Hellofresh Cookbook Pdf Reddit Jobs in Usa

• 
  
• You will be assisting journeyman Riggers in rigging up hoisting and pulling gear for lifting, moving, and positioning heavy loads.
  
• You will be assisting in fabricating, installing, and repairing standing and running rigging, wire and fiber rope items such as slings, towing bridles, nets, and other ship and boat rigging and handling of test weights.
  
• You will be operating an electric, gasoline, or diesel powered fork lift trucks which are capable of lifting loads weighing 10,000 pounds or more.
  
• You will be driving fork lift trucks over rough and sometimes muddy terrain through narrow aisles in outside storage areas.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
  
• You may be required to lift 100 pounds and occasionally carry equipment that weighs up to 60 pounds.
  
• Work may be performed in shops and aboard ships and submarines, which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching, and climbing.
  
• You may be required to climb vertical ladders and occasionally perform work from ladders and platforms.
  

• 
  
• You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.
  
• You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.
  
• You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.
  
• You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.
  
• You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will install and fit parts on ships and locate positions of pieces by reference to water line, center lines, frame lines and other reference points.
  
• You will install packing, gaskets, liners and similar items where necessary.
  
• You will remove and repair or replace damaged parts of doors, hatches, and ship structures
  
• You will lay out shell, deck and bulkhead plates, I-beams, channel bar, angle bar, and other structural shapes, gun rings, struts, framing, and foundation structures and other parts from blueprints and mold loft templates.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will pass on instructions to members of the work group.
  
• You will check and report work progress of the group.
  
• You will perform work site inspections.
  
• You will receive job or work assignments from welding supervisor.
  
• You will check and report work progress of the group including written documentation and shift assist requests.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will provide guidance and direction to Shipfitter shop personnel.
  
• You will provide instruction for nuclear or non-nuclear work of the Structural Group personnel in the skills of the trade.
  
• You will prepare analysis of trade requirements through the use of audits, surveillance, and/or incident reports.
  
• You will provide interpretations and problem resolution for shop employees.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This may be a bargaining unit position.
  
• You may be required to successfully complete a pre-appointment physical examination.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  
• You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
  
• This position may require exposure to high noise levels.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

• 
  
• You will perform reviews of documents associated with completed work and trade processes.
  
• You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
  
• You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
  
• You will serve as an Expert Welder leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination.
  
• This position requires the ability to lift and carry items weighing 50 pounds.
  
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
  
• Must maintain visual inspection qualifications per VT-271.
  

• 
  
• You will inspects completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  
• You will train and mentor less skilled employees. Demonstrate proper work methods and discuss viable alternatives, considerations, etc.
  
• You will perform research to continually improve trade processes and keeps shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.
  
• You will assure safety and housekeeping rules are followed.
  
• You will plan, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul marine components from start to post-work review.
  
• You will pass instructions received from supervisors and provides overview of tasks to be performed to other workers.
  
• You will serve as an Expert Machinist leading a group to ensure work assignments are completed.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to successfully complete a pre-appointment physical examination and complete annual physicals.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• Work is performed in shops and aboard ships and submarines which requires working from uncomfortable and cramped positions which involve stooping, bending, kneeling, reaching and climbing ladders.
  
• This position requires the ability to lift and carry items weighing up to 60 pounds.
  
• This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  
• This position requires rotating shift work.
  
• This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
  
• A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
  

• 
  
• You will lay out shell, deck and bulkhead plates, I-beams, channels, angles, pipe and round bar and various other structural shapes, gun rings, struts, framing and various foundation structures and other parts from blueprints and templates.
  
• You will cut and shape plates, beams and other heavy metal structural shapes, using various shop machinery.
  
• You will use precision tooling such as micrometers, feeler gauges and torque wrenches for meeting required tolerances per technical work documents when required.
  
• You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.
  
• You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
  

• 
  
• Must be a US Citizen.
  
• Must be determined suitable for federal employment.
  
• Must participate in the direct deposit pay program.
  
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
  
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  
• Males born after 12-31-59 must be registered for Selective Service.
  
• This is a bargaining unit position.
  
• You will be required to obtain and maintain a current valid United States driver's license.
  
• You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.
  
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
  
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
  
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  
• You will be required to obtain and maintain a U.S. Passport.
  
• This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
  
• This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.
  
• This position may require rotating shift work.
  
• This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.
  
• This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
  

Business Overview

KINESSO is the technology-driven performance marketing agency that provides actionable growth for both our agency partners and clients. We turn 'action' into 'outcome' for our clients, leveraging our unique capabilities in optimization, analytics, AI, and experimentation. KINESSO has brought together the collective power of what was formerly Matterkind, Reprise, P3, and Kinesso under one collective entity that will serve as the most powerful delivery engine in the industry. We have extensive offerings spanning across performance marketing and data and technology. Fueled by a deep understanding of consumer behavior, we offer an end-to-end engine of planning and optimization while also delivering on data-driven strategy for social platforms, actionable growth in e-commerce, and creating curated marketplaces specific to each client's function and needs. The company has more than 6,000 employees operating in more than 60 countries. Learn more at Overview

As a passionate and driven paid social expert, you thrive in collaborating with an integrated marketing team, transforming senior-level digital strategies into effective daily tactics. In this role, you'll lead Paid Social Associates and Sr. Associates, offering mentorship, training, and ensuring all work meets quality standards. Your responsibilities include managing day-to-day operations, guiding your team to achieve client goals and KPIs, and fostering strong client relationships. You're eager to deliver top tier paid social campaigns for high-profile brands, confidently communicating the impact of tactics and strategies as the primary client contact. You excel in a dynamic environment, where training and coaching team members is key to ensuring flawless execution.

Responsibilities

• 
  
• Responsibilities will be across social media platforms such as Facebook, Instagram, Pinterest, SnapChat, Twitter, LinkedIn, TikTok and Reddit
  
• Responsible for overseeing Paid Social Associates and Sr. Associates on the team and owning their career development
  
• Developing and overseeing optimizing, and maintaining paid social campaigns for clients, including coordination of assets between creative agencies and budget management
  
• Works with a cross-discipline team to integrate paid social media strategy into a multi-channel, holistic recommendation.
  
• Uses strong quantitative skills, including analytical and story-telling ability, to analyze data and provide insights and optimization recommendations. Familiarity with third-party data and measurement solutions. Developing, executing, and testing across campaign variables that create client-specific insight and feed future successions of testing.
  
• Helps creatives express their ideas with feasible recommendations to tie it closer to the brief. Passionate about innovation and the creative process, desires to find creative ways to say "yes" to ideas and to contribute your own.
  
• Understanding client goals and how to maximize those measures of success through tactical strategies and technologies; Maintaining and optimizing client campaigns to improve overall performance against pre-determined benchmarks on an ongoing basis
  
• Brainstorming and researching new first to market ideas including new betas and opportunities with our partners.
  
• Strong familiarity with 3rd-party tracking vendors and integrating with social platforms
  

Required Skills and Experience

• 
  
• Substantial experience in account management, planning, and/or performance media experience
  
• Strong working understanding of the Paid Social platforms, including major players and supporting technology Facebook Ad Manager, X (formerly Twitter) Ads, etc.
  
• Demonstrable experience working with multiple partners, on enterprise level paid social media accounts with diverse budget levels and objectives
  
• Proven ability to understand high-level client goals and how they translate into paid media strategy when applied via online technologies
  
• Ability to effectively communicate processes and tactics to clients, peers, and junior members of the team
  
• Understanding of paid social measurement and experience utilizing multiple native measurement tools
  
• Excellent written and verbal communication skills
  

Desired Skills and Experience

• 
  
• 3+ years of experience
  
• Agency experience strongly preferred
  
• Detail and process oriented, with the ability to multitask and prioritize tasks based on client objectives
  
• Time management skills
  

Wage and Benefits

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family.

The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

Employment Transparency

It is our policy to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position, please .

Social Media Design Specialist

$30.00 - $35.00 Per Hour

One-Year Contract

Compensation Depending on Experience

Columbus, Ohio

What does the position offer:

• One-year contract
• Hybrid schedule
• Equipment for the job needs

Primary Job Function

Dawson has partnered with a Columbus-based corporation to assist in finding a Social Media Design - Content Creator. The role is part of the Strategic Services Team within their creative agency. It is made up of highly skilled and collaborative cross-functional partners that work together to solve complex problems in innovative ways and create experiences that delight.

The Social Media Design - Content Creator will be responsible for planning and producing high-quality content across various social media platforms to drive business objectives and engage our brand’s target audiences. This role involves creating visually appealing and compelling social content in the form of images, videos, reels, infographics, etc. that align with our brand identities and marketing goals.

What you'll be doing:

• Develop and execute creative content strategies for multiple social media platforms (e.g., Instagram, Facebook, TikTok, Reddit, etc).
• Conceptualize, shoot, design, write, and edit engaging social media content with ability to iterate and execute ideas quickly.
• Collaborate with the social media experience team to ensure content aligns with overall marketing strategies and campaigns.
• Monitor social media trends, competitive activities, tools, and applications, and apply best practices to enhance content performance and drive content creation efficiencies.
• Adjust content strategies based on content performance metrics to improve engagement and reach.

Who we're looking for:

• Bachelor's degree in Graphic Design, Marketing, Communications, or a related field.
• Proven experience as a Social Media Content Creator or similar role.
• Strong portfolio showcasing creative and engaging social media content across social platforms.
• Proficiency in social content creation tools and software, such as native in-app creative tools as well as Adobe Creative Suite (Photoshop, Illustrator, InDesign Premiere Pro, Firefly).
• Excellent visual design skills and a keen eye for aesthetics and details relevant in the social space.
• Experience with video production for social media and editing.
• Strong copywriting and storytelling abilities.
• Excellent presentation and interpersonal skills.
• Knowledge of social media platforms, algorithms, and best practices.
• Strong organizational and time-management skills, with the ability to handle multiple projects simultaneously.
• Excellent communication and collaboration skills.
• A proactive and creative mindset with a passion for social media and digital marketing.

Apply Today!

Upload your resume – no cover letter required. Our recruiters will review applications quickly and help connect you to this role and other opportunities.

About Dawson

Dawson is a trusted staffing partner in Central Ohio. We help job seekers grow their careers with fast feedback, personalized support, and access to multiple employers through one application.