How To Install Cable Deck Railing Jobs in Usa

Job Summary

Reporting to the Installation Manager the HVAC/R Installation Technician is responsible for install ventilation, air conditioning, refrigeration systems and equipment; inspect and perform tests on systems and equipment at start-up to assure proper functioning. This position has constant contact with the Project Managers and Sales Engineers to receive installation detail and communicate project requirements and results. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills.

Responsibilities

Customer Service

• Always present a professional positive and helpful attitude when interacting with customers and co-workers.
• Exhibit an understanding of Human Relations and functions as a “team player”.
• Observe additional maintenance needs requiring attention and report to the appropriate people.

Work Condition and Paperwork

• Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required.
• Obtain, record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies.

Essential Functions

• This is a physically demanding job involving heavy physical labor, often in adverse conditions and uncomfortable positions.
• Loads van with equipment and tools and drives van to and from job sites.
• Moves equipment (such as furnaces, compressors, blowers, heat pumps, heat exchangers, duct work, pipes and cables, controls, etc.), supplies and tools (hand and power) to designated areas of job sites.
• Perform associated plumbing and electrical work including making terminal connections.
• Must be able to perform all job activities at heights, working off ladders, scaffolds, roofs, platforms, etc.

Job Qualifications

• Must have valid Michigan drivers’ licenses, good driving record (our insurance must accept you)
• High school diploma or GED preferred
• Read and write English
• Write legibly
• Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax)
• Paperwork filled out properly daily.
• Follow verbal and written instructions.
• Follow all safety rules and procedures.
• Be able to wear all P.P.D’s when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.)
• Must be able to wear respirator.
• Lift, climb, bend, and kneel to complete assigned tasks.
• Tolerate working at heights off a ladder or scaffold, on roofs, aerial lifts, etc.
• Perform heavy physical labor during adverse weather conditions.
• Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.D’s.
• Maintain cooperative and effective working relationship with others.
• Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends and holidays)
• 4 hours safety training required annually
• Must have refrigerant transition and recovery certification card (levels 2-3)
• Continuing education is expected.

Physical Requirements

• Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance
• Climbing (ladders, stairs, etc) (frequently with tools or equipment in hand)
• Bending, stooping, twisting, and squatting
• Extended periods of walking
• Regular exposure to weather conditions
• Operating a motor vehicle, Hi-low, forklifts, etc.
• Owning and operating power or hand tools-from floor to above head (drilling often over your head and/or awkward positions)
• Exposure to potentially harmful chemicals or materials with proper P.P.D’s

Non-essential duties and responsibilities

• Performs other duties as assigned by management

• 
  
• The employee is regularly required to sit.
  
• The employee is occasionally required to walk and stand.
  
• The employee frequently is required to use hands to reach, handle or feel objects.
  
• The employee is regularly required to talk and hear.
  
• The employee must regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds.
  
• Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to focus.
  

• The employee may occasionally work near moving mechanical parts. The noise level in the work environment is usually at moderate levels.

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

The Rail Laborer supports Heavy/Civil Construction projects with a focus on rail operations by performing tasks such as site preparation, material handling, and equipment operation. Emphasizing safety, teamwork, and quality, this role ensures efficient and effective contributions to rail-related construction activities in diverse outdoor environments.

Responsibilities:

• Comply with (and actively promote) all Safety policies and procedures including reporting all accidents, incidents and near misses to ensure adherence to our Number One Core Value – Safety, first in everything we do.
• Must understand and comply with all Company safety policies and procedures.
• Clean or prepare construction sites to eliminate possible hazards.
• Excavate by hand ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
• Position, join, align, or seal structural components, such as concrete wall sections or pipes.
• Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
• Position or dismantle forms for pouring concrete, using saws, hammers, etc.
• Complete equipment reports on rack truck, compressors.
• Must have knowledge and understanding of the procedures to use the tools and equipment safely and properly.
• Organize and maintain tool trailers in a neat and orderly fashion.

Qualifications:

• Must have 2-5 years of Heavy/Civil Construction experience.
• Rail experience preferred.
• Must be able to follow verbal instructions.
• Maintain good health status and flexibility to bend, push, pull, stoop and/or twist.
• Must be able to perform strenuous work in varying weather conditions.

Necessary Attributes:

• Must possess the ability to adapt to different personalities and management styles.
• Team player and with strong interpersonal and verbal skills.
• Reliance on experience and judgment to plan and accomplish goals.
• Dedicated and hard working.
• Strong commitment to success of all.
• Possess a strong work ethic.
• Demonstrate the upmost professionalism in how you represent yourself.
• Show quality in everything you do.
• Lead with integrity while producing high quality work.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.

Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Component Engineer 4.

Job Description:

Job Title: Component Engineer 4

Job Type: Contract

Job Location: Sunnyvale, CA

Work Schedule: On-site

Pay Rate: $94 Based on experience.

DESCRIPTION:

Primary Function of the Position:

• Responsible for ensuring suppliers meet ISI requirements for quality, service, delivery, and cost. Drive suppliers to continuously improve business and manufacturing processes specifically related to wire harness and cable assembly.
• Evaluate and select suppliers within copper cables/harness industry. Guide Engineering in choosing suppliers for new products and providing DFM input to new designs. Supports both NPI and on-going production, monitors and works with suppliers to improve supplier performance. Executes detailed projects with suppliers to implement changes and improvements affecting quality, cost, capacity, risk, and sub-supplier management.

Essential Job Duties:

• Work with NPD to procure custom cables ensuring DFM to achieve quality and cost targets
• Support NPD with proto builds and track material readiness at Supplier Drive supplier root cause analysis for cable harness failures
• Mitigate risks and ensure supply continuity by evaluating capacity, lead times and quality issues
• Develop and maintain harness standards, specifications, and design guidelines.
• Work with Strategic Sourcing to evaluate new suppliers and new supplier manufacturing sites
• Complete project/ part qualification deliverables including Supplier pFMEA, Process Validations (IQ/OQ/PQ), Inspection Reports, Gage R&R, and Process Capability AnalysisWork with suppliers to execute cost reductions, capacity improvements, and risk mitigation.
• Select the right process and supplier for the part, considering long-term fit and total cost of ownership.
• Manage supplier changes including manufacturing process changes, production optimization, facility changes, new equipment qualification, and new line validations.
• Drive changes to ISI requirements as necessary by initiating and managing changes to specifications and drawings through the engineering change order process.
• Own and drive to closure supplier variances from symptom through root cause analysis to corrective action, including careful CAPA documentation.
• Effectively prioritize and advance multiple concurrent projects and tasks Clearly communicate project status to key stakeholders Build, own, and relentlessly pursue a vision for developing suppliers.
• Understand proper level of documentation detail for tracking of actions and justification of decisions.
• Generate key metrics for the team and suppliers and continually drive for timely achievement of those metrics.
• Drive suppliers to continually improve their business and manufacturing process performance to meet requirements for supplier excellence using a collection of best practices in project management, Six Sigma, Lean, SPC and negotiation. Lead these efforts without managerial guidance at several suppliers simultaneously.
• Implement corrective and preventive actions for supplier process by driving supplier’s investigations and root cause analysis.
• Provide effective and timely supply base information and recommendation to management by creating and delivering data-driven supply base information to any level of management at ISI with little or no guidance.
• Prepare and deliver supplier communications as required by independently working with suppliers on scorecard creation.
• Work with suppliers and ISI engineering for the new product introduction to: Create product supplier landscapes to determine launch readiness and report to management.
• Develop supplier ramp readiness plans by judging business risk based on forecast, supplier capacity, quality performance, and process capability.
• DFM by engaging suppliers early in development cycle to feedback manufacturability improvements in the designs prior to production.
• Influence and guide Engineering in choosing suppliers by determining selection criteria for preferred suppliers and leading the team effort to evaluate preferred suppliers.
• Review, analyze and close customer complaints, manufacturing variance requests, and first article inspections by judging risk analyses and justifications.

Required Skills and Experience

• Minimum 7 years related experience with an BS Engineering degree or 5 years’ experience with MS in Engineering.
• Excellent written and verbal communication skills including presentations to executive level management.
• Excellent Interpersonal skills and team building skills.
• A proven history of implementing Lean/6 Sigma/SPC Programs at suppliers.
• Excellent Project Management skills.
• Excellent analytical and problem-solving skills along with good judgment.
• Demonstrable knowledge in evaluating and challenging supplier technical, quality, and business capabilities.
• Demonstrable knowledge of a wide range of manufacturing processes including understanding of key input variables for quality, cost, and capacity (Specialization can be in cable assembly, wire cutting, termination, crimping, Soldering, overmold)

Working Conditions

• Ability to travel to suppliers on an as-needed basis – domestic and international.

Preferred Skills and Experience

• 4-7 years of engineering experience in cable assembly, wire harness production, or electromechanical manufacturing.
• The ideal Candidate possesses broad and deep hands-on cable assembly experience along with wire cutting, stripping, crimping, soldering,

About Maxonic:

Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients.

Interested in Applying?

Please apply with your most current resume. Feel free to contact Manish Rajput ( /(4 for more details.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible.

Parsons is looking for a Change Manager to join our team! In this role, you'll have the privilege of working on the premier Infrastructure project in the country, as well as receive all of the benefits of working for Parsons! This Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark NJ and NYC.

The Gateway Program is the most urgent infrastructure program in the country a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project.

As a tri-venture partner with Parsons, Arcadis, and Mace (MPA) is the Delivery Partners (DP) to provide advice, leadership, and support to GDC for the development and implementation of HTP. This is a master service with task order contracts for a 15-year contract encompassing a broad range of strategic advisory services, project management, design management, construction management, stakeholder coordination, federal compliance, operations support, office administration, and related services.

What You'll Be Doing:

• Lead and coordinate change management activities across all HTP Packages and Project Contracts, ensuring alignment with the HTP Project Management Plan (PMP) and GDC procedures.
• Evaluate proposed changes to scope, schedule, and cost from GDC, SEPs, and Project Contractors, providing technical assessments and recommendations.
• Manage the Notice of Proposed Changes (NPC) Log and ensure timely updates and documentation of all change activities.
• Collaborate with the GDC Program Office and SEP teams to develop negotiation strategies and coordinate responses to claims and change requests.
• Review and support the approval process for Contractor-Initiated Change Order Requests (CICs), ensuring compliance with project objectives and contractual obligations.
• Maintain version control and historical records of all approved changes, ensuring transparency and traceability.
• Provide input into change-related reporting and dashboards, supporting program-level oversight and decision-making.
• Support continuous improvement of change control processes and tools, contributing to the refinement of workflows and documentation standards.

What Required Skills You'll Bring:

• Bachelor's Degree and 10+ years of related experience.
• Proven experience in change management within large-scale infrastructure or transportation programs.
• Strong understanding of project controls, contract administration, and technical review processes.
• Excellent analytical, negotiation, and communication skills.
• Familiarity with PMIS platforms and document control systems.
• Ability to manage multiple stakeholders and coordinate across teams.
• Bachelor's degree in Engineering, Construction Management, or a related field preferred.
• Equivalent professional experience may be considered.
• Requires a comprehensive knowledge of industry business practices and the negotiation of prime contracts.
• Incumbent must also possess strong written and oral communication skills, excellent interpersonal skills, and a working knowledge of PC software packages typically associated with contract administration.
• Proven ability to perform in a management capacity is also required.

What Desired Skills You'll Bring:

• Experience working with or for a large agency such as MTA, NYDOT, etc.
• Experience working on Mega-Project in the Rail and Transit industry.

Salary Range: $120,800.00 - $217,400.00

We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle!

Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.

We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons questAPPLY TODAY!

• 
  
• Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
  
• Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
  
• Conducts a variety of tests using established methods.
  
• Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
  
• Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
  
• Other duties may be assigned to include overtime work to complete production requirements.
  

• 
  
• High School diploma and 4 years prior related experience.
  
• Demonstrated ability to read and interpret cable assembly drawings.
  
• Demonstrated ability to read and execute hydrostatic pressure tank procedures.
  
• Ability to obtain L3Harris certification to operate forklifts.
  
• Must be able to lift up to 35 pounds independently.
  
• Must be able to traverse ladders.
  

JOB DESCRIPTION

We are seeking an experienced Cable & Harness Technician II and III to support aerospace manufacturing in Gilbert, AZ. This is a hands‑on, on‑site role focused on building complex space‑flight cable and wire harness assemblies in a high‑reliability environment.

What You’ll Do

• Build and assemble complex cable and wire harnesses from schematics, wiring diagrams, and wire lists
• Perform connectorization, point‑to‑point wiring, and heavy soldering of large wire bundles
• Work in an ESD/FOD‑controlled manufacturing environment
• Lay out and build harnesses using harness boards
• Mix and apply bonding, potting, and encapsulation materials
• Use soldering irons, heat guns, tweezers, and hand tools
• Maintain clean, organized workstations and follow aerospace workmanship standards

REQUIRED SKILLS AND EXPERIENCE

• High School Diploma or GED
• 2-6 years electrical assembly and wiring experience
• Experience with the following: (will help them get cert but must have knowledge)
• IPC 620 or IPC WHMA‑A‑620
• J‑STD
• Experience reading drawings and wiring diagrams

Parsons is looking for an amazingly talented Project Controls Manager to join our team! In this role you will have the privilege of working on the premier Infrastructure project in the Country, as well as receive all of the benefits of working for Parsons! This Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City.

The Gateway Program is the most urgent infrastructure program in the country a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project.

As a tri-venture partner with Parsons, Arcadis, and Mace (MPA) is the Delivery Partners (DP) to provide advice, leadership, and support to GDC for the development and implementation of HTP. This is a master service with task order contracts for a 15-year contract encompassing a broad range of strategic advisory services, project management, design management, construction management, stakeholder coordination, federal compliance, operations support, office administration, and related services.

POSITION OVERVIEW: Develops, manages, and/or executes all phases of the project controls effort (mainly cost management and reporting). Typically manages large-sized projects. The incumbent utilizes widely diversified knowledge of project controls activities, and draws upon extensive experience and exposure to various types of projects and clients.

SPECIFIC RESPONSIBILITIES:

• Lead the cost management and reporting functions on a large construction development program.
• Provides guidance, direction, and specialized assistance to project for the resolution of difficult and complex project control problems.
• Interfaces with clients, attends regular meetings, and provides statistical reports.
• Manages a team of Project Control Engineers/Specialists who are qualified to analyze, evaluate, and forecast project costs, as well as performance against an established schedule with critical milestones.
• Assesses the impact(s) of design/construction changes and schedule slippages.
• Oversees the development and maintenance of an established reporting system to show the hierarchy of cost plans and schedules; keeps project and company management fully informed.
• Recommends and oversees the customization of project control reporting systems and reports to meet specific project requirements.
• Creates statistical / cost reports for management on a recurring or ad hoc basis.
• May be required to make informal or formal presentations.
• Performs other responsibilities associated with this position as may be appropriate.

EDUCATION/EXPERIENCE:

• Bachelor's degree in Engineering or Construction Management (or related field)
• 15-20+ years of related experience, including supervisory/managerial experience.
• Strong cost management and reporting background is required.

SKILLS/COMPETENCIES:

• Requires basic engineering knowledge in electrical, mechanical, civil, or a related fields.
• Proficient PC skills including a proficiency in various Project Controls Software and Microsoft Office Suite.
• Proven ability to perform in a supervisory capacity.
• Thorough knowledge of industry practices is required.

Security Clearance Requirement: None

This position is part of our Corporate team. For over 80 years, Parsons Corporation, has shaped the future of the defense, intelligence, and critical infrastructure markets. Our employees work in a close-knit team environment to find new, innovative ways to deliver smart solutions that are used and valued by customers around the world. By combining unique technologies with deep domain expertise across cybersecurity, missile defense, space, connected infrastructure, transportation, smart cities, and more, we're providing tomorrow's solutions today.

Salary Range: $128,700.00 - $231,700.00

We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle!

Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.

We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons questAPPLY TODAY!

Title: Equipment Installation Mechanical Technician IV - 3 Openings

Location: Newton, NC

Duration: 12 Months

Hours: Monday - Friday 8 AM - 5 PM, Occasional OT

Travel Requirements: Project locations will range from Newton, NC and Hickory, NC

Only W2 candidates are eligible for this position. Third-party or C2C candidates will not be considered.

Scope of Position:

The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations. This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements. The Lead Technician serves as a subject matter expert and mentor to junior technicians.

• This position is in the Engineering Project and is focused on capacity additions and the associated line installations & debug from a mechanical perspective.

• Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.

• As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.

• Leverage knowledge of mechanical and electrical engineering, machining & designing processes to improve performance of equipment/manufacturing process.

• Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations

• Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.

• Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals

•Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.

•Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.

•Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.

•Verify installations meet OEM specifications, safety codes, and quality standards.

Leadership & Coordination

• Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.

• Assign tasks, monitor progress, and ensure efficient use of labor and resources.

• Mentor and train junior technicians, providing hands-on guidance and technical instruction.

• Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.

Quality & Documentation

• Conduct inspections and quality checks throughout the installation process.

• Complete installation reports, checklists, punch lists, and as-built documentation.

• Support equipment testing, startup, and customer acceptance activities.

Project Support

• Assist with installation planning, sequencing, and scheduling.

• Coordinate material handling, tools, and equipment needed for installations.

• Support continuous improvement initiatives and best practices in installation methods.

Day-to-Day Responsibilities:

• Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.

• Manage and lead installation and debugging activities to meet milestone & timeline objectives for successful capacity adds.

• Design & implement mechanical solutions and process changes to improve capability of manufacturing equipment.

• Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts

• Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.

• Develop and update engineering and operations documentation.

• Support training for the operations workforce regarding equipment or operations changes

• Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).

• Align, test, and calibrate mechanical systems after installation.

• Diagnose complex mechanical failures and recommend effective solutions.

• Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.

• Identify opportunities to improve equipment reliability, efficiency, and safety.

• Collaborate with other departments to implement process improvements.

Qualifications

Required Education:

• Associate's degree

• A high school degree will be considered with significant hands-on experience

Required Years and Area of Experience:

• 3+ years' experience in new equipment installations in a manufacturing environment, start-up experiences a plus

• Experience in a fast-paced, changing environment with multiple priorities

• Strong knowledge of mechanical systems, industrial equipment, and installation techniques.

• Proven ability to read and interpret engineering drawings and technical documentation.

• Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.

Required Skills:

• Ability to learn new technology and processes quickly

• Strong technical fundamentals with mechanical engineering skills

• Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.

• Proficient with PC software, including Microsoft Office Suite

• Strong communication skills

• Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.

• Ability to read and interpret technical drawings, blueprints, and schematics.

• Proficiency in using hand tools, power tools, and diagnostic equipment.

• Strong problem-solving, analytical, and critical-thinking skills.

• Knowledge of safety regulations and practices in an industrial setting.

• Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).

Certifications:

• Mechatronics trades highly desired

• Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.

• OSHA or other safety certifications may be required.

Desired Skills:

• Hands-on experience in commercial manufacturing equipment

• Project leadership/management experience (including milestone management and financial ownership)

• Experience in vendor/supplier management on-site/off-site

• Experience with CAD

• SAP, Maximo, Maintenance Leadership

• Detail-oriented and able to perform with limited supervision.

Soft Skills:

• Leadership experience in technical project management

• Ability to work & effectively collaborate within a team

• Ability to allocate/supervise resources to accomplish aggressive project milestones & timeline within specification and costs.

• Able to shift tasks quickly

• Able to prioritize and multitask

• Communicate effectively both verbal and written

Hours of work/work schedule/flex-time:

• 40 hrs. (overtime expected). Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.