Frame Jobs in Usa
1,716 positions found — Page 68
Staff Nurse II - Empowering patient independence through advanced dialysis care. (HONDO)
Salary not disclosed
POSITION SUMMARY/RESPONSIBILITIES
Trains patients and care partners on self-care home hemodialysis (HHD) or peritoneal dialysis (PD) techniques, equipment use, infection control, and emergency procedures. Home Dialysis nurses will also conduct home visits to assess the environment and ensure safety and compliance. Home Dialysis nurses will also be required to take on call responsibilities for patient and care partner support during and after office hours, and on holidays. Performs the nursing process in a safe therapeutic manner in a designated clinical setting. Provides direct patient care (HHD/CAPD/CCPD) and monitoring of renal dialysis patients. Coordinates home dialysis activities within the frame work of the Federal Regulations, State and Local End Stage Renal Disease Network. Supports and adheres to University Health and department specific policies and standards. Receives mentoring from the Patient Care Coordinator and Director of Dialysis Services.
EDUCATION/EXPERIENCE
Registered nurse who has at least 2 years of experience as an RN, and six months experience in the specific home dialysis modality. BSN is highly preferred. Must meet career ladder Staff Nurse II criteria for specialty area worked. National Certification in Dialysis is preferred. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card.
LICENSURE/CERTIFICATION
Must be a Registered Nurse currently licensed in the state of Texas.
Trains patients and care partners on self-care home hemodialysis (HHD) or peritoneal dialysis (PD) techniques, equipment use, infection control, and emergency procedures. Home Dialysis nurses will also conduct home visits to assess the environment and ensure safety and compliance. Home Dialysis nurses will also be required to take on call responsibilities for patient and care partner support during and after office hours, and on holidays. Performs the nursing process in a safe therapeutic manner in a designated clinical setting. Provides direct patient care (HHD/CAPD/CCPD) and monitoring of renal dialysis patients. Coordinates home dialysis activities within the frame work of the Federal Regulations, State and Local End Stage Renal Disease Network. Supports and adheres to University Health and department specific policies and standards. Receives mentoring from the Patient Care Coordinator and Director of Dialysis Services.
EDUCATION/EXPERIENCE
Registered nurse who has at least 2 years of experience as an RN, and six months experience in the specific home dialysis modality. BSN is highly preferred. Must meet career ladder Staff Nurse II criteria for specialty area worked. National Certification in Dialysis is preferred. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card.
LICENSURE/CERTIFICATION
Must be a Registered Nurse currently licensed in the state of Texas.
permanent
Lead Mechanical Design Engineer – Data Center Solutions (WASHINGTON)
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
temporary
Renal Dialysis Home Care Specialist (HONDO)
🏢 University Health
Salary not disclosed
POSITION SUMMARY/RESPONSIBILITIES
Trains patients and care partners on self-care home hemodialysis (HHD) or peritoneal dialysis (PD) techniques, equipment use, infection control, and emergency procedures. Home Dialysis nurses will also conduct home visits to assess the environment and ensure safety and compliance. Home Dialysis nurses will also be required to take on call responsibilities for patient and care partner support during and after office hours, and on holidays. Performs the nursing process in a safe therapeutic manner in a designated clinical setting. Provides direct patient care (HHD/CAPD/CCPD) and monitoring of renal dialysis patients. Coordinates home dialysis activities within the frame work of the Federal Regulations, State and Local End Stage Renal Disease Network. Supports and adheres to University Health and department specific policies and standards. Receives mentoring from the Patient Care Coordinator and Director of Dialysis Services.
EDUCATION/EXPERIENCE
Registered nurse who has at least 2 years of experience as an RN, and six months experience in the specific home dialysis modality. BSN is highly preferred. Must meet career ladder Staff Nurse II criteria for specialty area worked. National Certification in Dialysis is preferred. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card.
LICENSURE/CERTIFICATION
Must be a Registered Nurse currently licensed in the state of Texas.
Trains patients and care partners on self-care home hemodialysis (HHD) or peritoneal dialysis (PD) techniques, equipment use, infection control, and emergency procedures. Home Dialysis nurses will also conduct home visits to assess the environment and ensure safety and compliance. Home Dialysis nurses will also be required to take on call responsibilities for patient and care partner support during and after office hours, and on holidays. Performs the nursing process in a safe therapeutic manner in a designated clinical setting. Provides direct patient care (HHD/CAPD/CCPD) and monitoring of renal dialysis patients. Coordinates home dialysis activities within the frame work of the Federal Regulations, State and Local End Stage Renal Disease Network. Supports and adheres to University Health and department specific policies and standards. Receives mentoring from the Patient Care Coordinator and Director of Dialysis Services.
EDUCATION/EXPERIENCE
Registered nurse who has at least 2 years of experience as an RN, and six months experience in the specific home dialysis modality. BSN is highly preferred. Must meet career ladder Staff Nurse II criteria for specialty area worked. National Certification in Dialysis is preferred. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card.
LICENSURE/CERTIFICATION
Must be a Registered Nurse currently licensed in the state of Texas.
permanent
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Work from anywhere with rare travel demands (AUSTIN)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Senior Mechanical Systems Engineer – Infrastructure Design (Remote) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Lead Structural System Designer – Remote (Pipes and Frames) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) - Remote work flexibility with minimal travel required (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Home Dialysis Nurse (HONDO)
🏢 University Health
Salary not disclosed
POSITION SUMMARY/RESPONSIBILITIES
Trains patients and care partners on self-care home hemodialysis (HHD) or peritoneal dialysis (PD) techniques, equipment use, infection control, and emergency procedures. Home Dialysis nurses will also conduct home visits to assess the environment and ensure safety and compliance. Home Dialysis nurses will also be required to take on call responsibilities for patient and care partner support during and after office hours, and on holidays. Performs the nursing process in a safe therapeutic manner in a designated clinical setting. Provides direct patient care (HHD/CAPD/CCPD) and monitoring of renal dialysis patients. Coordinates home dialysis activities within the frame work of the Federal Regulations, State and Local End Stage Renal Disease Network. Supports and adheres to University Health and department specific policies and standards. Receives mentoring from the Patient Care Coordinator and Director of Dialysis Services.
EDUCATION/EXPERIENCE
Registered nurse who has at least 2 years of experience as an RN, and six months experience in the specific home dialysis modality. BSN is highly preferred. Must meet career ladder Staff Nurse II criteria for specialty area worked. National Certification in Dialysis is preferred. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card.
LICENSURE/CERTIFICATION
Must be a Registered Nurse currently licensed in the state of Texas.
Trains patients and care partners on self-care home hemodialysis (HHD) or peritoneal dialysis (PD) techniques, equipment use, infection control, and emergency procedures. Home Dialysis nurses will also conduct home visits to assess the environment and ensure safety and compliance. Home Dialysis nurses will also be required to take on call responsibilities for patient and care partner support during and after office hours, and on holidays. Performs the nursing process in a safe therapeutic manner in a designated clinical setting. Provides direct patient care (HHD/CAPD/CCPD) and monitoring of renal dialysis patients. Coordinates home dialysis activities within the frame work of the Federal Regulations, State and Local End Stage Renal Disease Network. Supports and adheres to University Health and department specific policies and standards. Receives mentoring from the Patient Care Coordinator and Director of Dialysis Services.
EDUCATION/EXPERIENCE
Registered nurse who has at least 2 years of experience as an RN, and six months experience in the specific home dialysis modality. BSN is highly preferred. Must meet career ladder Staff Nurse II criteria for specialty area worked. National Certification in Dialysis is preferred. Must have current American Heart Association, Basic Cardiac Life Support and Healthcare Provider card.
LICENSURE/CERTIFICATION
Must be a Registered Nurse currently licensed in the state of Texas.
permanent
N
Clinical Nurse II- Infectious Disease
Salary not disclosed
Description
Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve.
UNC Health Nash, an affiliated member of the UNC Health system, invites passionate healthcare professionals to join our esteemed team. Governed locally, we proudly serve a diverse patient base, spanning Nash, Edgecombe, Halifax, Wilson Counties, and beyond. With a steadfast commitment to elevating community health through exceptional care, we prioritize excellence, compassion, and innovation, ensuring every individual receives the highest standard of support. Joining our team means becoming an integral part of our dedication to wellness, where we constantly strive to redefine excellence in healthcare through state-of-the-art facilities and pioneering programs. Join us in this transformative journey, where your contributions will make a lasting impact on our community's health and wellbeing.
Summary:
Provides competent clinical nursing care consistent with professional standards. Reporting and accountable to the Nurse Manager/Director, the Clinical Nurse is responsible for coordinating and delivering patient care utilizing the nursing process in a hospital setting.
Responsibilities:
1. Education - Participates in identifying and meeting learning needs of self. Attends education programs based on identified learning needs. With assistance, uses patient education materials relevant to patient population. Assesses readiness to learn of the patient/family/caregivers. Assesses developmental level of patient and factors affecting ability to learn.
2. Evaluation of Care - Identifies expected patient outcomes. Seeks guidance as needed in revision of plan of care. Participates in discussion with members of the interdisciplinary team in evaluation of patient care. Communicates relevant information to promote continuity of care.
3. Implementation - Demonstrates competence in care of patients with complex problems, including population-appropriate physical, psychosocial, educational and safety aspects of care. Performs bedside point of care testing as required for patient care plan. Utilizes healthcare organization and nursing standards, policies and procedures in delivery of care. Organizes and prioritizes care according to patient/family needs. Consults with appropriate resources in a timely fashion regarding patients with complex care issues, unusual teaching needs and/or those at high risk for discharge planning.
4. Leadership - With assistance, develops goals to promote professional growth or minimize limitations. Achieves goals and objectives within identified time frame or renegotiates with supervisor. Is knowledgeable about activities which facilitate intra/interdepartmental collaboration. Participates in development and achievement of unit goals and performance improvement activities. Effectively uses communication systems. Participates in promoting cost-effective care. Gives feedback to co-workers. Is aware of public policy and regulatory guidelines affecting the health care environment. Promotes a safe, clean and secure hospital environment for all.
5. Patient Assessment - Recognizes data from complex situations to determine priorities for care. Includes appropriate physical, psychosocial, education and safety needs. Synthesizes assessment data into meaningful whole prior to communication to others. Assesses and anticipates discharge needs of individual patients and families. Develops relationships with families that promote their ability to advocate for the patient and their own needs.
6. Planning - Collaborates with patient/family to prepare or update the plan of care. Makes use of available multidisciplinary resources in planning care. Begins to use full range of communication as a means to convey planning. Identifies and addresses cultural and ethnic issues in planning patient care. Demonstrates ability to prioritize tasks for patients with complex problems.
7. Research - Reads journals that contain studies or articles that may be applicable to practice. Brings ideas and questions to the staff at large for assessment of applicability.
Other information:
Education Requirements:
Graduation from a school of professional nursing
Licensure/Certification Requirements:
Licensed to practice as a Registered Nurse in the state of North Carolina.
Basic Life Support (BLS) for Healthcare Provider certification
Professional Experience Requirements:
One (1) year of nursing experience.
Job Details
Legal Employer: Nash Hospitals
Entity: Nash UNC Health Care
Organization Unit: NAS Nash Infectious Disease Clinic
Work Type: Full Time
Standard Hours Per Week: 40.00
Work Assignment Type: Onsite
Work Schedule: Day Job
Location of Job: NASH HC
Exempt From Overtime: Exempt: No
Qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, status as a protected veteran or political affiliation.
Become part of an inclusive organization with over 40,000 teammates, whose mission is to improve the health and well-being of the unique communities we serve.
UNC Health Nash, an affiliated member of the UNC Health system, invites passionate healthcare professionals to join our esteemed team. Governed locally, we proudly serve a diverse patient base, spanning Nash, Edgecombe, Halifax, Wilson Counties, and beyond. With a steadfast commitment to elevating community health through exceptional care, we prioritize excellence, compassion, and innovation, ensuring every individual receives the highest standard of support. Joining our team means becoming an integral part of our dedication to wellness, where we constantly strive to redefine excellence in healthcare through state-of-the-art facilities and pioneering programs. Join us in this transformative journey, where your contributions will make a lasting impact on our community's health and wellbeing.
Summary:
Provides competent clinical nursing care consistent with professional standards. Reporting and accountable to the Nurse Manager/Director, the Clinical Nurse is responsible for coordinating and delivering patient care utilizing the nursing process in a hospital setting.
Responsibilities:
1. Education - Participates in identifying and meeting learning needs of self. Attends education programs based on identified learning needs. With assistance, uses patient education materials relevant to patient population. Assesses readiness to learn of the patient/family/caregivers. Assesses developmental level of patient and factors affecting ability to learn.
2. Evaluation of Care - Identifies expected patient outcomes. Seeks guidance as needed in revision of plan of care. Participates in discussion with members of the interdisciplinary team in evaluation of patient care. Communicates relevant information to promote continuity of care.
3. Implementation - Demonstrates competence in care of patients with complex problems, including population-appropriate physical, psychosocial, educational and safety aspects of care. Performs bedside point of care testing as required for patient care plan. Utilizes healthcare organization and nursing standards, policies and procedures in delivery of care. Organizes and prioritizes care according to patient/family needs. Consults with appropriate resources in a timely fashion regarding patients with complex care issues, unusual teaching needs and/or those at high risk for discharge planning.
4. Leadership - With assistance, develops goals to promote professional growth or minimize limitations. Achieves goals and objectives within identified time frame or renegotiates with supervisor. Is knowledgeable about activities which facilitate intra/interdepartmental collaboration. Participates in development and achievement of unit goals and performance improvement activities. Effectively uses communication systems. Participates in promoting cost-effective care. Gives feedback to co-workers. Is aware of public policy and regulatory guidelines affecting the health care environment. Promotes a safe, clean and secure hospital environment for all.
5. Patient Assessment - Recognizes data from complex situations to determine priorities for care. Includes appropriate physical, psychosocial, education and safety needs. Synthesizes assessment data into meaningful whole prior to communication to others. Assesses and anticipates discharge needs of individual patients and families. Develops relationships with families that promote their ability to advocate for the patient and their own needs.
6. Planning - Collaborates with patient/family to prepare or update the plan of care. Makes use of available multidisciplinary resources in planning care. Begins to use full range of communication as a means to convey planning. Identifies and addresses cultural and ethnic issues in planning patient care. Demonstrates ability to prioritize tasks for patients with complex problems.
7. Research - Reads journals that contain studies or articles that may be applicable to practice. Brings ideas and questions to the staff at large for assessment of applicability.
Other information:
Education Requirements:
Graduation from a school of professional nursing
Licensure/Certification Requirements:
Licensed to practice as a Registered Nurse in the state of North Carolina.
Basic Life Support (BLS) for Healthcare Provider certification
Professional Experience Requirements:
One (1) year of nursing experience.
Job Details
Legal Employer: Nash Hospitals
Entity: Nash UNC Health Care
Organization Unit: NAS Nash Infectious Disease Clinic
Work Type: Full Time
Standard Hours Per Week: 40.00
Work Assignment Type: Onsite
Work Schedule: Day Job
Location of Job: NASH HC
Exempt From Overtime: Exempt: No
Qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, status as a protected veteran or political affiliation.
Not Specified
N
RN Clinical Nurse (TP-6M)-ED
🏢 Nash UNC Health Care
Salary not disclosed
Description
Become part of an inclusive organization with over 40,000 diverse employees, whose mission is to improve the health and well-being of the unique communities we serve.
Summary:
Provides competent clinical nursing care consistent with professional standards. Reporting and accountable to the Nurse Manager/Director, the Clinical Nurse is responsible for coordinating and delivering patient care utilizing the nursing process in a home health setting
Responsibilities:
1. Education--Participates in identifying and meeting learning needs of self. Attends education programs based on identified learning needs. With assistance, uses patient education materials relevant to patient population. Assesses readiness to learn of the patient/family/caregivers. Assesses developmental level of patient and factors affecting ability to learn.
2. Evaluation of care--Identifies expected patient outcomes. Seeks guidance as needed in revision of plan of care. Participates in discussion with members of the interdisciplinary team in evaluation of patient care. Communicates relevant information to promote continuity of care
3. Implementation--Demonstrates competence in care of patients with complex problems, including population-appropriate physical, psychosocial, educational and safety aspects of care. Utilizes healthcare organization and nursing standards, policies and procedures in delivery of care. Organizes and prioritizes care according to patient/family needs. Consults with appropriate resources in a timely fashion regarding patients with complex care issues, unusual teaching needs and/or those at high risk for discharge planning.
4. Leadership--With assistance, develops goals to promote professional growth or minimize limitations. Achieves goals and objectives within identified time frame or renegotiates with supervisor. Is knowledgeable about activities which facilitate intra/interdepartmental collaboration. Participates in development and achievement of unit goals and performance improvement activities. Effectively uses communication systems. Participates in promoting cost-effective care. Gives feedback to co-workers. Is aware of public policy and regulatory guidelines affecting the health care environment. Promotes a safe, clean and secure hospital environment for all
5. Patient Assessment--Recognizes data from complex situations to determine priorities for care. Includes appropriate physical, psychosocial, education and safety needs. Synthesizes assessment data into meaningful whole prior to communication to others. Assesses and anticipates discharge needs of individual patients and families. Develops relationships with families that promote their ability to advocate for the patient and their own needs
6. Planning--Collaborates with patient/family to prepare or update the plan of care. Makes use of available multidisciplinary resources in planning care. Begins to use full range of communication as a means to convey planning. Identifies and addresses cultural and ethnic issues in planning patient care. Demonstrates ability to prioritize tasks for patients with complex problems.
7. Research--Reads journals that contain studies or articles that may be applicable to practice. Brings ideas and questions to the staff at large for assessment of applicability
NASH
Other information:
Education Requirements:
Graduation from a school of professional nursing.
Licensure/Certification Requirements:
Licensed to practice as a Registered Nurse in the state of North Carolina.
Professional Experience Requirements:
Two (2) years of nursing experience caring for acute and chronically ill patients or an equivalent combination of education and experience.
116019917
MUST RESIDE GREATER THAN 50 MILES FROM UNC NASH CAMPUS
Job Details
Legal Employer: Nash Hospitals
Entity: Nash UNC Health Care
Organization Unit: NGH Emergency Room
Work Type: Pay in Lieu of Benefits
Standard Hours Per Week: 36.00
Work Assignment Type: Onsite
Work Schedule: Variable
Location of Job: NASH HC
Exempt From Overtime: Exempt: No
Become part of an inclusive organization with over 40,000 diverse employees, whose mission is to improve the health and well-being of the unique communities we serve.
Summary:
Provides competent clinical nursing care consistent with professional standards. Reporting and accountable to the Nurse Manager/Director, the Clinical Nurse is responsible for coordinating and delivering patient care utilizing the nursing process in a home health setting
Responsibilities:
1. Education--Participates in identifying and meeting learning needs of self. Attends education programs based on identified learning needs. With assistance, uses patient education materials relevant to patient population. Assesses readiness to learn of the patient/family/caregivers. Assesses developmental level of patient and factors affecting ability to learn.
2. Evaluation of care--Identifies expected patient outcomes. Seeks guidance as needed in revision of plan of care. Participates in discussion with members of the interdisciplinary team in evaluation of patient care. Communicates relevant information to promote continuity of care
3. Implementation--Demonstrates competence in care of patients with complex problems, including population-appropriate physical, psychosocial, educational and safety aspects of care. Utilizes healthcare organization and nursing standards, policies and procedures in delivery of care. Organizes and prioritizes care according to patient/family needs. Consults with appropriate resources in a timely fashion regarding patients with complex care issues, unusual teaching needs and/or those at high risk for discharge planning.
4. Leadership--With assistance, develops goals to promote professional growth or minimize limitations. Achieves goals and objectives within identified time frame or renegotiates with supervisor. Is knowledgeable about activities which facilitate intra/interdepartmental collaboration. Participates in development and achievement of unit goals and performance improvement activities. Effectively uses communication systems. Participates in promoting cost-effective care. Gives feedback to co-workers. Is aware of public policy and regulatory guidelines affecting the health care environment. Promotes a safe, clean and secure hospital environment for all
5. Patient Assessment--Recognizes data from complex situations to determine priorities for care. Includes appropriate physical, psychosocial, education and safety needs. Synthesizes assessment data into meaningful whole prior to communication to others. Assesses and anticipates discharge needs of individual patients and families. Develops relationships with families that promote their ability to advocate for the patient and their own needs
6. Planning--Collaborates with patient/family to prepare or update the plan of care. Makes use of available multidisciplinary resources in planning care. Begins to use full range of communication as a means to convey planning. Identifies and addresses cultural and ethnic issues in planning patient care. Demonstrates ability to prioritize tasks for patients with complex problems.
7. Research--Reads journals that contain studies or articles that may be applicable to practice. Brings ideas and questions to the staff at large for assessment of applicability
NASH
Other information:
Education Requirements:
Graduation from a school of professional nursing.
Licensure/Certification Requirements:
Licensed to practice as a Registered Nurse in the state of North Carolina.
Professional Experience Requirements:
Two (2) years of nursing experience caring for acute and chronically ill patients or an equivalent combination of education and experience.
116019917
MUST RESIDE GREATER THAN 50 MILES FROM UNC NASH CAMPUS
Job Details
Legal Employer: Nash Hospitals
Entity: Nash UNC Health Care
Organization Unit: NGH Emergency Room
Work Type: Pay in Lieu of Benefits
Standard Hours Per Week: 36.00
Work Assignment Type: Onsite
Work Schedule: Variable
Location of Job: NASH HC
Exempt From Overtime: Exempt: No
Not Specified
jobs by
✓ All jobs loaded