High5 Zero Electrolyte Tablets Jobs in Usa

About the Company

At SFI Health, we believe we have the responsibility to bring proven natural health solutions to people’s healthcare needs. We are a global natural health company committed to sourcing and producing natural medicines to the highest standards. Backed by evidence of effectiveness, quality and safety, our products are marketed around the world using our international community of leading life sciences companies and distributor networks. To find out more, please visit the Role

Essential job functions:

Leadership/Team Management

• Working to establish and maintain company goals, budgets, strategies, vision, culture, and direction
• Working with cross functional teams to provide input on sourcing, quality control testing, regulatory and production teams by clearly communicating product capabilities, constraints and design trade offs.
• Providing feedback on new product concepts and feasibility of manufacturing
• Responsible for direct reports training and development
• Coaching product development team to achieve high performance
• Development and maintenance of departmental performance measurements

Product Development and Formulation Management

• Develop formulations for a variety of oral, solid dosage delivery forms (i.e., capsules, tablets, powders)
• Work with Purchasing/supply chain to source raw materials that meet quality and regulatory requirements
• Work with Purchasing and Regulatory to qualify vendors and raw materials
• Perform process improvements and analyze formulas for reformation
• Coordinate and execute bench work, pilot production, and manufacturing scale up
• Create and maintain formulation parameters for qualified raw materials (bulk density, moisture, particle sizes, etc.)
• Provide guidance to development team and project management to achieve launch timelines
• Assist team members in troubleshooting manufacturing issues tied to formulation
• Provide technical assistance towards analytical and microbiological test methods and testing plans

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Education:

• Advanced Degree preferred in Pharmacy, Chemistry, Food Science, Chemical Engineering or other related science background

Experience:

• Experience with Quality Management Systems, SAP software, and project management software desired
• 10+ years industry formulation development
• 10+ years managing staff or teams or,
• Combination of education and experience
• Working knowledge of solid dose form equipment such as tablet presses, tablet coating encapsulation machines, and granulation processes
• Comprehensive knowledge and practical experience with product/process development, processing laboratory techniques and regulatory requirements

Skills & abilities:

• Strong organizational skills and the ability to work in a team environment
• Proven leadership and multi-tasking skills
• Demonstrated ability (and passion) to thrive in an often chaotic and rapidly changing environment.
• Creative problem solving and negating skills
• Excellent verbal communication skills with the ability to translate complex product attributes, limitations and value propositions into clear customer focused explanations.

Technical/Functional Skills

• Demonstrates excellent communication skills, both written and verbal, and communicates clearly in all situations
• Translates organizational goals and objective into actionable plans
• Prioritizes work to meet multiple deliverables and deadlines
• Assesses and drives improvement in employee performance by providing clear, attainable goals, actionable coaching feedback and maintaining clear, detailed, written documentation
• Identifies performance and career development needs in team members and works with the employee to prepare an effective development plan
• Serves as an effective subject matter expert to cross-functional teams
• Thinks strategically to find and implement new and better solutions

Computer skills:

• Microsoft Office suite
• Database management

Supervisory Responsibilities:

This position supervises the following positions:

• Document Specialist – PD
• R&D Analyst (2)
• Manager, Product Development

At GE Appliances, a Haier company, we come together to make \"good things, for life.\" As the fastest-growing appliance company in the U.S., we're powered by creators, thinkers and makers who believe that anything is possible and that there's always a better way. We believe in the power of our people and in giving them the freedom to explore, discover and build good things, together.

The GE Appliances philosophy, backed by three simple commitments defines the way we work, invent, create, do business, and serve our communities: _we come together_ , _we always look for a better way_ , and _we create possibilities_ .

Interested in joining us on our journey?

A Senior Materials Representative - Cycle Counting is an integral part of the Materials Operations team and overall inventory process. The Senior Material Representative will support assigned buildings inventory and cycle count as well as consolidating parts, maintaining processes and reporting results. This position is located in Louisville, KY.

**Position**

Senior Materials Representative

**Location**

USA, Louisville, KY

**How You'll Create Possibilities**

**Essential Duties & Responsibilities:**

Inventory

+ Prepare and organize area for inventory cycle counts, ensure consolidate parts, ensure FIFO inventory rotation, check receipts and scrap

+ Cycle count parts as assigned to include off site warehouses and inventory on yard

+ Assist in identification and reconciliation of all inventory and cycle count variances using problem solving skills

+ Conduct yard checks, as needed to ensure record accuracy of trailers on premises as reflected in Trackx

+ Assist in developing, auditing and managing SOP's for successful and accurate inventory transactions and movements

+ Participates and is key contributor in annual physical inventory

+ Participate on AWO's and embrace lean manufacturing concepts in efforts to continuously improve materials work streams

Tracking & Stakeholder Alignment

+ Interact with materials departments to improve cycle count program

+ Report counts and maintain accurate records

+ Communicate effectively to key stakeholder's issues that arise resulting in disruptions due to inventory availability

+ Support other cycle counting initiatives as they occur

**What You'll Bring to Our Team**

Minimum Qualifications:

+ Associate's degree or equivalent, or _actively_ pursuing in business or related field

+ Ability to communicate effectively, take initiative, be organized, & problem solve

+ Duties and hours may change based on the need of the business

+ Experience using Oracle, Trackx, Microsoft Office (Excel, Outlook, Word, etc.)

Preferred Qualifications:

+ Bachelor's degree in business or related field

+ Working experience in inventory control type function

+ Knowledge of parts identification, part processes and procedures

+ Ability to become ERP Superuser

+ Attention to detail with analytical and organizational skills

**Our Culture**

Our work is centered on our People and Culture as reflected in our Zero Distance philosophy and we recognize the importance of reaffirming our commitment to inclusion and diversity (I&D). This underscores our commitment to fostering an environment where every individual feels valued, connected, and empowered to contribute, while positioning our organization to adapt seamlessly to the evolving needs of our workforce and communities.

This reflects our dedication to creating solutions that: Empower colleagues by fostering an environment where all voices are heard, valued, and encouraged to contribute. Strengthen communities where we live and work. Reinforce a culture of belonging, purpose, and engagement. Reflect the diversity of the communities we serve through our workforce, products, and practices.

By further embedding Zero Distance into our People and Culture framework, we will continue to build a deeply connected organization. We are cultivating a culture of engagement, belonging, and connection, because while attracting new talent remains a priority, retention is a cornerstone of our strategy.

GE Appliances is a trust-based organization. It is important we offer our employees the flexibility they need to do their best work while balancing the needs of the business and individuals. When you join GE Appliances, you will have the opportunity to work with your leader to create a flexible work arrangement that balances the needs of the individual, team, and organization.

GE Appliances is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Appliances participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S

_If you are an individual with a disability and need assistance or an accommodation to use our website or to apply, please send an e-mail_ _to

• 
  
• Adhere to Terex safety policies and procedures
  
• Have ability to operate various types of welding machines on various materials: Short arc, stick, FCAW on X1050, T-1, etc
  
• Operate stationary and/or portable grinders and pneumatic chipping hammers to remove excess metal, oxidation and foreign matter from weldments and structures
  
• Operate material handling equipment to move parts and materials, as needed
  
• Read and interpret blueprints. Capable of working from drawings, sketches, templates, temporary stop gauging devices and patterns, as well as set up jigs and fixtures. Access computer terminals
  
• Comply with TEREX Utilities quality standards through error prevention and by meeting such requirements with zero defects
  
• Follow and promote The Terex Way Values
  
• Compliance with all applicable occupational health and safety required
  
• Perform other functions as needed
  

• 
  
• High school diploma and/or equivalent experience
  
• 0-2 years of manufacturing experience
  
• Able to lift up to 40 lbs. and 40-100 lbs. with assistance of others or lifting equipment provided
  

• 
  
• Possess good mechanical aptitude
  
• Capable of using most hand tools
  
• Understand and follow verbal and written instructions
  
• Recognize potential safety hazards and take appropriate actions to minimize risks
  
• Ability to read and understand blueprints, order acknowledgement, engineering drawings and written instruction
  
• Function as a team member and contribute to group goals while maintaining a positive attitude
  
• Ability to safely and efficiently operate welding equipment, forklifts and overhead cranes
  
• Atmospheric exposure to dust, and vapors
  
• Certain personal protective equipment is required
  

• 
  
• We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose
  
• Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm.
  
• Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued.
  
• We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way.
  
• We are committed to helping team members reach their full potential.
  
• Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations.
  
• For more information on why Terex is a great place to work click on the link! Careers | Terex Corporate
  

The Spartanburg operation is a state-of-the-art coffee roasting and pod packaging facility in addition to hosting a full beverage distribution center. Spartanburg is the largest KDRP manufacturing and distribution location. The site will operate on the foundational principles of TPM (Total Productive Maintenance); leverage the principles of Lean manufacturing and harness the power of Highly Effective Teams. All associates at the Spartanburg site will have accountability to both a functional business unit in addition to the full site operation. The site will run on first-in-class enterprise IT and manufacturing execution systems with highly automated processing, packaging, and material movement equipment.

As a Production Supervisoryou will be expected to lead and inspire teams of highly skilled, highly engaged employees and support a "team of teams" and mini-Business Unit approach that will enable our employees to achieve extraordinary results. You will provide oversight and guidance to a team of approximately 15 operations associates and work collaboratively across all functions to streamline the efficiency of production, optimize cost per unit, and deliver world class safety, quality, and delivery performance. Working within a highly automated TPM-based environment, crew leaders will enable disciplined execution of standardized processes through leader standard work and layered process audits, while teaching and facilitating structured problem-solving techniques and processes to drive waste out of the system and promote a culture of continuous improvement.

Shift & Schedule: This is a full time position available on our N2 shift working 6:30pm to 7:00am, Wednesday, Thursday, Friday, Alt Saturdays. Great work life balance! Flexibility for additional coverage outside of these hours, including potential weekends and/or holidays, is also required as needed.

Responsibilities:

• Deliver best-in-class performance across the balanced scorecard
• Deliver upon the site safety goal of zero injuries by leading, promoting and supporting safety culture through behavioral safety observations, facilitation of safety meetings, completion of regular safety audits and visible leadership moments, enforcement of lock-out/tag-out program, and 100% completion of all safety and regulatory training
• Achieve zero-defect performance and improve the customer experience by leading a right first-time approach to all operations, conducting layered process audits to ensure all quality processes are being followed, and leading root cause corrective action efforts when defects occur
• Work collaboratively with maintenance, quality, material handling and distribution center to reduce unplanned downtime and increase machine availability through the establishment and sustainment of autonomous and preventive/predictive maintenance SOPs and TPM programs
• Lead cross-functional focused improvement initiatives to streamline material flow and improve equipment efficiency to increase capacity and reduce operating expenses
• Facilitate mini-Business Unit Structure (mBU) and support Highly Effective Team model in a TPM-based Environment
• Lead approximately 15 associates through full employee cycle including interviewing, hiring, and training to coaching, performance management, development, and recognition.
• Provide leadership and support to operations teams in support of site operational meeting cadence (production planning, TPM Starpoint, mini-business unit, site leadership, and employee meetings)
• Carries out leadership responsibilities in accordance with the organization's TPM and Highly Effective Team Principles, policies and applicable laws.

Ensure high performance results of your team by:

• Fostering a culture of trust and wellbeing that prioritizes the team and values employee contributions
• Driving a shared vision with clear goals and accountability, supported by regular conversations to maximize talent
• Embracing diverse perspectives to foster innovation, learning from both successes and failures
• Establishing a safe environment where team members are motivated, heard, and aligned with clear expectations

• Salary Range: $70,500 - $100,000
• Actual placement within the compensation range may vary depending on experience, skills, and other factors
• Benefits, subject to election and eligibility: Medical, Dental, Vision, Disability, Paid Time Off (including paid parental leave, vacation, and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement
• Annual bonus based on performance and eligibility
• Benefits eligible Day 1!

• Associates or Bachelor's degree from accredited University in Engineering, Operations Management, Supply Chain, or Business preferred
• 5 years of experience applying hands-on knowledge of concepts, practices and procedures in manufacturing or equivalent environment
• Minimum three years of experience in a leadership role supporting 10+ associates in a Lean environment
• Competency in Microsoft Office Suite and experience with SAP or similar manufacturing data systems
• Ability to spend significant time standing on the manufacturing floor with some frequency of computer work

Keys to success in this role include skills, knowledge and behaviors in the following areas:

• Strong people and process leadership skills
• Confidence, integrity and an autonomous mindset with the ability to work independently and strive to win, even in challenging environments
• Ability to develop effective instructions and calibrate instrumentation
• Team-player attitude with well-developed interpersonal skills and comfort in a cross-functional, multi-cultural environment.
• Mechanical orientation with the ability to solve problems and lead change
• Strong communication and writing skills and ability to conduct root-cause analysis and implement corrections
• Ability to create and execute operational plans to develop team and achieve site results
• Strong time-management skills and ability to handle multiple conflicting priorities
• Experience with lean, kaizen/six sigma events and driving lean transformation with proven results and in a manufacturing environment (5S, autonomous maintenance, planned maintenance, visual management, and leading kaizen events)

Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partners brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it!

Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us?

We strive to be anemployer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work.

Keurig Dr Pepper is an equal opportunity employer and affirmatively seeks diversity in its workforce. Keurig Dr Pepper recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law.

A.I. Disclosure:

KDP uses artificial intelligence toassistwithinitialresume screening and candidate matching. This technology helps us efficientlyidentifycandidates whose qualifications align with our open roles.If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly in lieu of clicking Apply.Please include the job title and location or Job ID # in the email subject line.

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Quality Manager

Position Type: Direct Hire

Position Location: McIntosh, AL

Position Salary: $100,000 - $125,000 (Depending on Experience) + Bonus

Responsibilities:

• Driving a Zero-Defect Culture and leading quality strategy for the Advanced Materials (ADMAT) Division
• Managing laboratory operations (A&QC labs)
• Ensuring compliance with ISO 9001 and AS quality standards
• Leading internal, customer, and 3rd-party audits
• Lead initiatives to ensure zero-defect manufacturing performance.
• Promote and strengthen a continuous improvement culture across the site.
• Build strong customer partnerships and support customer complaint resolution.
• Quality Management System (QMS)
• Maintain and continuously improve the site's Quality Management System.
• Ensure site-wide compliance with ISO 9001 and AS standards.
• Oversee site quality documentation and perform annual management reviews.
• Laboratory & Technical Oversight
• Manage A&QC lab operations and ensure testing accuracy and safety.
• Provide statistical analysis guidance, including SPC/SQC and materials statistical equivalency.
• Support aerospace-related product qualifications.
• Audit & Compliance Leadership
• Lead: Internal audits, customer audits, and third‑party certification audits
• Ensure timely closure of audit findings.
• Quality Issue Resolution
• Investigate internal and external quality incidents, often with incomplete data.
• Drive timely resolution of customer complaints.
• Serve on the Material Review Board (MRB).
• Team Leadership: Manage, develop, and mentor chemists and quality team members.
• Oversee staffing, talent management, and professional development.

Requirements:

• Bachelor’s degree (Chemistry, Engineering, or related field); Higher education is a plus
• 5+ years of relevant experience in a quality management background
• Experience working with a QMS system
• Analytical chemistry
• Laboratory operations
• ISO 9001
• Statistical tools (SPC/SQC)
• Lean or Six Sigma certifications are preferred

Benefits:

• Full Benefits (Medical, Dental, Vision)
• 401K+ Matching
• PTO
• Bonuses

JOB OVERVIEW:

The Validation Scientist position encompasses all areas of Technical Services with primary focus on technology transfer, scale-up, process optimization, process/packaging validation, commercial production technical support as well as equipment qualification and cleaning validation support.

KEY ROLES/RESPONSIBILITIES:

• Lead and execute projects such as technology transfer, scale-up, process optimization process/packaging validation as well as equipment qualification and cleaning validation support to meet critical project deadlines.
• Provide technical support in the investigation of manufacturing incidents and major deviations. Assure thoroughness of investigation and documentation as well as implementation of preventive/corrective actions as necessary.
• Conduct commercial production technical support activities such as qualification of alternate suppliers of API, excipients and packaging components, equipment change parts, process parameters, yield limits, hold time studies, etc.
• Execute utility and process equipment qualification support activities such as installation, operational and performance qualifications, periodic reviews, investigations, assessments, review change control and non-routine maintenance requests, out of specification calibrations, etc.
• Perform cleaning validation support activities such as execution of cleaning validation and verification studies, hold time studies, investigations, assessments, justifications, maintain cross contamination program, etc.
• Develop and/or execute experimental designs and approaches to resolve technical problems and utilize engineering standards, principles, concepts, equations as well as statistical techniques.
• Prepare and review documents to support projects, such as laboratory notebooks, protocols, reports, assessments, justifications, investigation reports, regulatory submissions, master batch records, change control, etc.
• Complete and document physical sampling and testing such as loss on drying, particle size distribution, bulk density, viscosity, pH, tablet weight, thickness, hardness and friability; sample for analytical and microbiological testing.
• Author and periodically update assigned Standard Operating Procedures (SOPs) for the department.
• Represent Technical Services at project team meetings and provide sound technical advice.
• Coordinate and interface with Operations, Facility Engineering, Quality Control, Quality Assurance and Regulatory Affairs groups to assure successful project execution.
• Directly interact with Piramal Pharma Solutions clients.
• Maintain regulatory compliance within the function and follow site safety, health, and environmental policies and procedures.

EXPERIENCE:

• Minimum of a Bachelor's degree in a scientific discipline (e.g., Chemical Engineering, Pharmaceutics, Pharmacy, Chemistry or equivalent) with a minimum of 3 years experience in Technical Services, Process Engineering, Process Validation, Formulation or related field in the pharmaceutical industry.
• Experience in laboratory and production scale manufacture of solid oral, liquid and semi-solid dosage forms using equipment such as comminuting mills, high-shear granulators, fluid bed dryers, blenders, tablet presses, tablet film coaters, encapsulates, low and high-shear mixing vessels, homogenizers, pumps, packaging, etc.
• Working knowledge of cGMP (Current Good Manufacturing Practices) regulations, SUPAC guidance, and general compliance expectations.
• Working knowledge of investigational techniques, including but not limited to root cause analysis, risk assessment impact evaluation, and technical report writing.
• Must possess research and problem solving abilities and be capable of producing detailed documentation, understand and make generalized and specific conclusions from project data.
• Technical writing experience is required with attention to detail skills essential.
• Must be able to work in a team environment with effective project planning/management, analytical thinking, organization, and execution skills.
• Must have proficiency in the Microsoft Office Suite programs.
• Demonstrated professionalism and excellent communication skills with internal and external personnel are essential.
• Ability to work effectively managing multi projects at a fast pace withcross-functional departments and manage priorities to meet timelines.
• Must be innovative, proactive, resourceful and committed to continuous improvement.
• Working knowledge of cGMP data management systems (EDMS, Trackwise, and/or SAP) is preferred.

WORK ENVIRONMENT:

The position requires the ability to work in ahigh demand office and manufacturing setting with time spent performing "on the floor" activities in laboratory and manufacturing areas. The position may require extended hours including evenings and weekends as well as work hours on 2nd and 3rd shifts depending on project needs.

Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA

Title: Machine Learning Engineer

Location: San Jose, CA

Responsibilities:

• Productize and optimize models from Research into reliable, performant, and cost-efficient services with clear SLOs (latency, availability, cost).
• Scale training across nodes/GPUs (DDP/FSDP/ZeRO, pipeline/tensor parallelism) and own throughput/time-to-train using profiling and optimization.
• Implement model-efficiency techniques (quantization, distillation, pruning, KV-cache, Flash Attention) for training and inference without materially degrading quality.
• Build and maintain model-serving systems (vLLM/Triton/TGI/ONNX/TensorRT/AITemplate) with batching, streaming, caching, and memory management.
• Integrate with vector/feature stores and data pipelines (FAISS/Milvus/Pinecone/pgvector; Parquet/Delta) as needed for production.
• Define and track performance and cost KPIs; run continuous improvement loops and capacity planning.
• Partner with ML Ops on CI/CD, telemetry/observability, model registries; partner with Scientists on reproducible handoffs and evaluations.

Educational Qualifications:

• Bachelors in computer science, Electrical/Computer Engineering, or a related field required; Master’s preferred (or equivalent industry experience).
• Strong systems/ML engineering with exposure to distributed training and inference optimization.

Industry Experience:

• 3–5 years in ML/AI engineering roles owning training and/or serving in production at scale.
• Demonstrated success delivering high-throughput, low-latency ML services with reliability and cost improvements.
• Experience collaborating across Research, Platform/Infra, Data, and Product functions.

Technical Skills:

• Familiarity with deep learning frameworks: PyTorch (primary), TensorFlow.
• Exposure to large model training techniques (DDP, FSDP, ZeRO, pipeline/tensor parallelism); distributed training experience a plus
• Optimization: experience profiling and optimizing code execution and model inference: (PTQ/QAT/AWQ/GPTQ), pruning, distillation, KV-cache optimization, Flash Attention
• Scalable serving: autoscaling, load balancing, streaming, batching, caching; collaboration with platform engineers.
• Data & storage: SQL/NoSQL, vector stores (FAISS/Milvus/Pinecone/pgvector), Parquet/Delta, object stores.
• Write performant, maintainable code
• Understanding of the full ML lifecycle: data collection, model training, deployment, inference, optimization, and evaluation.

Machine Learning Engineer | Python | Pytorch | Distributed Training | Optimisation | GPU | Hybrid, San Jose, CA

Sr Electrical Superintendent (Data Center Construction)

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

The Sr Electrical Superintendent leads field execution of the electrical scope on mission-critical data center projects. This role owns day-to-day onsite leadership for electrical activities: safety, subcontractor coordination, installation quality, schedule adherence, energization readiness, testing/commissioning support, and turnover.

This is a hands-on, high-accountability role for a leader who can drive production, coordinate seamlessly with CSA and mechanical teams, and maintain clean-build discipline in critical environments.

Typical Project Types

• Ground-up hyperscale and enterprise data center builds
• Brownfield upgrades and retrofits in operating facilities
• Campus expansions and critical infrastructure additions
• Large fit-outs and accelerated customer deployment work

Key Responsibilities

Safety & Field Leadership (Primary)

• Lead electrical field operations while reinforcing a zero-incident culture.
• Ensure subcontractors comply with site safety plans, permits, JSAs/AHAs, and housekeeping standards.
• Enforce electrical safe work practices (LOTO coordination, energized work controls as applicable, tool/equipment compliance).

Electrical Scope Execution (Primary)

Lead and coordinate installation for electrical systems, including (project-dependent):

• Medium voltage distribution (as applicable), transformers, switchgear/switchboards, panelboards
• UPS systems, PDUs/RPPs, STS/ATS, distribution gear
• Generators and paralleling/synchronization (where applicable)
• Busway, cable tray, conduit, feeders/branch, terminations, grounding/bonding
• Lighting, controls power, fire alarm interface coordination (as required)
• BAS/BMS power and controls integration support (in coordination with controls vendors)
• Equipment access, service clearances, and maintainability requirements

Planning, Sequencing & Schedule Control (Primary)

• Own electrical short-interval planning (daily/weekly) and support pull planning with measurable commitments.
• Coordinate overhead, gear setting, busway routing, and feeder pulls with CSA progress, mechanical routing, and access constraints.
• Identify constraints early (design gaps, material delays, access conflicts) and drive resolution to maintain schedule.
• Track manpower, productivity, and area readiness; communicate impacts and recovery plans.

Quality Control & Clean Build Discipline (Primary)

• Enforce installation standards, tolerances, manufacturer requirements, and inspection readiness.
• Drive quality walks and manage deficiency/punch lists to closure.
• Maintain critical-space discipline: cleanliness, protection of installed gear, and strict housekeeping expectations.
• Ensure labeling, tagging, and documentation support turnover and commissioning.

Energization, Testing & Commissioning Readiness (Primary/Supporting)

• Support safe, coordinated energization planning (sequence, notifications, LOTO boundaries, readiness checks).
• Coordinate with CxA, vendors, and test agencies to ensure readiness for: megger/hi-pot (as applicable), functional testing, IR scans, startup support, and integrated systems testing.
• Drive prefunctional completion by system/area to support startup, commissioning, and operations turnover.

Procurement & Long-Lead Tracking (Supporting)

• Track procurement status for electrical long-lead items (switchgear, UPS, generators, busway, breakers, specialty cable).
• Coordinate deliveries, laydown, rigging plans, and installation readiness with the project team and vendors.

Turnover & Closeout (Primary)

• Ensure electrical closeout packages are complete and accurate: as-builts, O&Ms, test reports, warranty documentation, training coordination, spare parts, punch closure.
• Coordinate turnover requirements with PM/QAQC/commissioning teams and support phased turnover.

Knowledge, Skills & Abilities

• Strong electrical construction background with superintendent-level leadership experience.
• Mission-critical/data center experience strongly preferred; other high-spec industrial work considered.
• Deep understanding of electrical means and methods, sequencing, and constructability.
• Ability to read drawings/specs and enforce quality with subcontractors.
• Familiarity with commissioning flow (prefunctional → functional → integrated testing) and vendor coordination.
• Strong communication and conflict resolution skills; calm under pressure.
• Comfortable with field technology (Procore/ACC, Bluebeam, MS Office) and daily reporting.
• Understanding of CPM schedule logic and short-interval planning.

Experience & Education (Typical)

• 7+ years in commercial/industrial electrical construction, including lead superintendent/foreman responsibility.
• Data center / mission-critical experience preferred.
• OSHA 30 preferred (or willingness to obtain).

Become Part of Our Team

As an industry leader Balfour Beatty offers employees a comprehensive benefits package with competitive salaries and more including:

• Medical, Dental, Vision and Life Insurance
• Health Savings Account
• 401(k) with company match
• Flexible Spending Accounts (Dependent & Medical Reimbursement)
• Vacation Time
• Sick Time
• Holidays
• Paid Personal Days
• Paid Volunteer time
• Tuition Assistance
• Employee Referral Bonus

Summary

We are seeking a Superintendent to join our Project Team during 2nd shift (2p-12a) on a large Federal Project that includes new construction and renovation, with full tenant interiors buildout, and high level of finishes. The Superintendent is responsible for all field operations, including the coordination of subcontractors’ work. Responsible for all field activities associated with the project, including ultimate responsibility for implementation of Safety/Zero Harm program for the job site, supervision of all field construction work by subcontractors and self-performed work. Shares responsibility with the project manager for developing the project budget, actively participating in the preconstruction phase, and ensuring that the project is built on time, within budget, and according to company policies and procedures. Manages and mentors assistant superintendents and other field personnel.

2nd shift (2p-12a)

Essential Functions

• Project Financial Responsibilities
• Preconstruction Services
• Project Scheduling (prefer P6 experience)
• Site Logistics Planning
• Project Administration, Operations, and Close-out
• Promote Customer Relations
• Promote Culture, Leadership and Employee Development

Minimum Requirements

• Applicable college degree and similar experience on large projects.
• Willing and able to work 2nd shift (2p-12a)
• Ten years or more of commercial construction field experience.
• Five years of direct supervisory experience related to staff and subcontractor management.
• Proficiency using a personal computer (PC) and company communication tools, such as email, the internet, and Microsoft products (e.g., Word, Excel, Office, Outlook).
• Ability to read plans and specs.
• Scheduling experience software application (prefer P6 experience).
• Ability to plan and maintain site logistics plans.
• Previous or current experience working in a commercial construction Superintendent role.

Preferred Experience

• DSA or OSHPD experience.
• Commercial construction general contractor backgrounds.

Salary: 100, ,000.00 USD / YEAR

*This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, any collective bargaining agreements, and business or organizational needs. No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, incentive, or any other form of compensation that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law and any applicable plan documents.

About us

Balfour Beatty US is an industry-leading provider of general contracting, at-risk construction management and design-build services for public and private sector clients across the nation. Performing heavy civil and vertical construction, our teams build the unique structures and infrastructure that play an important role in how people live, work, learn and play in our communities. Our teammates have an instinctive passion for innovating that is fueled by a relentless curiosity, a drive to employ lean practices and processes and the determination to find a better way. Through Zero Harm®, we are challenging the construction industry’s assumptions about safety. We believe that no level of harm should come to anyone as a result of our business.

Consistently ranked among the nation’s largest building contractors by Engineering News-Record, our US business is a subsidiary of London-based Balfour Beatty plc (LSE: BBY).

Balfour Beatty is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state or local law.