Framework Desktop Mainboard Dimensions Jobs in Usa

POSITION SUMMARY: The primary function of the Production Machinist is to operate production machines under the guidance and direction of the Set-Up Technician while diligently monitoring product quality.

DUTIES AND RESPONSIBILITIES (essential functions of position):

Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. For assigned area and products:

• Power up machines and zero return axis to the home position.
• Follow prescribed quality procedures, identify all dimensions established at the machining operation, and check established dimensions using the in-process inspection sheet.
• Make offsets to tools or work positions to achieve dimensionally acceptable products.
• Understand surface finish requirements and change tools as needed to maintain the finish.
• Utilize shop travelers in production to verify correct material, size, quantity, and any additional notes or work instructions that differ from the customer print.
• Execute start-up procedures following machine crashes or major tool breakages.
• Support workplace organization efforts, including removing and storing fixtures, vices, and stops after jobs, replacing tooling and small tools in designated areas, and cleaning machines.
• Follow procedures for time reporting and scrap reporting via data collection to provide accurate job costing data.
• Adhere to prescribed safety procedures.

ESSENTIAL EDUCATION, SKILLS, EXPERIENCE AND QUALIFICATIONS:

• Education: High School diploma or equivalent.

NONESSENTIAL SKILLS, EXPERIENCE AND QUALIFICATIONS (not necessary but preferred):

• Previous machining.
• Blueprint reading.
• Understanding and application of GD&T.

PHYSICAL DEMANDS AND WORK CONDITIONS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Must be able to work in a manufacturing environment.
• Eyesight and hearing must be correctable to standard level.
• Ability to lift a minimum of 25 lbs and up to 50 lbs on a daily basis.
• Ability to stand for a minimum of 8 hours and up to 12 hours per day.

• Read, Write, and understands English.
• Read mechanical blueprints and interpret technical documents.
• Write legible documentation conforming to prescribed style and format.
• Communicates effectively.
  
  

Company Overview:

Separators is North America’s leading independent provider specializing in the service, repair, and remanufacturing of Alfa Laval, Tetra Pak and Westfalia centrifuge equipment. We have various offerings, from service and parts to automation technology and consulting, but above all else, Separators is a service company.

• 
  We serve the needs of our customers and focus on keeping their facilities and their equipment running at optimal levels
• .We serve our employees by providing the resources and support they need to not only complete their job but to be successful in their work

.
Throughout Separators there is a commitment to teamwork, which does not always mean working together, but it does mean working in the same direction. As we continue to grow as a company and work with more client, we’re on the lookout for individuals to join our team to support the Indianapolis, IN service locatio

n.
Job Summa

ry:Manual Machinist II is responsible for fabrication, repair and remanufacturing of parts, tools and components of the industrial centrifuge products serviced by the company. This position utilizes industrial machine equipment such as lathes, milling machines, presses and grinders to produce and repair precise and high-quality components for the shop, service and parts teams. They do this by applying their knowledge of mechanics, mathematics, metal properties and machining procedu

res
The Separators

• Way:Passionate about the success of our customers and our busin
• ess.Empowered with high expectations to deliver consistent excellence to our customers, remembering that our customers are both external and inter
• nal.Committed to “rowing the same direction”, working as a team first to deliver consistent results as individu
• als.A willingness to consistently work hard, tenacious enough to overcome obstacles and a curiosity to solve problems to make the business better. Willing to fail and try again. Be gri
• tty.Processes and tools that assist the team by providing the guidance and information needed to positively impact the busin
• ess.Doing everything the “right way” by adhering to our core values of Customer Service, Continuous Improvement, Mutual Respect, Integrity, and Tr

ust.
Job Responsibili

• ties:Always keep safety of self and others as the highest prio
• rity.Measure, examine, and test completed units to detect defects and ensure conformance to specifica
• tionsCalculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier cali
• pers.Align and secure fixtures, cutting tools, accessories and materials onto the mac
• hinesMachine parts to specifications using machine tools such as lathes, milling machines, drill press, or grin
• ders.Study sample parts, blueprints, and engineering information to determine best methods and sequence of operat
• ions.Consult with other members of the shop team and management on best ways to fabricate, repair or modify compon
• ents.Act as a consultant to the engineering team on manufacturing methodology related to the design and fabrication of parts and compon
• ents.Examine parts for defects and repair where poss
• ible.Layout, measure and mark metal stock to proper lengths and tolera
• nces.Design fixtures, tooling and procedures to fabricate, modify or repair compo
• nentsPerform general maintenance on the equipment including lubricating, cleaning, and replacing consumable compon
• ents.Listen to and observe equipment for signs of machine malfunction and to determine if maintenance is ne
• eded.Exchange technical information both verbally and in writing with various members of the organization including engineering, customer service, sales and manage
• ment.Support continuous improvement efforts by evaluating procedures, recommending changes or modifications for improved efficiency and participating in lesson learned activi
• ties.Track time working on job orders by logging onto job in Shop Floor Man
• ager.Maintain a clean, organized and safe work environ
• ment.Safely operate cranes, forklift and other industrial equip
• ment.Support, mentor and train Manual Machinist I’s and other shop personnel on the methods and procedures to fabricate, repair and modify compon
• ents.Represent Separators in alignment with the Separators
• Way.Other duties as assi
• gned.Always represent Separators Inc. in a professional and courteous ma

nner.
Requirements & Qualifica

• tions:High school diploma or equivalent; Vocational school or apprenticeship pref
• erred.3 to 5 years of previous work experience as a manual mach
• inist.Knowledge of metal properties and other mat
• erial.Outstanding mathematical skills necessary to perform the arithmetic functions such as add, subtract, multiply and divide all units of measure necessary to calculate dimensions and toler
• ances.Strong mechanical apt
• itude.Ability to use precision tools (e.g. calipers) to take accurate measure
• ments.Demonstrated time management and prioritization skills with multitasking ab
• ility.Thorough understanding of specifications, blueprints, manuals and mechanical dra
• wings.Great verbal and written communication s
• kills.Utilize complex problem-solving techniques and critical thinking in support of assign
• ments.Self-Starter, Ability to work independently under general superv
• ision.Ability to perform tasks that require manual dexterity and physical endurance, such as standing, walking, bending, and lifting up to 50 pounds regularly and for extended pe
• riods.Previous experience with remanufacturing proc
• esses.Basic skills in MS Office Suite (Word, Excel, SharePoint, TEAMS, etc.), pref

erred.
J

• ob TypeFull Time; Non-Exempt (

Hourly)

• BenefitsHealth Insurance with Health Savings Account (if e
• ligible)Dental/Vision I
• nsuranceLife/Disability I
• nsurance401(k) with employ
• er matchPaid Vacation/S
• ick TimePaid
• HolidaysEmployee Assistance
• ProgramWellness

CMM Programmer

Springdale, OH

Onsite

Full Time

Responsibilities:

The Process Engineer will be responsible for programming Coordinate Measuring Machines (CMM) to support the manufacturing efforts. The CMM programming will be done using PC DMIS software. The role will include writing, editing, troubleshooting, and validating CMM programs to be used for measurement of jet engine components. The Process Engineer develops, enhances, and troubleshoots CMM programs for dimensional inspection of manufactured aerospace products. The Process Engineer must be able to read and interpret drawings and prints using Geometric Dimensioning and Tolerancing (GD&T) principals.

Duties and Responsibilities:

• Develop CMM programs using PC DMIS software, an advanced level of PC DMIS offline programming is expected.
• Read and understand prints/drawings and have an advanced knowledge of GD&T.
• Develop planning, processes, and work instructions
• Troubleshoot & prove-out CMM/ PC DMIS programs, direct GR&R validations, and validate work using multiple techniques
• Develop CAD based CMM inspection programs using both models and prints
• Work autonomously as well as collaboratively in identifying needs and validation plans. Providing proactive support to meet manufacturing requirements
• Follow system standards to development, implementation, and change management of metrology processes

Qualifications / Requirements:

• US citizenship required
• Approximately 20% travel time
• Advanced knowledge/experience programming CMM’s using PC DMIS software with scanning, offline programming, and complex geometry.
• Advanced knowledge/experience programming CMM’s using PC DMIS software with an emphasis on precision, repeatability and reproducibility
• Strong experience using, programming, troubleshooting, and editing PC DMIS programs.
• Experience using 5-axis REVO probe systems.
• Strong knowledge of GD&T and how to apply GD&T to inspection routines to satisfy print dimensions
• Strong mathematical, analytical, writing, and communication skills
• Knowledge and experience with CAD-based inspection using PC DMIS
• Strong collaboration & presentation skills to gain buy-in & effectively communicate program/process implementations and changes to the organization

Desired Characteristics:

• Programming or scripting experience (C++, C Sharp, Python, etc.)
• Self-starter – quick learner & able to identify alternative solutions for optimum results
• Experience in application of structured problem solving in continuous improvement

CNC Operators

Location: 01757 Milford, MA (no remote)

Job Summary:

Our client is a global leader in analytical laboratory technologies and solutions, seeking highly motivated CNC experience talent to join our dynamic team. This is an exciting opportunity to contribute and be part of an organization passionate to delivery best-in-class products and services. We are representing a global enterprise currently undergoing significant evolution and growth. We are seeking a strategic Global HR Project Manager to lead high-impact initiatives, specifically focusing on Mergers & Acquisitions (M&A) and large-scale organizational transformations.

Overview:

Our client is currently looking to hire a CNC Machinist to join our organization within our Global Machining Operations.

We are hiring individuals to join a large team of professionals who work within our world-class 50,000 square-foot Machining/Manufacturing facility. This facility includes over 90+ start of the art CNC machines and technologies. We are looking for a highly skilled and motivated machinist to work in our exciting, fast paced work environment utilizing a variety of CNC lathe and CNC Milling technologies to produce machined components for our biotechnology products.

Seeking Entry-Level (1–2 Years), Mid-Level (3–5 Years), and High-Level (5+ Years).

Multiple shifts available:

Shift Schedule: Wed/Thurs/Fri 7:30pm to 8:00am. This position requires set-up and operation abilities of more than one multi-axis machine such as Citizen Swiss (A20, L20, M20), Nakamura-Tome (WT-100, WT-150, WT-250), Okuma or Mori-Seiki. Inspection of own and other associates’ parts, computer skills, ability to read and edit programs and make sound decisions when presented with issues is required. Excellent communication skills are paramount as working on multiple machines with associates is a required function.

Shift Schedule: Wed/Thurs/Fri 7:30pm to 8:00am. The position requires set-up and operation abilities of more than one multi-axis machine such as Nakamura-Tome (WT-100, WT-150, WT-250), Okuma or Mori-Seiki. Inspection of own and other associates’ parts, computer skills, ability to read and edit programs and make sound decisions when presented with issues is required. Excellent communication skills are paramount as working on multiple machines with associates is a required function.

This opening is an second shift position for Monday - Thursday 3:00pm till 1:00am. The position requires set-up and operation abilities of more than one multi-axis machine such as Mori NLX lathe, Kitamura milling machines, Robodrills, and Agie Charmilles EDM machines. Inspection of own and other associates’ parts, computer skills, ability to read and edit programs and make sound decisions when presented with issues is required. Excellent communication skills are paramount as working on multiple machines with associates is a required function.

Responsibilities:

• Follow written process and operate a variety of CNC machines with limited supervisor
• Set-up and operate CNC equipment and perform any other functions within the department that may be necessary.
• Inspect first piece and in process material utilizing visual and hand inspection equipment, which include: Vernier calipers, Micrometer and drop dial indicators as well as profilometer and CMM operations.
• Interact in a Manufacturing environment with a variety of personnel and shift change daily, as well as sharing a machining center with another associate.
• Performing all basic set-ups and all machining functions associated with the machinery in the Valve Cell Department
• Performing bench type operations which include polishing, and other operations of the more complicated nature.
• Operator will be responsible for reading blueprints and verifying with measuring instruments (micrometers, verniers, etc.) the dimensions of the produced part to the blueprint

Qualifications:

Education:

• Vocational trades school, high school diploma or equivalent required.
• Formal trades or apprenticeship preferred.

Experience:

• All training will be developed and implemented based upon the candidate’s experience level.

Skills:

• Must be able to read complex engineering drawings, perform shop math and keep accurate records.
• Performing all basic set-ups and all machining functions associated with the machinery in the Valve Cell Department
• Performing bench type operations which include polishing, and other operations of the more complicated nature.
• Operator will be responsible for reading blueprints and verifying with measuring instruments (micrometers, verniers, etc.) the dimensions of the produced part to the blueprint.

Must be legally authorized to work in the United States without requiring sponsorship for employment visa status (e.g., H-1B). This position does not offer visa sponsorship.

Benefits including Medical, Dental, Vision available while contracting with HW Staffing Solutions.

Full-time opportunity

Pay range depending on experience

$23.00 – $40.00 per hour

Differential Pay Not Included

Overview:

Establishes, manages, reviews and maintains production schedules for assigned work center to ensure that the master production schedule is being executed. Analyze work center loads for effective capacity planning, and also ensure accurate inventories by effectively addressing any labor reporting issues. Manage the production meetings and handle inquiries from the sales team. Maintains and reviews shop dispatch list, ensuring completion of manufacturing to meet customer shipping requirements. Answer related inquiries for all levels of the organization. Manage local 3rd party manufacturing suppliers including coordinating and arranging for outsourced work required to complete work requirements. Update and maintain the bills of materials and work requirements within our ERP system. This position has a close working relationship with Sales and Engineering. Guidance may be provided on possible sources of information and methods to complete tasks. Able to meet deadlines and exercise judgment regarding related items.

Core Responsibilities:

• Daily analysis, planning, and review of work center capacity based on requirements loaded by Sales and Master Scheduler.
• Maintain and review dispatch lists targeting customer promise delivery dates.
• Effective sequencing of jobs, processes and assignments to the production floor and interface with shop floor supervisor.
• Communicate with customer service on status of sales orders and estimated completion. Ensure information needed for labeling of finished goods is accurate and correct
• Participate in production meetings and monitor any potential production issues or needs.
• Implement material substitutions as needed, coordinating these with purchasing to ensure inventory accuracy.
• Audit of inventory data as compared to packing slips from material receipts. Corrective action implementation based on issues found.
• Maintain effective communications with internal customers regarding inventory accuracy, engineering changes and shop order closeouts.
• Maintain current knowledge for this position and within the work area through continuing education, subscriptions, certifications, and memberships.
• Participate in related staff, team and/or task group meetings to ensure the continuous improvement of processes, methods, productivity and quality, while reducing costs. Participate in in-house training programs.
• Ensure that all operations are within established guidelines and conform to health and safety standards.
• Conduct a continuous study of internal processed and methods, research new technology and develop proposals for application of such technology for the purposes of cost reduction and process improvement.
• Other duties as assigned or required.

Qualifications:

• Associate Degree with 4-7 years of progressively responsible, directly related experience; or a combination of education and experience equivalent to these. Accuracy is essential to this position.
• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability (including physical) required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Must possess the ability to read, analyze and interpret business and technical documents, flow charts, budget information, procedure manuals and so on; the ability to prepare required routine reports and correspondence; ability to communicate effectively with others, using skill and diplomacy and have the ability to work with all levels of the organization.
• Requires the ability to work within established health, safety and quality guidelines and the ability to organize the workload and meet deadlines.
• Must possess knowledge and experience in automated systems and terminology and the ability to develop and interpret related reports using spreadsheet, word processing and graphics software. Requires the ability to operate a variety of standard business machines, such as a computer and keyboard, a calculator, telephone, FAX, photocopier and so on.
• Must possess the ability to add, subtract, multiply and divide, using whole numbers/decimals and the ability to apply concepts of business math to practical situations and dimensions to production.
• Must possess the ability to apply common sense understanding to carry out detailed instructions furnished in written, oral or diagram format. Must possess strong knowledge, understanding and experience in various problem-solving and participatory management techniques.
• Requires the ability to operate a variety of standard business machines, such as a computer and keyboard, a calculator, telephone, FAX, photocopier and so on.
• Must possess the ability to add, subtract, multiply and divide, using whole numbers/decimals and the ability to apply concepts of business math to practical situations and dimensions to production.
• Must possess the ability to apply common sense understanding to carry out detailed instructions furnished in written, oral or diagram format. Must possess strong knowledge, understanding and experience in various problem-solving and participatory management techniques.

We are an Equal Opportunity Employer and make employment decisions without regard to race, color, religion, sex, pregnancy, national origin, age, disability, genetic information, military or veteran status, sexual orientation, gender identity, marital status, or any other status protected by applicable federal, state, or local law.

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

What You Will Do

• Performs the set up and prove-in of complex precision production hardware and potential pre-production engineering hardware with the UPMF (Ultra Precision Machine Fabrication).
• Produce products out of materials ranging from standard to exotic utilizing all types of CNC (computer numerically controlled) and conventional machines.
• Determines the functional adequacy and efficiency of machines and tooling to fabricate parts to defined specifications.
• Troubleshoots programs, tooling, and machines.
• Applies a comprehensive knowledge of GD&T (Geometric Dimensioning & Tolerancing) and the applicable use of SIE (Standard Inspection Equipment) to maintain integrity of conformance to part tolerances during fabrication.
• Provide necessary show floor assistance to the Production Machine Operators in maintaining machine operational efficiencies.

Qualifications You Must Have

• Minimum of three (3) years performing the set up and operation of CNC machinery.
• Experience operating a variety of CNC machinery, both mills and lathes performing production setups and troubleshooting.
• Experience with Geometric Dimensioning and Tolerancing and its application to blueprint reading.
• Must have experience using inspection equipment to include ID/OD micrometers, dial calipers, indicators, mobile inspection station, thread gauges, plug gauges, air gauges, and optical comparator.
• Must pass qualifying and/or practical test.
• High School Diploma or Equivalency (GED).
• Must be able to work any designated shift to include overnight.
• The ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation.

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Union Specific Information: This position is part of a collective bargaining agreement. Wage and workplace conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

JOB PROFILE: REVIT DRAFTER – MODULAR CONSTRUCTION  

The Modular Revit Drafter converts architectural and engineering design drawings into LOD 400 production drawings used directly by our factory production team. This role supports the Modular Design Manager and ensures that modular building units are detailed accurately and efficiently for construction. This is a production drafting role in a high-output modular manufacturing environment. 

WHAT YOU HAVE ALREADY ACHIEVED (Minimum Requirements): 

• Entry Level: Experience with Autodesk Revit or similar BIM software (0-2 years) 
• Entry Level: Drafting support role (experience in any 3D or 2D drawing software) 
• Advanced Level: 2-4 years experience with Autodesk Revit 
• Advanced Level: Independently produced production drawing sets (architectural or structural or MEP) 
• Working knowledge of Revit modeling workflows including views, sheets, and annotation standards 
• Ability to manage multiple drawing updates and revisions in a fast-paced production environment 
• Ability to read and interpret architectural and engineering drawings with an understanding of construction documentation, residential or light commercial framing, and common building assemblies 
• Strong attention to detail and the ability to produce clear, organized construction drawings including dimensions, notes, and schedules 
• Ability to create framing takeoffs from structural and architectural drawings for single family homes 

WHAT SETS YOU APART (Preferred Requirements): 

• Familiarity with modular or prefabricated construction methods. 
• Hands-on construction experience, such as framing, electrical, carpentry, or similar trades (1–2 years preferred) 
• Ability to independently review and interpret residential or commercial building codes 

WHAT YOU ARE GREAT AT (Day-to-Day Responsibilities): 

• Work in a detail-oriented and systematic manner 
• Communicate clearly and professionally via phone and written (email, teams, plans, etc.) with internal and external team 
• Produce detailed shop drawings for modular building units, including wall, floor, and roof framing 
• Prepare production-ready drawings including dimensions, notes, material schedules, and construction details 
• Organize plan sets into individual sheets based on singular mods to be used by the factory production team 
• Create and maintain accurate models in Revit 
• Maintain drawing standards and organization within project models 
• Work closely with the Modular Design Manager to coordinate structural, architectural, and MEP systems within a model 
• Identify potential constructability issues and assist in resolving conflicts before plans are released to production 
• Implement design revisions based on RFIs, production feedback, and design updates 
• Maintain and update drawing sets throughout the project lifecycle 
• Contribute ideas to improve drafting standards and modular workflows 
• Communicate effectively with production staff to clarify drawing information and resolve issues 

YOU THRIVE ON: 

MAKING AN IMPACT. Your work directly shapes communities by delivering high-quality, factory-built housing to developers and homeowners. Whether it’s the families who move into our finished homes, the builders who trust us with their projects, or the internal and external teams that bring it all together – you play a key role in making it happen. 

OVERCOMING CHALLENGES. You see roadblocks as opportunities and proactively find solutions. 

GROWTH & INNOVATION. We’re scaling fast – doubling our manufacturing capacity every six months and working toward opening a 200,000-sf factory that will employ 250 people and build 1,000 housing units per year. If you love being part of a team that’s building something bigger than themselves, this is the place for you. 

WHO WE ARE: 

OUR PURPOSE. To empower people in and impacted by the construction industry to create quality homes, strong communities, and healthy families. 

HOW WE WORK. On time, on-budget delivery – We promise to deliver your modular construction projects on time and within budget, reducing risks and ensuring a faster path to revenue. 

TRANSPARENT COMMUNICATION AT EVERY STEP. From design to delivery, we provide honest, clear, and consistent updates ensuring clients are informed and confident throughout the process. 

CONSISTENT & RELIABLE QUALITY STANDARDS. Our weatherproof, factory-built modules ensure consistent quality and durability, minimizing the risks of traditional construction such as weather and inconsistent workforce.  

A TRUE PARTNERSHIP FOCUSED ON PARTNER SUCCESS. We treat your project as our own, collaborating closely to meet your goals and celebrating milestones like setting day with our clients. 

OUR CORE VALUES: 

POSITIVE ATTITUDE. Action-oriented instead of complaining and proposing solutions instead of expressing pessimism or distrust. Bringing fun to the workplace. 

CLARITY & COMPASSION. Direct and straight forward communication while seeing others as a valuable human being that deserves empathy. 

FOCUS. Approaching work in a systematic way, creating structures that empower others, making sober and data-driven decisions.  

BUILD LIKE IT’S YOUR OWN. Working with purpose and serving our clients with excellence as if you would build the project for yourself. Mediocrity is not an option.  

ALWAYS TEACHING, ALWAYS LEARNING. Committed to consistent growth and generous knowledge sharing.  

SEE THE BEST, BE THE BEST. Seeing the best in every person you engage with (team members, clients, business partners). Believing in others and encouraging them daily.  

SCHEDULE: 

• Full-time in office: Monday through Friday, 8:00 AM – 4:30 PM.  

COMPENSATION AND CAREER GROWTH:

• $60,000 – $90,000 annually depending on experience. 
• Senior BIM designer positions available. Please reach out to our team to learn more. 

BENEFITS AND PERKS (available after 90 days introductory period): 

• 80 hours vacation (accrued annually) 
• 40 hours sick pay per year 
• 5 paid holidays (New Year’s Day, July 4th, Thanksgiving Day, Christmas Eve, Christmas Day) 
• Employer-subsidized medical insurance (health, dental, vision) 
• Employer-paid Life Insurance 
• 401(k) with up to 3.5% corporate match 
• Exclusive employee swag 
• Semiannual All-Team gatherings 

DISCLAIMERS: 

• All job applications shall remain open and valid for a period of 90 days. 
• If you intentionally falsify your application, the Company may terminate the employee. 

Granite delivers advanced communications and technology solutions to businesses and government agencies throughout the United States and Canada. We provide exceptional customized service with an emphasis on reliability and outstanding customer support and our customers include over 85 of the Fortune 100. Granite has over $1.85 Billion in revenue with more than 2,100 employees and is headquartered in Quincy, MA. Our mission is to be the leading telecommunications company wherever we offer services as well as provide an environment where the value of each individual is recognized and where each person has the opportunity to further their growth and achieve success.

Granite has been recognized by the Boston Business Journal as one of the "Healthiest Companies" in Massachusetts for the past 15 consecutive years.

Our offices have onsite fully equipped state of the art gyms for employees at zero cost.

Granite's philanthropy is unparalleled with over $300 million in donations to organizations such as Dana Farber Cancer Institute, The ALS Foundation and the Alzheimer's Association to name a few.

We have been consistently rated a "Fastest Growing Company" by Inc. Magazine.

Granite was named to Forbes List of America's Best Employers 2022, 2023 and 2024.

Granite was recently named One of Forbes Best Employers for Diversity.

Our company's insurance package includes health, dental, vision, life, disability coverage, 401K retirement with company match, childcare benefits, tuition assistance, and more.

If you are a highly motivated individual who wants to grow your career with a fast paced and progressive company, Granite has countless opportunities for you.

EOE/M/F/Vets/Disabled

Job Description

We are seeking a highly skilled and experienced Lead AI Engineer to join our dynamic team. The ideal candidate will excel at identifying and articulating complex business problems, and will develop innovative, scalable, and robust AI/ML solutions to address these challenges. Responsibilities will include designing, building, and deploying enterprise-grade AI systems, specifically focused on:

• 
  
• Agentic AI solutions to automate operational processes (e.g., interpreting trouble tickets, performing basic troubleshooting, interacting with online portals, data entry).
  
• Retrieval-Augmented Generation (RAG) and ColBERTv2 pipelines for parsing, indexing, and querying enterprise documents to facilitate answers related to process guidelines, product knowledge, and training materials.
  
• Function calling solutions leveraging Large Language Models (LLMs) to automate and perform precise actions in enterprise workflows.
  
• Developing and applying reinforcement learning strategies to optimize and automate decision-making processes within enterprise operations.
  

This role requires hands-on expertise with model fine-tuning, training pipelines, post-training optimization techniques (e.g., model distillation), classification models, and integrating AI systems within complex enterprise environments.

Duties and Responsibilities

• 
  
• Develop and implement AI solutions leveraging fine-tuned Large Language Models (e.g., OpenAI models, LLaMA, Mistral).
  
• Design, develop, and optimize Retrieval-Augmented Generation (RAG) pipelines using advanced vector databases (e.g., FAISS, Pinecone, Milvus).
  
• Build and enhance agentic AI systems utilizing frameworks like LangChain, AutoGPT, or similar automation frameworks.
  
• Deploy scalable ColBERTv2 architectures for semantic retrieval and classification.
  
• Create robust pre-processing and post-processing pipelines to enhance model performance, accuracy, and interpretability.
  
• Collaborate closely with cross-functional teams, including product managers, business stakeholders, data scientists, and software engineers.
  
• Implement best practices in model distillation, quantization, and optimization for deployment in production environments.
  
• Ensure compliance with enterprise-grade security, privacy standards, and data governance practices.
  
• Provide leadership and mentorship to team members, supporting their technical development and career growth through coaching, training, and performance feedback.
  
• Drive timely and successful completion of AI/ML projects by setting clear milestones, tracking progress, removing blockers, and aligning resources
  

Required Qualifications

• 
  
• Bachelor's degree in Computer Science, Data Science, Machine Learning, AI, or related fields; advanced degree strongly preferred.
  
• 5+ years of proven experience developing and deploying production-grade AI/ML systems.
  
• Strong programming skills in Python, familiarity with libraries/frameworks such as PyTorch, TensorFlow, Hugging Face, and LangChain.
  
• Demonstrated expertise with LLM fine-tuning (e.g., LoRA, PEFT), distillation, and model optimization.
  
• Practical experience implementing RAG pipelines with embedding technologies and vector stores (e.g., FAISS, Pinecone).
  
• Proven track record building agentic AI systems capable of interacting with multiple enterprise applications and platforms.
  
• Solid understanding of NLP techniques, Transformer architectures, semantic search, and document retrieval technologies (e.g., ColBERT).
  
• Hands-on experience with reinforcement learning techniques, including designing, training, and deploying reinforcement learning models.
  

Preferred Qualifications:

• 
  
• Master's or Ph.D. in Computer Science, Machine Learning, Artificial Intelligence, or related field.
  
• Familiarity with cloud-based AI services (e.g., AWS SageMaker, Azure ML, Google Vertex AI).
  
• Experience with containerization (Docker, Kubernetes) and deployment pipelines (CI/CD).
  
• Knowledge of advanced AI frameworks and model inference engines such as Triton Inference Server, TensorRT, and ONNX.
  
• Familiarity with model monitoring, observability tools, and techniques to ensure long-term reliability and performance.
  
• Strong communication and interpersonal skills with the ability to clearly articulate complex technical solutions to non-technical stakeholders.
  
• Experience in regulated industries or environments requiring strict compliance and data governance standards.