Flexible Electronics Jobs in Usa
1,415 positions found — Page 70
Date Posted:
2026-02-02Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Mechanical Engineering group in the Shipboard Effectors Department is currently searching for an experienced Mechanical Design Engineer to work on a multi-discipline team to support design and upgrades of Shipboard Effectors products and subsystems.
This is an onsite role and located in Tucson, AZ.
What You Will Do:
Utilizing strong mechanical hardware design experience and knowledge with ruggedized structures, interconnects, cooling, and electronics integration
Supporting all phases of programs from capture and concept development through production
Developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of electronics for multiple military programs
Supervising the definitions of mechanical outline and construction details, component selection and specification, mechanical and assembly drawings, electrical/RF layout, and delivering the final technical data package
Employing transition-to-production practices with the ability to lead a design release into production
Tracking, reporting, and meeting cost, schedule, quality, and performance requirements for the finished product, including Earned Value (EV) management and Estimate at Complete (EAC) inputs
Preparing proposal inputs on behalf of the product area
Providing technical conscience, challenged with making sure the product and process meet appropriate standards and requirements while helping to remove roadblocks
Working with minimal direction or supervision, while exercising considerable latitude in determining the technical objectives of the assignment while meeting cost, schedule, quality, and performance requirements for the finished product.
Leading a small team of mechanical engineers when required
Interacting frequently with senior personnel, occasionally including external customers, on significant technical matters often requiring coordination between organizations.
Qualifications You Must Have:
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience or An Advanced Degree in a related field and minimum 5 years experience.
A minimum of eight (8) years of experience in the design of electronics packaging for military or aerospace or commercial applications
Experience with GD&T (Geometric Dimensioning & Tolerances)
The ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance
Qualifications We Prefer:
Experience with ANSI drawing standards and/or first order or structural analysis techniques.
Experience with design to military standards
Strong technical background with high technical aptitude
Strong leadership skills and project management, sub contract management experience
Experience with CREO (Pro/E) or similar 3D solid modeling software
Cognizant of machine suppliers’ capabilities or have direct experience in a manufacturing and assembly support role for producibility
Familiarity with the design and manufacturing processes of CCAs, mechanical/RF components, metal housings, structures, and electronics assemblies
Must have a working knowledge of Microsoft Office (Word, Excel, PowerPoint)
Very strong verbal and written communications and interpersonal skills when working with team members and customers
Advanced degree in Mechanical, Electrical or Aerospace Engineering
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation.
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
ProSearch is partnering with a confidential client in the manufacturing space to hire a Senior Project Manager experienced in New Product Development (NPD) and New Product Introduction (NPI). This role leads complex electronics and embedded systems projects from concept through manufacturing transfer, ensuring on-time delivery, quality excellence, and regulatory compliance.
This is a career-defining opportunity for project leaders who thrive in technically rigorous, regulated industries and are passionate about cross-functional collaboration, structured execution, and team mentorship.
Responsibilities
- Deliver high-complexity NPD/NPI projects on scope, schedule, budget, and quality objectives.
- Serve as the primary customer interface, managing expectations and aligning deliverables with strategic goals.
- Lead cross-functional teams to define scope, schedules, cost estimates, and resources.
- Plan and manage all project phases, from design and verification to validation and manufacturing transfer.
- Maintain detailed project plans, risk registers, and status reports for stakeholders.
- Track milestones, manage dependencies, and proactively mitigate risks.
- Manage scope changes with PMO leadership and account managers.
- Drive continuous improvement by developing PMO processes, templates, and tools.
- Foster a collaborative, results-driven culture emphasizing quality, efficiency, and technical rigor.
Requirements
- 5–10 years managing complex technical projects in electronics product development, engineering services, or manufacturing.
- Proven ability to lead multidisciplinary teams and deliver large-scale, technically complex projects.
- Technical expertise in electronics, embedded systems, and manufacturing/NPI principles (DFM/DFT, verification/validation, production transfer).
- Knowledge of regulatory frameworks (FDA, ISO 13485) and experience applying them in project execution.
- Proficiency with project planning, scheduling, and resource management tools (Microsoft Project preferred).
- Strong organizational, analytical, and problem-solving skills, with attention to cost, schedule, and quality.
- Excellent communication, leadership, and mentoring abilities.
- Experience in regulated industries preferred (medical devices, automotive, defense).
Preferred
- PMP or equivalent certification.
- Lean/Six Sigma, or continuous improvement experience
Benefits
- Health wellness program with cash incentives
- Health insurance with low deductibles
- Disability, dental, and life insurance
- 401K retirement plan
- Tuition reimbursement
- Flexible medical and dependent care spending accounts
- On-site fitness gym
Why Join Us
At ProSearch and our client, your contributions directly impact product innovation, regulatory compliance, and operational excellence. You’ll join a collaborative, inclusive culture that values growth, mentorship, and measurable results.
Take the Next Step
If you are a results-driven Senior Project Manager ready to lead high-impact NPD and NPI projects in electronics, embedded systems, and manufacturing, we want to hear from you. Bring your expertise, leadership, and passion for structured execution to a team that values innovation, regulatory excellence, and measurable results.Apply now to make an impact.
Date Posted:
2026-02-17Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.
An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.
The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.
Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.
This position is 100% onsite in Huntsville, Alabama
What you will do
- Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
- Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.
- Perform pin crimping, wire routing, and use hand and powered tools.
- Test and troubleshoot systems using multimeters and other diagnostic tools.
- Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.
- Perform physical tasks such as retrieving, storing, and installing equipment.
- Work from detailed assembly drawings, schematics, or work instructions.
- Work from verbal instructions and conceptual ideas to a achieve a desired output.
- Recognizing failures and isolating problems and suggesting appropriate corrective action.
- Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.
- Manage inventory, paperwork, and maintain organizational standards.
Qualifications You Must Have
- High School Diploma or equivalent (GED) and A minimum of 2 years of work experience.
- Assemble and configure rack-mounted test systems, cables, and harnesses
- Verification/Inspection experience with associated standards, processes, and documentation.
Qualifications Preferred
- Work experience with mechanical and soldering standards, processes, and documentation.
- Experience working within an Engineering Technical Support Environment.
- Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
- CCA manufacturing experience.
- Knowledge of Fabrication Standards, Processes, and Documentation.
- IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications
- Associates Degree in a Technical field.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 41,400 USD - 72,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-02Country:
United States of AmericaLocation:
US-AZ-TUCSON-M10 ~ 3360 E Hemisphere Loop ~ BLDG M10Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Mechanical Engineering group in the Shipboard Effectors Department seeking an experienced Mechanical Engineer REA (Responsible Engineering Authority) to contribute to the mechanical technical team for a common Guidance Unit (Stack). This role is primarily responsible for maintaining mechanical Technical Data Package (TDP) configuration changes, driving producibility updates, supporting failure investigations, supporting alternate component and material evaluations and testing, providing support across the full spectrum of mechanical, environmental, structural, and thermal engineering disciplines. Additionally, the mechanical engineer will be part of a small team of mechanical engineers, ensuring successful support of both production and development efforts.
This is an onsite role and located in Tucson, Az.
What You Will Do
Serve as the mechanical engineer to support documentation, mechanical, environmental, structural, and thermal aspects of different stack configurations.
Contribute to a small team of mechanical production REAs supporting mechanical production and development efforts, ensuring technical excellence and alignment with program objectives.
Oversee and manage all mechanical, slice and stack TDP configuration changes, ensuring updates address producibility improvements, yield optimization, and design enhancements.
Lead efforts to analyze and incorporate producibility updates into designs to improve manufacturing efficiency and reduce production defects.
Support failure investigations, conducting root cause analyses and implementing corrective actions to resolve systemic mechanical issues.
Provide technical guidance on mechanical design, analysis, and integration challenges, ensuring compliance with program requirements and performance specifications.
Drive design for manufacturability (DFM) practices and lead efforts to identify and implement cost-saving opportunities in mechanical assemblies.
Collaborate with cross-functional teams, including systems engineering, quality, and supply chain, to resolve mechanical engineering challenges and ensure seamless integration of stack configurations.
Provide oversight and review of hardware performance during environmental testing, including structural and thermal analysis, to ensure compliance with design requirements.
Maintain and update mechanical TDPs, processing engineering change requests such as IRs, CNs, SRs, and variances to ensure accurate and current documentation.
Positive attitude toward being mentored by experienced technical team members and subject matter experts within Raytheon.
Qualifications You Must Have:
Typically requires a Bachelor's Degree in Science, Technology, Engineering, and Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years experience.
Five years’ experience in mechanical design and design documentation
Experience with 3D CAD tools (modeling and drawing)
Experience with Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5
Experience with the packaging of electronics assemblies
Knowledge of environmental testing and hardware performance validation, including structural and thermal analysis.
The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
Strong interpersonal and communication skills; both verbal and written
Experience in mechanical sub-systems packaging, materials, interconnects, or large assembly development
Experience with managing engineering change processes, including IRs, CNs, SRs, and variances.
Proficient in Creo (modeling and drawing) and Windchill (PDM)
Strong understanding of design for manufacturability (DFM) and design for producibility (DFP) principles.
Active DoD issued security clearance
Experience working in the aerospace and defense industry.
Advanced degree in Engineering discipline
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Northrop Grumman Aeronautics Systems is looking to add a Senior Principal Electronics Engineer - Infrastructure Architect to our team in Rancho Bernardo, CA or Palmdale, CA, depending upon the selected candidate’s preference. The candidate should have familiarity working in an Integrated Product Team construct.
Roles and Responsibilities will include:
- Understand and decompose customer requirements to support Infrastructure as a Service development and delivery across multiple business areas and baselines
- Monitor external technology development and maturation both in industry and within the company, applying new technologies and principles across programs to build a consistent technical vision for data center systems
- Participate in development and peer reviews
- Work with Thread Leads as well as system Responsible Engineers to develop acceptance criteria for engineering design and implementation, ensuring consistency of implementation across multiple business areas and baselines
- Lead new design and capture efforts across the enterprise to build the foundation for future systems and incorporate opportunities into existing programs
- Decompose complex issues into high-level executive briefs for program leadership
- Provide technical leadership to a team of cloud and infrastructure engineers
- Provide technical leadership, direction, and knowledge transfer to other team members during the implementation of technical solutions
The selected candidate will be required to work full-time, on-site at our facility. There is no remote / hybrid / telework available for this position. Travel up to 25% may be required.
Basic Qualifications:
- Bachelor’s Degree in a relevant STEM (Science, Technology, Engineering or Mathematics) discipline and 8 years of related engineering experience; OR a Master’s degree in a relevant STEM discipline and 6 years of related engineering experience; OR a PhD in a relevant STEM discipline and 4 years of related engineering experience.
- Experience developing and deploying highly scalable datacenter systems to support IaaS models
- Experience designing and developing on-premises and hybrid datacenter systems utilizing technologies such as VMware ESXi/VCF and Microsoft Azure
- Experience in scripting/programming languages such as Python, PowerShell, Visual Basic, .Net, Java, C, and C#
- Experience designing and developing multi-tier storage solutions
- Infrastructure automation experience with tools such as Ansible, Puppet, Terraform, etc.
- Experience with automated documentation tool(s) such as Sphinx or MkDocs
- Experience with or ability to author and maintain technical installation, configuration, and update documentation
- Experience with or ability to create end-to-end infrastructure blueprints/roadmaps that meet scalability, reliability, security, and program SOW
- Active DoD Top Secret clearance (with a background investigation within the past 5 years or enrolled into Continuous Evaluation).
- Current SCI OR SCI eligibility
- Ability to obtain and maintain initial Special Program Access (SAP/PAR). This SAP/PAR must be obtained prior to commencement of employment and must be obtained within a reasonable amount of time as determined by the company to meet its business needs.
Preferred Qualifications
- Current applicable program access.
- Experience leading a technical team including estimating, assigning, and tracking work
- Experience with matrixed organizations and remote/distributed teams
- Proven track record of building and mentoring high performing engineering teams.
- Excellent communication, interpersonal skills, and the ability to interface with all levels of employees and management, and translate technical concepts to non-technical stakeholders.
- Friday
- 1st Shift (Day) Pay: $19.25/hour Location: Fort Worth, TX 76177 Schedule: Monday
- Friday 6am
- 2:30pm Electronic Technician II The Electronic Technician II is responsible for setting up, configuring, troubleshooting, and repairing production test systems and products to the system level.
This role provides technical support and feedback to the production team while ensuring compliance with safety and quality standards.
Primary Responsibilities Use, set up, configure, and calibrate test equipment such as soldering tools, oscilloscopes, and related devices.
Troubleshoot and repair products down to the component level.
Read and understand schematics.
Collaborate with Quality Control to ensure proper setup and calibration of products.
Work with Original Equipment Manufacturers (OEMs) to obtain New Product Information (NPI) and resolve design or testing issues.
Understand and utilize the Warehouse Management System (WMS).
Train and implement processes within the assigned department.
Perform work safely and in accordance with company and customer standards and safety regulations.
Education / Experience High school diploma or GED required.
2--4 years of relevant experience.
Proficient in Microsoft Outlook and Excel.
Prior experience with WMS preferred.
Familiarity with PC hardware configuration, including Windows OS and LAN setup.
Strong written and verbal communication skills.
Customer service driven.
Strong team player.
Requirements, Perks, and Benefits (US -- Non-Exempt) Physical & Cognitive Requirements (With or Without Accommodation) Ability to follow policies and procedures Ability to read, write, and interpret information Ability to add, subtract, multiply, and divide Ability to use hands to finger, handle, or feel Ability to sit, walk, or stand for the duration of the shift Must possess visual acuity to perform essential job functions Ability to conduct physical tasks with a full range of motion throughout the warehouse environment Ability to lift/carry items up to 50 pounds Equal Opportunity Employer FedEx Supply Chain, Inc.
is an Equal Opportunity Employer, including veterans and individuals with disabilities.
Know Your Rights Pay Transparency Family and Medical Leave Act (FMLA) Employee Polygraph Protection Act E-Verify Program Participant Federal Express Corporation participates in the Department of Homeland Security U.S.
Citizenship and Immigration Services' E-Verify program (for U.S.
applicants and employees only).
Please click below to learn more: E-Verify Notice (bilingual) Right to Work Notice (English) / Spanish FedEx Supply Chain is committed to providing access, equal opportunity, and reasonable accommodation for qualified individuals with disabilities in its application procedures, hiring, and other terms and conditions of employment.
To request a reasonable accommodation, please contact .
Perks and Benefits at FedEx Supply Chain (FSC) Competitive Pay: FedEx Supply Chain offers competitive hourly rates depending on your location and experience.
401K plan with company match after 1 year Tuition reimbursement program Holiday pay and accrued paid time off (Vacation and PTO) Medical, dental, vision, and voluntary benefits available on day one Basic life insurance Basic AD&D coverage Supplemental Life and Supplemental AD&D Short-Term and Long-Term Disability (for full-time employees after 180 days of service) Paid parental leave for both moms and dads Paid bereavement and jury duty Job Disclaimer (US) Please note that this job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
The Company reserves the right to modify duties or assign additional responsibilities as necessary to meet business needs.
Date Posted:
2026-02-26Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Effector Digital Products Department is seeking an electrical engineering leader with experience in engineering management, design, test, and integration. The Section Leader will utilize advanced technical knowledge in FPGA/ASIC Design/Verification and/or Digital CCA Design, and an understand the impact of this work on other areas of the organization.
The candidate will work with section members to provide career guidance, performance feedback, and technical leadership to enable the employee for success. Responsibilities will be split between supporting program(s) as an engineer (~90%) and providing functional leadership to the section (~10%).
What You Will Do
- Manage a section of 15 to 20 engineers.
- Provide career and technical mentoring
- Lead functional and cross-disciplinary teams to meet organizational goals and project needs
- Support hiring (resume reviews, interviews, etc.)
- Elicit and compile performance feedback to support Performance Development
- Hold required formal Mid-Year and Year-End Performance Development (PD) discussions where compiled feedback, key strengths and development needs are conveyed
Engineering Responsibilities to Anticipate
- The engineering responsibilities for this position could support Digital CCA and/or FPGA/ASIC technologies within the Effector Digital Products (responsibilities align to your field of expertise).
- Design and deliver production quality FPGA releases from initial proof of concept up to production
- Architect FPGA-based systems to determine parts, interfaces, and Concept of Operations (CONOPS)
- Translate system level requirements into FPGA requirements
- Design and code in VHDL for reliability and maintainability
- Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage
- Demonstrate technical expertise in digital signal processing, FPGA/ASIC design/verification, CCA design, integration and test of radar hardware, and/or system architecture
- Lead functional or cross-disciplinary teams to meet organizational goals and project needs
- Design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications
- Circuit card design including hardware designs with processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART
Qualifications You Must Have
- Typically requires a Bachelor's Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience
- The ability to obtain and maintain a US security clearance prior to the start date.
- Minimum of ten (10) years of professional, applicable experience to include at least two (2) of the following:
- FPGA or ASIC design
- FPGA or ASIC verification
- Integration and test of missile/FPGA hardware or system architecture
- Digital signal processing
- Digital CCA Design
Qualifications We Prefer
- Master of Science (MS) in Electrical Engineering or Computer Engineering
- Experience serving as a Responsible Engineering Authority (REA), Control Account Manager (CAM), and/or Integrated Product Team Lead (IPTL)
- Failure investigation, root cause identification, and corrective action implementation
- Development of technical proposals, engineering project estimates, and/or white papers
- Requirements verification test planning and execution
- Experience creating and presenting professional level design documentation to company leadership and program customers
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This position is eligible for relocation.
Location Information
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
Huntsville Location information:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Main Responsibilities:
- Preparing and testing equipment prior to rental and post hire including visual inspection, function testing, and carrying out repairs as required.
- Ensuring completeness of equipment against packing lists.
- Documenting necessary equipment repairs returned post hire in the form of technical reports.
- Perform technical support duties.
- Other general warehouse duties as required.
Requirements of Role:
· Post-Secondary education in Electrical or Electronic engineering or relevant industry experience.
· Offshore experience in surveying, ROV, or positioning equipment is preferred.
· Excellent computer literacy including hardware knowledge, exposure to networking, Windows operating system, and experience with common Microsoft Office applications.
· Excellent attention to detail and quality.
· Experience with basic electronic working practices such as soldering, making network or data cables and troubleshooting to component level on PCBs.
· Experience with electronic test equipment such as muti meters, insulation tester, pat tester and oscilloscopes.
· Knowledge of data communication protocols such as RS232, UDP/TCP and RS485 would be required.
· Experience with Hydraulic systems, specifically ROV tooling would be considered an asset.
· Experience with tasks such as measuring voltage, testing for insulation and continuity.
· Ability to follow procedures and processes correctly.
· High standard of HSE in the workplace.
· Ability to work as a team taking directions and leading others as required.
· Ability to work independently and confidently when representing the company at client premises.
· Have a flexible approach to working.
· Willingness to undertake independent learning relating to job role.
· Required to be medically fit to obtain offshore certifications.
· Must have a valid Texas driving license.
· Must have right to live and work in the USA.
· Must have a passport.
· Must be willing to travel internationally and work offshore.
Benefits:
- Private medical insurance , including dental and vision
- Wellbeing package such as additional paid leave day per year, enhanced sick pay and lunch and learns.
- Comprehensive, ongoing training and development programmes such as STR Academy
- Bonus plan
- Holiday purchase scheme
- Social events
- Charity/community events
- Service awards
- Competitive salary
Application:
Due to the high volume of applications we receive, only shortlisted candidates will be contacted. If you have not heard from us within four weeks of submitting your application, please consider your application unsuccessful. Thank you for your interest.
Recruitment agencies:
STR will only pay agency fees where a signed agreement is in place and the agency has been instructed by a member of our HR team.
We do not accept speculative or unsolicited CVs from any third party, including recruitment agencies. Any CVs submitted to STR or any of our employees outside of our formal recruitment process, including those sent directly to hiring managers or other employees, will be deemed unsolicited and will not be eligible for any agency fees.
Company Overview
Tata Electronics Pvt. Ltd. is a prominent global player in the electronics manufacturing industry, with fast-emerging capabilities in Electronics Manufacturing Services, Semiconductor Assembly & Test, Semiconductor Foundry, and Design Services. Established in 2020 as a greenfield venture of the Tata Group, the company aims to serve global customers through integrated offerings across a trusted electronics and semiconductor value chain.
Key Responsibilities
- Lead cost engineering initiatives across product lines, developing and maintaining financial models that support pricing, budgeting, and forecasting.
- Analyze factory and operational costs, identifying key drivers such as labor, equipment utilization, materials, overhead, and logistics.
- Partner with cross-functional teams (engineering, supply chain, finance) to align cost strategies with program goals and manufacturing processes.
- Prepare executive-level reports and presentations using Excel and PowerPoint to communicate cost insights, trends, and recommendations.
- Support program management activities including milestone tracking, risk assessment, and cost-performance monitoring across electronic components and manufacturing projects.
Qualifications
- Minimum 2 years of experience in financial analysis, or program management within a manufacturing or technology environment.
- Strong proficiency in Microsoft Excel (pivot tables, charts, formulas) and PowerPoint (executive presentations).
- Experience in electronics, data centers, or automotive sectors is a plus.
- Proven ability to synthesize complex data into actionable insights and communicate effectively with stakeholders.
- Bachelor’s degree in Finance, Accounting, Engineering, or related field; advanced degrees or certifications in supply chain or cost management are a plus.
Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Automation, and Infrastructure. Delta has 171 sales offices, 74 R&D centers and 45 manufacturing facilities worldwide. Delta is a frequent recipient of international awards and related recognition for innovation, design, and continuous dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 11 consecutive years. In 2020, Delta was also recognized by CDP with two “A” leadership level ratings for its substantial contribution to climate change and water security issues and named Supplier Engagement Leader for its continuous development of a sustainable value chain.
Position Purpose:
About the role:
The Infrastructure Account Manager oversees the growth of Delta’s Infrastructure business within the data‑center infrastructure market. This role serves as the primary point of contact for corporate key clients, guiding projects from design through shipment and field service to ensure on‑time delivery and excellent customer experience.
Key responsibilities:
- Achieve revenue targets by managing existing product line and developing new business opportunities.
- Create and develop value propositions based on customer pain points; position Delta as the preferred supplier for UPS and infrastructure solutions.
- Develop deep relationships with customer, contractors, and consultants to increase visibility of opportunities and Delta products.
- Grow market share by enhancing the customer and partner network, monitoring competitor activities, and creating plans to expand the sales pipeline.
- Provide accurate sales forecasts and monthly pipeline reports to factory and business unit owners
Minium Qualifications:
- Bachelor’s degree in business, engineering or a related discipline.
- Minimum 5+ years as an account or sales manager
- “Team Player” attitude; comfortable working with people of various backgrounds and able to integrate into a tight-knit team of exemplary professionals
- Proven experience in sales processes and key‑account management.
- Exceptional communication, organizational and problem‑solving skills; fluency in English will be mandatory
- Advanced proficiency with Microsoft Office (Word, Excel, PowerPoint)
- Experience maintaining CRM system as part of daily activity
Preferred Qualifications:
- Self‑driven, results‑oriented sales able to manage and triage conflicting priorities under tight deadlines.
- Experience working with cross‑functional teams and leading field service or project‑delivery groups.
- Ability to present complex solutions clearly.
- Willingness to travel up to 30% (including overnight stays).
Benefit at Delta Electronics Americas: Life at Delta
EEO Statement:
Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic.
The base salary range for this full-time position is 120,000-160,000 per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.
