Gate Remote Control Code Jobs Full Time Jobs in Usa

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Title- Sr. Azure Solutions Architect

Location- Dallas, TX- Onsite

Type- Fulltime

Job Description:

AgreeYa Solutions is hiring a permanent Senior Azure Solutions Architect to anchor our growing Azure practice. This is a high-impact, client-facing role that spans the full engagement lifecycle — from structured cloud readiness assessments and gap analysis through hands-on architecture design and implementation delivery.

The successful candidate will lead our Azure infrastructure engagements across multiple client accounts, beginning with a structured cloud readiness assessment and transitioning into ongoing architecture and delivery responsibilities as the practice grows. This role requires equal comfort operating as a trusted advisor, assessment lead, and delivery architect — adapting to the engagement phase and client context.

Responsibilities

1. Cloud Readiness Assessment & Advisory

Lead structured, evidence-based Azure cloud assessments aligned to Microsoft Cloud Adoption Framework (CAF) and Security-first SDLC principles:

Conduct current-state Azure tenant reviews across all platform domains: tenant topology, management group hierarchy, subscription structure, RBAC model, and policy framework.

Assess identity and access configurations including Microsoft Entra ID, Privileged Identity Management (PIM), Conditional Access policies, and GitHub/Azure DevOps RBAC.

Evaluate security posture using Microsoft Defender for Cloud, Zero Trust alignment, vulnerability management, and network exposure analysis (NSGs, firewall rules, public vs. private endpoints).

Perform regulatory compliance gap assessments against NYDFS Part 500, SOC2 Trust Services Criteria, and other applicable frameworks, producing risk-rated gap registers.

Review IaC and CI/CD maturity including Terraform state management, drift detection, pipeline health (Azure DevOps / GitHub Actions), and non-prod to prod promotion workflows.

Assess monitoring and observability stacks: Azure Monitor, Log Analytics, Application Insights, alert coverage, ITSM integration, and MTTD/MTTR benchmarking.

Evaluate backup and DR configurations, RTO/RPO alignment, recovery runbook completeness, and business continuity readiness.

Review FinOps maturity: cost governance, resource tagging, reserved instance utilization, and savings plan coverage.

Produce executive-ready deliverables: current state reports, gap registers, remediation roadmaps, Target Operating Models (TOM), and C-level presentation decks.

Define objective go-live entry criteria and identify critical blockers that materially increase breach, outage, or compliance exposure.

2. Azure Platform & Infrastructure Architecture

Design and govern Azure platform environments for client workloads with a Terraform-first, pipeline-driven approach:

Define and maintain reference architectures across all stack layers: identity (Entra ID / Auth0 / Okta CIC), application (App Service / AKS), PaaS (Key Vault, Front Door / WAF, API Management), networking, data, storage, and monitoring.

Architect isolated, per-environment landing zones (QA, Stage, Prod) including VNets, subnets, NSGs, Private Endpoints, and firewall rules enforcing least privilege and environment segmentation.

Lead the design of Terraform IaC modules and environment promotion patterns (QA → Stage → Prod), including remote state management, state isolation, and change control governance.

Partner with DevOps engineers to design Azure DevOps multi-stage YAML pipelines for infrastructure and application deployments, including approval gates, rollback strategies, and release tagging.

Architect highly available, secure, scalable, and cost-optimized solutions incorporating backup, disaster recovery, and business continuity strategies.

Define cloud security standards: network segmentation, Zero Trust architecture, WAF and DDoS protection, encryption, and key management.

Set observability standards: App Insights/Log Analytics workspaces, KQL-based alerting, dashboards, Sentinel workbooks, and WAF policy-as-code.

Translate business, compliance, and regulatory requirements (including NYDFS MFA and security mandates) into concrete Azure architecture decisions and technical guardrails.

3. Client Engagement & Delivery Leadership

Operate as a trusted technical advisor and delivery lead across client engagements:

Serve as the primary Azure technical point of contact for clients, including C-suite and senior technical stakeholders.

Lead architecture reviews, technical workshops, and go/no-go decision sessions with structured evidence and documentation.

Translate business and compliance requirements into actionable architecture decisions and phased remediation roadmaps.

Provide Level 2 architectural support during critical delivery windows including rollouts, environment rebuilds, production cutovers, and hypercare periods.

Document architecture decisions, diagrams, runbooks, and ensure these are reflected in implementation and quality gates.

Mentor and guide junior engineers and offshore team members, providing technical direction and code/configuration review.

Support structured MSP onboarding activities including RACI definition, responsibility demarcation, and takeover domain identification.

Required Qualifications

8+ years of hands-on experience designing and implementing solutions on Microsoft Azure, with at least 5 years in an architect or technical lead capacity.

Deep expertise across core Azure services including:

Compute: Azure Web Apps, App Service, Azure Kubernetes Service (AKS), Azure Functions

Networking: VNets, NSGs, Private Endpoints, Azure Front Door, WAF, VPN/ExpressRoute

Integration & API: Azure API Management, Service Bus, Event Grid

Data & Storage: Azure SQL, Cosmos DB, Storage Accounts (Blob, Queue, Table)

Security: Key Vault, Microsoft Defender for Cloud, Sentinel, Azure Policy

Identity: Entra ID (Azure AD), PIM, Conditional Access

Observability: Azure Monitor, Log Analytics, Application Insights, KQL

Proven experience architecting and governing Terraform-based infrastructure in Azure, including module design, remote state backends, environment isolation, and promotion workflows.

Strong background with Azure DevOps (Repos, Pipelines, Artifact Feeds) and CI/CD patterns for both application and infrastructure, including multi-stage YAML and environment approvals.

Demonstrated experience conducting structured cloud assessments, gap analyses, and producing risk-rated findings and remediation roadmaps aligned to frameworks such as Microsoft CAF, CIS, or NIST.

Solid understanding of identity and access management including Entra ID, OAuth/OIDC flows, MFA enforcement, RBAC, and CIAM solutions (Auth0 / Okta CIC).

Working knowledge of regulatory and compliance frameworks applicable to cloud environments, particularly NYDFS Part 500 and SOC2 Trust Services Criteria.

Strong knowledge of cloud security best practices: Zero Trust, network segmentation, WAF and DDoS, encryption, key management, and vulnerability management.

Experience defining monitoring, alerting, and observability strategies using Azure Monitor, Log Analytics, Application Insights, and SIEM tools such as Sentinel.

Excellent communication and documentation skills, with proven ability to produce executive-level presentations, architecture decision records, and go/no-go assessment reports.

Preferred Qualifications

Familiarity with FinOps practices including cost governance, resource tagging strategy, reserved instance analysis, and Azure cost management tooling.

Experience with ITSM integration and tooling including ServiceNow workflows (incident, change, problem management) in cloud-managed services contexts.

Knowledge of additional monitoring platforms such as ScienceLogic or similar enterprise observability tools.

Experience with database migration strategies and tools (Flyway, Liquibase) integrated into CI/CD for Azure SQL or Cosmos DB.

Background working in regulated or audit-focused industries (financial services, healthcare, insurance) with knowledge of evidence requirements for MFA enforcement, penetration testing, and environment parity.

Experience designing and reviewing Target Operating Models (TOM) for Managed Services onboarding and MSP readiness assessments.

Relevant certifications: Azure Solutions Architect Expert, Azure Administrator Associate, Azure DevOps Engineer Expert, or Security Engineer Associate.

Familiarity with Microsoft Cloud Adoption Framework (CAF) landing zone patterns and Well-Architected Framework review methodology.

Service Technician

Location: On site in Phoenix, AZ OR Las Vegas, NV

Work schedule: Full time, Monday - Friday, with flexibility to respond to urgent service needs as required.

Travel: Within assigned regional territory in AZ or NV with provided support for urgent or time sensitive service calls when necessary.

Are you a hands on technical professional who takes pride in precision, safety, and delivering exceptional service? A well established residential vertical transportation provider is expanding its field operations team and seeking a skilled Service Technician to support homeowners throughout Arizona and Nevada. This is an opportunity to join a company known for craftsmanship, long term customer relationships, and a strong investment in technician development. If you thrive in an independent field role where your expertise directly impacts safety and customer satisfaction, this could be your next career move.

The Service Technician plays a critical role in maintaining, troubleshooting, and repairing residential elevator systems. This position combines advanced diagnostics with customer interaction and mentorship responsibilities. You will serve as a technical leader in the field, ensuring systems operate safely and efficiently while helping develop the next generation of technicians.

Key Responsibilities

Service and Diagnostics

• Perform troubleshooting and repairs on motors, control systems, safeties, wiring, doors, gates, and related components.
• Complete preventative maintenance in accordance with manufacturer guidelines and applicable safety codes.
• Identify root causes of mechanical, electrical, hydraulic, and control related issues.
• Execute corrective repairs, adjustments, and part replacements to restore optimal system performance.
• Accurately document service findings, repairs completed, and recommended follow up actions.

Training and Mentorship

• Guide and mentor apprentices and junior technicians in troubleshooting techniques and safe work practices.
• Support skill development to prepare trainees for future lead technician responsibilities.
• Reinforce a culture of quality workmanship and professionalism in the field.

Safety and Compliance

• Adhere strictly to safety protocols, regulatory standards, and company policies.
• Identify hazards and proactively resolve safety concerns on job sites.
• Maintain compliance with national and local elevator codes and inspection standards.

Customer Interaction

• Communicate clearly and professionally with homeowners, builders, and internal teams.
• Explain technical findings and service recommendations in an easy to understand manner.
• Maintain clean, organized job sites that reflect a high standard of care.

Qualifications

• Minimum of 3 years or approximately 6000 hours of residential elevator installation or service experience.
• Strong diagnostic background in electrical, mechanical, hydraulic, and control systems.
• Ability to read and interpret wiring diagrams, schematics, and technical manuals.
• Proficiency with hand tools, power tools, and electrical testing equipment.
• High school diploma or GED required.
• Valid driver license with acceptable driving record.
• Ability to pass background screening and drug testing.
• Ability to lift up to 75 pounds and work in confined spaces, at heights, and on multi story job sites.

Preferred Experience

• Experience servicing residential elevator equipment from leading industry manufacturers.
• Demonstrated ability to train or mentor junior team members.
• Strong problem solving skills and calm decision making under pressure.
• High attention to detail and pride in craftsmanship.

Why Join This Team

• Competitive compensation and steady year round work.
• Opportunity to grow into senior or lead technical roles.
• Supportive leadership team that values safety, professionalism, and continuous improvement.
• Strong reputation in the residential market with a loyal customer base.

If you are ready to bring your technical expertise to a company that values precision, safety, and long term career growth, we would like to connect with you. Apply today to learn more about this confidential opportunity.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Mobile, Alabama — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $32.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1750 at 30 days and $1750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: First Shift 7:00 am – 3:30 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Dominique or text “Mobile MT3” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in related field preferred
  
  
• Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team
  
  
• Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Other Service Island support - SBTIII trained - SBT220 within 180 Days
  
  
• Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year
  
  
• Other Tire & Wheel safety - TW220 within 90 Days
  
  
• Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air qualified - (BA220&BA298) within 90 Days
  
  
• Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25)
  
  
• Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days
  
  
• Other A/C recycling/recovery certified - CF609 within 90 Days
  
  
• Other A/C qualified - (AC220&AC298) within 180 Days
  
  
• Other HD electrical trained - DR208 within 90 Days
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Act as a mentor for the Mobile Technician II level
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 3 days ago (3/16/2026 5:33 PM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City MOBILE

Location (Posting Location) : Postal Code 36618

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000127

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Description

Ready for more than just a job? Build a career with purpose. At Lactalis in the USA, we're committed to providing meaningful opportunities for our people to learn, grow, and thrive-whether you're just starting your journey with us or looking to take the next step in your career. From day one, we offer the tools and support to help you succeed.

As the world leader in dairy, Lactalis is a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Each day, we're proud to produce award-winning dairy products that bring people together.

In the US, we proudly offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with a growing family of ethnic favorites like Karoun, Gopi, and Arz.

At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We foster a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued.

Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us shape the future of dairy.

From your PASSION to ours

Lactalis USA, part of the Lactalis family of companies, is currently hiring a Sr. Process Project Manager based in Casa Grande, Arizona. As a Senior Yogurt Process Project Manager, the role will carry out responsibilities such as but not limited to leading and executing strategic capital investment and process improvement projects that enhance the design, performance, and reliability of our yogurt manufacturing operations. The role includes overseeing projects from concept through full implementation, ensuring alignment with corporate standards, plant operational needs, and product quality expectations. Responsibilities include driving process design, managing cross-functional project teams, supporting production and quality operations, and ensuring successful commissioning of new or upgraded yogurt processing systems. Additionally, the Senior Yogurt Process Project Manager will collaborate with other Lactalis USA Corporate team members, the Lactalis Group Corporate Engineering & Equipment Department, R&D, Quality, Finance, and Plant Engineering and Operations teams to align duties with the company's goals and values.

• Define project objectives, deliverables, and performance criteria to support strategic business goals within yogurt manufacturing and processing.
• Conduct site assessments and feasibility studies to evaluate technical constraints, operational impacts, and cost-benefit considerations.
• Partner with Key Stakeholders at Corporate and Plant level - including Production, Quality, Planning, R&D, Finance, Safety, Maintenance, and Engineering - to obtain buy-ins and to ensure that project designs meet business, operational, and regulatory expectations.
• Develop complete project packages including process flow diagrams, P&IDs, equipment layouts, scopes of work, cost estimates, timelines, ROI, and risk assessments required for capital project justification and submittal.
• Identify, evaluate, and prequalify suppliers, engineering firms, and equipment vendors aligned with corporate standards and yogurt processing technology requirements.
• Lead vendor negotiations to secure competitive quotations for capital assets, installation services, and engineering support.
• Prepare comparative analyses and recommendations for purchasing decisions and capital investment approvals.
• Lead end-to-end project management for yogurt process initiatives, from conceptual design through commissioning, ramp up, project closure, and handover.
• Maintain and distribute comprehensive Project Schedules, identify critical paths, implement mitigation initiatives, and propose acceleration plans to ensure all projects are completed in accordance with the timelines in the Savings Plans and ROI calculations.
• Coordinate and facilitate project review meetings, develop and distribute meeting minutes, and escalate issues or risks to key stakeholders as required.
• Attend Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning activities to ensure equipment performance aligns with specifications and project objectives.
• Oversee installation, startup, and optimization of yogurt processing systems, resolving technical issues and ensuring seamless integration with existing operations.
• Ensure all projects comply with corporate engineering standards, environmental regulations, food safety requirements, and applicable industry codes.
• Promote continuous improvement and standardization of yogurt processing technologies across the global manufacturing network.
• Travel to domestic and international manufacturing sites, vendor locations, and corporate offices as necessary to support project planning, execution, and commissioning.

Requirements

From your STORY to ours

Qualified applicants will contribute the following:

Education

• Bachelor's degree is required.
• A major in Food, Chemical, Mechanical, or Industrial Engineering is required.

Experience

• 8+ years working on Capital Expenditure, managing multi-million-dollar projects is required. Corporate or multi-site project management experience is preferred.
• 8+ years of experience in the Dairy, Beverage, or Liquid Food Manufacturing industry is required.
• 5+ years of experience in a USDA or FDA regulated industry is required

Certifications and specific knowledge

• The following certification is recommended for this role: Project Management Professional certification.
• Knowledge of Capital Project Management tools (Project Initiation, Stage-gate, Risk Management, Cost Tracking, FAT/SAT protocol Development and Execution, Project Closure) is required.
• Knowledge of Contract Management and Vendor Management are required.
• Knowledge of Food Safety & Regulatory requirements (Pasteurized Milk Ordinance, Sanitary Design, 3-A Standards, cGMP, Microbiological control) is required.
• Understanding of Dairy Process unit operations (Separation, Standardization, Pasteurization, Homogenization, Fermentation, etc.) is required.
• Knowledge of Mass & Energy Balances and Process Modeling is required.
• Knowledge of Tank and Piping design (including agitation, heat transfer, hygienic fittings, pumps, valves) is required.
• Understanding of Production Lines, OEEs, Capacity & Saturation calculations, and integration with upstream process equipment is an asset.
• Understanding of process Automation & Controls (PLC, Scada, MES, Batch and Recipe management) is a plus.
• Knowledge of MS Office applications, MS Project, and AutoCAD is required. Knowledge of Excel pivot tables and macros is preferred.

Work Conditions

• Travel is required up to 75% monthly.
• Extended hours may be necessary depending on the project needs
• To fulfill these responsibilities, tools such as a computer, phone or, and / or allowance(s) will be provided.
• Reasonable accommodations may be made to enable individuals with disabilities to perform these essential duties and responsibilities.
• This position requires physical presence in the office, in accordance with the guidelines of the Hybrid Work Policy.

At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career.

Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Further, any division of the Company that is an Affirmative Action Employer will comply with all related legal obligations

Description

Ready for more than just a job? Build a career with purpose.

At Lactalis in the USA, we're committed to providing meaningful opportunities for our people to learn, grow, and thrive-whether you're just starting your journey with us or looking to take the next step in your career. From day one, we offer the tools and support to help you succeed.

As the world leader in dairy, Lactalis is a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Each day, we're proud to produce award-winning dairy products that bring people together.

In the US, we proudly offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, President specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with a growing family of ethnic favorites like Karoun, Gopi, and Arz.

At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We foster a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued.

Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us shape the future of dairy.

From your PASSION to ours

Lactalis USA, part of the Lactalis family of companies, is currently hiring a Sr. Process Project Manager based in Londonderry, New Hampshire. As a Senior Process Project Manager, the role will carry out responsibilities such as but not limited to leading and executing strategic capital investment and process improvement projects that enhance the design, performance, and reliability of our yogurt manufacturing operations. The role includes overseeing projects from concept through full implementation, ensuring alignment with corporate standards, plant operational needs, and product quality expectations. Responsibilities include driving process design, managing cross-functional project teams, supporting production and quality operations, and ensuring successful commissioning of new or upgraded yogurt processing systems. Additionally, the Senior Yogurt Process Project Manager will collaborate with other Lactalis USA Corporate team members, the Lactalis Group Corporate Engineering & Equipment Department, R&D, Quality, Finance, and Plant Engineering and Operations teams to align duties with the company's goals and values.

• Define project objectives, deliverables, and performance criteria to support strategic business goals within yogurt manufacturing and processing.
• Conduct site assessments and feasibility studies to evaluate technical constraints, operational impacts, and cost-benefit considerations.
• Partner with Key Stakeholders at Corporate and Plant level - including Production, Quality, Planning, R&D, Finance, Safety, Maintenance, and Engineering - to obtain buy-ins and to ensure that project designs meet business, operational, and regulatory expectations.
• Develop complete project packages including process flow diagrams, P&IDs, equipment layouts, scopes of work, cost estimates, timelines, ROI, and risk assessments required for capital project justification and submittal.
• Identify, evaluate, and prequalify suppliers, engineering firms, and equipment vendors aligned with corporate standards and yogurt processing technology requirements.
• Lead vendor negotiations to secure competitive quotations for capital assets, installation services, and engineering support.
• Prepare comparative analyses and recommendations for purchasing decisions and capital investment approvals.
• Lead end-to-end project management for yogurt process initiatives, from conceptual design through commissioning, ramp up, project closure, and handover.
• Maintain and distribute comprehensive Project Schedules, identify critical paths, implement mitigation initiatives, and propose acceleration plans to ensure all projects are completed in accordance with the timelines in the Savings Plans and ROI calculations.
• Coordinate and facilitate project review meetings, develop and distribute meeting minutes, and escalate issues or risks to key stakeholders as required.
• Attend Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning activities to ensure equipment performance aligns with specifications and project objectives.
• Oversee installation, startup, and optimization of yogurt processing systems, resolving technical issues and ensuring seamless integration with existing operations.
• Ensure all projects comply with corporate engineering standards, environmental regulations, food safety requirements, and applicable industry codes.
• Promote continuous improvement and standardization of yogurt processing technologies across the global manufacturing network.
• Travel to domestic and international manufacturing sites, vendor locations, and corporate offices as necessary to support project planning, execution, and commissioning.

Requirements

From your STORY to ours

Qualified applicants will contribute the following:

Education

• Bachelor's degree is required.
• A major in Food, Chemical, Mechanical, or Industrial Engineering is required.

Experience

• 8+ years working on Capital Expenditure, managing multi-million-dollar projects is required. Corporate or multi-site project management experience is preferred.
• 8+ years of experience in the Dairy, Beverage, or Liquid Food Manufacturing industry is required.
• 5+ years of experience in a USDA or FDA regulated industry is required

Certifications and specific knowledge

• The following certification is recommended for this role: Project Management Professional certification.
• Knowledge of Capital Project Management tools (Project Initiation, Stage-gate, Risk Management, Cost Tracking, FAT/SAT protocol Development and Execution, Project Closure) is required.
• Knowledge of Contract Management and Vendor Management are required.
• Knowledge of Food Safety & Regulatory requirements (Pasteurized Milk Ordinance, Sanitary Design, 3-A Standards, cGMP, Microbiological control) is required.
• Understanding of Dairy Process unit operations (Separation, Standardization, Pasteurization, Homogenization, Fermentation, etc.) is required.
• Knowledge of Mass & Energy Balances and Process Modeling is required.
• Knowledge of Tank and Piping design (including agitation, heat transfer, hygienic fittings, pumps, valves) is required.
• Understanding of Production Lines, OEEs, Capacity & Saturation calculations, and integration with upstream process equipment is an asset.
• Understanding of process Automation & Controls (PLC, Scada, MES, Batch and Recipe management) is a plus.
• Knowledge of MS Office applications, MS Project, and AutoCAD is required. Knowledge of Excel pivot tables and macros is preferred.

Work Conditions

• Travel is required up to 75% monthly.
• Extended hours may be necessary depending on the project needs
• To fulfill these responsibilities, tools such as a computer, phone or, and / or allowance(s) will be provided.
• Reasonable accommodations may be made to enable individuals with disabilities to perform these essential duties and responsibilities.
• This position requires physical presence in the office, in accordance with the guidelines of the Hybrid Work Policy.

At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career.

Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Further, any division of the Company that is an Affirmative Action Employer will comply with all related legal obligations.

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Roseville, Michigan — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $32.74 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $750 at 30 days and $750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 3:00 pm – 11:30 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in vehicle maintenance and repair services preferred
  
  
• Must have or meet federal PM certification requirements through any combination of classroom training or work experience totaling 1 year
  
  
• One (1) year or more mechanical experience working offsite at customer locations preferred
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team. Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment. Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air (BA220&BA298) within 90 Days
  
  
• Other Brake mechanics/inspectors FMCS 396.25
  
  
• Other Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Other Tire & Wheel TW220 within 90 Days
  
  
• Other CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• Other Battery Charge and Check, Warranty
  
  
• Other HD electrical - DR208 within 90 Days
  
  
• Other Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Other OEM on-line engine courses (minimum 2)
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc…; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 month ago (2/19/2026 10:21 AM)

Requisition ID 2

Location (Posting Location) : State/Province MI

Location (Posting Location) : City ROSEVILLE

Location (Posting Location) : Postal Code 48066

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000740

Min Pay USD $32.74/Hr.

Max Pay USD $32.74/Hr.

FUNCTIONAL PURPOSE:

Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems.

DUTIES AND RESPONSIBILITIES:

• Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems.
• Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance.
• Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action.
• Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance.
• Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration.
• Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment.
• Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees.
• Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision.
• May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties.
• Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives.
• Performs other duties as assigned.

REQUIREMENTS:

• Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings.

• Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers.

• Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.).

• Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc.

• Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques.

• Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes.

• Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages.

• Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment.

• Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error.

• Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data.

• Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available.

• Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas.

• Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics).

• Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets.

• Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents).

• Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect.

• Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately.

• Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms.

• Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws.

• Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment.

EXAMINATION REQUIREMENTS:

Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities.

In addition, applicants must successfully complete a structured interview evaluation.

ADDITIONAL PROVISIONS:

1. Applicants must be able to operate powered industrial equipment.

2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.