Halron Lubricants Jobs in Usa

800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 HIRING BONUS $1500 - GREAT BENEFITS - NO WEEKENDS - HOME DAILY

$70,000+ Annually

About Us
Halron Lubricants is a trusted lubricant distributor with over 95 years of experience and locations in Green Bay, Wisconsin Rapids, Madison, and Milwaukee. We are seeking highly motivated CDL Drivers to join our Madison team. Our service area includes Wisconsin, Iowa, and Illinois.

Our Mission
To deliver exceptional value and quality to our partners by being their distributor of choice, guided by strong family values and a dedication to excellence.

Position Overview
As a CDL Driver at Halron Lubricants, you will safely and efficiently deliver products to customers while maintaining full compliance with DOT and company safety standards. Our drivers represent Halron at every stop, so professionalism, attention to detail, and strong customer service are essential.

You will work closely with dispatch and warehouse teams and will never be just a truck number. We value open communication, mutual respect, and teamwork that allows you to work safely, efficiently, and confidently while contributing to our long-term success.

What We Offer
Health insurance with strong employer contributions
Dental and vision insurance with strong employer contributions
100% company-funded Health Reimbursement Account (HRA), Life insurance, Short- & Long-Term Disability
100 % company-funded Employee assistance programs (mental health, financial, legal, family support)
401(k) with company match
Paid vacation that increases with tenure
8.5 paid holidays
Employee new/used car program
Summer youth camp reimbursement
Local routes home every night
Strong safety culture empowered to stop unsafe work
Stable, long-term career opportunities (non-seasonal)
Professional operation with well-maintained equipment
Supportive leadership that values integrity, teamwork, and accountability

Requirements
Valid Class A or B CDL with a clean driving record
Minimum 1 year of driving experience
H and N endorsements, or ability to obtain
Ability to lift up to 50 pounds
Excellent communication and customer service skills
Ability to work independently and as part of a team

Responsibilities
Safely deliver bulk oil and packaged products
Provide excellent customer service at each delivery
Maintain accurate delivery logs and records
Perform pre-trip and post-trip vehicle inspections
Follow all DOT regulations and company safety policies

PI7dda4305eb3

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $32.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: First Shift 7:00 am – 3:30 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Position Description

Torque by Ryder is immediately hiring a Permanent Full-Time Experienced Mobile Diesel Technician to support our Truck Fleet in Raleigh, North Carolina

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $36.00 per hour based on experience
  
  
• Retention Bonus: $2000 paid every quarter within the first year.
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominiqueor text “Raleigh Mobile” to 9 to speak with your recruiter today.

At Ryder, we offer outstanding benefits:

• 
  
• Generous Paid Time Off
  
  
• Medical, Dental and Vision Insurance effective 30 days from hire date
  
  
• Life Insurance and Disability Insurance Options
  
  
• 401K Savings Plan with Ryder matching contributions
  
  
• Discount on purchase of Ryder Common Stock
  
  
• Employee Discounts on Automotive, Mobile plans, Travel and Hotels
  
  
• Accredited Tech School Tuition Reimbursement
  
  
• PPE & Uniforms provided at no cost
  
  
• Paid Job training and development
  
  
• Employee & Customer Referral Bonus program
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/17/2026 4:39 PM)

Requisition ID 2

Location (Posting Location) : State/Province NC

Location (Posting Location) : City RALEIGH

Location (Posting Location) : Postal Code 27616

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $36.00/Hr.

Max Pay USD $36.00/Hr.

Fuel Dispatcher

Cadence Petroleum Group is a fast growing automotive, commercial and industrial lubricant distributor headquartered in Asheboro, NC. The Dispatcher will be responsible for planning a fleet of trucks/drivers to ensure optimum productivity, service levels and revenue.

Reporting to the Regional Operations Manager, this role is responsible for delivering and executing daily and short-term plans to achieve operational and business objectives. The below list of responsibilities is not all inclusive but provides a summary of duties for this position.

Responsibilities:

• Communicate effectively and professionally with customers, drivers and sales staff

• Coordinate deliveries for optimal productivity, service levels and revenue

• Comply with Federal Motor Carrier Safety Regulations

• Conduct monthly product inventories

• Answer phone and communicate via email in a professional manner

• Applies knowledge of customer schedules, delivery times, traffic volume and alternate routes to increase route efficiencies.

• Maintains a professional manner and appearance to enhance the company's image

• Performs other related duties as assigned

Requirements:

• Two to Three years dispatch experience

• Excellent communication skills with the ability to work in a fast-paced environment

• Ability to think independently and resolve problems as they arise without constant supervision

• Must have strong computer skills with a working knowledge of inventory control

• Have an understanding of Federal Motor Carrier Safety Regulations compliance

• Ability to supervise delivery drivers

About us:

Cadence Petroleum Group (including Pugh Lubricants, Apollo Oil, Veteran’s Oil, Halco Lubricants, Mid-South Sales, Davison Fuels and Oil, Stockman Oil, Frost Oil, Brewer-Hendley Oil, Yoder Oil, Nelson Oil, Hoosier Penn Oil Company, Union Petroleum Group, Glockner Oil and BOC Oil Company) is a leading distributor of automotive, commercial, and industrial lubricants in the eastern United States and fuels in the Alabama, South Carolina, Georgia, Louisiana, Mississippi, Tennessee, Arkansas, Missouri, Oklahoma and Florida Panhandle markets. We serve the needs of our customers throughout the Carolina's, Virginia, Tennessee, West Virginia, Kentucky, Ohio, and in portions of Georgia, Alabama, Mississippi, Louisiana, Texas Missouri, Oklahoma and Arkansas. Our objective is to provide our customers with the best products and services. Cadence Petroleum Group and our suppliers stand behind the products we offer. Regardless of the industry, we have solutions specifically designed to improve your business whether you want to increase traffic to your door or decrease equipment downtime.

Outside Sales Representative | Unlimited Commission Potential

Build a business, not just a sales role.

Schaeffer Manufacturing Company (Remote | 1099 Independent Contractor)

Schaeffer Manufacturing is seeking experienced, self-driven professionals who want to build a long-term, repeat-order business—not chase one-time transactions.

With over 185 years of American-made manufacturing excellence, Schaeffer Oil is a trusted leader in premium lubricants and fuel additives that deliver measurable performance, reduce downtime, and lower operating costs for customers across industrial and fleet markets.

This is a business-building opportunity for professionals who value relationship-based selling, account development, and long-term income growth through selling consumable products.

What You Will Sell

• Industrial lubricants and hydraulic oils
• Heavy-duty engine oils and diesel lubricants
• Gear oils and specialty industrial fluids
• High-performance greases
• Fuel additives for diesel and gasoline systems
• Specialty products and aerosols

Role Overview

You will develop and manage accounts across:

• Manufacturing and industrial operations
• Fleet and transportation
• Construction and heavy equipment
• Agriculture and mining
• Food production and equipment maintenance

Your focus will be consultative selling— and we train you how to provide technical solutions and products that improve equipment reliability, extend service intervals, reduce maintenance costs, and create measurable value for customers.

Compensation Structure

• Independent contractor (1099)
• Unlimited commission structure
• Monthly and annual performance bonuses
• Income growth tied to account development and repeat business
• Six-figure income potential for disciplined, consistent builders

Training and Support

• Structured technical and sales training programs
• In-field training and virtual onboarding training
• Access to product specialists and technical advisors
• Ongoing education and professional development
• Marketing tools and sales infrastructure

Why Professionals Choose Schaeffer

• 185+ years of brand credibility
• Premium product portfolio with proven performance differentiation
• Repeat-order, consumable business model
• Long-term account value and income sustainability
• Business ownership model without franchise risk
• Strong corporate support with independent autonomy

Ideal Candidate Profile

This opportunity is well-suited for professionals who value:

• Relationship-based selling
• Long-term account development
• Business ownership mindset
• Income scalability
• Independence with structure

In this role, you operate as an independent business owner, not an employee. You control your schedule, your growth, your income, and your market development. There is no daily management, no micromanagement, and no corporate quotas tied to clocking hours.

What Schaeffer provides:

• A proven product line
• A trusted brand
• Technical training
• Sales systems
• Corporate infrastructure
• Support teams
• Marketing tools

What you build:

• Your book of business
• Your recurring revenue
• Your income stream
• Your long-term equity
• Your own schedule
• Your Freedom

Ready to take the next step?

If you are interested in building a long-term business with a proven brand and performance-driven products, apply to learn more about the market opportunity in your local area.

At BlueOval Battery Park Michigan, you will...
• use your entrepreneurial skills and team mindset to come up with data-driven solutions
• build and lead an agile team to deliver the advanced technology that drives the future
• create a culture of trust, encourage diversity of thought and foster leadership in others
• be part of the historic transformation of the automotive industry.

*****During training and initial launch, the operating pattern will be an 8-10 hour shift and then transition to a 12-hour shift schedule.*****

What you'll do...
Key responsibilities may include:
• Fire Suppression:
o Respond immediately and effectively to all types of fires using appropriate extinguishing agents and equipment.
o Operate and maintain fire apparatus, pumps, hoses, nozzles, and other specialized firefighting equipment.
o Conduct search and rescue operations for personnel within hazardous environments.
o Perform ventilation, overhaul, and salvage operations as required.
• Hazardous Materials (HazMat) Response:
o Identify, assess, contain, control, and mitigate spills or releases of hazardous materials.
o Utilize appropriate personal protective equipment (PPE), including Self-Contained Breathing Apparatus (SCBA) and various levels of chemical protective suits.
o Understand chemical properties, potential reactions, and safe handling procedures for materials present in the facility.
o Perform decontamination procedures for personnel and equipment.
• Medical Aid:
o Provide immediate pre-hospital medical care, including first aid, CPR, and AED operation, to injured or ill personnel.
o Stabilize patients and assist on site medical staff and external Emergency Medical Services (EMS) personnel upon their arrival.
• Technical Rescue:
o Participate in specialized rescue operations such as confined space rescue, high-angle rescue, and machine rescue, as trained and equipped by the facility.
o Utilize specialized rescue tools and techniques safely and effectively.
• Emergency Standby & Hot Work Coverage:
o Provide dedicated fire and safety coverage for high-risk operations within the facility, such as hot work (welding, cutting), confined space entry, or hazardous material transfers.
o Ensure all safety protocols and permit conditions are strictly adhered to during standby operations.
• Incident Command System (ICS) Support:
o Operate effectively within the established Incident Command System (ICS) structure during emergencies.
o Follow direct orders, maintain accountability, and provide clear, concise status reports to the Incident Commander or assigned supervisor.
• Maintenance:
o Regularly inspecting, cleaning, lubricating, and performing scheduled maintenance on fire prevention equipment like fire suppression system components, fire alarm system components and fire extinguishers.
o Perform routine inspections, functional tests, cleaning, and minor maintenance on all fire apparatus, tools, and equipment (e.g., hoses, nozzles, SCBA, pumps, rescue tools, HazMat detection devices, etc.) to ensure compliance and peak operational readiness.
o Ensure all internal apparatus fire pump components are operating properly, lubricate control valves, and identify any issues that require correction.
o Document all maintenance activities and report any unresolved deficiencies or malfunctions promptly.

o Collaborate with production operators, engineers, and maintenance technicians to identify and address fire prevention equipment issues, isolate compromised fire prevention system(s), and manage fire suppression system impairments.

• Facility Inspections:
o Conduct routine and systematic fire safety inspections of buildings, processing units, storage areas, and equipment to identify potential fire hazards, unsafe conditions, or non-compliance issues.
o Inspect fire suppression systems (sprinklers, standpipes, fire alarms), fire extinguishers, emergency lighting, and exit routes for proper function and readiness.
• Pre-Incident Planning:
o Participate in the development and review of pre-incident plans for various scenarios throughout the facility.
o Thoroughly understand building layouts, process flow diagrams, hazardous material locations, utility shut-offs, and emergency egress routes.
• Permit System Compliance:
o Review and verify compliance for hot work permits, confined space entry permits, and other safety-related permits, ensuring all conditions are met before and during operations.
• Risk Assessment:
o Actively participate in identifying and assessing risks related to fire, explosion, and other emergencies within the industrial environment.
• Safety Adherence:
o Strictly adhere to all company policies, Standard Operating Procedures (SOPs), safety regulations, and industry best practices.
o Proactively identify, report, and help mitigate unsafe conditions or practices observed within the facility.
o Consistently and correctly wear and maintain all required Personal Protective Equipment (PPE).
• Inventory Management:
o Maintain accurate inventory of all firefighting supplies, HazMat absorbents, medical supplies, and rescue equipment.
o Ensure proper storage and accessibility of all emergency response assets.
• Continuous Learning:
o Actively participate in all required internal and external training programs, drills, and exercises, including but not limited to: fire suppression techniques, HazMat operations/technician level, medical refreshers, technical rescue disciplines, and SCBA proficiency.
o Maintain physical fitness standards necessary for the demanding nature of the job.
• Internal Training Support:
o Assist in developing and delivering fire safety and emergency preparedness training to facility personnel (e.g., fire extinguisher use, emergency evacuation procedures, basic first aid).
• Incident Reporting:
o Accurately and thoroughly document all incidents, near-misses, inspections, training activities, and equipment maintenance in logs, reports, and digital systems.
o Provide clear and concise written and verbal reports.
• Effective Constructive Communication:

o Use constructive communication skills with team members, peers, leadership, facility personnel and external emergency services during routine operations and emergencies to demonstrate the following behaviors:

• Focus on the issue not the person
• Use Active Listening
• Have a Respectful Cooperative Attitude
• Use Clear Positive Language
• Have awareness of your Non-Verbal Communication
• Be Goal-Oriented in your approach to resolve issues

• Shift Handovers:
o Conduct thorough and detailed handovers at the end of shifts, ensuring critical information and pending tasks are clearly communicated to incoming personnel.

Candidates must possess full flexibility and a readiness to consistently work across all established standard, operating, and rotational shift schedules, encompassing day, night, weekend, and holiday shifts.

You'll have...

Required Skills and Qualifications:
Minimum requirements:
• Must be at least 18 years of age
• High School Diploma
• NFPA 1001 Firefighter I & II (or equivalent state/provisional certification)
• CPR/AED and First Aid Certification
• Minimum of 2 years of emergency services experience as a certified firefighter
• Previous Emergency Services experience or combination of previous work experience and training equivalent
• Strong problem-solving and critical thinking skills under pressure.
• Excellent decision-making abilities in high-stress situations.
• Exceptional teamwork and interpersonal communication skills.
• Ability to pass a NFPA firefighter physical.
• Acute attention to detail and strong observational skills.
• Ability to strictly follow instructions, SOPs, and safety protocols.
• Exceptional computer skills, reading and data interpretation
• Comfortable learning new technology
• Legally authorized to work in the US

• NFPA 472/1072 Hazardous Materials Operations Certification
• EMT-B or higher
• Relevant Technical Rescue certifications (e.g., Confined Space Rescue, High-Angle Rescue, Vehicle Extrication)

You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply!

Rate of Pay and Benefits: $28.20 per hour

As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder...or all of the above? No matter what you choose, we offer a work life that works for you, including:

• Immediate medical, dental, vision and prescription drug coverage
• Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more
• Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more
• Vehicle discount program for employees and family members and management leases
• Established and active employee resource groups
• Paid time off for individual and team community service
• A generous schedule of paid holidays, including the week between Christmas and New Year's Day
• Paid time off and the option to purchase additional vacation time.
For more information on salary and benefits, click here: sponsorship is not available for this position.
Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call 1-888-336-0660.

#LI-Onsite

Overview: Salary Details: $30.00/hour Job Status/Type: Full-time, year-round, union.Position Level: Entry-Mid levelShift/Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs.

In this role, you will perform inspections, maintenance, lubrication, troubleshooting, and repair of all rides and devices.Responsibilities: Perks:Complimentary tickets for friends and familyDiscounts on food and park merchandiseFull-time and part-time employee events and gatheringsResponsibilities:Responsible for all mechanical maintenance in regards to amusement rides and devices.Operate machine shop equipmentNotify maintenance of equipment problems, building repairs, etc.

necessary to ensure safe and efficient operation.Read and understand checklists, instruction manuals, etc.Maintain inventory of equipment.Assist in the inspection, routine maintenance, lubrication, and repairs of rides as instructed including replacement of bearings, wheels, miscellaneous parts, and oil changes.Maintain daily log sheets of inspections and repairs performed.Other duties may be assigned.Qualifications: Qualifications:High school graduate or GED.Must provide own hand tools.Must join Laborers Union.Good record and writing skills.Able to work at heights, including from catwalks, aerial lifts, crane baskets, scaffolding, and structure climb.Ability to demonstrate experience in electronic, electrical, and mechanical work.Mechanical aptitude and experience with hand tools.Ability to follow manufacturer's manuals and blue prints.Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law.Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.#LI-UW1#LI-UW1#l##li-