Ignition Wire Numbers Jobs in Usa

• 
  
• Assembling and wiring completely aircraft electrical, radio, and radar units such as main junction and terminal boxes, main engine disconnect plug, main control, switch panels, radio panels, and instrument panels
  
• Completing hookup of wiring, flexes, and cables, and troubleshooting electrical and radio assemblies having multiple interconnected units and accessories
  
• Forming and running harnesses, breaking out and terminating wiring to terminal points where wire routing and location of electrical units and accessories are established by jig board layouts
  
• Making continuity checks (including necessary operation) of above assemblies and harnesses as required, and selling same to inspection
  
• Fabricating completely hi-voltage radio and radar cables that require the soldering of multiple wires, shields, tubes, connectors, pins, washers, spacers, and cores
  

Performs basic and routine electronic assembly operations on components or subassemblies. Perform Die Attach, Wire bond, Epoxy Dispense, Flip chip, Wafer Die Eject, Die Attach Films, Material Handling Loaders and Unloaders, Conveyors, Screen and Stencil Printing, Chip Shooter/Passive Component Attach.

• Technical knowledge of Die Attach, Wire bond, Epoxy Dispense, flip Chip, Wafer Die Eject, Die Attach Films, Material Handling Loaders and Unloaders, Conveyors, Screen and Stencil Printing, Chip Shooter/Passive Component Attach
• This position will be required to set up and run K&S ICONN Wire bonders, XYZ-Tec, and West Bond wire pull equipment. In addition, you will set up and run Besi Datacon 2200, Yamaha Chip Shooter, and EKRA printers.
• Clean PCB's and assemblies throughout process and after completion Maintain logs and paperwork and forms accurately consistent with company policy and practices.
• Must continuously meet/exceed production schedules and deadlines according to quality standards
• Other duties as assigned
• Performs a wide variety of electrical/mechanical product assembly operations on assemblies.
• Prepares assembly work to be accomplished by studying assembly instructions and following blueprint specifications.
• Using assembly drawings and related paperwork (Router, Pick List, bill of materials) to accompany parts through production flow
• Using written instructions to assemble, modify, rework, or reassemble units
• Performs basic and routine electronic assembly operations on components or subassemblies
• Maintains daily records and periodically summarizes activities
• May occasionally be required to work overtime
• Interface with Engineers and Program Managers
• Ability to operate and multi-task between 2 to 3 machines
• Knowledge of the scope of equipment is inherent in this position
• Process transactions on the Oracle (ERP) system

• Knowledge of the scope of equipment is inherent in this position
• Using written instructions to assemble, modify, rework, or reassemble units
• Must continuously meet/exceed production schedules and deadlines according to quality standards
• Interface with Engineers and Program Managers
• Ability to operate and multitask between 2 to 3 machines
• Maintains daily records and periodically summarizes activities
• May occasionally be required to work overtime
• Hand and eye coordination

• This position will be required to set up and run K&S ICONN Wire bonders, XYZ-Tec, and West Bond wire pull equipment. In addition, you will set up and run Besi Datacon 2200 Die Attach machines, Yamaha Chip Shooter, Asymtek epoxy dispense, and EKRA printers.
• Technical Knowledge of Die Attach, Wire bond, Epoxy Dispense, flip Chip, Wafer Die Eject, Die Attach Films, Material Handling Loaders and Unloaders, Conveyors, Screen and Stencil Printing, Chip Shooter/Passive Component Attach

This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.

Electrical Technician - Harness Assembly

Albuquerque, New Mexico

We are seeking an experienced Electrical Technician with a strong background in harness assembly to support the production and integration of electrical systems for our Aerospace client This role is hands-on and requires a deep understanding of electrical wiring, cable harness fabrication, and aerospace-grade standards.

Job Purpose:

• Harness Fabrication & Assembly – Build, route, and install electrical harnesses, ensuring proper terminations, crimping, and soldering according to aerospace standards.
• Wiring & Integration – Assist in the assembly and installation of electrical components, including connectors, circuit boards, and avionics systems.
• Blueprint & Schematic Interpretation – Read and interpret electrical schematics, wiring diagrams, and engineering drawings to ensure accurate builds.
• Testing & Troubleshooting – Perform continuity tests, insulation resistance checks, and troubleshooting to verify harness integrity.
• Quality Control & Compliance – Ensure all work meets industry and company quality standards, adhering to safety and aerospace regulations.
• Collaboration – Work closely with engineers and other technicians to support system integration and problem-solving efforts.

Experience Required:

• 3+ years of experience in electrical harness assembly, wiring, or related field
• Proficiency in crimping, soldering, and connector assembly
• Ability to read and work from engineering drawings, schematics, and wiring diagrams
• Strong understanding of cable routing, strain relief, and aerospace/automotive wiring standards
• Hands-on experience using tools such as wire strippers, heat shrink tubing, and torque wrenches
• Excellent attention to detail and ability to work in a fast-paced environment

Desirable Experience:

• Experience working in aerospace, aviation, or high-tech manufacturing
• IPC/WHMA-A-620 certification or similar (preferred but not required)
• Familiarity with electrical testing equipment (multimeters, continuity testers, etc.)
• Ability to adapt and troubleshoot in a dynamic R&D environment

If you are interested then please apply today.

Wire Harness and Routing Design Engineer

Location: Tucson, Arizona

Duration: 12 Months of Contract with possibility of extension

Schedule: Mon-Fri

Pay range: $48 - $54 Hourly on W2

Seniority Level - Mid to Senior - 06+ years of overall experience

Typical task breakdown:

• Design wire harness routings, support detailing, and checking prints.
• Prepare and present at design reviews.
• Ensure designs follow design guides and best practices.
• Collaborate with suppliers.
• Support, cost rollups, FMEA, TFCs, Supplier collaboration, etc.

Additional Technical Skills:

(Required)

• Electrical Harness Design Experience (hydraulic integration design could also be considered)
• Extensive Creo, Teamcenter, and/or Fluid lines experience
• FMEAs
• Experience in reading electrical drawings and schematics
• Experience of using Microsoft Office computer tools (Excel, PowerPoint)
• Technical problem solving
• Ensure designs follow design guides and best practices.

(Desired)

• Ability to troubleshoot wiring and wire/cable mounting issues.
• 3D clearance checks
• TeamCenter Vis Mockup

Soft Skills:

(Required)

• Good communication skills (verbal and written).
• Great attention to detail.
• Team and cross-functional collaboration.

Job Title– Electrical Engineer

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

The opportunity

Delaware North Gaming is hiring full-time and part-time Food Runners to join our team at Southland Casino in West Memphis, Arkansas. As a Food Runner, you will be responsible for expediting food from the kitchen to our guests as quickly as possible while responding to changing needs in the restaurant.

With training opportunities and mentorship, this is your chance to grow your skills at a leading hospitality company. Apply today to get started.

Please note this is a tipped position; the hourly minimum pay listed doesn’t include any potential tipped earnings.

Pay

$15.00 - $16.00 / hour

Information on our comprehensive benefits package can be found at .

What we offer

We care about our team member’s personal and professional well-being. Delaware North provides a benefits package designed to give you the comfort, safety, and security you need to deliver exceptional experiences for our guests. All team members receive benefits including:

• Weekly pay
• Training and development opportunities
• Employee discounts
• Flexible work schedules

Eligible team members may also receive: health, dental, and vision insurance, 401(k) with company match, paid vacation days and holidays, paid parental bonding leave, employee assistance program, and tuition and/or professional certification reimbursement.

What will you do?

• Attend pre-shift briefing, taking note of important service information
• Collaborate with Chef, kitchen team members, and servers to ensure timely preparation and delivery of food; assist with the assembly of dishes
• Complete any required table-side service, which may include taking and delivering orders and explaining the menu to guests
• Maintain a comprehensive knowledge of all menu items, ingredients, and preparations; be able to identify menu items and ingredients by appearance
• Maintain kitchen and dining room cleanliness and organization

More about you

• At least 1 year of experience or training as a Runner or Busser with a similar style of dining, capacity, and volume preferred
• Ability to work flexible hours, including nights, weekends, and holidays, as needed
• No high school diploma or GED required

Physical requirements

• Constant standing, walking, bending, reaching, and repetitive motions; may include walking up and down stairs
• Ability to lift to 35 pounds for set-up, service, and clean-up
• Ability to maneuver between tables and around corners
• Visual acuity and hearing sufficient to take orders and prepare checks

Shift details

Evenings
Every weekend

Who we are

Southland Casino Hotel, owned and operated by Delaware North, features more than 2200 slot machines, live blackjack, craps, and roulette tables, simulcast wagering, and sportsbook. Our new hotel features 300 luxurious rooms and suites. Southland is located in West Memphis, Arkansas, only a short drive from downtown Memphis, Tennessee.

Our business is all about people, and that includes you. At Delaware North, you’re not just part of a team — you’re part of a global legacy: a family-owned company with 100+ years of history behind it. Our operations span the world, offering you unique paths to growth and success.

Who says you can't love where you work? With jobs in iconic sports arenas, stunning national parks, exciting casinos, and more, we pride ourselves on giving the world great times in great places. And whether you're interested in restaurants, hotels, sports, gaming, operations, or retail, part-time or full-time, we're invested in helping you achieve your career goals.

Together, we're shaping the future of hospitality — come grow with us!

Delaware North, along with its subsidiaries, is an equal opportunity employer, showcasing job opportunities and considering applicants for all positions without regard to race, color, religion, sex, gender identity, national origin, age, disability, protected veteran status, sexual orientation, or any other legally protected status.

Our Company

Hi-Wire Brewing is an established regional brewery based in Asheville, NC, specializing in approachable and balanced lagers, ales and alternative beverages. Hi-Wire has 7 taprooms located across NC and TN and distribution to 8 states (NC, SC, TN, KY, OH, GA, AL, and VA). Since opening our first location in 2013, our hard-working, creative, and passionate team has been recognized with several accolades, being the most decorated independent brewery in Asheville.  Our core values, Be your Best, Lift Each Other Up and Create Amazing Experiences, guide our daily actions.  The vision for our retail spaces is more than just a taproom - we strive to be a community driven third space known for best in class hospitality - a place locals love and tourists put at the top of their list.  

Position Description

The Taproom Manager at Hi-Wire Brewing is responsible for cultivating and managing a cohesive team that shares a common vision of delivering an exceptional experience to every guest who walks through the door. The individual in this position is able to successfully oversee daily operations of the taproom, drive business forward in line with company goals and contribute significantly to strategic and financial planning . This is a permanent full-time, exempt position. Performance is tracked via quarterly KPIs and yearly performance reviews.  This position reports to the Regional Manager of Taprooms.

 Responsibilities

● Oversee and manage all areas of the taproom, including hiring, developing and managing the performance of employees, maintenance, and inventory

● Ensure a safe working and guest environment to reduce the risk of injury and accidents

● Serve as point person for daily decision making, scheduling, and planning, while upholding standards, product quality and cleanliness

● Maintain physical taproom space, ensuring maintenance (both ongoing and emergency) are completed in a timely manner and within allotted budget

● Prepare schedules and ensure that the taproom is staffed for all shifts, filling in as needed

● Investigate and resolve complaints concerning beer quality and/or service

● Keep Supervisor promptly and fully informed of all issues (i.e. problems, unusual matters of significance, positive events) and take prompt corrective action or suggest alternate courses of action, where necessary

● Be involved with the local community, attending neighborhood business meetings, participating in community events and fostering goodwill between the taproom and the community at large

● Manage taproom inventory, placing orders for beer, merchandise, and other supplies as needed

● Ensure money is handled responsibly, including making regular bank deposits and procuring sufficient change for taproom transactions

● Be fully knowledgeable of and adhere to sanitation, safety, and alcohol beverage control policies

● Take a leadership role in events, effectively planning, scheduling, and preparing for events to ensure success

● Effectively communicate with the marketing team, in a timely and efficient manner, to ensure proper advertising for taproom events

● Be present for team meetings as requested

● Manage taproom social media accounts in collaboration with the marketing team, and support broader marketing efforts as directed, including templated assets and capturing photography

● Complete other tasks as assigned, staying within provided budgets and time frames

Compensation

Hi-Wire Brewing offers competitive pay, health/dental/vision insurance, life insurance, and ample paid time off.

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

● High school diploma or equivalent

● At least 5 years of experience in the service industry

● Preferred front-of-house management experience

● Excellent customer service skills

● Ability to multitask while maintaining a calm demeanor

● Proficiency in applicable operations management systems

● A team player with leadership skills

● Exceptional multitasking/prioritizing skills

● Strong attention to detail

● Independent/self motivated

● Problem solver with grace under pressure

● Ability to adapt/think on your feet

● A flexible schedule with the ability to work nights and weekends

● Physical Requirements:

○ Must be able to continually lift 65 pounds

○ Must have the ability to regularly stand, walk, use hands, reach, climb, work from heights, stoop, kneel and crouch

○ The ability to work near moving parts and machinery

○ The ability to work in loud, wet, cold, hot, indoor and outdoor environments frequently

PAY

● Hi-Wire offers very competitive pay, a lucrative bonus structure, and profit share structure for growth

Hi-Wire Brewing is an Equal Employment Opportunity employer.

National Wire LLC, founded in 1995 and based in Conroe, Texas, is a leading manufacturer of welded wire products servicing the southern US. With a 75-acre production facility, the company produces high-quality wire products for construction, agriculture, and various industrial sectors, including Welded Wire Reinforcement, Engineered Mesh, and Building Mesh. Committed to meeting ASTM standards, National Wire prioritizes operational excellence, customer satisfaction, and technical innovation. National Wire has built a strong reputation for quality and reliability, earning long-standing trust and loyalty from customers nationwide.

This is a full-time, on-site position as a Fulfillment & Logistics Supervisor, based in Houston, TX. The primary responsibilities include managing daily operations related to logistics and fulfillment, ensuring efficient inventory management, and overseeing a team to guarantee high performance. The Supervisor will work closely with the customer service department to maintain customer satisfaction while implementing operational improvements and coordinating inbound and outbound shipments effectively.

• Strong Supervisory Skills and effective team leadership capabilities
• Proficiency in Operations Management and streamlining day-to-day processes
• Excellent Communication skills to interact with team members and customers
• Experience in Customer Service to maintain high standards of satisfaction and loyalty
• Knowledge of Inventory Management and related operational tools
• Problem-solving abilities and attention to detail
• Familiarity with logistics and supply chain practices
• Relevantly related experience or education, such as a degree in Logistics or Operations Management, is a plus

About the Company

US Wire Group is the parent of three independent companies (five manufacturing facilities) which produce steel wire and cable/wire related products that serve many industries. The independent business model fosters entrepreneurship and growth and allows professional development at all levels. US Wire Group is part of the Metals Processing Group and wholly owned by The Heico Companies, LLC. Our philosophy of developing a close customer contact to provide prompt, responsive service and to meet our customer's changing needs allows us to be leaders within our respective industries. Products are marketed domestically through a direct sales force, manufacturer's representatives and an established network of independent distributors. Our company is diverse and has a solid management base, product/market niches and efficient manufacturing capabilities.

About the Role

Supervises and coordinates activities of workers engaged in operating variety of machines to manufacture parts or products by performing the following duties.

Responsibilities

• Supervise employees in production departments, including training, motivation and discipline.
• Maintain a professional and respectful work environment, including maintaining confidentiality regarding supervisory and management matters.
• Mentor, lead and provide direction for employees.
• Recommends to plant management procedures, systems, equipment and machinery alterations to reduce costs, resolve problems, ensure product quality, reduce scrap and improve production efficiency.
• Initiates work orders for maintenance and repair of machinery, equipment, and vehicles.
• Audits hourly employee’s timecards for accuracy to ensure correct charges against production assignments, and updates payroll electronic timecards.
• Administers and enforces company rules, regulations and policies.
• Ensures compliance of safety programs for personnel and machinery.
• Serves as Company representative in first step grievance proceedings as required by the Plant Manager and/or Human Resources Manager.
• Evaluates employee’s overall performance, establishing goals and objectives for proper manufacturing techniques.
• Maintains established housekeeping standards.
• Ensures that all reasonable measures are taken to control the handling and use of materials used in the production process, known to be toxic and/or hazardous.
• Interfaces with others in the organization to ensure customer deadlines are met.
• Inspects and measures parts and products to verify conformance to specifications.
• Directs workers in adjusting machines and equipment to repair products which fail to meet standards.
• Establishes or adjusts work procedures to meet production schedules.
• Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of product.
• Analyzes and resolves work problems or assists workers in solving work problems.
• Other Duties as Assigned

Qualifications

• High School or Equivalent, Bachelor’s Degree preferred or equivalent experience.
• 2 or more years of Supervisory experience in manufacturing preferred.
• Must be 18 years or older due to work environment and labor laws.
• Must be able to pass preemployment background, drug/alcohol, and physical screenings.
• Must be able to understand various tags and labels used in the mill.
• Must be able to read and understand production schedule and production cards.
• Must be able to use bar code reader.
• Must be able to work independently, as a team, and be able to work with both internal and external customers.

Required Skills

• Ability to think strategically and problem solve.
• Excellent time management, project coordination and organizational skills.
• Strong analytical skills and ability to leverage data to make/gather support for business decisions.
• Must be able to apply concepts of basic algebra and geometry, as well as calculate figures and amounts such as: discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to think strategically and solve practical problems and deal with a variety of variables in situations where only limited standardization exists.
• Ability to carry out supervisory responsibilities in accordance with the organization's policies and applicable laws.
• Strong team building and team-participation skills.
• Ability to both teach and learn.
• Strong oral and written communication skills with an ability to communicate with all levels of the organization and work in a team environment.
• Must be proficient in MS Office Suite (Excel, Word, Outlook, etc.).
• Available to work shift schedule of 12 days on 2 days off, 4-10’s, and/or 3-12’s.
• Authorized to work for any employer in the United States of America.
• Must be able to use portable welder, hoist, pliers, bolt cutters, wire cutters, pulley with chain, micrometer, and various other hand tools.

Physical Requirements

• Must be able to use a variety of hand tools such as wrenches, screwdrivers, hammers, etc.
• Must be able to work in a dusty environment around metals.
• Sight – hand and eye coordination, depth perception needed to operate, adjust, and quantify chemicals and equipment, vision sufficient to inspect work areas and building for issues and operate computers.
• Hearing – must be able to hear others and warning sounds of forklift and other heavy machinery.
• Speech – must be able to communicate effectively with others while working.
• Smell – must be able to smell various chemicals and gasses.
• Must be able to sit, stand, and walk for long periods – frequent to constant.
• Must be able to squat, stoop, twist, climb, crawl, reach, grasp, and fine manipulation, and bend occasional to frequent.
• Must be able to lift/carry 50+ lbs - occasional.

Reports to: Plant Manager

Location: Phoenix, AZ

Service Wire is a premier manufacturer of industrial, utility, and commercial wire and cable. Our regional manufacturing location in Phoenix is seeking a conscientious and team-oriented Production Manager to join our organization in this full-time position.

Position Summary:

The Production Manager is responsible for leading and overseeing all manufacturing operations to ensure safe, efficient, and cost-effective production that meets company quality, delivery, and performance objectives. This role drives the facility’s safety culture, coordinates production planning and execution, and provides leadership to production supervisors and teams. The Production Manager partners closely with Planning, Maintenance, and Engineering to optimize throughput, minimize downtime, control costs, and support continuous improvement initiatives while fostering a positive, engaged, and accountable workforce.

Task/Duties/Responsibilities:

• Drive our Safety Culture throughout the facility to ensure the safety of employees, visitors, and contractors
• Interface with production planner to establish priorities and sequences for manufacturing products
• Coordinate production activities through planning with managers to ensure the total manufacturing objectives are accomplished in a timely and cost-effective manner
• Coordinate with Maintenance and Engineering to resolve manufacturing problems to ensure minimum costs and delays
• Promote safe work practices and demonstrates a zero tolerance for non-compliance with safe work practices, policies and regulations
• Provide leadership to accomplish the company goals and objectives
• Provides direction, development and leadership to production supervisors
• Build and engage employees that support our goals and objectives
• Develops or revises standard operational and working practices and ensures positive work environment
• Leads, encourages and supports continuous improvement projects
• Implement cost effective systems of control over capital, operating expenditures, people management, wages and salaries.
• Establish and monitor overall plant performance for production and quality standards.
• Control and minimize labor overtime and supply disruptions
• Assist in maintaining existing plant facilities and equipment; replace, or make adjustments to plant facilities and equipment when necessary
• Works with maintenance to maximize uptime and maintain preventative maintenance programs
• Incorporates shop floor organization and plant cleanliness among plant personnel

Knowledge/Skills/Requirements:

• Bachelor’s degree in business or related engineering field along with 5+ years of leadership experience in a manufacturing environment or equivalent combination of education and experience
• 5+ years of proven manufacturing leadership experience required
• Knowledge of wire and cable products and processes preferred
• Ability to apply technical knowledge or experience to define problems, generate alternatives, and execute solutions
• Demonstrated ability to perform customary management and supervisory responsibilities, including goal setting, planning, direction, training and evaluation
• Proven ability to lead a team
• Must possess excellent verbal and written communication skills along with exceptional interpersonal skills
• Ability to effectively communicate our goals and objectives to a team and convey the part they play in achieving those goals

National Operations Manager

Full-Time

Remote, United States

Travel Required (Up to 70%)

CME Wire and Cable is seeking a strategic and results-driven National Warehouse Manager to lead U.S. warehouse, distribution, logistics, and commercial planning operations. This role is responsible for ensuring safe, compliant, efficient, and cost-effective supply chain operations aligned with long-term business and commercial objectives.

Key Responsibilities

• Lead safe and compliant warehouse operations across multiple U.S. distribution centers

• Ensure regulatory compliance including OSHA, environmental standards, Fire Department requirements, Department of Labor regulations, and CTPAT

• Oversee inbound logistics from Mexico and South America into the U.S., ensuring CBP compliance

• Manage U.S. warehouse capacity planning, space optimization, and lease negotiations

• Negotiate and manage transportation carriers and logistics service providers

• Track and improve on-time delivery performance

• Drive demand planning and optimize inventory levels balancing storage capacity, fill rate, and commercial goals

• Coordinate production planning with manufacturing plants

• Design and implement finished goods distribution processes

• Ensure adherence to inventory policies and controls

• Lead short- and mid-term commercial planning processes (Demand Estimates, POC, Distribution Reports, Bookings Reports)

• Consolidate sales forecasts, operational performance, and market projections

• Develop business cases to support growth and investment initiatives

• Monitor customer service performance and marginal contribution

• Partner with Sales to define regional and national commercial growth strategies

• Lead initiatives to accelerate growth and close competitive gaps

• Improve customer satisfaction through service excellence initiatives

• Analyze market and competitive trends to support strategic decision-making

• Strengthen strategic relationships with customers and key commercial partners

Qualifications

• 8+ years of experience in operations, supply chain, logistics, or commercial operations leadership

• Multi-site warehouse and distribution management experience

• Strong knowledge of U.S. regulatory compliance (OSHA, CBP, CTPAT preferred)

• Experience managing international inbound logistics

• Proven transportation negotiation experience

• Strong analytical, financial, and strategic planning skills

• Bachelor’s degree required; MBA preferred

Equal Opportunity Employer Statement

CME Wire & Cable, Inc. is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. CME Wire & Cable, Inc. makes hiring decisions based solely on qualifications, merit, and business needs at the time. For more information, read through our EEO Policy.

Benefits

401(k)

401(k) matching

Dental insurance

Vision insurance

Health insurance

Life insurance

Paid time off

Electrical Maintenance Mechanic ***$5000 Hiring Bonus***

Position specifics:

Location: Charter Wire – 7850 N. 81st Street, Milwaukee, WI 53222

Shift: 10:00 PM – 6:00 AM, Sunday night - Friday morning

Why Work Here:

SCHEDULE: Get a dependable 8-hour first shift, Monday–Friday, with occasional overtime.

BENEFITS: Access great benefits like medical, dental, vision, 401(k) match, and paid time off.

GROWTH: Expand your skills with on-the-job training, process improvement opportunities, and internal advancement—we promote from within.

SAFETY: Work in an environment committed to safety and continuous improvement.

STABILITY: Join an established Midwest company with four generations of family ownership.

What You’ll Do:

As an Electromechanical Technician, you’ll play a critical role in maintaining, troubleshooting, and repairing production machinery. You'll work with both mechanical and electrical systems across high-speed stamping presses, cold forming machines, and automated equipment in a dynamic production environment.

• Maintain and troubleshoot electromechanical equipment using hand tools, welding equipment, and measuring devices

• Perform preventive maintenance to reduce downtime and ensure equipment reliability

• Diagnose and resolve issues using technical documents such as blueprints, schematics, and manuals

• Collaborate with cross-functional teams to support continuous improvement

• Follow safety protocols and use appropriate PPE

• Support process improvements and participate in ongoing training

What You’ll Need:

• 5+ years of industrial maintenance experience or technical degree in a related field or journeyman’s card.

• Proficiency in reading complex electrical schematics and code books

• Broad knowledge of electrical codes, electronic controls, and electrical theory

• Experience with line setups, inspections, and electrical testing equipment

• Strong math skills (fractions, percentages)

Nice to Haves:

• Experience with PLCs and drives (Allen Bradley, Siemens)

• Familiarity with AC/DC motors, HVAC, and hydraulic/pneumatic systems

• Experience with welding/torch equipment and precision measuring tools

• Excellent communication and teamwork skills

• Problem-solving mindset and eagerness to keep learning

Physical Requirements:

• Frequent standing and walking

• Occasional sitting, reaching, forceful motion, and lifting up to 60 lbs

• Minimal climbing and lifting over 100 lbs

• Ability to meet physical demands with or without reasonable accommodation

Ready to put your mechanical and electrical expertise to work? Apply today and grow your career with Charter Wire.

We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

Industrial Engineer (Entry Level)

Location: Conroe, TX

Company: National Wire LLC

Position Summary

National Wire LLC is seeking a highly motivated Industrial Engineer (Entry Level) to help build, standardize, and improve our manufacturing processes. This role is designed for someone who wants to be on the production floor — where the work happens — not behind a desk.

You will work directly with supervisors, operators, maintenance, and leadership to implement Lean tools, improve flow, reduce waste, and strengthen operational discipline. This is a high-impact role with strong visibility to senior leadership.

Industrial Engineering or Chemical Engineering background preferred.

Key Responsibilities

• Spend the majority of time on the production floor analyzing processes

• Conduct time studies and develop standard work

• Identify waste and implement Lean tools (5S, Kaizen, Visual Management, Standard Work, Value Stream Mapping)

• Support layout improvements and workflow optimization

• Assist in improving material flow and inventory accuracy

• Develop KPIs for production efficiency and labor productivity

• Work with supervisors to improve process adherence and accountability

• Support root cause analysis for quality and downtime issues

• Help document and standardize procedures

• Participate in continuous improvement projects

Qualifications

• Bachelor’s degree in Industrial Engineering or Chemical Engineering (preferred)

• 0–3 years of experience (internships in manufacturing are a plus)

• Strong analytical and problem-solving skills

• Comfortable working in a fast-paced industrial environment

• Strong communication skills

• Self-driven and willing to challenge the status quo

• Proficient in Excel; ERP exposure is a plus

What We Are Looking For

• Someone who prefers steel-toe boots over a cubicle

• Curious and hands-on

• Comfortable challenging operators and supervisors respectfully

• Driven to improve processes, not just analyze them

• High ownership mentality

⸻

Why This Role Matters

This position will directly impact productivity, cost per ton, waste reduction, and operational discipline across the plant. The right candidate will help shape how we operate as we scale.

Sleep Number is a sleep wellness technology leader. For nearly four decades, we have placed sleep at the center of wellbeing, improving over 15 million lives with our Sleep Number smart beds. We are guided by our purpose to improve the health and wellbeing of society through higher quality sleep. This is exemplified through our 4,000+ mission-driven team members who passionately innovate to drive value creation through our vertically integrated business model, owning the process from start to finish, including selling in our over 650 stores nationwide.

Our team members are encouraged to bring their whole selves to work, sharing their unique perspectives, backgrounds and skills with Sleep Number every day. Whether you are entering, returning or experienced in the workforce, we have a place for you. We hope you join us in creating the future through higher quality sleep.

We are building a pipeline of talented individuals for our Retail Sales Team at Sleep Number to support our future workforce needs. Our Sales Professionals are passionate about our products, have a knack in connecting with customers, and have an entrepreneurial sales driving spirit. If you consider yourself self-motivated, a knowledge seeker, and thrive in a team-oriented environment, we encourage you to apply!

While we may not have an immediate opening, by applying, your application will be reviewed and we'll reach out to you as future roles open that are aligned with your skills and interests. Please refrain from reaching out to our stores directly.

• Deliver a world-class customer experience by identifying unique sleep needs and guiding customers to Sleep Number products.
• Leverage an entrepreneurial spirit to grow sales through Sleep Number's proven sales process, engage in proactive customer outreach, follow up on warm leads, and execute outbound sales initiatives via phone, text, and email communications.
• You can expect career growth opportunities through on-the-job training and development programs.

• Exceptional presentation and interpersonal skills; ability to connect with diverse customers in a consultative environment.
• Demonstrated ability to work independently with minimal supervision while effectively collaborating with a team to achieve shared goals and deliver results.
• Ability to work a schedule reflecting the needs and patterns of store hours, including evenings and weekends (Friday-Sunday).
• Minimum of a H.S. diploma or equivalent required.

• Guaranteed base pay, plus uncapped commissions, and monthly bonus incentives, driven by a pay-for-performance compensation plan that rewards your success through unlimited earning potential.
• Gift of Sleep: receive a FREE Sleep Number bed

This posting is open to our store locations in:

• California: Thousand Oaks, Canoga Park, Santa Monica, Oxnard, Santa Clara, Fremont, Gilroy, Daly City, Valencia, Monterey, San Jose, San Luis Obispo, Studio City
• Hawaii: Kapolei, Kahului

Hourly Pay Range: $16.75 -$19.00

Wellbeing is more than a catchphrase - it's a movement that permeates our company and through our team members. We are dedicated to enhancing and supporting the wellbeing of our team members and their families through benefits, programs, and resources across our five wellbeing pillars of emotional, financial, career, community, and physical health, with sleep at the center.

By joining our team, in addition to offering competitive pay programs, we are proud to offer eligible team members an extensive benefits package including, but not limited to medical and pharmacy benefits, dental, life and disability insurance, a 401(k) Plan, paid time off, and much more.

Safety is a top priority for Sleep Number supporting customers and team members wellbeing. We are committed to maintaining a safe and healthy work environment for all team members that are consistent with CDC guidelines, U.S. Department of Labor's Occupational Safety and Health Administration (OSHA), and state/local laws.

Sleep Number is an equal opportunity employer. We are committed to recruiting, hiring and promoting qualified people and prohibit discrimination based on race, color, marital status, religion, sex (including gender, gender identity, gender expression, transgender status, pregnancy, childbirth, and medical conditions related to pregnancy or childbirth), sexual orientation, age, national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state, or local law.

It is Sleep Number's policy to provide reasonable accommodations to qualified individuals with disabilities during the application process, consistent with applicable law. We may require supporting medical or religious documentation where applicable and permissible by law. If you are a qualified individual, you may request a reasonable accommodation at any time during the selection process, including if you are unable or otherwise limited in your ability to access open roles here.

Organized Power In Numbers (OPIN) works at the intersection of worker power and modern digital and data-driven organizing to help our movements reach millions of people, invite them into movement, and level up campaigns that win for workers, their families, and their communities. We utilize online and offline base building and organizing strategies, comprehensive campaigns, strategic litigation and communications, and policy advocacy to win concrete demands that improve the conditions of workers’ lives and promote civic engagement at the local, state, and national levels. In addition to running our own campaigns, we act as a public utility to power the campaigns and outreach efforts of others, supporting partners with lead generation, campaign strategy, and the implementation of outreach and organizing.

OPIN is a national organization and travel is required for all employees including for remote and regional positions.

Our ideal Staff Attorney is a goal-driven, detail-oriented, problem solver who is committed to working collaboratively and respectfully with organizers and members to develop shared strategies that support worker power. They will ideally have experience representing low-wage immigrants in detention and deportation defense, and a willingness to learn new areas of law to support campaign and policy work. They will also be based in the Sunbelt, or willing to relocate, and demonstrate an ability to achieve results in a fast-paced and dynamic environment while balancing short- and long-term organizational and legal priorities. 

Title: Staff Attorney

Reports to: Legal Director

Key Relationships: Executive Director, Campaign Director, Campaign Managers, Field Organizers

Location: Hybrid Remote, based in a Sunbelt State, strong preference for candidates based in New Mexico, Arizona, Texas, or North Carolina

Compensation: $75,000-$80,000 annually, depending on experience

Essential Responsibilities

• Represent a small volume of non-US citizens in deportation defense, or affirmative applications for immigration relief (case selection driven by organizing and campaign priorities) 
• Provide remote and in-person immigration consultations and screenings to immigrant workers, tenants, and community members 
• Assist with the organization and coordination of both in-person and remote legal clinics, including family preparedness clinics 
• Develop and conduct know-your-rights trainings for immigrants, tenants, workers, and small business owners 
• Conduct legal and policy research to support strategic campaign development
• Serve as policy expert in support of organizing and advocacy to advance immigrant, worker, and tenant rights at the local, state, and federal level
• Researching and staying abreast of developments in both employment/labor and immigration law
• Represent workers and worker organizations in administrative complaints before federal labor agencies
• Conduct legal and factual research to develop litigation and work with local and regional partners to develop strategic litigation as the need arises 
• Draft Freedom of Information and Public Records Act requests and litigate inadequate responses
• Provide technical assistance to community groups, organizers, and advocates
• Develop and grow a network of government, private and legal aid legal resources to support workers throughout the Sunbelt, including: a) private attorneys,; b) pro bono attorneys; c) legal aid attorneys; and d) law school clinics
• Maintain and strengthen collaborative working relationships with national, regional, and local advocacy organizations
• Assist with mentorship of staff (depending on experience level), general administrative tasks, and grant reporting as appropriate

 Required Qualifications and Skills

• J.D.  
• Fluency in Spanish 
• Admission to a state bar, preferable in New Mexico, Arizona, Texas, or North Carolina 
• Experience representing individuals in removal proceedings and providing immigration consultations and case analysis to low income immigrants 
• Strong research, writing, and oral communication skills
• Ability to work independently and with a team
• Strong commitment to racial, social, economic, and gender justice and ability to work with people from diverse backgrounds and cultures.
• A Cover Letter is required for this position

This position is represented by Workers United and is covered under the terms and conditions of the applicable collective bargaining agreement.

Equal Opportunity Employer

OPIN recruits, hires, trains, transfers, and promotes qualified candidates on the basis of individual merit and without regard to race, color, religion, sex, pregnancy, sexual orientation, gender expression or identity, national or ethnic origin, age, disability, veteran status or any other basis prohibited by law.

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces