Ignition Wire Numbers Jobs in Usa

• Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
• Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
• Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
• Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
• Fill holes, and increase the size of metal parts.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Hammer out bulges or bends in metal work pieces.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
• Set up and use ladders and scaffolding as necessary to complete work.
• Use fire suppression methods in industrial emergencies.
• Detect faulty operation of equipment or defective materials and notify supervisors;
• Direct helpers or apprentices in appropriate tasks;
• Must maintain strict adherence to safety rules and quality;
• Participate in site housekeeping;
• Interact with co-workers in an attentive courteous manner;
• Additional duties as directed by management.
  

• Ability to work independently or as part of a team;
• Experience: 5 years of Field Experience, trade school or apprenticeship;
• Knowledge of materials, methods and tools involved in industrial construction;
• Attention to detail;
• Ability to keep hand and arm steady;
• Be highly focused on customer satisfaction expectations;
• Good documentation and record keeping;
• Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
• Competency in Permit Required Confined Space;
• Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
• Appropriate state certification or license;
• OSHA 10 certification.
  

• Industrial manufacturing facilities Power generating facilities
• Chemical manufacturing Healthcare & Institutional
• Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
  

• 
  
• Initiates design documents for small projects and in support of large programs
  
• Develops design documents narratives
  
• Performs requirements analysis
  
• Develops Sequence of Operations / System Functional Documentation
  
• Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
  
• Develops Specifications
  
• Performs QA/QC and technical reviews of designs
  
• Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
  
• Comment Resolution
  

Mechanical-focused controls engineer (BAS/BMS)

• 
  
• Experience on EPMS monitoring
  
• Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
  
• Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
  
• Familiarity with Cisco network switch programming and design preferred
  

• 
  
• Lead programming / configuration team efforts for complex automation and SCADA applications.
  
• Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
  
• Testing / Troubleshooting / Deployment / Commissioning
  
• Author testing / commissioning procedures
  
• Preparation of test reports
  
• Originates test procedures
  
• Commissioning of deployed systems
  
• Development of test equipment and simulation devices
  
• Perform Factory and Field Testing
  

• 
  
• Perform troubleshooting on service calls to existing and legacy system operators
  
• Perform hardware / software upgrades and replacements on existing systems
  

• 
  
• Conducts any surveys, inspections, tours, etc. of client sites, as required
  
• Prepares cost estimates and supporting documents for small projects
  
• Perform hardware / software upgrades and replacements on existing systems
  
• Evaluation and pricing of change orders
  

• 
  
• Assigns technical tasks and coordinates with entry-level engineers
  
• Assigns tasks and coordinates with Technical Staff
  

• 
  
• Experience in reading electrical and control schematics and plans
  
• Experience in control system startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and machinist hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• 3-7 years' experience
  
• Bachelor's degree in engineering or higher
  
• Associate degree (add 3 years)
  
• High school diploma (add 5 years)
  
• Must be a US Citizen
  

• 
  
• Experience in computer networks
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software
  
• Standard Office Software (Microsoft Word, Excel, etc.)
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  

• 
  
• Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
  
• Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
  
• Design Build Institute of America (DBIA)
  
• Engineer in Training (EIT) in relevant in field
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Generate design documents for SCADA/Automation projects
    
    • 
      
    • Develop design document narratives
      
    • Perform requirements analysis
      
    • Generate Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical engineering and 5-7 years field experience
  
• Associate degree in the electrical field and 10 years field experience
  
• High school diploma and 15 years field experience
  
• 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• Must be a US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field TestingMaintenance
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
  
• Experience in reading mechanical and control schematics
  
• Experience in building automation systems (BAS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with test equipment and test equipment software
  
• Experience with networking design, configuration, and troubleshooting
  
• Experience with air handlers, chiller plant systems and data center CRAC units
  
• Ability to travel up to 80%
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

COMPANY OVERVIEW

JTI is a growing, progressive, and team-oriented company rooted in family values. We know that our employees are our number one asset. We not only encourage, but foster an environment that promotes professional growth, internal promotions, continuing education, and a safe work environment.

We are proud to employ a team of dedicated professionals with expertise in electrical construction, mechanical fabrication and installation, engineering, and controls and automation fields who are leaders in their disciplines. We strive to be an excellent strategic partner for clients, providing solutions and adding value to their businesses.

POSITION OVERVIEW

The Journeyman Electrician is responsible for the installation, maintenance, and repair of electrical systems in residential, commercial, and industrial environments. This role requires a deep understanding of electrical systems, blueprints, safety codes, and regulatory compliance. The ideal candidate will possess strong troubleshooting skills, attention to detail, and the ability to work independently or as part of a team.

PRIMARY RESPONSIBILITIES

• Perform site survey activities with a team and independently
• Perform routine maintenance on electrical wiring and systems
• Review job installation plan with the Crew Lead
• Assist in tracking inventory for each project
• Troubleshoot, test, repair and service technical equipment
• Troubleshoot motor and control systems
• Install and repair electrical equipment and fixtures
• Install various types of raceway and cable tray systems
• Adhere to all quality and safety codes
• Clean up the job site

QUALIFICATIONS

EDUCATION and/or EXPERIENCE:

• Journeyman/Journeywoman Electrician License
• Minimum 5 years of electrical experience
• Proficient knowledge of installation of PVC coated rigid conduit systems
• Able to lead a crew of various sizes ranging from 2 – 5 people
• Strong problem solving and critical thinking skills
• Must be able to pass a pre-employment drug screen
• Familiarity with electrical equipment and hand tools
• Familiarity with electrical schematics, blueprints, and manuals

EQUIPMENT & APPLICATIONS /WORKING CONDITIONS & PHYSICAL DEMANDS:

• Lifting and Carrying – Frequently lifting and carrying tools, materials, and equipment, often weighing up to 25-50 lbs.
• Climbing and Balancing – Using ladders, scaffolding, and lifts to reach high areas for wiring and fixture installations.
• Crouching and Kneeling – Working in tight spaces like crawlspaces, attics, and vaults.
• Standing for Long Periods – Spending hours on their feet while wiring or troubleshooting.
• Repetitive Movements – Engaging in repeated motions such as twisting, bending at the waist, kneeling, stripping wires, twisting connections, and using hand tools continuously
• Working in Uncomfortable Positions – Holding tools or equipment overhead, reaching into confined areas, or maintaining awkward postures.
• Exposure to Weather – Working outdoors in extreme heat, cold, rain, or wind
• Hand and Finger Dexterity – Grasping objects with the use of fingers, palm and wrists to hold/and or manipulate objects (hammers, saws, pencils, pens, etc.)
• Pulling and Pushing – Pulling wires through conduits or pushing heavy equipment into place.
• Carrying Personal Protective Equipment (PPE) – Wearing and carrying safety gear like hard hats, gloves, harnesses, and boots.

MINIMUM EQUIPMENT REQUIREMENTS (General Overview)

Hand Toolso

• Needle-nose pliers
• Side-cutting pliers (Lineman's pliers)
• Diagonal-cutting pliers
• Tongue-and-groove pliers (Channellock’s)
• Wire strippers

Screwdriverso

• Flathead screwdrivers (various sizes)
• Phillips head screwdrivers (various sizes)
• Insulated screwdriver set

Wrenches

• Adjustable wrenches (various sizes)
• Combination wrench set
• Allen wrench set (Hex keys)

Saws and Cutting Tools

• Hacksaw
• Drywall saw
• Utility knife

Measuring and Marking Tools

• Tape measure
• Level (torpedo level)

Conduit Tools

• Conduit reamer

Miscellaneous Tools

• Hammer
• Fish tape
• Torpedo level
• Multimeter or voltage tester
• Flashlight or headlamp
• Tool pouch – Belt – or backpack for Tool mobilization

Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment.

Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!

Job Location: Dallas, TX

Signing Bonus Details:

• Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days)
• Qualified Techs with +5 years of relevant boiler experience will receive a $5000 signing bonus! ($3000 paid upon hire, $2000 paid after 90 days)

Essential functions:

• Wire all controls and motors for watertube and firetube boilers and auxiliary equipment.
• Rebuild control valves and regulators.
• Build and test control panel using Engineering wiring schematic and layout.
• Build and test fuel skids using Engineering wiring schematic and layout.
• Build and test condensate tanks and deaerators.
• Trim out firetube and watertube boilers.
• Perform start-up of Rental boilers in field.
• Assist departments as required.
• Reads blueprints and wiring schematics.
• Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers.
• Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler.
• Able to fire and set combustion on boiler with all types of pneumatic controls.
• Able to fire and set combustion on boiler with all types of electrical controls.
• Able to train other employee’s on the operation and controls of boilers.
• Maintain condition of and inventory of all tools and monitors.
• Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results.
• Ensure duties and company projects are accomplished in an efficient and cost effective manner.
• Support peers and management with internal and external projects.
• Adhere to company policies.
• Other duties as assigned.

Basic Requirements:

Education:

• High School diploma or equivalent

Experience:

• Minimum of two (2) years of electrical troubleshooting/ technical background.

Other Requirements:

• Must possess a valid drivers license with a safe driving record
• Must be able to read and work from blueprints and schematics.
• Must be able to follow written and verbal instructions.
• Mechanical and electrical background a must.
• Must have the ability and knowledge to trouble shoot systems without the appropriate schematic.

Physical Skill & Effort:

Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing.

Working Conditions and Hazards:

Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions.

Benefits of being a Cleaver-Brooks Sales & Service Employee:

• Competitive salary
• Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability
• Cash matching 401(k) plan
• Employee assistance program (EAP)
• Pet insurance
• Employee discount program
• Tuition assistance
• Paid time off and 11 paid holidays

Who is Cleaver-Brooks Sales & Service:

Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace.

We are a 24/7 customer driven operation.

This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

By applying to this job and providing your mobile number, you are agreeing to receive an initial text from Cleaver-Brooks, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models)

• Determine if system should be shut down or work must be performed with power source on

• Lock out, tag out, try out equipment and related systems

• Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers

• Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay

• Troubleshoot electric motors using appropriate test equipment

• Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system

• Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel

• Service and maintain electrical systems on various types of overhead cranes

• Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models)

• Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs

• Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance

• Install, replace and repair fiber optic cable for computers and computing systems

• Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets

• Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit)

• Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas

• Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems

• Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters)

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 3+ years of experience as an Electrician or Apprentice.

• 1+ years of experience maintaining industrial equipment.

• Experience working from heights and using fall protection equipment with weight limitations .

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

• Must be able to complete fall protection training.

Preferred Qualifications:

• Electrician license (EL01 &/or EL 07) or an electrical card.

• Crane related experience.

• Experience with prime power.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $33.32 per hour – $61.01 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.

• Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.

• Conduct continuity checks to ensure proper functionality of electrical systems.

• Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.

• Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.

• Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.

• Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.

• Perform hand forming of electrical wiring and soldering as required to complete work assignments.

• Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.

• Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in electrical assembly installation.

• 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).

• 1+ years of experience handling chemicals and/or hazardous materials.

• Ability to recognize colors.

• Ability to work in confined spaces.

• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 09, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.