High5 Test Reddit Jobs in Usa

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

The R&D Test Engineer is responsible for being the lead in development of test methodology and test plan development supporting the verification and validation testing for medical devices, including improvements. This position will also support the authoring and execution of test protocols. This position is an individual contributor role.

Job Responsibilities and Essential Duties:

• 
  
• Translate Design Requirements into Design Verification and Validation (V&V) Testing
  
• Own Test Method Validation (TMV) for novel testing approaches
  
• Design test setup and methodology for product testing
  
• Own novel complex protocol development
  
• Lead test failure investigations and document deviations
  
• Chair cross-functional reviews for protocols, test reports, and deviations
  
• Research different test methods and standards
  
• Advise and support improvements to verification and validation SOPs and tools
  
• Write work instructions, protocols, reports
  
• Perform other product development and laboratory tasks on an as-needed basis
  

Required Knowledge, Skills and Abilities:

• 
  
• Meet the qualifications of the job through education, training, or prior experience
  
• Experience with current industry practices for performing and documenting verification
  
• Ability to communicate within the discipline and with others who are perhaps not as technically trained
  
• Ability to work collaboratively with others and share deliverable responsibilities among the team
  
• Work in an organized, methodical manner
  
• Excellent written and oral communication skills
  
• Adequate computer skills (Microsoft Office Suite)
  
• Able to take precise measurements
  
• Able to solve problems
  
• Able to troubleshoot
  
• Able to analyze & interpret data
  

Minimum Requirements:

• 
  
• Bachelor's degree in R&D or Engineering preferred
  
• 3-5 years' experience in R&D or related field
  

Quality Requirements:

Build Quality into all aspects of their work by maintaining compliance with all quality requirements.

• 
  
• Ensure compliance with all FDA and Worldwide Quality & Compliance regulations (As applicable to the job function).
  
• Must have the education and experience to understand and comply with U.S. and Worldwide medical device regulations (As applicable to your job function).
  
• Attend all required Quality & Compliance training at the specified interval.
  
• Adopt the "Beyond Compliance Quality Culture" in the work environment; always meet and exceed requirements.
  

Environmental/Safety/Physical Work Conditions:

• 
  
• Use of computer and telephone equipment and other related office accessories/devices to complete assignments
  
• Able to lift to 15 lbs.
  
• Ability and willingness to travel to outside test labs to execute/support any offsite lab testing activities
  
• Wear face masks and PPE wherever required.
  
• Integrate environmental considerations into all aspects of work and maintaining compliance to all environmental, health, and safety requirements
  
• Ensure review of all processes and activities for potential environmental improvements and implement necessary changes as applicable to the job function.
  
• Must have general understanding, at a minimum, of Getinge Environmental Policy.
  
• Consider environmental legislation and regulations as a minimum requirement
  
• May require sitting or standing for long periods of time depending on the project.
  

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

$90,000-$105,000/annually + 4% STIP

#LI-LG1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  
• Parental and Caregiver Leave
  
• Tuition Reimbursement
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

Flight Software links together the mechanical, avionics, algorithmic, and embedded worlds to actually make the airplane fly. As a Flight Software Test V&V Engineer, you will develop the test cases to support the test verification processes ensuring that the aviation products we develop are safe to fly and help provide a high-fidelity training environment for our flight-test crews.

Responsibilities

As a Flight Software Test V&V Engineer on the Simulation and Test Systems team, you will be instrumental in testing and deploying autonomous aircraft software. The Simulation and Test Systems team architects, builds, and maintains the hardware and software infrastructure necessary to verify aircraft performance prior to flight testing. Your responsibilities include verifying flight software functionality across diverse integrated test environments, such as software-in-the-loop (SIL), hardware-in-the-loop (HITL), and on-aircraft testing. You will also author and execute test procedures for on-ground aircraft testing.

A key part of this role involves designing, building, and maintaining automated test scripts within our test ecosystem. These scripts will support functional testing and requirements-driven software tests necessary for FAA certification.

This is a highly collaborative, hands-on position. You will coordinate with engineering teams throughout the company to develop test plans, execute tests, investigate issues, and drive problems to closure. You will also be responsible for the maintenance, installation, and troubleshooting of test and simulation equipment.

Basic Success Criteria

• 3+ years professional experience testing software

• 3+ years professional experience Python and exposure to C++ build systems

• 3+ years of experience testing integrated hardware / software products or mission-critical systems

• Experience authoring problem reports, test reproducibility steps, and procedures for internal team collaboration

• Hands on experience using laboratory electrical test equipment such as digital multimeters, oscilloscopes, and/or logic analyzers

• Demonstrated experience with root cause investigations

• Bachelor's degree in Computer Science, Computer Engineering, or equivalent experience

Preferred Criteria

• Experience working with robotics or other safety critical software

• Previous experience developing automated test cases through GitHub Actions, Jenkins, Travis CI, or other continuous integration infrastructure

• Demonstrated ability to author and exercise complex test procedures a hardware-in-the-loop (HITL) test environments

• Excellent documentation and collaboration skills

• Experience with DO-178C formal software test requirements

The position will be located at our facility in Mountain View, California. Must be willing to travel up to 10% of the time.

The estimated salary range for this position is $155,000 to $215,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $155K - $215K

Job Title: R&D Test Engineer

Location: Irvine, CA

Employment Type: Full-Time

Position Overview

We are seeking R&D Test Engineers to support the development and verification of innovative drug delivery and medical device products. The selected candidates will contribute to verification and validation activities, test method development, and product testing to ensure compliance with regulatory and internal quality standards.

This role involves working closely with cross-functional teams including R&D, Quality, Manufacturing, and Regulatory Affairs to support product development, verification strategies, and root cause investigations.

Key Responsibilities

• Assist in the development and testing of innovative drug delivery products.
• Define and execute verification strategies, including development of verification plans, protocols, records, and reports.
• Develop scientifically justified sample size strategies in compliance with internal and regulatory requirements.
• Design and execute engineering and verification test procedures.
• Prepare test protocols and documentation, maintain accurate laboratory notebooks, and present results to cross-functional teams.
• Analyze test data and provide technical insights and recommendations.
• Lead or support root cause investigations and implement issue resolutions.
• Define, develop, and validate test methods for product verification.
• Recommend design, process, or project improvements to enhance product performance and development efficiency.
• Ensure compliance with company policies, regulatory standards, and safety procedures.
• Review and evaluate design changes for technical and regulatory compliance.
• Conduct tests to determine physical and mechanical characteristics of materials for quality control, process control, and product development.
• Perform technical tasks according to quality and functional standards.

Required Qualifications

R&D Test Engineer

• Experience in R&D testing, product development, or verification within engineering environments.
• Strong experience in verification planning, protocol development, and testing execution.
• Demonstrated ability to lead root cause investigations and technical problem-solving.
• Experience working in regulated industries (medical devices preferred).
• Strong technical documentation and cross-functional communication skills.
• experience in engineering testing, product development, or laboratory environments.
• Basic knowledge of engineering test methods and verification processes.
• Ability to perform testing, data analysis, and documentation under supervision.
• Strong analytical and problem-solving skills.

Preferred Skills & Tools

Experience with the following tools and technologies is preferred:

Testing & Lab Equipment

• Zwick or Instron testing systems
• Flow measurement equipment
• Viscometers
• Climate chambers
• 3D printing technologies

Engineering & Data Tools

• SolidWorks
• Minitab
• Electronic Lab Notebook (ELN)

Project & Requirements Management

• Microsoft Project
• Laboratory Information Management Systems (LIMS) such as LinkUS
• Requirements and Risk Management tools such as DOORS or Cockpit

Job Title: SDET / QA Automation Engineer

Location: Mount Laurel- NJ

Duration: Long Term

Job Description:

Job Summary:

We are seeking a highly skilled and experienced SDET / QA Automation Engineer with 8 to 10 years of expertise in Python, JavaScript, and modern automation frameworks. This position involves developing automation solutions, microservices, and test scripts while validating end‑to‑end network components and their behavior. The candidate should have strong domain knowledge in networking and cable technologies, with the ability to collaborate effectively with clients and cross‑functional teams.

Key Responsibilities:

• Develop microservices using Python, NodeJS, and Golang as part of automation and service validations.
• Develop standalone Python/NodeJS scripts to simulate network traffic and validate performance across different endpoints.
• Create Proof of Concepts (POCs) based on client needs and actively participate in client demos and technical discussions.
• Lead the creation of test strategies and manage test environments with both physical and virtual device setups.
• Create comprehensive test scenarios and automated test scripts using MochaJS, ensuring robust coverage of functional, integration, and regression test cases.
• Design reusable test components, validate API and microservice behavior, and integrate MochaJS test suites into the existing automation framework to enhance reliability and execution efficiency.
• Collaborate with cross‑functional teams to refine requirements, improve test coverage, and ensure smooth integration with CI/CD pipelines.
• Gather requirements and perform detailed analysis for new automation scenarios and test case development.
• Support manual and automation testing across applications, devices, and servers as required.
• Ensure code quality using tools like SonarQube and adhere to strict QA standards.
• Provide technical guidance, troubleshooting support, and mentorship to team members on tasks and issues raised by the client.
• Maintain version control and branching strategies using GitHub, ensuring high code integrity and traceability.
• Monitor automation execution, analyze failures, and drive root‑cause investigations to improve overall product quality.
• Document technical workflows, automation processes, and test scenarios to ensure long-term maintainability and knowledge sharing.

Required Skills & Experience:

• 8-10 years of experience in QA/SDET automation roles.
• Strong programming knowledge with Python and JavaScript.
• Good hands-on experience with Go Lang and NodeJS.
• Hands-on experience with MochaJS for scripting and automated testing.
• Excellent knowledge with web technologies like REST, SOAP, XML and JSON
• Proficiency in API testing using Bruno/ Postman.
• Familiarity with GitHub for version control and Jira for project tracking.
• Excellent domain knowledge in Network and cable domain
• Should be familiar with IMS architecture and SIP protocols.
• Good problem-solving and debugging skills.

Should have good communication and client interaction skills.

Job Title: Electrical Test Engineer - Three Phase and motor

Location: Charlotte, NC

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

Electrical Test Engineer – Commercial Chiller Systems

Location: Charlotte NC

Job Type: Full time

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities :

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications:

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies :

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

Manufacturing Test Software Engineer

Salary: $125,000 – $150,000 + equity & benefits

Location: Mission District, San Francisco, CA

We’re looking for a self-motivated Manufacturing Test Software Engineer to join our R&D/Pilot test team in San Francisco. You’ll work closely with R&D and Operations to improve test systems, processes, and production readiness for LiDAR products.

Key Responsibilities

• Maintain, enhance, and deploy test systems and automation platforms
• Drive improvements in test efficiency, yield, and product quality
• Analyze root causes of failures and implement corrective actions using tools such as 8D, 5 Whys, and Fishbone analysis
• Support scalability and manufacturability projects
• Prepare technical documentation and train test operators

Required Skills & Experience

• Strong Python programming and debugging skills
• Experience with test automation in manufacturing environments
• Familiarity with source control tools (Git, Jira, etc.) and quality standards (SPC, GR&R, control charts)
• Experience with LiDAR, robotics, vision systems (Cognex/OpenCV), or test measurement equipment is a plus
• Bachelor’s degree in Computer Science, Engineering, or equivalent experience
• 10+ years supporting product tests in manufacturing

System Integration Test Lead

Summary:

We are seeking a Technical Program Manager (TPM) with system-level experience to tackle new challenges and leverage your expertise in this dynamic role. This company offers a fast-faced, innovate culture with abundant information, requiring you to quickly process and develop clear plans to resolve issue efficiently.

Be part of a leading consumer technology company and make a significant impact by leading programs and driving manufacturing test readiness!

Responsibilities :

• Oversee the preparation and execution of test readiness activities, including managing the transition from Surface-Mount Technology (SMT) to final assembly across all phases of product New Product Introduction (NPI) development.
• Plan, execute, and complete dry runs to ensure manufacturing test readiness for NPI builds, identifying potential issues before full production.
• Quickly identify, troubleshoot, and resolve any test-related issues that arise during the build process, ensuring minimal disruption and maintaining timelines
• Create and implement strategic plans for addressing problems, ensuring timely and effective solutions.
• Work closely with engineering, manufacturing, and other cross-functional teams to ensure seamless communication and alignment on project goals and deliverables
• Regularly track and report on the status of test progress, readiness, and outcomes, ensuring transparency and accountability throughout the project lifecycle
• Continuously refine and improve test processes and methodologies to enhance quality, efficiency, and product maturity, ensuring compliance with industry standards and best practices
• Ensure product test quality standard and manufacturing criteria are met

Requirements

• Proven experience in program management or test readiness at the system level, with a strong background in hardware and software integration
• Understanding of HW/SW architecture and interoperability of a complex systems
• Strong analytical and problem-solving skills, with the ability to thrive in a fast-paced environment
• Excellent communication and organizational skills, with the ability to articulate complex issues clearly
• Knowledge and experience in New Product Introduction (NPI) for consumer products, enabling efficient issue resolution and build execution
• Experience in consumer product manufacturing tests and hardware/software integration is a plus
• Engineering degree in ME, CE, EE or Physical Sciences prefer

Location: Cupertino, CA (Hybrid, Tuesdays - Thursdays Onsite)

Duration: 12-36+ Months

Pate Rate Range: $70/hr - $80/hr (DOE)

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking to hire Electronic Systems Design, Analysis, and Test Engineers for current and emerging programs across the St. Louis region, including Berkeley, MO, Hazelwood, MO, St. Charles, MO, and Mascoutah, IL.

This position spans the technology development life cycle, including requirements generation, system design and implementation, integration, and test. As a key member of our team, you will have the opportunity to work on cutting-edge projects, collaborate with cross-functional teams, and contribute to the success of our programs.

Who we are:

• We are curious, creative and explore new ideas that move our company and industry forward.
• Invest in and care for our people, and we treat each other with respect even when we disagree. We feel comfortable raising concerns; we ask for help when needed; and we support our teammates because we can only achieve our shared mission by working together.
• Work with integrity and build trust by consistently meeting our commitments and communication transparently with customers, colleagues and stakeholders.
• We take pride in doing hard work and if we make a mistake, we own it, learn from it, and strive to improve.
• How we think and act each day keeps our people and those who rely on us safe. We take responsibility for our mission to design, build and service complex products with precision and sound decision making.

A leading global aerospace company and top U.S. exporter, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. Our U.S. and global workforce and supplier base drive innovation, economic opportunity, sustainability and community impact. Boeing is committed to fostering a culture based on our core values of safety, quality and integrity.

This includes, but is not limited to:

• Air Dominance (AD)
• Phantom Works
• Boeing Global Services (BGS)
• Precision Engagement Systems (PES)
• Boeing Test and Evaluation (BT&E).

Some example products within the portfolios include:

• Fighters (F-15, F/A-18, & F-22)
• F-47
• T-7A Trainers
• MQ-25
• JDAM
• Harpoon

Come join our team and make a career out of making a difference!!

Position Responsibilities:

• Understand and apply job practices, techniques, standards, principles, theories, and concepts
• Develop, document, and maintain electronic and electrical system requirements according to contract requirements and customer feedback
• Develop statement-of-work and technical performance specifications
• Analyze, translate, and implement customer requirements into system architecture, hardware, and software designs and interface specifications, showing traceability throughout the product lifecycle
• Defines test and validation approach to ensure system designs meet operational and functional requirements
• Resolve product integration issues and production anomalies
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements and for potential application to internal business strategies
• Monitor supplier performance to ensure system integrity and compliance with requirements
• Develop and document complex electronic and electrical system requirements
• Design hardware, software, and interface specifications
• Solve problems concerning fielded hardware and software over the entire product lifecycle

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

Potential signing bonus for eligible/qualified external candidates.

Some programs may require domestic and/or international travel.

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.

• A final U.S. Secret or Top-Secret Clearance Post-Start is required.
• Special Program Access or other Government Access Requirements may be required for this position.

Basic Qualifications (Required Skill/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Currently reside in OR willing to relocate to the St. Louis, Missouri region

Preferred Qualifications (Desired Skills/Experience):

• Level 3: 5+ years of related work experience or an equivalent combination of technical education and experience
• Level 4: 9+ years of related work experience or an equivalent combination of technical education and experience
• Experience in the Aerospace Industry
• Experience using good communication, analytical, organizational skills, and demonstrated ability to work in a team environment
• Experience within a design/build or test team
• Experience creating, developing, and/or maintaining engineering processes
• Experience with electronic/electrical system design or test plan development and execution based on requirements
• Strong knowledge of data structures, system design, and architecture

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Level 3: $107,100 - $144,900
Level 4: 129,200 - $174,800

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Applications for this position will be accepted until Mar. 28, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.