Experience: Thorough knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience required.
Certificates and Licenses: √ Valid Driver’s License √ Certified/senior technician with respective manufacturer.
√ State inspection/emissions license required by State.
√ All required manufacturer fundamental training and/or NAPA training provided by HAG.
√ Meets and/or exceeds manufacturer requirements for ASE tests.
√ Completed manufacturer training to perform: warranty repairs/recalls on most vehicles, PDI’s, maintenance, and minor repairs.
Computer Skills: Basic Computer skills to utilize timekeeping system.
Ability to learn parts department computer inventory and ordering system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with customers, service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Examines customer vehicles.
Identifies necessary vehicle repairs and maintenance.
Estimates cost of repairs.
Performs vehicle repairs and maintenance.
Documents services performed.
Performs services efficiently and according to dealership guidelines.
Follows dealership and manufacturer service guidelines.
Requests necessary parts.
Effectively utilizes available technologies to enhance customer experience.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting √ Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years o 3-5 years √ 5+ years Education/Experience: Thorough knowledge of automotive parts and systems.
Demonstrable mechanical skills and knowledge.
Technical training or commensurate technical experience required.
Certificates and Licenses: √ Valid Driver’s License √ Certified/senior technician with respective manufacturer.
√ State inspection/emissions license required by State.
√ All required manufacturer fundamental training and/or NAPA training provided by HAG.
√ Meets and/or exceeds manufacturer requirements for ASE tests.
√ Completed manufacturer training to perform: warranty repairs/recalls on most vehicles, PDI’s, maintenance, and minor repairs.
Computer Skills: Basic Computer skills to utilize timekeeping system.
Ability to learn parts department computer inventory and ordering system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: Must be able to lift up to (50) pounds.
While performing the duties of this job, the employee is regularly required to talk and hear; stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl.
Environment Demands: Duties are performed primarily in the service area.
Work includes movement around vehicles, working in various physical positions, and the safe operation of power tools and test equipment.
May be exposed to loud noise, vibration, exhaust fumes, and other service and repair conditions.
Frequently interacts with customers, service advisors and the service manager.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Not Specified
H
Part Time Parts Shipping/Receiving Clerk (Chrysler Dodge)
🏢 Hendrick Automotive Group
Salary not disclosed
Hendrick Chrysler Dodge Jeep Ram FIAT of Concord Location: 7630 Hendrick Auto Plaza NW, Concord, North Carolina 28027 Summary: To process the shipping and receiving of parts through the Parts Department.
Pay Range: $18.50 per hour.
Part-Time Schedule Requirements: Flexible weekly schedule Monday-Saturday between 6:00AM-5:00PM.
Average 25 hours per week, candidates must be able to work the Part-Time schedule requirements on a regular basis.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Controls receipt of inventory Receives incoming shipments, checking the packing slip with actual shipment for completeness and accuracy before placement in appropriate warehouse location Identifies and reports all overages and shortages Stocks parts and accessories in correct bin locations Notifies appropriate personnel of receipt of all special orders Performs inventory test counts as directed by management Loads and unloads trucks May operate a forklift to move materials and unload vehicles Maintains an organized, clean and safe work area Maintains CSI at or above company standards Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting o Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous warehouse experience desired.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic computer skills needed to utilize the company timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to stand; walk; and sit.
Must be able to lift up to 50 pounds.
Work includes frequent movement around the dealership facilities and the outdoor car lot and movement in and out of cars.
Environment Demands: Duties are performed primarily in the Parts Department.
Work includes moving throughout the Parts Department and frequent moving and shelving of parts.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Pay Range: $18.50 per hour.
Part-Time Schedule Requirements: Flexible weekly schedule Monday-Saturday between 6:00AM-5:00PM.
Average 25 hours per week, candidates must be able to work the Part-Time schedule requirements on a regular basis.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Controls receipt of inventory Receives incoming shipments, checking the packing slip with actual shipment for completeness and accuracy before placement in appropriate warehouse location Identifies and reports all overages and shortages Stocks parts and accessories in correct bin locations Notifies appropriate personnel of receipt of all special orders Performs inventory test counts as directed by management Loads and unloads trucks May operate a forklift to move materials and unload vehicles Maintains an organized, clean and safe work area Maintains CSI at or above company standards Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting o Automotive o Business o Human Resources o Information Technology Desired Work Experience: √ up to 3 years o 3-5 years o 5+ years Education/Experience: Previous warehouse experience desired.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Basic computer skills needed to utilize the company timekeeping system.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers and company personnel.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to stand; walk; and sit.
Must be able to lift up to 50 pounds.
Work includes frequent movement around the dealership facilities and the outdoor car lot and movement in and out of cars.
Environment Demands: Duties are performed primarily in the Parts Department.
Work includes moving throughout the Parts Department and frequent moving and shelving of parts.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
temporary
H
Estimator
🏢 Hendrick Automotive Group
Salary not disclosed
Northlake Collision Location: 10510 Twin Lakes Parkway, Charlotte, North Carolina 28269 Summary: Responsible for identifying and documenting necessary body repair work for customers.
Responsible for scheduling body work to be performed.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Schedules appointments with customer.
Works with customer and Collision Center Technician to identify required repair work.
Offers additional services and repairs to customers.
Computes cost of replacement parts and labor to restore vehicle to condition specified by customer.
Enters itemized estimate on repair order and explains estimate to customer.
Meets Collision Center standards for repair/order production.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting o Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years √ 3-5 years o 5+ years Education/Experience: Working knowledge of the body repair methods.
Strong interpersonal and persuasive selling skills.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate knowledge of Microsoft Office products.
Ability and knowledge of Collision Center Management System and additional software programs to support operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers, company personnel and insurance adjusters.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to stand, walk, and sit.
May be exposed to load noise, vibration, paint-dust, and other body repair shop conditions.
Environment Demands: Duties are generally performed in the Collision Center area.
Work includes inspection of customer vehicles and frequent movement around the body repair shop to convey information between customers and Collision Center Technicians.
Frequently interacts with customers, Collision Center Manager, Collision Center Technicians, and Company personnel.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Responsible for scheduling body work to be performed.
Supervisory Responsibilities: This job has no direct supervisory responsibilities.
Essential Duties and Responsibilitiesinclude the following: Schedules appointments with customer.
Works with customer and Collision Center Technician to identify required repair work.
Offers additional services and repairs to customers.
Computes cost of replacement parts and labor to restore vehicle to condition specified by customer.
Enters itemized estimate on repair order and explains estimate to customer.
Meets Collision Center standards for repair/order production.
Maintains CSI at or above Company standards Maintains an organized, clean and safe work area Participates in required training Records all hours worked accurately in company timekeeping system Follows Safeguards rules and regulations.
Demonstrates the Company’s Core Values Complies with Company policies and procedures Observes all Federal, State, Local and Company safety rules and regulations in the performance of duties.
Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with medical conditions to perform the essential functions.
Desired Education: o GED √ High School Diploma o Associate Degree o Bachelor Degree o Master Degree o Doctorate Degree Field of Study/Work Experience: o Accounting o Automotive o Business o Human Resources o Information Technology Desired Work Experience: o up to 3 years √ 3-5 years o 5+ years Education/Experience: Working knowledge of the body repair methods.
Strong interpersonal and persuasive selling skills.
Certificates and Licenses: √ Valid Driver’s License o Automobile Salesperson License Computer Skills: Intermediate knowledge of Microsoft Office products.
Ability and knowledge of Collision Center Management System and additional software programs to support operations.
Communication Skills: Ability to understand and follow instructions.
Ability to communicate effectively with customers, company personnel and insurance adjusters.
Attendance Expectations: The position requires regular and predictable attendance.
Scheduled shifts may include evening hours, weekends, and holidays.
Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear.
The employee is frequently required to stand, walk, and sit.
May be exposed to load noise, vibration, paint-dust, and other body repair shop conditions.
Environment Demands: Duties are generally performed in the Collision Center area.
Work includes inspection of customer vehicles and frequent movement around the body repair shop to convey information between customers and Collision Center Technicians.
Frequently interacts with customers, Collision Center Manager, Collision Center Technicians, and Company personnel.
Verbal and Writing Ability: Ability to read and comprehend instructions, correspondence, and memos.
Ability to effectively present information in one-on-one and small group situations to customers and other employees.
Math Ability: Ability to add, subtract, multiply and divide.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions.
Ability to deal with standardized situations.
Ability to understand and follow technical manuals.
Core Values: To perform the job successfully, an individual should demonstrate the following Core Values: Servant Leadership Servant Leaders consciously put the needs of others before their own, because to serve people is to value them.
Teamwork through Trust & Respect Diversity is strength, and when we trust and respect one another we can work as a team to achieve at a high level.
Integrity Being honest and transparent with people, in an effort to do the right thing within the letter and spirit of the law, drives every action we take and every decision we make.
Commitment to Customer Enthusiasm Every day we recommit ourselves to the customer experience, and we are empowered to exceed the expectations of our customers.
Passion for Winning Hendrick’s tradition of winning is based on the idea of striving to be the best, not the biggest, and is therefore defined by how we treat our people.
Accountability at All Levels Taking ownership of our actions and our decisions allows us to grow as individuals, and support each other as a team.
Commitment to Continuous Improvement Every day we soften our hearts as well as our egos, in order to seek out and improve upon areas of opportunity within ourselves and our team.
This job description in no way states or implies that these are the only duties and responsibilities to be performed by this employee.
The employee will be required to follow any other instructions and to perform any other duties and responsibilities upon the request of a supervisor.
This job description is subject to revision at the discretion of the company.
Hendrick is an Equal Opportunity employer.
Minorities, women, veterans, and individuals with disabilities are encouraged to apply.
For more information regarding the EEOC, please visit .
Not Specified
O
Associate DevOps Engineer
Salary not disclosed
A financial firm is looking for an Associate DevOps Engineer to join their team in Charlotte, NC.
Compensation: $130-155k Responsibilities:
- Participate in full lifecycle development of SDLC and implement all DevOps procedures to manage and support the CI/CD process including the automation of the build, test, deploy pipelines and configuration management.
- Employ best practices for designing automation processes and utilities that can be easily used by the development teams.
- Design and develop a best practice release management process that employs separation of control and proper approvals.
- Closely partner with the security and infrastructure teams to incorporate corporate standards into the CI/CD and provisioning processes.
- Maintaining source control management system and integrating it with software build and deployment.
- Responsibility for the build environment: resolve build issues, help coordinate complex software test environments and software releases.
- Monitoring of Applications operational processes, escalating and facilitating failure resolution as appropriate.
Qualifications: Required
- 5+ years of professional experience of working with the full software development life cycle and designing/developing best practice CI/CD pipelines, GitHub Actions, Ansible (IaC), Terraform/CloudFormation, K8s, test automation, static code analysis, Artifactory and release management processes.
- Proficient in at least two of the following Windows batch/PowerShell, bash, Python.
- Knowledgeable about networking (TCP, UDP, ICMP, ARP, DNS, TLS, HTTP, SSH, NAT, firewall, load balancing, etc).
- Strong experience with managing and support of Windows/Linux Servers.
- Good understanding of deployment of various platforms such as web/REST API, messaging bus/queue, application services, Microservices and Cloud Serverless components/managed platform.
- Experience working with relational databases/SQL and no-SQL, other database technologies are a plus.
- A curiosity concerning technology and the ability to learn new systems and tools quickly.
- Excellent communication skills and the ability to work in a collaborative environment.
Preferred
- Experience with Cloud solutions i.e Azure (VNet, privateLink, Blob storage, Azure SQL, Web App, Data Factory, Client, AKS, ARO, SQL Server/Cosmos) / AWS (VPC, EC2, S3, Route53, ECS, EKS, RDS, ALB/NLB).
- Experience with code-quality (SonarQube, GitHub Enterprise Advanced Security/CodeQL, Jfrog Artifactory + Xray).
- Experience with containers and orchestration technologies (Docker, K8s, OpenShift).
- Experience with application telemetry, monitoring and alerting solutions (Splunk, LogicMonitor, AWS CloudWatch, Azure Insight or similar).
Compensation: $130-155k Responsibilities:
- Participate in full lifecycle development of SDLC and implement all DevOps procedures to manage and support the CI/CD process including the automation of the build, test, deploy pipelines and configuration management.
- Employ best practices for designing automation processes and utilities that can be easily used by the development teams.
- Design and develop a best practice release management process that employs separation of control and proper approvals.
- Closely partner with the security and infrastructure teams to incorporate corporate standards into the CI/CD and provisioning processes.
- Maintaining source control management system and integrating it with software build and deployment.
- Responsibility for the build environment: resolve build issues, help coordinate complex software test environments and software releases.
- Monitoring of Applications operational processes, escalating and facilitating failure resolution as appropriate.
Qualifications: Required
- 5+ years of professional experience of working with the full software development life cycle and designing/developing best practice CI/CD pipelines, GitHub Actions, Ansible (IaC), Terraform/CloudFormation, K8s, test automation, static code analysis, Artifactory and release management processes.
- Proficient in at least two of the following Windows batch/PowerShell, bash, Python.
- Knowledgeable about networking (TCP, UDP, ICMP, ARP, DNS, TLS, HTTP, SSH, NAT, firewall, load balancing, etc).
- Strong experience with managing and support of Windows/Linux Servers.
- Good understanding of deployment of various platforms such as web/REST API, messaging bus/queue, application services, Microservices and Cloud Serverless components/managed platform.
- Experience working with relational databases/SQL and no-SQL, other database technologies are a plus.
- A curiosity concerning technology and the ability to learn new systems and tools quickly.
- Excellent communication skills and the ability to work in a collaborative environment.
Preferred
- Experience with Cloud solutions i.e Azure (VNet, privateLink, Blob storage, Azure SQL, Web App, Data Factory, Client, AKS, ARO, SQL Server/Cosmos) / AWS (VPC, EC2, S3, Route53, ECS, EKS, RDS, ALB/NLB).
- Experience with code-quality (SonarQube, GitHub Enterprise Advanced Security/CodeQL, Jfrog Artifactory + Xray).
- Experience with containers and orchestration technologies (Docker, K8s, OpenShift).
- Experience with application telemetry, monitoring and alerting solutions (Splunk, LogicMonitor, AWS CloudWatch, Azure Insight or similar).
Not Specified
O
DBA
🏢 Open Systems Technologies
Salary not disclosed
A financial firm is looking for a DBA to join their team in Charlotte, NC.
Compensation: $150-175K Responsibilities: Design, implement, and maintain NoSQL database solutions including Cassandra and Postgres.
MongoDB is a plus Cassandra Cluster Administration Install, configure, and upgrade Cassandra clusters Manage nodes (add/remove nodes, decommissioning, replacements) Perform rolling restarts and version upgrades with minimal downtime PostgreSQL Database Administrator Installation, configuration, Performance Monitoring and tunning, High availability, Monitoring Monitor database performance and proactively address issues related to availability, latency, and data integrity Implement and maintain infrastructure as code (IaC) practices using tools like Ansible and Git Standardize and automate configuration of database environments across development, QA, and production Ensure consistency and compliance of system configurations through automated validation and reporting Collaborate with security and compliance teams to enforce configuration baselines and audit readiness Maintain documentation of configuration standards and change management procedures Develop automation scripts using Bash and Python to streamline database operations Manage infrastructure on Linux environment Work with cloud platform Azure to support hybrid and multi-cloud database deployments Utilize Ansible for configuration management and infrastructure automation Qualifications: 7+ years of experience in database engineering or a related field Experience in designing scalable and secure database architecture Professional experience with NoSQL technologies including Cassandra and Postgres Scripting, cloud platforms, and DevOps tools
Compensation: $150-175K Responsibilities: Design, implement, and maintain NoSQL database solutions including Cassandra and Postgres.
MongoDB is a plus Cassandra Cluster Administration Install, configure, and upgrade Cassandra clusters Manage nodes (add/remove nodes, decommissioning, replacements) Perform rolling restarts and version upgrades with minimal downtime PostgreSQL Database Administrator Installation, configuration, Performance Monitoring and tunning, High availability, Monitoring Monitor database performance and proactively address issues related to availability, latency, and data integrity Implement and maintain infrastructure as code (IaC) practices using tools like Ansible and Git Standardize and automate configuration of database environments across development, QA, and production Ensure consistency and compliance of system configurations through automated validation and reporting Collaborate with security and compliance teams to enforce configuration baselines and audit readiness Maintain documentation of configuration standards and change management procedures Develop automation scripts using Bash and Python to streamline database operations Manage infrastructure on Linux environment Work with cloud platform Azure to support hybrid and multi-cloud database deployments Utilize Ansible for configuration management and infrastructure automation Qualifications: 7+ years of experience in database engineering or a related field Experience in designing scalable and secure database architecture Professional experience with NoSQL technologies including Cassandra and Postgres Scripting, cloud platforms, and DevOps tools
Not Specified
G
Embedded Validation Engineer
✦ New
Salary not disclosed
Role Overview
We are seeking a technically strong Embedded Validation Engineer to serve as the Controls and Quality Assurance (QA) point of contact for lab validation and sustaining programs. The role focuses on requirements-based validation, disciplined test execution, defect reporting, and traceability across multiple product programs.
The ideal candidate will work closely with Systems Engineering, Product Development, and QA teams to validate embedded control systems, execute lab testing, and improve test automation and validation processes.
Key Responsibilities
Requirements-Based Validation
- Collaborate with Systems Engineering teams to derive validation strategies and test plans from system requirements.
- Develop and maintain requirement-to-test case traceability.
- Ensure validation activities align with product specifications and engineering requirements.
Lab Test Execution
- Serve as the Controls Validation Point of Contact (POC) for lab validation activities.
- Execute validation tests on prototype hardware and embedded control systems.
- Document test procedures and record pass/fail outcomes with technical accuracy.
Documentation & Traceability
- Maintain organized test documentation including test plans, execution logs, and validation reports.
- Ensure traceability between requirements, test cases, and defect reports.
Defect Reporting & Tracking
- Identify, document, and report defects with clear technical descriptions and reproducible steps.
- Collaborate with development teams to analyze root causes and track defect resolution.
Reporting & Quality Reviews
- Prepare concise 2–3 slide technical summaries of test results and validation findings.
- Present validation updates during PRQRB/SQA or departmental review meetings.
Test Bench & HIL Development
- Design and build test bench setups and Hardware-in-the-Loop (HIL) simulators for validation.
- Support legacy platforms and existing validation environments.
Automation Development
- Contribute to Python-based test automation and validation frameworks.
- Identify opportunities to improve test efficiency through automation.
Product Support & Continuous Improvement
- Support new product development, sustaining engineering, and validation process improvements.
- Drive enhancements in test infrastructure, lab workflows, and validation methodologies.
Required Qualifications
- Bachelor’s degree in Controls Engineering, Software Engineering, Electrical Engineering, or related field.
- 5+ years of experience in embedded systems validation, SQA, or controls testing.
- Strong understanding of Software Quality Assurance (SQA) fundamentals, including test execution and documentation.
- Experience validating embedded control systems and equipment controls.
- Hands-on experience with lab-based validation and prototype testing.
- Knowledge of controls inputs/outputs, sensors, and system interfaces.
- Experience with bench wiring, test setup, and instrumentation.
- Strong analytical skills and familiarity with engineering basics such as heat exchangers and unit conversions.
- Experience with Python scripting and test automation.
Not Specified
A
Technical Recruiter
✦ New
Salary not disclosed
Do you enjoy working with people? Do you like getting paid for the effort you put forth? Come join our team at Anistar Technologies!
As a member of the Anistar Recruiting Team, you will work alongside other sales minded individuals in a friendly, team-oriented environment to achieve a common goal. You will have the ability to impact job seekers by helping them find new positions and advance in their careers.
What You Will Learn:
Most of our recruiters have never done this before, so we train you from the ground up. During your training, you will learn the following:
- How to look at a technical job description and determine what the client is looking for
- How to find qualified candidates via our database and various job boards
- How to draft emails and text messages to generate a response from job seekers
- How to leave a voicemail that sparks interest and gets a candidate to call you back
- How to conduct a phone interview with a candidate to get a better understanding of their experience and determine whether it aligns with your job openings
- How to build a pipeline and grow your network so you can fill jobs faster
- How to negotiate salary and hourly rates
- How to schedule interviews and extend job offers
Typical Day:
- Perform full life-cycle recruitment functions including screening, interviewing, negotiating rates, reference checks, placement and termination of candidates/employees
- Develop relationships with managers to understand business and hiring needs
- Identify and attract both active and passive candidates by warm calling, job boards, referrals, and professional social networking sites
- Negotiated salary and hourly rates as well as closing of candidates
- Continuously build a network of skilled professionals
- Maintained relationships with current and past contractors and candidates
What we are looking for:
- Recent college graduates or professionals early in their career
- Competitive and motivated individuals who are looking for a career in recruiting and sales
- Outgoing personalities who aren’t afraid to make mistakes and ask questions
The Good Stuff:
- Uncapped commission – The more people you help get a job, the more money you make!
- No prior experience as we offer paid training
- Great culture – work alongside other sales minded individuals in a friendly, team-oriented environment
- Weekly Pay – Direct deposit every Friday
- Early Out Fridays - When your team reaches profit goals, you can leave Fridays as early as 2pm!
- Remote Day – You can earn a work from home day weekly – Pick whatever day you like!
- Weekly and Monthly Contests which earn you $$$ - Can be redeemed for gift cards or experiences
- Promote from within organization – everyone starts in the recruiter role, then can advance into senior, management, or outside sales roles
- Breakfast Fridays – company brings in breakfast every Friday!
- Weekly Team Lunches
- Monthly Outings – Sporting events, team building
- Year End Incentive Trip to tropical location – 3 day/4night all expenses paid
- Working hours are Monday – Friday, 8am – 5pm
- No cold calling, door knocking, or traveling required
- Fast paced, high volume recruiting where the days fly by
Benefits:
We offer valuable, competitive and affordable benefit options!
- Medical, Dental and Vision
- Health Savings Account (offered with qualified medical plan)
- 401k with 4% employer match (no enrollment waiting period!)
- Voluntary Life, STD & LTD Insurance
- Voluntary Supplemental Insurance (Accident, Critical Illness & Whole Life)
- Identity Theft Protection
- Legal Assistance
- Paid Holidays
- Paid Time Off
- Training and Career Growth Opportunities
About Us:
At Anistar Technologies, we connect individuals from a variety of industries with respected companies, both nationally and internationally. Each day, our Recruiters are presenting our clients with talented industry professionals for their most in-demand positions. To accomplish this, the Anistar staffing team will invest the time to understand your goals, work experiences, and career objectives. To search for other exciting opportunities in your area, visit our website at Technologies is an Equal Opportunity Employer and is dedicated to fostering diversity in the workplace. Anistar utilizes E-Verify. Interested Candidates, click Apply now!
Not Specified
G
Embedded Validation Engineer - Python and HVAC
✦ New 🏢 Global Connect Technologies
Salary not disclosed
Job Title: Embedded Validation Engineer
Location: Charlotte, NC
Job Type: Full-Time
Role Overview
We are seeking a technically strong Embedded Validation Engineer to serve as the Controls and Quality Assurance (QA) point of contact for lab validation and sustaining programs. The role focuses on requirements-based validation, disciplined test execution, defect reporting, and traceability across multiple product programs.
The ideal candidate will work closely with Systems Engineering, Product Development, and QA teams to validate embedded control systems, execute lab testing, and improve test automation and validation processes.
Key Responsibilities
Requirements-Based Validation
- Collaborate with Systems Engineering teams to derive validation strategies and test plans from system requirements.
- Develop and maintain requirement-to-test case traceability.
- Ensure validation activities align with product specifications and engineering requirements.
Lab Test Execution
- Serve as the Controls Validation Point of Contact (POC) for lab validation activities.
- Execute validation tests on prototype hardware and embedded control systems.
- Document test procedures and record pass/fail outcomes with technical accuracy.
Documentation & Traceability
- Maintain organized test documentation including test plans, execution logs, and validation reports.
- Ensure traceability between requirements, test cases, and defect reports.
Defect Reporting & Tracking
- Identify, document, and report defects with clear technical descriptions and reproducible steps.
- Collaborate with development teams to analyze root causes and track defect resolution.
Reporting & Quality Reviews
- Prepare concise 2–3 slide technical summaries of test results and validation findings.
- Present validation updates during PRQRB/SQA or departmental review meetings.
Test Bench & HIL Development
- Design and build test bench setups and Hardware-in-the-Loop (HIL) simulators for validation.
- Support legacy platforms and existing validation environments.
Automation Development
- Contribute to Python-based test automation and validation frameworks.
- Identify opportunities to improve test efficiency through automation.
Product Support & Continuous Improvement
- Support new product development, sustaining engineering, and validation process improvements.
- Drive enhancements in test infrastructure, lab workflows, and validation methodologies.
Required Qualifications
- Bachelor’s degree in Controls Engineering, Software Engineering, Electrical Engineering, or related field.
- 5+ years of experience in embedded systems validation, SQA, or controls testing.
- Strong understanding of Software Quality Assurance (SQA) fundamentals, including test execution and documentation.
- Experience validating embedded control systems and equipment controls.
- Hands-on experience with lab-based validation and prototype testing.
- Knowledge of controls inputs/outputs, sensors, and system interfaces.
- Experience with bench wiring, test setup, and instrumentation.
- Strong analytical skills and familiarity with engineering basics such as heat exchangers and unit conversions.
- Experience with Python scripting and test automation.
Not Specified
G
Electrical Test Engineer - Three Phase and Motors
✦ New 🏢 Global Connect Technologies
Salary not disclosed
Job Title: Electrical Test Engineer - Three Phase and motor
Location: Charlotte, NC
Job Description
This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.
Key Responsibilities
· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)
· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems
· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers
· Develop and review electrical test procedures, wiring diagrams, and control schematics
· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals
· Troubleshoot electrical, controls, and communication issues during system testing
· Analyze test data and prepare technical reports documenting results, issues, and corrective actions
· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)
· Collaborate with design engineering teams to identify root causes and recommend design improvements
· Support factory acceptance testing (FAT), qualification testing, and reliability testing
· Ensure testing activities comply with lab safety procedures and electrical safety requirements
· Provide technical support during audits, certifications, and customer witness testing
Required Qualifications
· Bachelor’s degree in Electrical Engineering or related field
· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)
· Strong understanding of three-phase power systems, motor drives, starters, and VFDs
· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)
· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)
· Ability to read and interpret electrical schematics and wiring diagrams
· Strong troubleshooting and problem-solving skills
· Proficiency in technical documentation and test reporting
· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)
Preferred Qualifications
· Experience with commercial chillers, large HVAC equipment, or refrigeration systems
· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335
· Experience working in an engineering laboratory or test environment
· Knowledge of energy efficiency testing and performance certification
· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)
· Professional Engineer (PE) license or EIT certification
Key Competencies
· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery
· Occasional extended hours during test execution or customer witness testing
· Strict adherence to safety protocols and PPE requirements
Not Specified
jobs by
✓ All jobs loaded