Hellermanntyton Tool Bag Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.

As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems. Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems. You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.

• Obtain necessary engineering drawings for assigned jobs if not included with the order.

• Initiate planning or engineering change requests for pre-planned jobs as required.

• Set up assembly tools according to instructions and ensure correct locators for model configurations.

• Hand fit parts using jigs and tools to ensure proper alignment and fit.

• Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.

• Deliver completed details to the appropriate work area for further processing.

• Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.

• Drill and ream holes in parts and assemblies according to drawing specifications.

• Apply sealants, primers, and adhesives as required by work orders and specifications.

• Handle and dispose of hazardous materials safely, following approved procedures.

• Obtain the correct type and size of fasteners from the roto-bin per specifications.

• Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.

• Measure and cut tubing to close tolerances, and swage tubing as necessary.

• Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with powered hand tools

• 1+ years of experience working with precision measuring tools

• Computer proficiency including Microsoft Office Suite

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)

• 1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawings

• Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 30, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.

• Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.

• Scribe tooling locations and reference lines as specified in engineering drawings and specifications.

• Diagnose and correct any detected discrepancies in parts and processes.

• Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).

• Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.

• Operate ground-controlled handling equipment to load, unload, and move parts within the shop.

• Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.

• Locate points and holes from established reference lines or index points using prints, templates, and work orders.

• Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.

• Access workload using online computer systems and assign work based on priority or Team Leader direction.

• Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.

• Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.

• Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.

• Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Basic computer experience and competency.

• Experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training in reading and interpreting drawings or blueprints.

• 2+ years of experience using hand tools and/or hand-held power tool

• Able to close tolerance drill within .003 and able to precision measure between .003.

• Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• 2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.

• Ability to close tolerance.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 23, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 2nd shift (Onsite)

What You Will Do:

Job Description

• Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts.

• Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

Qualifications we prefer:

• 1-3 years of machining experience.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

EV5 Job code: PWH77771 (Production Machinist/Proc C)

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

At Bel, we are not just a company—we are a company on a Mission, built on 160 years of bold innovation, family values, and a commitment to social purpose. With beloved brands like Babybel®, GoGo squeeZ®, The Laughing Cow®, and Boursin®, our snacking solutions bring more than joy; they want to serve as a force for good. Our U.S. Mission? To help close the critical 80% nutrition gap by making it easier for Americans to eat more fruits, veggies, and dairy as part of their daily lives. #IWorkForAllForGood

Job Description Summary

At Bel, the vision for the Strategic Insights department (SI) is to become a competitive advantage for the company, ​running a Best-in-class Insights & Foresights factory, powered by big & smart data analytics.

The Director of Business Analytics North America belongs to the global SI team (around 20 people), with a direct reporting line to the Head of Strategic Insights for North America. This hybrid role will be located in Bel’s Chicago or New York City US HQ offices. The Director of Business Analytics, North America, is a strategic leadership position focused on driving data-driven decision-making and business growth across the U.S. and Canada. This role collaborates with various departments, including marketing, innovation, finance, supply chain, and sales—to turn consumer and market insights into actionable strategies. This role brings together consumer understanding, shopper insights, advanced analytics, and market performance data to shape strategy and fuel brand growth. This position also supports global initiatives by sharing North American insights and activating global Strategic Insights tools across the region. The Director of Business Analytics will have a Business Analyst as a direct report.

Main responsibilities include:

Support the Head of Strategic Insights for North America & broader North America Strategic Insights team to lead the relevant learning agenda & roadmap to address local key business priorities. 

• Leverage trends, data, consumer & shopper insights, and other relevant resources, such as macroeconomics, to inform local strategies, accelerate business growth and identify new business opportunities. 

• Identify learning gaps and turn them into learning roadmap with clear objectives.
• Manage the Analytics portion of the Strategic Insights budget with agility and a strong ROI mindset
• Leverage data & analytics agency partnerships to maximize added value. 

• Recommend potential new vendors and methodologies to address key business issues in the most efficient and impactful way.

Drive and expand data & analytics culture and usage (sell out data, consumer data, retailer data)

• Drive business and brand performance analysis and processes.
• Develop and manage analytic tools on both ongoing and ad-hoc basis in partnership with Global Business Analytics lead.
• Support the development and adoption of forecasting and analytics tools.
• Strengthen North America’s data-driven culture and insights-led decision making
• Upskill & Train the local teams leveraging analysis templates and tools developed by the Strategic Insights Business Analytics group (RGM, Sales uplift, etc.)
• Lead the data set-up of the new “(healthy) snacking” competitive environment
• Leverage various data sources (POS data, HH purchase dynamics, consumption trends, etc.) to explain drivers of business performance and inform tactical & strategic business decisions with actionable recommendations.
• Translate data into clear, persuasive reports and presentations for senior leadership.
• Support Marketing, Sales, Finance and Supply Chain teams in category and retail ad hoc analysis to understand underlying trends and impact to brand/retailer volume performance.
• Drive media effectiveness and efficiency for all brands. Provide guidance on opportunities to optimize or improve marketing effectiveness and efficiency by leveraging Growth Drivers Models.
• Recommend appropriate tools to measure marketing campaigns effectiveness and ROI (i.e. marketing mix, etc.) according to level of investment, stakes and Bel Group requirements. Partner with the global business analytics lead on measurement projects pilot and internalization (in-house MMM)
• Build and lead the North America learning agenda aligned with business priorities.
• Identify insight gaps and recommend the right mix of syndicated data and custom research.

Lead and coach the NorAm cheese & squeeze business analyst

• Actively identify strengths and areas of opportunities for the Business Analyst through regular feedback, hands on coaching and stretch assignments that build confidence and leadership capabilities.
• Build development plans for the team to grow their skillset in alignment with the company needs and vision for the North American Strategic Insights department
• Create a culture of analytical rigor by setting standards for data quality, validation and insight generation across the team.

Contribute to the Strategic Insights full team life and mission:  

• Responsible for transversal projects in the SI Community and Share business cases and best practices with other members across the globe. 
• Roll out & amplify Strategic Insights global Business Analytics programs.

PROFILE/SKILLS

Education & Experience:

• Bachelor’s degree required, Master’s preferred
• Minimum 10 years of experience and expertise as business analyst & consumer insights with a strong focus on business analytics, in FMCG space.

• Mastery working with data and data providers such as Circana/ Nielsen, Kantar, retailer data and loyalty cards analytic programs

• Experience working in a multicultural, international environment / company is necessary. 
  • Experience partnering with North American commercial teams; international experience is a plus.
  • Fluent in English; French is a plus 

 Technical skills

• Excellent analytical skills and experience manipulating large, complex datasets from multiple sources (Nielsen, IRI, etc.), coupled with solid business thinking.
• Expertise in ad hoc research
• Affinity for visualizing data in a way that is relevant to answering specific business questions 
• Business-oriented strategic thinker with strong synthesis and storytelling skills.
• Proactive, autonomous, and solutions-focused; comfortable navigating ambiguity.
• Curious mindset with interest in new tools and approaches (AI, DIY research, etc.)
• Advanced skills in Excel, Power BI, PowerPoint, Teams, and SharePoint.

Soft skills

• Accountable, autonomous & proactive  
• Strong business acumen
• Strong capacity to connect the dots: Ability to translate data analysis into clear presentations with actionable insights and recommendations.
• Strong attention to detail and ability to see the strategic implications for the business in the big picture.

• Excellent storyteller, leveraging effective & impactful communication skills
• Engaged team player with strong collaboration and cross-functional partnership skills- must be comfortable working with teams throughout the organization (horizontally and vertically), with drive and enthusiasm.
• Solid Influencing skills – has a point of view, articulates it, and can influence senior leadership at local and global level.
• Curious learner, with strong appetite for new tools and approaches (AI, DIY, etc.)
• Eager to work with people from different countries and cultures
• Flexible and agile, with capacity to overcome obstacles & create solutions when they don’t exist. Problem solving skills.

Total Rewards

• Base Salary: $185,000 - $210,000 (based on experience and location of role Chicago or NYC)
• Bonus Opportunity: 28%
• PTO and Medical, Dental and Vision Benefits from Day 1
• 401k Match

Bel Brands is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, disability status or any other basis protected by applicable federal, state, or local laws. Bel Brands also prohibits harassment of applicants or employees based on any of these protected categories. It is also Bel Brand’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

Bel Brands is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation or assistance in using the website, please call 312-462-1500.

If you think that this job is for you, please click now on the button "Apply".

PIe7bc3357528f-37344-39857975