Example Harmonic Function Jobs in Usa

PURPOSE AND SCOPE:

The professional registered nurse Inpatient Services RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the kidney disease health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and program operations.

PRINCIPAL DUTIES AND RESPONSIBILITIES:

All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care, policy, procedures, standards of nursing practice, applicable contractual service agreements, state and federal regulations.

· Performs all essential functions under the direction of the Supervisor and with guidance from the Educator, Preceptor or in collaboration with another Registered Nurse.

· Performs ongoing, systematic collection and analysis of patient data pre – during – post treatment for assigned patients and documents in the patient medical record, makes adjustments and modifications to treatment plan as indicated and notifies Supervisor, Physician, patient’s primary nurse and others as may be indicated.

· Assesses, collaborates and documents patient/family’s basic learning needs to provide initial and ongoing education to patients and family.

· Recognizes aspects and implications of patient status that vary from normal and reports to or collaborates with appropriate health team members for input including but not limited to Supervisor, appropriate physician, and the contracted facility primary Nurse.

· Directs and provides safe effective patient care for assigned patients as prescribed for all modality specific treatment procedures.

· Assesses daily assigned patient care needs and collaborates with direct and ancillary patient care staff as needed.

· Initiates and coordinates communication with FKC and Non-FKC dialysis providers and appropriate contracted facility personnel as needed to provide continuity of patient care.

· Performs the implementation, administration, monitoring, and documentation of patient's response to prescribed intradialytic transfusions, including appropriate notification of adverse reactions to physician and appropriate blood supplier.

· Administers medications as prescribed and documents appropriate medical justification and effectiveness.

· Initiates and assists with emergency response measures.

· Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned.

· May be asked to provide specialized nursing care instruction to hospital/facility staff as stipulated contractually.

· May be assigned to assist in an Outpatient facility on an as needed basis.

· Required to complete CAP requirements to advance.

· Performs all other duties as assigned by Supervisor.

PHYSICAL DEMANDS AND WORKING CONDITIONS:

The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

· The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance.

· This position requires frequent, prolonged periods of standing and the employee must be able to bend over.

· The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet.

· The work environment is characteristic of a health care facility with air temperature control and moderate noise levels.

· May be exposed to infectious and contagious diseases/materials.

· May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above.

· Day to day work includes, desk work, computer work, interaction with patients, facility/hospital staff and physicians.

· The position requires travel to training/meeting sites and between assigned facilities.

· Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs.

SUPERVISION:

Assigned oversight of Patient Care Technicians/LVN/LPNs/RNs as a designated Nurse in Charge, after meeting all the following:

· Successful completion of all FKC education and modality specific training requirements for new employees.

· Must have a minimum of 9 months experience as a RN.

· 6 months experience in acute dialysis as a RN.

EDUCATION and LICENSURE:

· Graduate of an accredited School of Nursing.

· Current appropriate state licensure.

· Current or successful completion of CPR BLS Certification

· Must meet the practice requirements in all states in which he or she is employed.

EXPERIENCE AND REQUIRED SKILLS:

· Entry level for RNs with less than 2 years of Nephrology Nursing experience as an RN

· Minimum 9 months experience as a Registered Nurse, 12 months (preferred).

· 6 months acute dialysis experience (preferred)

· Hemodialysis and/or ICU experience (preferred).

ACKNOWLEDGEMENT:

I acknowledge that I have read and accepted this job description. I understand what is expected of me in this position, and I am able to perform the essential functions as outlined with or without reasonable accommodation. Furthermore, I understand that the duties and responsibilities listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. If I have any questions about duties and responsibilities not specified in this job description that I am asked to perform, I should discuss them with my immediate Supervisor or my Human Resources representative

Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws.

EOE, disability/veterans

Business Overview

KINESSO is the technology-driven performance marketing agency providing actionable growth for both our agency partners and clients. We turn 'action' into 'outcome' for our clients, leveraging our unique capabilities in optimization, analytics, AI, and experimentation. KINESSO has brought together the collective power of what was formerly Matterkind, Reprise, P3, and Kinesso under one collective entity that will serve as the most powerful delivery engine in the industry. We have extensive offerings spanning across performance marketing and data and technology. Fueled by a deep understanding of consumer behavior, we offer an end-to-end engine of planning and optimization while also delivering on data-driven strategy for social platforms, actionable growth in e-commerce, and creating curated marketplaces specific to each client's function and needs. The company has more than 6,000 employees operating in more than 60 countries. Learn more at Summary

We are looking for you - dynamic, best-in-class talent - to join the growing Commerce team as a Senior Associate. In this role you will support in the development, planning, buying, executing and measuring media plans for designated shopper/commerce media clients. As a Senior Associate, you will create, innovate, and guide Commerce planning and buying processes. You'll work closely with national Planning and Buying teams to allow for holistic Commerce media function.

The Commerce team is a specialty group that focuses on the planning, buying, execution and measurement of Commerce media. Commerce media is any specific media elements that are retailer focused/tagged. This can be in-store signage such as a coupon machine or shelfblade, a billboard driving shoppers to a Walmart store, digital ads (search, display, OLV/STV, etc) on Amazon or site via managed or self service, tapping influencers that support certain retailers or working with shoppable technology companies to ensure ease of conversion. The team supports client's commerce/shopper/customer marketing teams-our end goal measuring product sales both online and in-store.

Who You Are

Enthusiastic about media with a desire to learn and build knowledge across all aspects of commerce inclusive of retail media networks, programmatic media, instore, shoppable tech and more. You thrive in a fast paced and fun environment. You're ready to level up your career in media and are excited to partner with some of the world's leading consumer brands.

Responsibilities

Media Knowledge

o Knowledge of media channels (e.g. display, OLV, STV, instore, OOH, etc.) and/or retail media networks & their platforms

o Familiar with both DSP interface functionality and levers (campaign hierarchy, audience builder, PMP/PG set up, reporting suite) as well as managed service dashboards

o Preliminary understanding of individual RMN capabilities across tactic, targeting, reporting methodology, etc.

* Account Management & Strategy

o Supports Manager in development, presentation, management and measurement of omnichannel commerce media programs

o Leads RFP and negotiation process for managed service campaigns ensuring previous learnings are applied

o Assists in building audience targeting details and budget allocation at the tactic/placement level based on client goals for either self service or with partners during the RFP process

o Takes learnings from previous campaigns and apply to next campaign

o Hosts kick off calls for new campaign launches with partners and/or DSP activation team ensuring client approved strategy is reflected accurately in self service platform

o Supports in identification of growth opportunities and shares ideas for potential test and learns

o Takes lead on managing vendor communications and delivers client communications where appropriate

o Contributes to building an effective detailed media plan, inclusive of tactics, audiences, flighting, KPIs, etc. that drives client performance

o Input and manage plans within MediaTools where applicable

o Supports in the creation of client ready materials (e.g. presentations, reporting, etc.)

o Maintain detailed files of all pertinent records (latest media plans, performance reports, etc.) relevant to clients' business

o Responsible for owning any status documents and timelines whether internal or client facing

o Responsible for accurate meeting minutes and recaps/next steps where appropriate

o Demonstration of knowledge of outstanding deliverables on the team agenda

o Day to day lead for billing and responsible for actualizing and clearing invoices

* Execution

o Involved in the buying process and stewardship for media programs to ensure original objectives are being met

* Managed service: works with partners to maintain campaign and optimize based on performance, monitors within partner dashboards where applicable

* Self service: works with DSP activation team to ensure relevant strategies are implemented and campaigns are optimized based on performance, monitors within platform

* Works with retailers and DSP partners to ensure proper data onboarding and any necessary paperwork is completed prior to campaign launch

o Responsible for locating, determining, and building relevant audience segments in DSP platforms

o Manages coordination of creative assets between client, creative agencies and partners

o Owns accurately entering IOs into Prisma and building Trafficking sheets

o Become proficient with 3rd party ad-serving and site served placements, tracking & analytic systems to be able to accurately input media plan details and launch campaigns

o Monitors pacing to ensure delivery is appropriate and aligned to campaign flighting for both managed and self-service campaigns

o Measures media performance at all stages to ensure original objectives and strategies are being met to client satisfaction

o Analyzes and reports data on daily/weekly/bi-weekly/monthly & ad-hoc basis

* Data may be provided from partners or DSP activation team, with self service data being reviewed more frequently

* Turns insights into long-term action by highlighting clear flow of cause, effect and next steps

o Demonstrates ability to use historical data or vendor relationships to create benchmarks for current campaign performance

o Maintains client and industry benchmarks for point of comparison when evaluating campaign performance

* Relationships

o Day to day lead with media partners across communication and scheduling of meetings

o Works cross-functionally with national planning & investment, ad operations, product, reporting, analytics, finance and other groups across the account

o Active participants in key vendor meetings ultimately sending recaps/notes for the full team

o Mentor Associates and provide opportunities for continued growth

* Training/Development

o Participation in trainings and proactive communication around areas of needed/desired growth for self and Associate

o Proactive idea sharing with internal team

* Industry Knowledge

o Seeks out information to remain current on media trends and shares with team members with relevant implications/potential opportunities

o Familiarity with client business objectives and connections to our day-to-day work

Required Skills & Experience

* Working knowledge of commerce industry and platforms including major retailers and supporting technology (e.g. Amazon Ads, Walmart Connect, Roundel, Pacvue, Skai, Criteo, TTD, etc.)

* Agency and/or Commerce media

* Project management; effectively managing multiple projects and meeting tight deadlines under a fast-paced environment.

* Process oriented and organized, with the ability to juggle many tasks at one time. Time management skills are critical

Desired Skills & Experience

* Bachelor's degree or equivalent experience

* 1+ years of ecommerce experience preferred

* Excellent written and verbal communication skills and proven problem solving ability

* Self- sufficient and proactive

* Comfortable in managing up across task progress, campaign performance and team needs

* Proficient in Microsoft Office (Excel, PowerPoint, etc.)

* Knowledge with industry tools such as MediaTools, Prisma, etc

Wage and Benefits

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family. The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

Employment Transparency

It is the policy of our company to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position, please .

Salary Range$70,000—$75,000 USD

Position:

Controls Technician II

Location:

19775 Belmont Executive Plaza

Suite 200

Ashburn, VA

Job Id:

923

# of Openings:

1

TITLE: CONTROLS TECHNICIAN II

LOCATION: Ashburn, VA

POSITION SUMMARY:

Controls Technicians monitor the control systems of automated equipment. They use software to verify that the controls are within certain parameters and work to quickly troubleshoot problems when they arise to avoid or minimize interruptions to production. The Controls Technicians II works under general supervision, independently performing the essential functions at an advanced level.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

* Responsible for providing an advanced level of expertise in maintaining, troubleshooting, and servicing all aspects of the building automation systems.

* Must have the ability to maintain, improve, and participate in troubleshooting HVAC equipment serving throughout mission critical facilities.

* Install, configure, test and maintain application software and system management tools

* Oversight and hands-on troubleshooting experience with electrical and mechanical systems are desired, across the spectrum of technologies that support continuous operations.

* Basic writing and verbal skills are required. Effectively communicate with the site management team and the customer to understand requirements and solve complex facility system problems.

* An understanding or ability to quickly learn electrical and mechanical systems along with prior experience with facilities system troubleshooting is highly desirable.

* This position may collaborate with other specialized technicians, mechanics or subcontractors to perform facility-related maintenance and repairs.

* Provides instruction, mentors and trains less skilled technicians as needed.

* Mechanical and Electrical systems oversight, oversee and monitor all components of the site infrastructure to ensure operational integrity.

* Participate in test & commissioning phases of construction for validation of programming

* Perform data integration of equipment utilizing various field protocols (BACnet, Modbus, etc.)

* Monitor's suppliers and third-party vendors as required

* Communicate with remote and local supporting personnel via email and telephone

* Demonstrates attention to detail, good comprehensive and analytical skills, and excellent organizational skills.

* Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tag-out procedures.

* Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work.

* Other duties as assigned by Manager or Supervisor.

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education/Experience:

* High school diploma or demonstrated equivalent.

* Five years of experience performing Control System / Building Automation/Management System service and repair in a data center, heavy industrial, or pharmaceutical/biomedical environment, or demonstrated equivalent combination of education and experience.

* Knowledge of data center infrastructure including related HVAC and electrical equipment.

* Preferred experience with Tridium Niagara (AX/N4) or other systems such as ALC, Honeywell, Schneider Electric and Siemens and associated instrumentation.

* Experience troubleshooting Control Systems, BAS/BMS systems including but not limited to (Automated Logic, Honeywell, Siemens, Edstrom, etc.)

* Possess knowledge of Building Systems sequence of operations

* Experience diagnosing, troubleshooting and repairing process mechanical systems

* MUST BE A US CITIZEN

Computer Skills:

* Proficient knowledge of Microsoft Office and software

Certificates and Licenses:

* No certificates or licenses required

Supervisory Responsibilities:

* No supervisory responsibilities

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

* While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.

The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

Pay Range: $65,013 - $97,580 per year

Apply for this Position

Apply

Description

For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future.

Prepress Operator

SHIFT: 1st/2nd Rotating

SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All of these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Actively participate and embrace in the STOP Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
• Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
• Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
• Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
• Detect, report, and resolve all missing or substandard machine parts.
• Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
• Coordinate with Mounting Dept with respect to the production schedule and the staging of jobs. *Applies to Story City, IA COE
• Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
• Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. *Applies to Roto COE.
• Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. *Applies to Roto COE.
• Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
• Operate daily a core cutter to produce accurate size cores for each scheduled print job.
• Complete required reports and paperwork. Use a computer terminal.
• Perform required cleaning tasks - some daily, weekly or monthly requirements.
• Obtain Power Industrial Truck license(s).
• Effectively communicate with coworkers throughout all shifts.
• Attend and participate in all company mandated meetings.
• Business travel may be required.
• Any other duties as assigned.

Requirements

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Job Description

The City of Renton is recruiting for a Civil Engineer at the 1 or 2 level to join the Surface Water Engineering section. This is an exciting opportunity to work on projects that improve drainage, reduce stormwater pollutant discharge to creeks, and improving fish habitat. These projects improve public safety and the natural environment of our growing city. Work will consist of delivering design and construction of small- to mid-scale stormwater projects, providing technical reviews for consultants, coordinating with the public and other city departments, and supporting senior engineers on large-scale complex projects. The candidate will have excellent communication and problem-solving skills as well as experience or interest in stormwater management. The selected candidate would be hired in a Civil Engineer 1 or Civil Engineer 2 depending on their qualification and experience.

Working for the City of Renton comes with an excellent

benefits package, including:

• Deferred compensation with the City contributing 3% of the employee's salary.
• VEBA Plan with the City contributing 1% of the employee's salary.
• Medical, dental, vision and life insurance at affordable rates
• Paid leave for vacation, sick, eleven holidays and two "personal" holidays a year
• State of Washington Department of Retirement Systems Public Employee Retirement Systems (PERS) plan enrollment

Salary placement depends on the education, experience, and skill set of the incumbent.

Annual Salary Civil Engineer 1: $102,264 - $124,632

Annual Salary Civil Engineer 2: $112,920 - $137,448

Essential Functions for Civil Engineer 1 and 2

• Participate in the selection of consultants, negotiate consultant agreements, monitor consultant progress and expenditures, manage contract, and provide technical directions to consultants; oversee the work produced by consultants to ensure that consultant deliverables are of high quality, meet the objectives of the project, and conform to applicable standards and regulations.
• Provide project coordination between city project team members, other city departments, outside agencies and other external stakeholders to ensure needs are being met by proposed designs and specifications; ensure proper communication at key intervals.
• Participate in public outreach and community involvement efforts. Compile, review, and/or present information and other materials to City Council and the public.
• Develop, recommend, and update city design standard plans, specifications, ordinances, and operating procedures.
• Represent the department and act as spokesperson on various committees, as assigned, before the public, elected officials, committees, and commissions. When needed, would act as liaison with staff, other departments, agencies, and community groups in the coordination of projects and development of policy.
• Support the implementation of major City policies, including research and provide recommendations as well as administers and maintains agreements and contracts with public agencies and private organizations.
• Contribute to an environment of teamwork and respect.
• Foster a culture of equity and inclusion by recognizing the diverse needs and perspectives of groups and individuals.
• Remain current with relevant technological advancements as it relates to field.
• Maintain regular, reliable, and punctual attendance.,
• Perform related duties as assigned.
• May be assigned to support critical city priorities during emergencies.

In Addition to the above ESSENTIAL FUNCTIONS for Civil Engineer 1 and 2 the Civil Engineer 1 also includes:

• Design small-scale capital construction, transportation, and utility projects; prepare and/or review plans, specifications, cost estimates, and final construction contract bid documents.
• Provide support to acquire required city, county, state, and federal project permits, including state and federal environmental documentation and approvals.
• Provide technical engineering support to project construction team; facilitate communications with the Engineer of Record, and adjacent property and business owners.
• Review architectural and engineering plans and drawings for construction projects ensure compliance with City ordinances and policies with guidance from supervisor or assigned team member; approve plans or indicate deficiencies with corrective action guidelines for small-scale actions or projects.
• Prepare, compile, and analyze calculations and/or statistical and technical information involving assigned engineering specialty including utilities, construction, transportation, and others; review calculations, analyses, and designs of others to ensure conformance with City engineering standards and/or to inform decision making.
• Participate in large-scale engineering plans and studies utilizing staff from within the city or outside consultants as necessary.
• Provide technical support for the management of project grants.
• Assist in the delivery of multiple projects according to goals and expectations set by the associated grants, elected officials, and the public; support project management duties such as developing and monitoring project scope, schedule and budget; coordinates and oversees project teams; develop performance metrics.

In Addition to the above ESSENTIAL FUNCTIONS for Civil Engineer 1 and 2 the Civil Engineer 2 Essential Functions also includes:

• Assist in the management and/or participate in large-scale engineering plans and studies utilizing staff from within the City or outside consultants as necessary; develop timelines, specifications and project objectives; monitor progress and provide periodic reports regarding assigned projects.
• Provide technical support and assist in management of project grants.
• Manage the delivery of multiple small and/or midscale projects according to goals and expectations set by the associated grants, elected officials, and the public; perform project management duties such as developing and monitoring project scope, schedule and budget; coordinates and oversees project teams; develop performance metrics.
• Lead design teams and/or design capital construction, transportation, and utility projects; prepare and/or review plans, specifications, costs estimates, and final construction contract bid documents for small and mid-scale projects and assist with large-scale projects.
• Coordinate the negotiation and acquisition of required property rights.
• Acquire and/or lead effort required city, county, and state permits, including state environmental documentation and approvals; support acquisition of federal project permits including preparation of federal environmental documentation.
• Provide technical engineering support to project construction team; facilitate communications with the Engineer of Record, and adjacent property and business owners; and assist in managing project budget.
• Review architectural and engineering plans and drawings for construction projects ensure compliance with City ordinances and policies; approve plans or indicate deficiencies with corrective action guidelines.
• Prepare, compile, and analyze complex calculations and/or statistical and technical information involving assigned engineering specialty including utilities, construction, transportation and others; review calculations, analyses, and designs of others to ensure conformance with City engineering standards and/or to inform decision making.

To view a complete job description, click Class Specifications | Civil Engineer 1 | Class Spec Details or Class Specifications | Civil Engineer 2 | Class Spec Details

Civil Engineer 1 EDUCATION, EXPERIENCE, AND LICENSE REQUIREMENTS:

• Bachelor's degree in Civil Engineering or related field.
• Or minimum 4 years of relevant education and experience
• Valid driver's license.
• Successful passing of a required background check.
• Successful passing of a required driving record check.

Civil Engineer 2 EDUCATION, EXPERIENCE, AND LICENSE REQUIREMENTS:

• Bachelor's degree in Civil Engineering or related field.
• Minimum 2 years of civil engineering experience.
• Or minimum 6 years of relevant education and experience.
• Valid driver's license.
• Successful passing of a required background check.
• Successful passing of a required driving record check.

PHYSICAL DEMANDS:

• Drive to offsite locations to perform essential functions.
• Moving throughout City facilities and buildings.
• Operate a computer and other office equipment.
• Communicate with City employees and residents.
• Lift or move items weighing up to 10 pounds on occasion.

WORK ENVIRONMENT:

• Work is performed in an office environment, and outdoors in all weather conditions occasionally.
• Exposure to high voltage wires, hazardous materials, heights, and noise from equipment.
• Noise level out in the field is moderately loud and noise level in the office is moderately quiet.
• Work evening and/or weekend hours as needed.
• Night meetings may be required.

Approved reasonable accommodation requests will be made to enable individuals with disabilities to perform the essential functions of the job.

Telework Program

The City of Renton supports workers performing in a hybrid capacity (partial telework/in-office) where job responsibilities can be performed remotely. This position may be eligible for a telework arrangement, up to 2 days remote, based on the operational needs of the City and specific Department. Regardless of job title or telework arrangement, City of Renton employees must reside in Washington State and within a reasonable distance to their worksite to respond to workplace reporting requirements.

Accommodation

Individuals needing accommodation in the application, testing, or interview process may contact at least 2 days prior to the need.

Selection Procedure

Please consider visiting the City of Renton's Career Center for more information about our hiring process, benefits and other useful information. The City of Renton embraces a diverse and inclusive workforce and prides itself on promoting collaboration and teamwork in a positive environment while providing high quality services to the community. For more information about the City of Renton, please visit the following website: Why Renton

The City has adopted an anonymous application process that prevents hiring managers from seeing personal identifiers, including candidates' names, addresses, and other similar information. This eliminates the possibility of unintentional or implicit bias during the screening of applications. For that reason, you will not have the ability to attach any documents to your application, including a cover letter or resume. Please make sure to submit a complete, detailed, and updated job application.

Communication from the City of Renton:

We primarily communicate via e-mail during the application process. E-mails from and/or should be placed on your safe domain list to ensure you receive notifications in a timely manner. As a precaution, you may also want to check your junk e-mail folders. We also communicate via text and encourage you to sign up for text alerts when completing your job application.

Recruitment Process:

The screening process will include a review of minimum qualifications and applicants selected for an interview will be invited via email to self-schedule a time through the Government Jobs account. At minimum, this position will be subject to a standard criminal background check and professional reference check. This position requires driving and is also subject to a driving record check from the WA State Dept of Licensing (or other state equivalent). Driving records will be evaluated based on a points system depending on the infraction and severity.

REQUIREMENTS AND PREFERENCES

The Aviation Department which operates the Fort Lauderdale-Hollywood International Airport (FLL) and the North Perry Airport (HWO) is seeking qualified applicants for the position of PLUMBER.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME

2026 Benefits of Broward County Employment

High Deductible Health Plan - bi-weekly premiums:

Single $10.90 / Family $80.79

Includes a County Funded Health Savings Account of up to $2000 Annually

Consumer Driven Health Plan - bi-weekly premiums:

Single $82.58 / Family $286.79

Florida Retirement System (FRS) - Pension or Investment Plan

457 Deferred Compensation Employee Match

Eleven (11) paid holidays each year

Vacation (Paid Time Off) = 2 weeks per year

Up to 40 hours of Job Basis Leave for eligible positions

Tuition Reimbursement (Up to 2K annually)

Paid Parental Leave

**MUST BE ABLE TO WORK NIGHTS, HOLIDAYS AND WEEKENDS**
All Aviation Department employees must possess the ability to interact courteously with the public, Airport vendors, contractors and fellow employees to maintain a professional work atmosphere by acting and communicating in a manner that promotes a positive work environment.
General Description

Performs a variety of journey level plumbing and related maintenance and repair work.

Works under general supervision, independently developing work methods and sequences.

Minimum Education and Experience Requirements

Requires two (2) years in maintenance plumbing or closely related experience.

Special Certifications and Licenses

Possess and maintain a valid Florida Class E Driver's License based on area of assignment.

Preference

• Associate's Degree or higher in relevant field
• Backflow Preventer (Tester/Repairer) Certification
• 1+ years Maximo/Work Order System Experience
• 1+ years Aircraft Potable Water Cabinet Experience

Candidates selected for interviews may be required to demonstrate their ability to operate various equipment utilized by the Aviation Department. All candidates must complete an extensive ten (10) year work history verification and criminal background check, including fingerprinting.

Per the Code of Federal Regulations, Title 49, Part 1542, all airport employees must undergo a Criminal History Records Check (CHRC) and a Security Threat Assessment (STA) in order to obtain a Security Identification Display Area (SIDA) Badge, as required by the Transportation Security Administration (TSA).

Ability to obtain and maintain Airfield driving privileges for movement and non-movement areas. The Aviation Department operates under a Drug-Free Workplace Policy in compliance with the provisions of the Federal Drug-Free Workplace Act of 1988.

SCOPE OF WORK

Duties and Responsibilities

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Inspects public restrooms in order to ensure that fixtures are working properly and/or identify non-working fixtures; replaces broken fixtures, valves, pumps, controllers, and/or irrigation heads in order to restore restroom, lift station, or irrigation system functionality.

Troubleshoots non-working fixtures, valves, irrigation systems, and/or lift station pumps in order to identify the nature of the problem and type of repair needed.

Inspects irrigation systems and lift stations in order to ensure that pumps/systems are working properly and identify non-working pumps/systems; repairs a variety of plumbing fixtures, valves, lift stations, pumps, and irrigation components in order to restore fixtures, valves, lift stations, and irrigation systems to proper working condition and minimize replacement costs.

Performs routine maintenance on waste system lines, lift stations, and/or irrigation systems in order to ensure that systems are functioning properly.

Cuts opening in walls for pipes; bends pipes over blocks by hand; cuts, reams, and threads pipe; digs trenches or holes with necessary equipment; installs, maintains, and repairs water circulation and irrigation systems, valves, faucets, traps, sinks, wash bowls, sewers, vents, and other sanitary fixtures.

Installs and maintains PVC pipe systems by opening clogged drains with a plunger or other devices; replaces washers on leaky faucets; tests for leaks by filling pipe with water under pressure and checking with a gauge for fall pressure.

Installs pipe and hose on spray trucks, and other specially designed equipment and apparatus.

Repairs, replaces, and checks high and low pressure steam boilers; blows down and flushes boilers; checks all safety devices and controls, replacing and repairing when needed; flushes and cleans boilers, storage and return tanks, hot water heaters, and similar apparatus.

Makes estimates of time and materials; supervises the work of helpers assisting in various phases of the work; interacts with the public in order to answer questions, identify their service needs, or locate missing materials.

Performs related work as assigned.

ADDITIONAL DUTIES & RESPONSIBILITIES:
Inspects public restrooms in order to ensure that fixtures are working properly and/or identify non-working fixtures; replaces broken fixtures, valves, pumps, controllers, and/or irrigation heads in order to restore restroom, lift station, or irrigation system functionality.

Troubleshoots non-working fixtures, valves, irrigation systems, and/or lift station pumps in order to identify the nature of the problem and type of repair needed.

Inspects irrigation systems and lift stations in order to ensure that pumps/systems are working properly and identify non-working pumps/systems; repairs a variety of plumbing fixtures, valves, lift station/swimming pool pumps, and irrigation components in order to restore fixtures, valves, lift stations, aircraft potable water reel units and irrigation systems to proper working condition and minimize replacement costs.

Performs routine maintenance on waste system lines, lift stations, and/or irrigation systems in order to ensure that systems are functioning properly.

Cuts opening in walls for pipes; bends pipes over blocks by hand; cuts, reams, and threads pipe; digs trenches or holes with necessary equipment; installs, maintains, and repairs water circulation and irrigation systems, valves, faucets, traps, sinks, wash bowls, sewers, vents, and other sanitary fixtures.

Installs and maintains PVC pipe systems by opening clogged drains with a plunger or other devices; replaces washers on leaky faucets; tests for leaks by filling pipe with water under pressure and checking with a gauge for fall pressure.

Makes estimates of time and materials; supervises the work of helpers assisting in various phases of the work; interacts with the public in order to answer questions, identify their service needs, or locate missing materials.

Competencies

• Manages Complexity:Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Looks at complex issues from multiple angles; explores issues to uncover underlying issues and root causes; sees the main consequences and implications of different options.
• Action Oriented:Takes on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Takes timely action on important or difficult issues. Identifies and pursues new opportunities that benefit the organization.
• Plans and Aligns:Plans and prioritizes work to meet commitments aligned with organizational goals. Outlines clear plans that put actions in a logical sequence; conveys some time frames. Aligns own work with relevant workgroups. Takes some steps to reduce bottlenecks and speed up the work.
• Optimizes Work Processes:Knows the most effective and efficient processes to get things done, with a focus on continuous improvement. Generally follows defined and communicated standards, methods, and procedures. Seeks advice and finds ways to work better within processes. Makes some reasonable suggestions to improve work methods.
• Ensures Accountability:Holds self and others accountable to meet commitments. Accepts responsibility for own work, both successes and failures. Handles fair share and does not make excuses for problems. Usually meets commitments to others.
• Drives Results:Consistently achieves results, even under tough circumstances. Holds self to high standards of performance; sets some challenging goals; wants to achieve meaningful results; pursues initiatives/efforts to successful completion and closure. Focuses on key goals, even during setbacks and obstacles.

WORK ENVIRONMENT

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs medium work that involves walking, standing, stooping, stretching, or lifting all of the time and also involves exerting between 20 and 50 pounds of force on a regular and recurring basis or exceptional skill, adeptness, and speed in the use of fingers, hands, or limbs in tasks involving very close tolerances or limits of accuracy.

Unavoidable Hazards (Work Environment)

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to toxic/caustic chemicals.

SPECIAL INFORMATION

County Core Values

All Broward County employees strive to demonstrate the County's four core behavioral competencies.

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED

Americans with Disabilities Act (ADA) Compliance

Broward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.

County-wide Emergency Responsibilities

Note: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.

County-wide Employee Responsibilities

All Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.

All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.

Position Summary

Lead position that requires multi-certification and disciplines necessary to handle project approvals from start to finish through the plan review and inspection processes in accordance with the Division's mission and performance objectives.

Direct and lead Building Inspector/Plans Examiners and seasonal/casual staff. Assist the Division Manager and Building Official with program planning and personnel direction. Oversee the coordination of the building safety plan review and inspection process. Conduct construction code reviews and inspections for residential, commercial, industrial and multi-family development proposals. Depending on the Division's needs, employees in this position may be assigned to focus primarily on plan review or inspection duties. This program is highly visible and often the first contact made with the City from those outside the community. These tasks are illustrative only and may include other related duties.

This recruitment is accepting applications for
Building Inspector/Plans Examiner III
Building Inspector/Plans Examiner IV (Plan Review Lead)

Full-Time 40 hours per week

AFSCME-represented positions

12-month probationary period

Must meet all qualifications and requirements as listed in the position description below.

Building Inspector/Plans Examiner III $38.25 - 48.66 Hourly

Building Inspector/Plans Examiner IV (Plan Review Lead) $41.27 - $52.51 Hourly

These positions are anticipated to be assigned primarily to commercial and residential plan review.

Essential Duties

Building Inspector/Plans Examiner III
Leads and coordinates members of the development review and inspection teams to ensure a timely, predictable, comprehensive and accurate plan review and inspection process for any development proposal.

Reviews and inspects residential, commercial, industrial, and multi-family development proposals to ensure compliance with State and City codes/ordinances, engineering/architectural, and fire/life safety principles.

Depending on the Division's needs, performs construction plan review and site inspections:

• Conducts Pre-Development, Plan Intake, and Pre-Construction meetings.
• Takes the lead in coordinating plan reviews and inspections internally, with customers, and with other departments and agencies.
• Maintains communication with contractors to anticipate and resolve onsite issues.
• Performs building safety inspections and plan reviews.
• Calculates and assesses fees.
• Monitors permit and project status and follow-up with expired applications and permits.
• Maintains accurate records and files of construction plan reviews, inspections, and related correspondence. Archives documents as required.
• Manages phased development and deferred submittal process for assigned projects.
• Ensures special inspection and structural observation is accomplished where required.
• Recommends or issues Stop Work Orders, violation notifications, and other building code compliance actions when necessary.
• Issues final approval of construction permits.

Meets Division expectations, responds to telephone and personal contacts from contractors, architects, engineers and the public on issues related to codes and standards associated with development proposals in a timely manner.

Provides technical interpretations of code issues and requirements.

Leads and coordinates teams to investigate and resolve matters of community concern, public health, building safety and dangerous building situations. Examples include fire scene investigations, flooding, mold growth, post-earthquake inspections, electrical hazards, hazardous materials, boiler explosions, sanitation issues, mechanical failures, and any condition identified in the Dangerous Building Code.

Represents the City at national, state and local boards, meetings, hearings, seminars, classes, and public
outreach events involving construction codes or building safety.

Provides training, support and assistance to cross-trained staff, and participates in cross-training programs.

Conducts compliance verifications for appropriate contractor licensing and registration.

Acts ethically and honestly; applies ethical standards of behavior to daily work activities and interactions. Builds confidence in the City through own actions.

Conforms with all safety rules and performs work is a safe manner.

Operates a motor vehicle safely and legally.

Delivers excellent customer service to diverse audiences.

Maintains effective work relationships.

Adheres to all City and Department policies.

Arrives to work, meetings, and other work-related functions on time and maintains regular job attendance.

Building Inspector/Plans Examiner IV (Plan Review Lead)
Assists with and prepares short and long range work plans, and schedules daily activities for Building Inspector/Plans Examiners.

Directs, trains and assists Building Inspector/Plans Examiners. Participates in recruitment process. Provides input concerning performance evaluations.

Performs Construction Plan Reviews and Inspections on complex residential, commercial, industrial, and multi-family development proposals to ensure compliance with State and City codes/ordinances, engineering/architectural, and fire/life safety principles.

Coordinates scheduling and organization of Pre-Development and Pre-Construction and other related meetings. Coordinates review/inspection approvals with internal/external agencies.

Coordinates Over-the-Counter, Rapid Review, and other processes. Ensures adequate staffing and oversight of a timely, predictable, comprehensive, and accurate plan review and inspection process for any development proposal.

Monitors and inspects work and projects completed by Building Inspector/Plans Examiners and contractors. Makes field decisions on procedures and methods.

Conducts quality control and internal audits for building safety code administration and enforcement.

Assists in budget preparation. Monitors expenses. Maintains staff supplies and resources.

Provides technical expertise and guidance in interpretations of code issues and requirements for development proposals.

Leads, guides, and ensures successful staff resolution of matters of community concern, public health, building safety and dangerous building situations. Examples include fire scene investigations, flooding, mold growth, post-earthquake inspections, electrical hazards, hazardous materials, boiler explosions, sanitation issues, mechanical failures, and any condition identified in the Dangerous Building Code. When necessary, issue notices of violation, notices to vacate, dangerous building declarations and stop work orders.

Represents the City at national, state and local boards, meetings, hearings, seminars, classes, and public outreach events involving development, construction codes or building safety.

Conforms with all safety rules and performs work is a safe manner.

Operates and drives a motor vehicle safely and legally.

Delivers excellent customer service to diverse audiences.

Maintains effective work relationships.

Adheres to all City and Department policies.

Arrives to work, meetings, and other work-related functions on time and maintains regular job attendance.

Qualifications and Skills

Building Inspector/Plans Examiner III

Education and Experience
High school diploma, or equivalent required. Associates degree in Building Inspection Technology, Drafting, Engineering, Fire Prevention, or other related field preferred.

Four years of formal education, training, and/or experience in construction management, architecture, structural engineering, building design, construction inspection, and/or plan review providing the knowledge, skills and abilities necessary to perform the essential functions of the position.

Knowledge, Skills and Abilities
Thorough knowledge of construction practices, engineering concepts, and architectural principles.

Excellent customer service, communication, and public relations skills and the ability to mediate adversarial situations. Ability to proactively anticipate and mitigate problem areas before they become issues.

Prioritize and meet multiple demands by the construction industry, the general public and other City staff.

Organize, coordinate, chair, and effectively facilitate high profile meetings.

Interpret, disseminate, and communicate complex technical information, state and local construction regulations, City review process, and City policies effectively with technicians and non-technicians.

Possess a self-directed commitment to maintain current knowledge of construction standards, methods, technologies, and codes.

Get along well and maintain effective work relationships with coworkers and the public.

Special Requirements

Certifications: Incumbent must be certified in accordance with OAR 918-098. Oregon Inspector Certification is required within 60 days of appointment.

Certifications giving the incumbent the legal ability to perform work described in sets A, B, C, or D:

A: Inspection/Plan Review:
Commercial Inspection (A-Level Building, Mechanical)
Residential Inspection (Building , Mechanical)
Residential Plan Review
Commercial Plan Review (A-Level, Mechanical) must be obtained within the probationary period.
OR
B: Residential Multi-Discipline:
Residential Plan Review
Residential Inspection for 4: Building, Mechanical, Plumbing and Electrical
OR
C: Commercial Plan Review:
Commercial Plan Review (A-level, Mechanical)
Fire and Life Safety
Residential Plan Review and Residential Inspection required within the probationary period
D: Specialty Discipline- Commercial and Residential Inspection and Plan Review to include:

• Plumbing - Commercial and Residential Plumbing Inspector; obtain a Medical Gas Certification within the probationary period; or
• Electrical - Commercial and Residential Electrical Inspector; obtain a Fire Investigation Certificate within the probationary period.

Experience in use of permit tracking systems. Excellent ability to use computer hardware, printers, and computer programs to conduct inspections, complete plan reviews, communicate and present information, track progress, schedule projects, and to perform the essential functions of the position. Demonstrable commitment to quality and timely customer service.

Possession or ability to obtain a valid Oregon Drivers License.

Demonstrable commitment to sustainability.

Demonstrable commitment to promoting and enhancing equity, diversity and inclusion.

The individual shall not pose a direct threat to the health or safety of the individual or others in the workplace.

Building Inspector/Plans Examiner IV (Plan Review Lead)

Education and Experience
High school diploma, or equivalent required. Bachelor's degree in Architecture, Engineering, Construction Management, Public Administration or a closely related field preferred. Two years of experience in construction management, architecture, structural engineering, building design, construction inspection, and/or plan review.

Six years of formal education, training and/or experience in construction management, architecture, structural engineering, building design, construction inspection, and/or plan review providing the knowledge, skills and abilities necessary to perform the essential functions of the position.

Knowledge, Skills and Abilities
Thorough knowledge of construction practices, engineering concepts, and architectural principles.

Excellent customer service, communication, and public relations skills and the ability to mediate adversarial situations, and proactively anticipate and mitigate problem areas before they become issues.

Prioritize and meet multiple demands by the construction industry, the general public and other City staff.

Organize, coordinate, chair, and effectively facilitate high profile meetings.

Travel among City worksites, off-site meetings and presentations.

Interpret, disseminate, and communicate complex technical information, state and local construction regulations, City review process, and City policies effectively with technicians and non-technicians.

Experience in use of permit tracking systems. Excellent ability to use computer hardware, printers, and computer programs to conduct inspections, complete plan reviews, communicate and present information, track progress, schedule projects, and to perform the essential functions of the position.

Get along well and maintain effective work relationships with coworkers and the public.

Demonstrable commitment to quality and timely customer service.

Special Requirements
Certifications: Incumbent must be certified in accordance with OAR 918-098. Oregon Inspector Certification is required within 60 days of appointment.

State of Oregon Building Official Certification; or State of Oregon Inspector Certification and International Code Council Certified Building Official Certification, must be obtained within the probationary period.

Certifications giving the incumbent the legal ability to perform work described in sets A, B, or C:
A: Inspection/Plan Review:
Commercial Inspection (A-Level Building, Mechanical)
Commercial Plan Review (A-Level, Mechanical, Fire and Life Safety)
Residential Inspection (Building , Mechanical)
Residential Plan Review
OR
B: Residential Multi-Discipline:
Residential Plan Review
Residential Inspection for 4: Building, Mechanical, Plumbing and Electrical

OR
C: Specialty Discipline - Commercial and Residential Inspection and Plan Review to include:

• Plumbing - Commercial and Residential Plumbing Inspector plus obtain a Medical Gas Certification within the probationary period; or
• Electrical - Commercial and Residential Electrical Inspector plus obtain a Fire Investigation Certificate within the probationary period.

Demonstrable understanding and commitment to sustainability; promote commitment, understanding and use of sustainability principles by employees for day to day operations.

Demonstrable commitment to diversity and promote diversity principles with employees in day to day operations.

The individual shall not pose a direct threat to the health or safety of the individual or others in the workplace.

Ability to pass a background check and/or criminal history check

Possession or ability to obtain a valid Oregon Drivers License.

How to Apply

Qualified applicants must submit an online application located on the City of Corvallis website(click on "Apply" above).

Position is open until filled.

First review of applications will occur after 8:00 AM on Friday March 6, 2026.

Resumes will not be accepted in lieu of a completed online application.

Late or incomplete applications will not be accepted/considered.

*Please do not include personal or protected information in attached resumes or cover letters, this includes your birth date, age, dates of education, and graduation dates.*

Apply

Description

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Columbus, WI

SUMMARY: Directs and coordinates customer service activities for the Assigned COE.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Manager Customer Service function.
• Accomplishes objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling and disciplining employees
• Communicating job expectations
• Planning, monitoring and reviewing job contributions
• Enforcing policies and procedures
• Manage customer service issues, including terms of sale.
• Monitors inventory so aged material can be shipped or pre-billed
• Provides input for Customer Service Representative performance reviews.
• Manages Expedited freight
• Solve problems, analyze situations/behaviors and prioritize responsibilities.
• Handle complex and escalated customer service issues and follows through to resolution.
• Improving customer service experience, created engaged customers and facilitate organic growth.
• Corresponds with company sales force as needed to address customer issues.
• Provides training for the Customer Service Representative Positions and updates training documents as appropriate.
• Contacts other departments and locations within the organization to obtain and provide information.
• Prepares reports as per customer needs and requests.
• Monitor accuracy of reporting and data base information
• Establish efficient and balanced workflows that maximize efficiency and produce high levels of service quality and customer satisfaction.
• Identify and implement systems/processes improvements that provide best business practices as it relates to customer order entry, order pricing and inventory reporting.
• Improves customer service quality by studying, evaluating, and re-designing processes, establishing and communicating service metrics, monitoring and analyzing results, implementing change as a result.
• Any other assigned responsibilities.

Requirements

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Ideal candidates will possess a Bachelor's degree (B. A.) from a four-year college or university or equivalent experience. Three to five years related experience in the flexible packaging industry which include: Inside Sales/Sales Service/Customer Service experience, Marketing experience, Pricing background, and Sound technical knowledge/ability.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to work with mathematical concepts such as probability and statistical inference, and fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

OTHER SKILLS & ABILITIES

Candidate must possess/exhibit the following skills/abilities:

• Not necessary
• Accuracy: uncompromised
• Radius, Print Flow, Work Front
• Coaching ability
• Communication Skills: technical information, internal/external customers, all levels of employees
• Conflict Resolution
• Confidentiality
• Deadlines
• Detail: attention to
• Independence
• Innovation: constantly re-develop systems
• Motivate: others
• Multiple projects/priorities/deadlines
• Negotiation ability
• Organizational skills
• Presentation skills
• Professionalism/professional demeanor
• Project Management
• Safety
• Software: Microsoft Office Suite
• Team: work as a member with all employees

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to sit, and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to reach with hands and arms, stand, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear.

The employee must occasionally lift and/or move up to 50 pounds. Any lifting over 50 pounds would require assistance. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Apply

Description

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: DeForest, WI

SHIFT: 3rd

SUMMARY: To prepare and stage press or laminator jobs. Lead shift Prepress personnel on shift tasks and day-to-day operations. Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information. Lead Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Actively participate and embrace in the SPOT Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
• Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
• Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
• Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
• Detect, report, and resolve all missing or substandard machine parts.
• Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
• Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
• Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units.
• Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run.
• Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
• Complete required reports and paperwork. Use a computer terminal.
• Perform required cleaning tasks - some daily, weekly or monthly requirements.
• Obtain Power Industrial Truck license(s).
• Load/unload trucks at shipping dock.
• Complete necessary paperwork needed for to track all cylinder movement.
• Complete PSM training and be able to perform all work in the washroom.
• Effectively communicate with coworkers throughout all shifts.
• Attend and participate in all company mandated meetings.
• Business travel may be required.
• Any other duties as assigned.

Requirements

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Associate/Bachelor's degree (A. A./B.S.) or relevant work history or equivalent from two-year college/four-year college or technical school; with one-year related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Apply

Description

For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future.

Prepress Operator

Hours: 12 Hour Nights 7pm-7am, 2-2-3 schedule

SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All of these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Actively participate and embrace in the STOP Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
• Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
• Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
• Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
• Detect, report, and resolve all missing or substandard machine parts.
• Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
• Coordinate with Mounting Dept with respect to the production schedule and the staging of jobs. *Applies to Story City, IA COE
• Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
• Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. *Applies to Roto COE.
• Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. *Applies to Roto COE.
• Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
• Operate daily a core cutter to produce accurate size cores for each scheduled print job.
• Complete required reports and paperwork. Use a computer terminal.
• Perform required cleaning tasks - some daily, weekly or monthly requirements.
• Obtain Power Industrial Truck license(s).
• Effectively communicate with coworkers throughout all shifts.
• Attend and participate in all company mandated meetings.
• Business travel may be required.
• Any other duties as assigned.

Requirements

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

Salary Description
24.71