Fluted Panel Wallpaper Jobs in Usa

• 
  
• Prior manufacturing, sign shop, wood working, or display exhibit craftsmanship is a plus.
  
• Comfortable using basic hand tools (i.e., drills, hammer, utility knife, wrenches & screw drivers).
  
• Ability to read shop drawings, tape measure and ruler.
  
• Strong attention to detail with a focus on quality & ability to distinguish colors.
  
• Ability to work independently with minimal supervision and as a team to meet production schedules.
  
• Demonstrated ability to have reliable and predictable attendance and punctuality.
  
• Ability to lift and maneuver 35-75lb materials on a regular basis.
  
• Ability to handle oversize products - large prints, signage, billboards, etc.
  
• Ability to communicate and understand directions in English both verbally and written is required.
  

Amentum is seeking a 2nd shift Facility Painter in Peoria, Il! Typical work hours are 2nd Shift Mon-Fri 3:00 pm to 11:30pm; hours may vary based on business demand.

The Facility Painter will be tasked with various sized painting projects throughout the facility, including the pre-painting preparatory work.

Responsibilities include, but not limited to:

• Interior prepping and painting of office spaces, hallways, rest rooms, closets, meeting rooms, etc.
• May require some dry wall patching and mudding, and some wall papering or patching.
• Exterior painting includes, but not limited to doors, railings, bollards, walkways and striping.
• Includes other duties as assigned by supervisor.

Physical Requirements:

• Requires the ability to regularly lift up to 50 lbs.
• Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.
• Requires the flexibility to bend/stoop, squat repetitive during shift.
• Requires the ability to regularly kneel repetitive for shift.
• Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.
• Requires the ability to stretch/reach on a repetitive basis for shift.
• Requires the ability to walk extensively throughout the plant during shift.
• Requires the use of a Company/Client approved utility knife.
• Requires the ability to differentiate colors pertaining to paint colors
• Some tasks will require repetitive wrist movement.
• Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.

Minimum Requirements:

• High school diploma or demonstrated equivalent.
• Three years of experience as a residential or commercial painter.
• Experience repairing drywall.
• Experience operating and working from various man-lifts and ladders.
• Experience hanging and patching wallpaper.
• Experience taping off trim.
• Experience at trimming out a room.
• Qualified applicants must pass a medical evaluation for respirator use and be able to successfully complete a fit test for each type of respirator needed for the position or for an approved alternate respirator that provides equal or better protection from identified hazards.
• Must be meticulous and produce high quality work.
• Other duties as assigned.

Additional Information:

• Qualified applicants who are offered a position must pass a pre-employment substance abuse test.
• This position requires a valid Driver's License.
• This position does not include sponsorship for United States work authorization.
• This position will require the ability to obtain a security access badge at our client's location.
• This position may require overtime, various shifts, weekends, holidays, and alternative work.

Special Requirements:

• Wear steel toe/metatarsal safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed.
• General plumbing and electrical knowledge needed or willing to learn.
• Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained.

Compensation Details:

30.00

The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.

Benefits Overview:

Our health and welfare benefits are designed to support you and your priorities. Offerings include:

• Health, dental, and vision insurance
• Paid time off and holidays
• Retirement benefits (including 401(k) matching)
• Educational reimbursement
• Parental leave
• Employee stock purchase plan
• Tax-saving options
• Disability and life insurance
• Pet insurance

Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

• Apply paint, varnish, stain, etc. to interior and exterior surfaces with brushes, rollers, and/or sprayers.
• Properly prepare surfaces prior to application of finish including but not limited to sanding, filling holes, and cleaning.
• Maintain shop areas, all paints and painting supplies, equipment and associated parts of the assigned trade.
• Perform preventative maintenance as needed.
• Other duties as assigned by management.
  
  

• High school diploma preferred.
• One (1) year of previous paint and paperhanging experience preferred.
• Must have hand and finger dexterity necessary to accomplish duties.
• Must be able to stand for extended periods of time during a shift.
• Other physical requirements include but are not limited to grasping, reaching, climbing, kneeling, bending, and twisting.
• Must possess knowledge of necessary equipment and the appropriate safety standards.
• Knowledge of all necessary hand tools and painting equipment.
• Must be able to match paint and wallpaper colors.
• Must have excellent communication skills.
• Proficient in the use of company computer programs to include email and ordering systems.
• Utilization of company work order system to start and complete work orders based on priority.
• Must be able to obtain/maintain any necessary certifications and/or licenses.
  
  

BUILT TO CONNECT

Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world.

About The Position

Primarily responsible for creating electrical drawings and associated documents for retrofit control panel projects supporting asphalt plant automation systems. Works from field audit documentation to develop complete drawing packages for panel manufacturing. Collaborates with Project Engineers and manufacturing to ensure drawings meet project requirements and production needs.

Key Deliverables

Prepares detailed electrical control panel drawings including schematics, wiring diagrams, panel layouts, and I/O assignments

• Creates electrical bills of material and purchased parts lists from drawing packages
• Develops drawing packages from field audit documentation provided by Project Engineers
• Interacts with Project Engineers and manufacturing to confirm requirements and resolve design questions
• Coordinates with Procurement to ensure long lead time items are identified early
• Supports manufacturing with drawing clarifications during panel build

Key Activities & Responsibilities

• Create retrofit panel drawings using EPLAN, maintaining compatibility with legacy AutoCAD documentation
• Work within established drawing standards and templates
• Generate accurate BOMs from completed drawings
• Respond to drawing questions from Controls Center manufacturing team
• Document design decisions and maintain project drawing files
• Supports the project process by reviewing field audit documentation and attending project kickoff meetings to confirm design requirements
• Supports as necessary lending assistance in electrical and controls troubleshooting
• Collaborative electrical print checking
• Timely and accurate correction/resolution of drawing errors
• Engage in Continuous Improvement projects and activities as assigned

To be successful in this role, your experience and competencies are:

• Associates degree or a minimum of two years of equivalent knowledge/experience in electrical design or related field
• Experience with EPLAN required; AutoCAD experience preferred
• Knowledge of the National Electric Code and UL 508A panel requirements
• Ability to select proper components, size starters, breakers, wiring and conduit
• Ability to read electrical ladder diagrams and control schematics
• Knowledge of PLCs and industrial control system components
• Strong attention to detail and ability to work from field documentation
• Willingness to work overtime as needed to meet project deadlines

Supervisor and Leadership Expectations

• No supervisory responsibilities

Our Culture and Values

Employees that become part of Astec embody the values below throughout their work.

• Continuous devotion to meeting the needs of our customers
• Honesty and integrity in all aspects of business
• Respect for all individuals
• Preserving entrepreneurial spirit and innovation
• Safety, quality and productivity as means to ensure success

WORK ENVIRONMENT

Office Environment

While performing the duties of this job, the employee works primarily in an office environment using computer-based design tools. Duties include extended computer work, sitting or standing at a workstation. The employee may occasionally visit the Controls Center manufacturing facility to support panel builds or resolve drawing questions. When in the manufacturing area, the employee may be exposed to moving mechanical parts, tools and equipment, and moderate noise levels. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EQUAL OPPORTUNITY EMPLOYER

As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Company Overview

Headquartered in Bensalem, PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company.

EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Glass & Glazing, Slate & Cooper Roofing, and Waterproofing.

EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards.

Job Summary

We are seeking a motivated individual looking to join an exciting and diverse team. This is a tremendous opportunity for an individual who wants to join a specialty contractor that performs work on many of the largest construction projects in the Northeast. The candidate must have experience in exterior envelope construction. Responsible for project scheduling, material and subcontractor procurement, construction coordination, site logistics, project change management, and budget forecasts. Position also requires customer interaction at a very high level.

This position is onsite out of our Elizabeth, NJ location.

Job Responsibilities

• Manage all aspects of project execution including scheduling, procurement of materials and subcontractors, site logistics, construction coordination, change management, and budget forecasting.
• Oversee installation of various roofing systems, including single-ply membranes (EPDM, PVC, TPO), SBS, hot-modified systems, underground waterproofing, and air/vapor barriers (both liquid and sheet-applied).
• Supervise the construction of commercial, healthcare, and educational facilities across the Philadelphia region.
• Coordinate the installation of a variety of panel systems such as aluminum composite panels, insulated panels, single-skin corrugated panels, phenolic panels, and fiber cement panels.
• Manage project controls across all phases—Pre-Construction, Construction, and Close-out. Responsibilities include understanding scopes and contracts, liaising between the contract and management teams, and supervising administrative, operations, maintenance staff, and subcontractors.
• Prepare accurate cost forecasts, manage project submittals and schedules, maintain detailed communication records, respond promptly to emails, review supplier purchase orders, and attend weekly project meetings.

Requirements

• Bachelor’s Degree preferred.
• Five (5) years of construction management experience is desired.
• Strong and demonstrated attention to detail, accuracy and thoroughness.
• Ability to multi-task and take direction.
• Knowledge of Construction Industry
• Proficient in Excel, Word, Adobe

Benefits

• Paid time off
• Health insurance with medical, dental and vision
• 401K eligible after 2 months, company matching after one (1) year of employment
• Performance based merit increase
• Tuition Reimbursement Program
• Company wide events

This information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications.

EDA Contractors is an equal employment opportunity employer and is committed to a diverse workforce. EDA Contractors does not discriminate on the basis of race, color, religion, national origin, gender, gender identity or expression, sexual orientation, age, marital status, veteran status, disability status, or any other categories protected by applicable federal or state law. Here at EDA Contractors we strive to promote and sustain a culture of diversity, inclusion, and belonging every day.

For more information about EDA, please visit our website at only, recruiters please don’t contact any EDA employee about this job post. No phone calls or emails will be accepted.

• Bachelor’s degree in mechanical engineering
• Thorough knowledge of engineering design & development concepts of automotive BIW system .
• Experience in side body panel, Roof, Floor panel and other BIW components
• Very good proficiency in CATIA V5/V6
• Bachelor’s degree in Mechanical, Engineering.
• 3+ years of proven experience designing high-volume designs of BIW parts
• Development of outer skin panels (A-Surface) in collaboration with OEM Design Studio, Design Engineering, CAE, etc.
• Development of inner panels, reinforcements, brackets and other structural panel
• Ability to create and completion of Sheet metal parts e.g. brackets, Panels, etc
• Design of automotive component parts in CATIA V5. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Strong communication skills, both verbal and written, and capability to drive 10 people offshore team
• Actively engage with Automotive OEM design engineers to collaborate on design projects for trading off cost, mass, joining methods, formability, and performance.
• Interpret CAE simulation results and integrate recommendations into product design
• Strong working knowledge of Design for Manufacturing, including formability with GD&T and dimensional engineering.

Responsibilities

• Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive seating system and subsystem design and development
• Thorough knowledge of engineering design & development concepts of automotive Seating system
• Very good proficiency in CATIA V5/V6. Prepare and execute design release in the 3DExperience PLM system. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Experience in design of Seat and seat components e.g. Cushion Frame, Back frame, Headrest, seat plastic and recliners and track
• Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Seat parts.
• Knowledge and understanding of Tooling and manufacturing processes
• Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&T
• Ability to perform Complete Seat packaging study of seating components
• Working knowledge of regulatory and certification requirements for seating system
• Maintain and develop Design Validation Plans (DVP), and Design Failure Mode Analysis (DFMEA)
• Good knowledge of seating system and component manufacturing processes
• Ability to define seating comfort and define comfort target
• Actively engage with Automotive OEM / Tier-I design engineers to collaborate on design projects for trading off cost, mass, joining methods, molding and testing performance.
• Propose and promote design improvement approaches including cost reduction and design optimization
• Complete and release Seating system, sub-system and detail designs
• Interpret CAE simulation results and integrate recommendations into product design

• Collaborate with seating suppliers and support overall vehicle development milestones and prototype/production build events

• Must have ability to perform feasibility studies, Check A-class surface and define craftsman ship target.

• Meet project deliverables commitments and timelines

• Design of automotive component parts in CATIA V5/V6

• Strong communication skills, both verbal and written, and capability to drive offshore team.

Job Description

NEW OPPORTUNITY for an Electrical Assembly Intern at Gratz Operations!

Assist and support the current Assembly team with electrical assembly projects, while learning and gaining experience in electrical machine design, machine testing, and/or machine controls. This position is one that understands how to read electrical schematics and can assist in properly building panels, routing, and terminating wires for complete machines. The ability to operate manual and powered hand tools, such as drills, grinders, and sanders is desired. This position is under the supervision of the Assembly Team and Electrical Engineers. 

DUTIES AND RESPONSIBILITIES:

· Responsible for assisting higher-level Assemblers and Engineers in electrical panel builds.

· Read and understand assembly drawings, electrical schematics, and assembly instructions.

· Follow standard assembly procedures and adhere to pre-determined best assembly practices.

· Hand drill, ream, and tap holes for wire hold downs as needed.

· Layout and build electrical panels working off drawings and schematics.

· Properly label all wires according to electrical prints and schematics, and verbal instructions.

· Route and terminate wires according to electrical prints and schematics and verbal instructions.

· Work with engineers in the testing of electrical panels and machines.

· Work with a cooperative team when necessary.

· Ability to follow instructions without constant supervision.

· Maintain a safe and clean workstation while having a safety-conscious mindset.

· Working with Engineers and the manufacturing team improves the manufacturability of machinery.

· Prioritize workload to ensure that deliverables are completed in timelines that meet customer expectations

· Performs other Duties as assigned.

QUALIFICATIONS, SKILLS, AND ABILITIES:

· Minimum 1 year of experience in Hands-on electrical machine assembly, panel building, electrical maintenance role, or other electric work. An equivalent combination of experience and education to successfully perform the essential functions of the position will also be considered.

· Able to read and understand engineering assembly drawings, instructions, schematics, and prints.

· Basic electrical machine systems understanding required.

· Basic Understanding of stop/safety controls and safety interlocks required.

· Ability to interface with individuals with diverse backgrounds at varying levels of the organization.

· Fluent in Microsoft Office products (Excel, Word, PowerPoint, etc.) desired.

· Strong passion, high energy, and enthusiasm for growth.

· Strong communication skills and detail-oriented.

· Strong time management, organizational skills, and ability to set priorities for multiple tasks.

· Ability to work in a production environment, if required.

· Ability to self-start and work independently.

What We Offer

Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company.

- Three comprehensive Medical plan options

Prescription

Dental

Vision

- Company Paid Life Insurance

- Voluntary Life Insurance

- Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance

- Company-paid Short-Term Disability

- Company-paid Long-Term Disability

- Paid time off (PTO) and paid Holidays

- 401k retirement plan with company match

- Employee Assistance Program

- Teladoc

- Legal Insurance

- Identity Theft Protection

- Pet Insurance

- Team Member Discount Program

- Tuition Reimbursement

- Yearly Wellness Clinic

MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Join this growing Company in the recycling of plastics through the build-out of new plants. Continuous Process in a PSM regulated environment is what you will need to be successful in this role. Corporate role on site in Atlanta, GA. One plant operational, 2nd plant coming online this year and more in the works!

Role Overview

Our client is seeking an experienced Senior Electrical / Controls Engineer to join their team and support the development of engineering and construction packages for facility expansion and buildouts.

The role will be the primary lead on specification and procurement of instrumentation related to

process control, process indication, and control system infrastructure.

This role reports to Company Electrical Engineering Manager.

Responsibilities

• Assist with the design and modification of new and existing process control and instrumentation systems.

• Specify both discrete, analog, and networked control solutions.

• Prepare specifications, design-bid documentation, and construction estimates.

• Review supplier designs against licensor requirements, code requirements, and customer

requirements.

• Develop instrumentation standards to ensure selection compliance across multiple facilities.

• Develop maintenance procedures for instrumentation and control systems.

• Develop inspection plans for instrumentation and control systems.

• Develop commissioning plans for projects and system upgrades as required.

• Make recommendations for additional equipment as necessary.

• Participate in the review of Management of Changes, PHA Action Requests, Construction

Information Requests, and Change Order Requests.

• Experience in continuous process manufacturing in all the following project phases:

documentation, detailed design generation, implementation, system integration, testing and on-site, startup, using PSM (Process Safety Management) elements and Industrial standards.

• Assist with local, state, and federal permitting applications.

• Potential to travel to other Nexus locations or vendor locations for meeting or Factory Acceptance

Testing (FAT) as required (~10%).

• Design and specify 480V distribution infrastructure, motor control centers, VFD panels, PLC

panels, RIO panels, and other control panels.

• Assist with local, state, and federal permitting applications.

Education

• BS in Electrical Engineering or extensive documented experience in lieu of engineering degree.

Experience

• 10+ years previous experience developing PLC programs, using multiple vendor hardware, for

process and discrete controls. Rockwell ControlLogix (primarily), Codesys, Siemens TIA Portal.

• 7+ years designing electrical control, motor control and heater control panels.

• 7+ years’ experience using AutoCAD Electrical.

• 7+ years of field installation / construction experience

• Strong background and understanding of P&ID drawings.

• Knowledge and experience with applicable NEC, UL / CSA standards for electrical equipment &

Electrical construction best practices.

• Previous experience with PSM-covered facilities.

• Previous experience working with Management of Change (MOC) and Continuous process

Improvement programs.

• Experience with multiple industrial communication protocols, i.e. Ethernet I/P, Modbus TCP / RTU,

Profibus / Profinet, etc.

• Industrial Power distribution systems to 480 VAC.

• Exposure to Medium Voltage power distribution (4160 VAC or higher).

Knowledge, skills, and abilities

• Self-starter with strong initiative.

• Entrepreneurial spirit and attitude.

• Ability to manage multiple projects on different timelines.

• Comfortable in a fast-paced, purpose-driven, collaborative environment.

• Experience working with multiple outside engineering groups.

• Demonstrate a strong desire to learn manufacturing processes.

Must be authorized to work in the USA without the need for sponsorship now or in the future.

Field Senior Foreman – Glazing & Metal Panels

Overview

We are seeking a skilled Field Senior Foreman to lead on-site glazing and metal panel projects. The ideal candidate combines hands-on construction experience with strong leadership, guiding crews to complete work safely, efficiently, and to high-quality standards. While experience in glazing or metal panels is preferred, candidates from other construction trades with field management experience are encouraged to apply.

Key Qualifications

• Hands-on experience leading construction crews in commercial projects
• Background in construction science, engineering, or a related field is preferred
• Prior roles as a senior foreman, project engineer, or junior superintendent are highly desirable
• Ability to read and follow shop drawings accurately
• Familiarity with Bluebeam, Excel, and other construction software; Power BI is a plus
• Strong written and verbal communication; Spanish-speaking is an advantage

Responsibilities

Safety & Compliance

• Maintain and enforce safety protocols, OSHA standards, and project-specific requirements
• Lead daily safety briefings, toolbox talks, and Job Hazard Analyses
• Ensure proper use of PPE, rigging, lifting, and material handling
• Address unsafe conditions immediately

Crew Leadership & Labor Management

• Oversee both permanent employees and temporary labor assigned to the site
• Assign daily tasks and crew sizes to meet production and scheduling goals
• Foster a professional and disciplined work environment

Project Execution & Quality

• Monitor labor performance, manage efficiency, and reduce rework or material waste
• Inspect work to ensure compliance with plans, specifications, and manufacturer standards
• Identify and correct deficiencies promptly

Coordination & Communication

• Serve as the primary point of contact for the field team on glazing/metal panel work
• Collaborate with project management, general contractors, and other trades to maintain workflow
• Communicate progress, issues, and changes effectively

Material & Equipment Oversight

• Verify material deliveries and ensure proper storage and handling
• Coordinate staging, sequencing, and correct use of lifts, tools, and equipment

Documentation & Reporting

• Maintain accurate daily reports, time tracking, and field notes
• Document safety, quality, or schedule issues and provide updates for project management

Mentoring & Accountability

• Train and guide crew members on proper installation techniques
• Set clear expectations for quality, productivity, and conduct
• Address performance issues and escalate as needed

Ideal Candidate

• Proven experience leading construction crews on commercial projects
• Strong knowledge of glazing and metal panel installation or related construction work
• Dedicated to quality, safety, and efficiency
• Capable of mentoring team members and driving project success

Reach out to for immediate consideration.

Job Title: Journeyman Electrician

Location: Piedmont, South Carolina

Join Us at Isuzu – Moving the World, For You

Isuzu is looking for motivated and talented individuals to join us as we complete our state-of-the-art assembly plant and begin producing high quality, reliable, and environmentally-sound medium-duty commercial trucks in Greenville County. As a global leader in the manufacture and distribution of commercial trucks with a focus on growth, innovation, and people, we aim to create an environment where individuals thrive and contribute to lasting progress.

Our mission is rooted in sustainability and innovation. We are developing technologies such as natural gas, electric vehicles, and hydrogen power to reduce environmental impact and influence the future of mobility. We prioritize customer satisfaction, pursue bold business ideas, and seek to uplift the communities we serve.

Innovation is central to our operations. We embrace change, encourage creativity, and continuously challenge the status quo. At Isuzu, your ideas are valued, and together, we advance the industry with reliable and responsible solutions. United by our values and commitment to excellence, we invite you to join a team that’s moving the world forward—with purpose, with passion, and with you.

About the Facility

Isuzu North America Corporation is investing approximately $280 million to establish a new production facility in Greenville County, South Carolina. This 1 million-square-foot, state-of-the-art plant—set on over 200 acres—will feature a flexible production line capable of manufacturing both internal combustion and electric vehicles. Production will include the N-Series Gas, N-Series Electric, and F-Series Diesel trucks, with a targeted capacity of up to fifty thousand units by 2030. Operations are expected to launch in 2027, with expansion slated for 2028.

Strategically located near I-85, I-26, and the Port of Charleston, the site supports streamlined logistics and consolidated operations under one roof. This initiative is projected to create over 700 new jobs in the area.

What You Need

• High school diploma or GED required
• Completion of a state-approved electrical apprenticeship program or vocational training in electrical systems
• Valid state-issued Journeyman Electrician License, or the ability and willingness to obtain licensure within a designated timeframe
• Minimum 3 years of experience as an industrial or commercial electrician in a manufacturing environment
• Familiarity with single-phase and three-phase power systems up to 480V
• Experience with motor controls, relays, starters, and electrical panels
• Proficiency in interpreting electrical codes, schematics, and safety standards
• Strong understanding of industrial power distribution and wiring practices
• Skilled in conduit bending, panel wiring, motor installation, and lighting systems
• Knowledge of NFPA 70E, NEC, and OSHA electrical safety protocols
• Ability to use electrical testing equipment including multimeters, megohmmeters, and circuit tracers
• Competent in documentation, CMMS use, and following standard operating procedures
• Strong troubleshooting and problem-solving abilities
• Effective communication and teamwork skills

What You Will Do

• Install, maintain, and repair electrical systems including conduit, wiring, switchgear, panels, motors, and lighting
• Perform electrical inspections and preventive maintenance on facility and equipment wiring systems
• Troubleshoot electrical issues on production machinery, panels, motors, and circuits
• Interpret electrical drawings, wiring diagrams, schematics, and panel layouts
• Ensure compliance with NEC, NFPA 70E, OSHA, and company safety procedures including lockout/tagout (LOTO)
• Assist in the installation and commissioning of new machinery and facility systems
• Maintain documentation of maintenance, inspections, and modifications in CMMS
• Support coordination with contractors and vendors during electrical projects or upgrades
• Participate in root cause analysis for recurring electrical failures and implement corrective actions
• Perform other duties as assigned to support company and department goals

Compensation & Benefits

• Competitive base salary
• Opportunity for annual merit increases
• Opportunity for annual bonuses
• Paid time off
• Comprehensive healthcare
• Savings Plan (401k) with company match
• Annual Retirement Contribution (ARC) – additional money added to your 401(k)
• Tuition Reimbursement
• Paid Parental Leave
• Family Building, Fertility & Adoption Assistance

Why Join

• Be part of a greenfield startup operation with a global automotive leader
• Influence the development of a brand-new manufacturing plant
• Collaborate with world-class partners like Volvo, GM, and Cummins
• Join a leader in the light commercial truck industry
• Support a high-impact initiative bringing over 700 jobs to South Carolina

Equal Opportunity Employer M/D/F/V/SO.