Gate Remote Control Programming Jobs in Usa

Position Summary

603 Manufacturing is growing, and we are looking for a hands-on, detail-driven NPI / Manufacturing Engineer who thrives on turning complex, high-reliability builds into clean, repeatable, audit-ready processes. This role is especially critical as we support customers in the space and aerospace sectors, where documentation, traceability, and process control are non-negotiable. If you get fired up about transforming first builds into flight-ready production systems, this role is for you.

What You’ll Do

Lead New Product Introduction (NPI)

• Own the manufacturing ramp-up for new cable and electro-mechanical assemblies
• Translate engineering drawings, specifications, and customer requirements into production-ready processes
• Support and fully document first piece builds from prototype through production release
• Ensure builds meet space and aerospace level workmanship and documentation standards

Develop Flight-Ready Work Instructions

• Create clear, visual, step-by-step work instructions for complex cable assemblies
• Standardize documentation across programs to meet customer and regulatory expectations
• Build controlled, revision-managed documentation packages
• Incorporate inspection criteria, torque values, crimp specifications, test procedures, and traceability requirements

Space and Aerospace Compliance

• Interpret and implement customer flow-down requirements
• Ensure compliance with applicable standards such as:
• IPC/WHMA-A-620, Space Addendum preferred
• NASA workmanship standards where applicable
• AS9100 principles and documentation rigor
• Establish full material traceability and lot control processes
• Support first article inspections and customer audits
• Build processes that are repeatable, traceable, and audit-ready

First Piece and Process Development

• Capture photos, tooling setups, fixturing, inspection points, and lessons learned during first builds
• Identify risk areas early including handling, routing, strain relief, testing, and labeling
• Define quality gates and inspection checkpoints
• Convert tribal knowledge into controlled documentation

Standardization and Continuous Improvement

• Develop scalable templates for cable assembly documentation
• Drive consistency across programs and operators
• Improve throughput while maintaining zero-defect expectations
• Reduce variability in high reliability builds

What Makes You a Great Fit

• 5 or more years in manufacturing engineering, NPI, or process engineering
• Direct experience supporting space, aerospace, or other high-reliability customers
• Strong understanding of:
• IPC/WHMA-A-620, Space Addendum strongly preferred
• First Article Inspection, AS9102 experience a plus
• Configuration control and revision management
• Lot traceability and material control systems
• Experience building processes that withstand customer audits
• Comfortable on the production floor. This is not a desk-only role.
• Process-driven, detail-focused, and quality-first mindset

Bonus Points If You Have

• Experience supporting NASA, commercial space, or defense programs
• Experience working in an AS9100 environment
• Familiarity with controlled documentation systems such as PLM, ERP, or QMS
• Lean or Six Sigma background
• Experience building documentation systems from scratch

What Success Looks Like

• New space programs transition from first article to stable production smoothly
• Documentation passes audits without scrambling
• Full traceability exists from raw material to finished assembly
• Operators have clear, easy-to-follow instructions
• Builds are consistent, repeatable, and flight-ready

Why 603 Manufacturing?

We support customers who cannot afford failure. When it goes to space, it must work.

At 603, we are building the systems, documentation discipline, and manufacturing rigor to support high-reliability programs. We need engineers who understand what that truly requires.

You will not just document processes here. You will build the foundation for flight-ready manufacturing.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is seeking Senior Airborne Electronic Hardware (AEH) Engineer (Level 5)to join our team in Everett, Washington.

Position Overview:

The selected individuals will work within Boeing organizations and interface with suppliers to oversee development of Application Specific Integrated Circuits, Field Programmable Gate Arrays and Programmable Logic Device changes, ensure application of best industry and Boeing requirements and assure compliance with regulatory requirements.  Engineers applying for this position must understand RTCA/DO-254 and the relationship between complex electronics.  Highly desired are engineers with recent experience showing or finding compliance for airborne electronic hardware.

Position Responsibilities:

• Oversee and guide teams with airborne electronic hardware devices in development of airplane systems.

• Provide either showing of compliance or assisting in finding of compliance roles in accordance with FAA regulations associated with Airborne Electronic Hardware development.

• Provide direction to suppliers to improve their performance to contractual requirements (quality, delivery, cost, technical, safety, communication, etc.).

• Support audits and design reviews.

• Evaluate risks and opportunities; assist suppliers in implementing risk mitigation plans.

• Work with internal and external resources, utilizing tools, processes and methods to enhance supplier performance to meet customer and program requirements.

• Establish and maintain relationships with suppliers in support of airplane systems objectives.

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA.

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 7+ years of experience in developing complex electronic and electrical systems such as electronic device development, verification or compliance finding activities.

• 5+ years of experience in engineering, associated with certified airborne electronic hardware.

Preferred Qualification (Desired Skills / Experience):

• Ability to travel up to 15% of the time

• Bachelor's and 10+ years of experience or Master's and 7+ years of experience

• FAA Designated Engineering Representative, Authorized Representative or Engineering Unit Member in a company’s delegated compliance organization

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

$198,000 – $239,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Under the direction of the Engineering Manager, the Design Engineer is responsible for the support of new and existing products. This support may include, but is not limited to, product development, prototype generation, laboratory testing and problem solving, from concept to production.

ESSENTIAL DUTIES AND RESPONSIBILITIES

All employees work to satisfy the customer. Each department has expected core responsibilities, but these responsibilities do not define us. Rather, they simply provide a starting point where we work to satisfy the customer, and continuously improve ourselves, others, and the organization.

· Responsible for understanding the customer’s technical scope of work and delivering designs that meet or exceed expectations.

· Analyzes engineering sketches, specifications, data, drawings and models to determine design factors as well as tolerancing.

· Uses computer aided design tools for two- and three-dimensional magnetic analysis, computation fluid analysis, structural finite element analysis to develop and optimize designs.

· Designs for manufacturability

· Uses lab equipment such as force testers, multimeters, flow meters and environmental chambers to ensure products exceed customer requirements.

· Uses hand tool, soldering tools, and presses to build prototypes and customer evaluations

· Participates and/or leads design reviews and records meeting notes and lessons learned.

· Evaluates and approve design changes, specifications, and drawing releases to ensure compliance with both internal and external specifications and standards.

· Controls drawings, models, and other applicable documents.

· Shall utilize and improve engineering tools with the goal of creating and following consistent processes that ends with a predictable result. Examples of tools include Phase-Gate, FMEA, Control Plans, Engineering Change process, Tolerance Stack-up Calculations, Force Balances, Design for Manufacturing tools, Design Verification Plans, Process Validation, Capability Studies, Measurement System Evaluations, Quality Management and Production Part Approval Processes.

· Support sales staff by providing technical data to present to customers.

· Interface with other departments within and external customers and suppliers.

· Follows policies and procedures according to Quality Management System.

· All other duties as assigned.

Design Engineer

Behavioral

· Must have the potential to advance to Sr Design Engineer

· Proactive on tasks (Completes in a timely manner, uses tools to track task)

· Responsible (demonstrate that others can trust you)

· Demonstrates that he or she can be part of a solution (both technical and behavioral)

· Good verbal and written skills, in both a technical and non-technical environment

Demonstrated Competence:

· Good mechanical aptitude, and working knowledge of different materials (metals, plastics, etc.), coatings/finishes, and hardware.

· Good working knowledge of different manufacturing processes; CNC, injection molding, welding, turning, milling, etc.

· Good working knowledge of spring design

· Ability to support customer meetings and work directly with customers on design-related tasks.

· Ability to work with suppliers as it relates to prototype builds and associated changes and corrections.

· Able to design product(s) with input from others on lessons learned and best practices.

· Tends to work on projects, and not programs involving multiple designs and products.

· Participates in Root Cause analysis, DFMEAs, PFMEAs, Control Plans, Corrective Actions and other Quality activities.

· Understands the Cost of Goods (COGS) and how design impacts the material and manufacturing costs.

· Identifies design constraints and works with internal and external resources to resolve the constraints.

· Understands and utilizes all applicable processes and procedures.

Education and/or Experience:

· Bachelor's Degree (BS) from an accredited college or university in an Engineering related field or acceptable type and amount of work experience in a design role.

· 1-year design experience.

· Basic working knowledge of Microsoft Suite of products with a strong working knowledge of Excel.

· Demonstrated knowledge of SolidWorks or other 3D Modeling software.

· Experience with DFMEA, PFMEA, DOE, and other AIAG procedures preferred.

· Experience with magnetic analyses, computation fluid dynamics and finite element analysis preferred.

The Public Safety Security & Loss Prevention Internship Program offers students and aspiring professionals hands-on experience in security operations, guest safety, and asset protection within a dynamic environment. Interns will work alongside seasoned professionals to develop practical skills in surveillance, incident response, and theft prevention while gaining insight into the operational aspects of a large-scale facility.
Responsibilities:

• Consistent attendance and adherence to the posted schedule is a job requirement. Includes attendance of Park Discovery training, Security department training, and Security in-service training.
• Must meet all Human Resources requirements for internship program, including attendance of intern events/meetings.
• Maintain Park grooming and appearance standards in accordance with policies set forth by the Human Resources department. Maintain department uniform guidelines in accordance with policies set forth by the Security department.
• Interact with guests, team members, and Park management on a daily basis. Work with a diverse team and cooperate with all team members and Park management.
• Communicate effectively with guests – able to answer basic questions and give directions. Proactively approach guests to offer assistance, recommendations, and conversation.
• Communicate effectively with team members and Park management – able to relay information or respond to inquiries in person, by phone, and by portable radio.
• Complete all required Six Flags Public Safety - Security certification tests.
• Work fixed positions designed to monitor guest entry and exiting:
  • Properly and consistently screen all guests via metal detection and according to department policy. Includes enforcement of prohibited items, guest behavior, and dress code policies.
  • Work efficiently to screen guests in order to minimize the wait time to enter the Park.
• Work fixed positions designed to monitor team member and visitor entry/exit (backstage gates):
  • Validate team member entry by checking Park issued ID cards and vehicle stickers.
  • Validate visitor entry by following established clearance procedures and coordinating visitor appointments with Park management.
• Work patrol positions designed to respond to security-related incidents, emergencies, and calls for assistance:
  • Assist guests with problem-solving and Park policy interpretation.
  • Monitor and enforce adherence to Park policies, specifically related to guest code of conduct and ride safety.
  • Rapidly respond to emergencies or calls for assistance according to department policy and/or at the direction of department management.
• Work toll and mobile positions designed to monitor the guest parking lot and toll lanes:
  • Operate hand-held electronic device to scan passes for parking.
  • Operate touch-screen point of sale (POS) system for credit/debit card transactions.
  • Monitor and control access to preferred/membership parking area.
  • Direct inbound/outbound vehicle traffic safely by using proper/visible hand signals and traffic control devices (i.e. cones, directional signs, etc.).
  • Monitor overall traffic flow and parking lot capacity. Adjust traffic flow as needed or directed.
• Work positions designed to assist Lost Services:
  • Monitor lost children brought to the post until they are reunited with parent/guardian.
  • Assist parents/guardians searching for lost children and keep accurate record of all children reported lost.
  • Properly handle lost items, including valuables and currency that are turned into Lost & Found and/or Security.
  • Enter lost item reports into web-based lost and found tracking database (Chargerback System). Update reports as needed.
• Work fixed position designed to support and administer overall Security operation:
  • Answer and screen incoming phone calls. Transfer calls and take/deliver accurate phone messages.
  • Monitor all Security and Park radio traffic. Answer radio calls and provide appropriate responses. Includes dispatching and coordinating response to security-related calls for service, emergencies, and requests for assistance.
  • Broadcast information, alerts, and/or messages over all Park radio channels as directed.
  • Create and track calls for service in computer dispatch system. Accurately account for active calls for service, officer assignments, and officer locations at all times.
  • Monitor Park alarm system, surveillance systems, and weather tracking/alert system.
• Work alongside the Loss Prevention Investigators:
  • Monitor surveillance systems.
  • Gain an understanding of fixed and mobile surveillance efforts, including CCTV installation and maintenance.
  • Collect information from fixed surveillance, overt and covert camera systems, undercover operatives, secret shoppers, and field agents to assist in employee investigative interviews.
  • Assist or facilitate investigations and investigative interviews of employees who have been shown to be involved in impropriety.
• Work with Loss Prevention Undercover Agents:
  • Conduct shoplifting surveillance and shoplifter detention.
  • Observe scalping activity and evasion cases.
  • Conduct sting operations, electronic surveillance and preventative measures against theft.
  • Create and maintain a detailed shoplifting log
• Complete departmental reports and/or required paperwork according to department policy. This includes completing reports and paperwork in an understandable, professional, and timely fashion.
• Keep all information and documents confidential.
• Use and operate all Park equipment safely and correctly.
• Assist with Park and post cleaning as needed or directed. Maintain a neat and organized work location at all times.
• Maintain all job duties and responsibilities in outdoor weather conditions – regularly exposed to direct sunlight, wet/humid conditions, extreme cold, and extreme heat for extended periods of time.
• Maintain all job duties and responsibilities independently with minimal direct supervision.
• Adhere to all Park labor policies pertaining to breaks taken, length of shift, and types of work performed. Accurately record all shift and break times by using Park’s labor tracking system

• 18 years of age or older. Applicants must possess a valid Driver’s License. Applicants enrolled in an associate’s or bachelor’s level criminal justice or related program.
• Must be able to stand and/or walk up to 8 hours at a time and as many as 12 hours a day. This includes standing at a fixed position for extended periods of time.
• Must be capable of working in all outdoor weather conditions – regularly exposed to direct sunlight, wet/humid conditions, extreme cold, and extreme heat for extended periods of time.
• Must be able to lift up to and including 25 lbs. consistently.
• Must have strong verbal and written communication skills. Must be able to speak, understand, read, and write in English language.
• Must be able to listen/monitor radio communication by earpiece while simultaneously communicating to guests and team members in their presence.
• Must be comfortable using a computer and be capable of learning to use applications designed to monitor access control and complete incident reports.
• Must be able to work around a metal detector and complete guest and team member screening according to department policy and with department-provided equipment.
• Must be “safety-conscious” and aware of surroundings while on duty. Job positions include moving in/out of raised guard houses, working around metal detection equipment, directing vehicle traffic as well as working in close proximity of moving vehicles, and working in large crowds.
• Must be willing to practice general housekeeping and maintain the cleanliness of assigned job position.
• Must possess strong work ethic, the ability to multi-task, and be able to handle moderate levels of stress.
• Must be able to work with others and as a contributing part of a team / the department.
• Must be self-motivated, possess an enthusiastic attitude, and conduct themselves in a professional manner at all times. This includes times and/or positions where job duties must be completed independently with minimal direct supervision.

Immediate need for a talented R&D Project Manager. This is a 12+ months contract opportunity with long-term potential and is located in San Diego, CA(Hybrid). Please review the job description below and contact me ASAP if you are interested.

Job ID:26-08555

Pay Range: $60 - $90/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Lead and manage multiple R&D programs and/or large-scale product development projects, from feasibility through commercialization, including Class II and/or Class III medical devices (with emphasis on electrically active/medical electrical equipment where applicable).
• Develop and maintain integrated program plans, timelines (Gantt charts), budgets, resource plans, and risk registers; proactively identify and mitigate risks across technical, regulatory, clinical, commercial, and electrical safety dimensions.
• Define project scope, objectives, deliverables, and success criteria; create and maintain project charters, work breakdown structures (WBS), and detailed schedules.
• Lead cross-functional core teams (R&D/Engineering, Quality, Regulatory Affairs, Clinical, Manufacturing, Marketing, and Operations) to execute program objectives; facilitate effective decision-making and resolve conflicts.
• Drive adherence to Design Control processes (21 CFR 820.30), risk management (ISO 14971), usability engineering (IEC 62366), basic safety and essential performance requirements for medical electrical equipment (IEC 60601-1 series), and other applicable standards throughout the product lifecycle.
• Provide regular status updates, executive-level reporting, and dashboards to senior leadership and stakeholders; communicate program progress, issues, decisions, and changes clearly and proactively.
• Support regulatory strategy development and submissions (e.g., 510(k), PMA, technical files for CE marking), including coordination of electrical safety testing, EMC compliance (IEC 60601-1-2), and collateral/particular standards as needed.
• Foster a collaborative, innovative, and compliant culture within program teams.
• Oversees and manages the operational aspects of ongoing projects and serves as liaison between project management and planning, project team, and cross functional teams management.
• Lead cross-functional teams through identification of risks & mitigations, problem resolution and root cause analysis, corrective and preventive action.
• Develop and maintain integrated project plan with risk-based timeline, critical path milestones, resource allocation, roadmap with clear milestones for gap analysis, risk management, remediation, testing, certification and budget tracking to support certification goals
• Monitor the effectiveness and performance of the launch and project team and facilitate the development of contingency plans, recommending corrective actions as required.
• Ensure compliance with quality management systems and regulatory requirements, where applicable.
• Lead the team to prepare for and execute Phase Gate. Represent the team with Client leaders, ensuring such decisions are informed by a balanced and clearly articulated representation of the relevant data.
• Leverage technical acumen to partner with engineering teams, monitor development progress, and ensure alignment between technical deliverables and program timelines
• Drive design control discipline throughout product development, ensuring compliance
• Conduct or oversee gap assessments against general, collateral, and particular standards for medical electrical equipment safety and essential performance.
• Manage integrated risk management (per ISO 14971), including essential performance definition, hazard analysis, risk controls, and verification.
• Coordinate and manager the execution of test plans for electrical safety, EMC, mechanical, environmental, and essential performance requirements; coordinate pre-compliance and formal third-party testing.
• Oversee compliance documentation: technical files, risk management files, test reports, essential performance rationale, and certification justification.
• Integrate compliance activities with the quality management system (ISO 13485) and other regulatory requirements (FDA, EU MDR, etc.).
• Serve as primary liaison with notified bodies, test labs, and regulatory consultants to support certification and post-compliance needs.
• Drive a safety-focused culture while ensuring the team meets the September 2027 compliance target

Key Requirements and Technology Experience:

• Key Skills;Bachelor’s degree in Engineering (Biomedical, Electrical, Mechanical, or related),Life Sciences, or equivalent.
• 3-5 years of project management in medical devices, with ≥5 years leading compliance programs for medical electrical equipment.
• Proven track record of successfully delivering medical device programs from concept to market launch (including regulatory clearance/approval).
• Strong knowledge of FDA Quality System Regulation (21 CFR Part 820), ISO 13485, ISO 14971 risk management, IEC 62304 (software), and global regulatory pathways (510(k), De Novo, PMA, MDR).
• Proficiency with project management tools (e.g., MS Project, Jira, Smartsheet, or similar) and standard office software.
• Project Management Professional (PMP) certification not required but is preferred
• Scrum Master and SAFE Agile certification is preferred.
• Experience in medical device industries required, including experience in FDA or other regulated environments.
• Knowledge of the medical device industries beneficial integrating science and technology into business processes.
• Technical background in electrical, mechanical, or biomedical engineering
• Expert in the development and deployment of program management tools and techniques including methods for tracking progress, risk management and delivery of major milestones.
• Understanding of engineering development lifecycles and the ability to translate technical inputs into program-level actions and timelines
• Excellent influencing skills with the ability to achieve challenging goals through others without direct authority across different functions, external partners, geographies, and cultures.
• Drive for accountability within self and others.
• Proven project management experience with delivering medium-to large-scale projects in managed service model from concept through delivery and operations
• Relentless advocacy for the customer with a focus on meeting or exceeding customer requirements.
• Driving the team to make trade-offs that optimize customer and business value while maintaining program velocity and outcomes that sustain the highest standards of quality.
• Direct experience with major test labs and certification bodies for medical electrical equipment standards.
• Experience with programmable electrical medical systems (PEMS) or software-inclusive devices (IEC 62304 knowledge a plus)
• Proven success taking Class II (or higher) active medical electrical devices from gap assessment through third-party certification.
• Strong knowledge of ISO 14971, ISO 13485, general/collateral/particular standards for medical electrical safety and essential performance, and EMC requirements.
• Familiarity with FDA QSR (21 CFR Part 820), EU MDR/IVDR, or other global regulations.

Our client is a leading Pharmaceutical Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.