Engineering Structures Jobs in Franklin Park Illinois

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Position Description:

The Quality Manager will lead and oversee the Quality function at the Morton Grove site, ensuring compliance with GMP regulations, global quality standards, and customer expectations. This role will manage a team of Quality professionals and work closely with cross-functional departments to support the delivery of high-quality clinical and commercial batches.

The ideal candidate brings strong leadership skills, a solid understanding of CDMO business dynamics, and hands-on experience with clinical GMP manufacturing environments.

Role & Responsibilities:

• Lead and manage the Quality Assurance and Quality Control teams at the site, as well as working with Global Regulatory Affairs for RA topics.
• Ensure compliance with GMP regulations, global quality standards, and customer requirements for API manufacturing.
• Oversee batch release activities, including review and approval of clinical and commercial GMP batches.
• Develop, implement, and maintain Quality Systems (deviations, CAPA, change control, investigations, audits, etc.) to ensure a state of continuous compliance and inspection readiness.
• Act as the primary quality contact for clients, regulatory authorities, and internal stakeholders for the site.
• Support regulatory inspections and client audits; ensure timely and effective closure of observations.
• Collaborate closely with Operations, Engineering, Regulatory Affairs, and Project Management to support manufacturing and technology transfer activities.
• Drive continuous improvement initiatives to enhance quality performance and operational efficiency.
• Manage and develop the Quality team through effective leadership, training, and performance management.
• Contribute to the site’s strategic planning as part of the site leadership team.

Experience & Requirements:

• Bachelor’s or master’s degree in chemistry, Pharmacy, Chemical Engineering, or related field.
• Proven experience in a CDMO environment, working with multiple customers and projects.
• Strong experience with clinical GMP batch manufacturing and release.
• Previous experience managing and developing teams.
• In-depth knowledge of ICH guidelines, GMP regulations (e.g., EU GMP, US FDA), and regulatory expectations.
• Excellent communication skills and ability to interact effectively with internal and external stakeholders.
• Strong problem-solving and decision-making skills
• Minimum 5 years of experience in Quality roles within the pharmaceutical or chemical API industry.

The Senior Procurement Analyst will support and execute data-driven sourcing strategies for consumable and expendable (C&E) materials, rotable and repair components for different business groups within the company. This role sits at the intersection of sourcing, analytics, and supply planning leveraging supplier data, forecasting outputs, and inventory planning concepts to inform sourcing decisions.

The ideal candidate has prior hands-on sourcing and contracts experience and is comfortable working with spend management software such as Coupa, SAP Ariba and Zycus, forecasting tools, and BI tools such as Domo, Power BI and Tableau, to support supplier strategy and sourcing decisions in a fast-paced environment.

What you will be responsible for:

• Own direct strategic sourcing for MRO materials and repair services, translating forecast demand and supply plans into multi-year sourcing strategies rather than transactional buying.
• Lead and support RFQs/RFPs, supplier negotiations, and award recommendations, ensuring alignment with cost targets, capacity constraints, quality requirements and contractual terms.
• Evaluate sourcing options using a Total Cost of Ownership (TCO) lens cost, lead time, MOQ, validity to support informed supplier selection decisions.
• Interpret outputs from internal forecasting tools and historical demand data to inform direct sourcing strategies, supplier capacity discussions and volume-based or long-term agreements.
• Demonstrate working knowledge of time-series concepts such as trend, seasonality, variability and forecast error.
• Apply a practical understanding of supply chain planning concepts safety stock, reorder point (ROP), lead time variability, and service levels - to evaluate sourcing options and understand their implications for cost, availability, and supplier strategy.
• Use SQL to extract and analyze spend, demand, pricing, lead time, and supplier performance data from ERP and planning systems.
• Use Python for data analysis, automation, and modeling related to pricing trends, demand variability, and sourcing scenarios.
• Develop and maintain BI dashboards (Power BI, Tableau, or similar) to track KPIs including cost savings, supplier OTD, contract coverage, pricing compliance and contract performance.
• Translate analytical insights into clear, actionable recommendations for sourcing and operations leadership.
• Monitor supplier performance against cost, quality, delivery, turnaround, and capacity commitments.
• Identify risks related to forecast volatility, long lead times, single-source suppliers, and constrained repair capacity.
• Support supplier performance reviews and continuous improvement initiatives.
• Work closely with Maintenance, Planning, Engineering, Quality, and Finance teams to align sourcing with operational and customer requirements.
• Assist with contract reviews, pricing agreements, and service-level terms informed by forecasted volumes.
• Ensure sourcing activities comply with FAA, EASA, AS9110, and internal quality standards.
• Maintain sourcing documentation to support audits and customer requirements.
• Adhere to ethical sourcing and procurement policies.

What you need to be successful in this role:

• Bachelor's degree in supply chain management, Business, Engineering, Data Analytics or related fields.
• 3-5 years of experience in strategic sourcing, procurement or supply chain roles.
• Prior hands-on sourcing experience is required (RFPs, supplier negotiations, supplier selection).
• Working knowledge of forecasting concepts and supply chain planning fundamentals (e.g. safety stock, ROP, EOQ, lead time variability and service levels).
• Experience using spend management software (Coupa, SAP Ariba, Zycus).
• Experience using or supporting demand planning/forecasting and inventory planning tools
• Experience using BI tools (Domo, Power BI, Tableau)
• Strong proficiency in SQL for data extraction and analysis.
• Working proficiency in Python for data analysis and automation.

Preferred:

• Master's degree preferred. Experience in aviation MRO, aerospace aftermarket, or similarly regulated environments.
• Familiarity with MRO ERP and Planning Systems (AMOS, Ramco, Trax, SAP, Oracle).
• Familiarity with FAA, EASA and AS9110 quality requirements.
• Professional certification (CPSM, CSCP, CIPS) a plus.

The rewards of your career at AAR go far beyond just your salary:

• Competitive salary and bonus package
• Comprehensive benefits package including medical, dental, and vision coverage.
• 401(k) retirement plan with company match
• Generous paid time off program
• Professional development and career advancement opportunities

Physical Demands/Work Environment:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is an office setting. Candidates should be able to adapt to a traditional business environment. AAR provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources.

Compensation:

The anticipated salary range for this position is $85,000 to $99,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. [In addition to base pay, this role is eligible for a bonus.] AAR offers a competitive benefits package, including medical/dental/vision/life/and AD&D insurance, 401(k) savings plan with employer match, paid time off and holiday pay, as well as opportunities for professional development and growth.

#LI-MA1 #LI-ONSITE

Tool & Die Technician

Location: Franklin Park, Illinois

Overview

A manufacturing company in the Franklin Park area is seeking a Tool & Die Technician to support tooling and die maintenance within a production environment. This role is responsible for building, repairing, and maintaining tooling used in metal forming and fabrication processes.

The ideal candidate has experience working with stamping dies, tooling components, and precision machining equipment, and is comfortable troubleshooting tooling issues that impact production efficiency.

Key Responsibilities

• Build, repair, and maintain tooling, dies, and fixtures used in metal fabrication or stamping operations.

• Interpret engineering drawings, blueprints, and technical instructions to support toolroom activities.

• Diagnose tooling issues and perform repairs to maintain proper die function and reduce production downtime.

• Set up and operate toolroom equipment such as mills, lathes, grinders, drills, and related machining equipment.

• Inspect dies and tooling components for wear or damage and perform necessary maintenance or adjustments.

• Use precision measuring tools including micrometers, calipers, and gauges to verify tolerances and specifications.

• Disassemble, clean, and reassemble tooling components using appropriate hand tools and maintenance procedures.

• Support troubleshooting efforts related to tooling issues affecting production equipment.

• Perform routine maintenance on toolroom machinery and equipment.

• Maintain documentation related to tooling maintenance, repairs, and inspection activities.

• Assist with training or supporting junior technicians or apprentices when needed.

• Maintain a clean, organized, and safe work environment while following company safety policies.

Qualifications

• High school diploma or equivalent required; technical training or apprenticeship in tool and die or machining preferred.

• Approximately 1–3 years of experience working in tool and die, machining, or toolroom environments.

• Ability to read and interpret blueprints and engineering drawings.

• Mechanical aptitude and familiarity with machining and tooling equipment.

• Experience operating forklifts, hoists, or cranes in an industrial setting is helpful.

• Strong communication skills and the ability to work collaboratively within a manufacturing team.

Physical Requirements

• Ability to work scheduled shifts in a manufacturing environment.

• Frequent standing and movement throughout the workday.

• Ability to lift or move materials and tooling components up to approximately 70 pounds.

• Work performed in an industrial environment with exposure to machinery, noise, and shop conditions typical of metal fabrication operations.

• 
  
• Level I: $15.83 - $24.65
  
• Level II: $16.49 - $28.60
  
• 1st Shift Hours: 6:00am-2:30pm
  
• All members included in annual cash bonus opportunity
  
  • 
    
  • 401(k) match (4.5%)
    
  • Annual Woodward stock contribution (5%)
    
  
  
  
• Tuition reimbursement and Training/Professional Development opportunities for all members
  
• 12 paid holidays, including floating holidays
  
• Industry leading medical, dental, and vision Insurance upon date of hire
  
• Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave
  
• Adoption Assistance
  
• Employee Assistance Program, including mental health benefits
  
• Member Life & AD&D / Long Term Disability / Member Optional Life
  
• Member referral bonus
  
• Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending
  
• Voluntary benefits, including:
  
  • 
    
  • Home / Auto Insurance discounts
    
  • Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave
    
  
  
  

• 
  
• Assemble and/or perform preset calibration/final testing. Performs low to moderately complex assembly and test. Products may include but are not limited to small products, light subassemblies, and/or complete units of a smaller size.
  
• Assemble, install, align, adjust and fit subassemblies and parts or auxiliary equipment using appropriate tools and equipment as per work instructions.
  
• Clean parts and maintain tooling and equipment per proper work instructions.
  
• Follow work instructions associated with assembly skills to become certified for work being performed.
  
• Work with close tolerances and fits to meet engineering and operating requirements.
  
• Complete all required paperwork in an accurate and efficient manner, including Quality Assurance and Test Record.
  

• 
  
• High school diploma or equivalent required
  
• Mechanical aptitude required
  
• Ability to use a variety of basic hand tools
  
• Basic written/verbal communication skills
  
• Basic computer skills
  
• Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
  
• Detail orientation and ability to follow work instructions
  

• 
  
• High school diploma or equivalent required
  
• 2-5 years of related experience required
  
• Mechanical aptitude required
  
• Ability to use a variety of basic hand tools
  
• Basic written/verbal communication skills
  
• Basic computer skills
  
• Willingness to demonstrate eagerness, enthusiasm, and optimism for work activities
  
• Detail orientation and ability to follow work instructions
  

Schaumburg, Illinois, USA Job Description

Location: Schaumburg, IL (Hybrid work schedule)

Are you looking for a unique vehicle to a successful career? NTN Bearing Corporation (NBCA) has employment opportunities that will assist qualified candidates to achieve their desired goals. NTN is one of the world's premier bearing manufacturers serving the automotive and industrial markets for the past 100 years. Proven stability, growing sales and career opportunities are a few of the factors that set NTN apart. NTN is currently seeking an Account Support Representative in our Mt. Prospect office.

The Account Support Representative is the customer's main point of contact. The ASR is responsible for placing orders, checking the status of orders, and for product price/availability information. The ASR represents the customer's interest when interacting with various departments within NTN. This position has significant interactions with Logistics, Credit, Engineering, Marketing, Sales, Inventory Planning and the Warehouses. The ASR ensures that each customer has a positive experience with NTN.

Major Responsibilities

• Provide quality service to customers.
• Sales Support, understand order processing and expedite orders.
• Responding to inventory inquiries. Solution driven and team oriented.
• Credit/Debit Requests.
• Understand NTN Procedures, Principles and Practices.
• Forecast Analysis
• Review Electronic Data Interchange Output
• Analyze Quality and Delivery Reports received from Customers
• Analyze Open Order Reports for customers.
• Pull and enter data into Customer Portals.
• Knowledge of EDI process

Requirements, Knowledge, Skills And Abilities

• Bachelor's Degree preferably in business or related field; or three to five years of related experience.
• Account management-related experience preferred.
• Demonstrated proficiency with customer focus with the ability to engage and diffuse dissatisfied customers.
• Proficiency in Microsoft Office, JDE/ Oracle experience preferred.
• Strong written and verbal communication skills.
• Effective organizational/time management skills with the ability to multi-task.

The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, business needs, geographical location, and internal equity. At NTN, it is not typical for an individual to be hired at or near the top end of the range for their role, and compensation decisions are dependent upon the facts and circumstances of each position and candidate. Pay range $45K - $53K annually.

NTN Bearing Corporation (NBCA) offers a full range of comprehensive benefits, including choice of medical plans, dental, vision, life and disability insurance, a cash matching 401(k) Plan, separate company contribution to your 401(k)-retirement account, paid vacation, and eligibility for tuition reimbursement. NTN Bearing Corporation is an equal opportunity employer.

All qualified applicants are encouraged to apply. Qualified candidates will be considered for employment without regard to race, color, religion, sex, or national origin. We further are committed to considering all qualified individuals with disabilities and will provide reasonable accommodation as needed throughout the hiring process. Qualified Veterans are encouraged to apply.

How To Apply

If you are interested in this employment opportunity, please visit our website at , click careers and apply.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Manufacturing Data & Sales Analyst to join their team. Seeking a data-driven analytics professional who thrives at the intersection of manufacturing operations, business intelligence, and executive decision support. This is a high-impact role for someone who enjoys building insight from the ground up—designing dashboards, automating reporting, owning data integrity, and translating complex information into clear, actionable business outcomes.

Why This Role Stands Out:

• High visibility and direct partnership with senior leadership.
• Opportunity to own and evolve enterprise-level analytics and reporting.
• Manufacturing environment where data truly drives strategy.
• Long-term growth potential in a stable, well-capitalized organization.

Key Responsibilities:

Data, Analytics & Reporting:

• Design, build, and continuously enhance dashboards, scorecards, and KPI reporting to support operational and commercial performance.
• Translate raw data into meaningful insights that influence decision-making at the executive level.
• Automate recurring reports and analytics processes to improve efficiency, accuracy, and scalability.
• Analyze trends related to revenue, production performance, forecasting, and product initiatives.

Manufacturing & Cross-Functional Partnership:

• Collaborate closely with Operations, Finance, IT, and Commercial teams to align data, metrics, and performance goals.
• Support forecasting, planning cycles, and performance reviews with reliable, actionable analytics.
• Identify risks, opportunities, and performance gaps within data sets and recommend solutions.

Systems & Data Ownership:

• Act as the primary owner of manufacturing and sales-related data systems, ensuring usability, accuracy, and value.
• Lead continuous improvement of reporting tools and system integrations.
• Partner with internal and external stakeholders to enhance system reporting capabilities.
• Champion data governance, consistency, and best practices across the organization.

Qualifications and Skills:

• Bachelor’s Degree in Data Science, Analytics, Business Intelligence, or a related field
• Proven experience building and maintaining dashboards, scorecards, and analytics tools.
• Background supporting a manufacturing environment.
• Strong ability to own data end-to-end—from extraction to interpretation to executive presentation.
• Experience automating reporting and analytics processes.
• Advanced analytical, problem-solving, and critical-thinking skills.
• Ability to clearly communicate insights to both technical and non-technical audiences.
• Advanced proficiency with Excel, reporting platforms, and Microsoft Office Suite.
• Advanced proficiency in SQL, PowerBI, and/or Tableau.
• Experience with IQMS is preferred.
• Strategic mindset with exceptional attention to detail.

Compensation Range: $90,000 - $120,000 + 15% Bonus

Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance.

If you are a passionate Manufacturing Data & Sales Analystlooking for anew and rewarding career, please apply today! You don’t want to miss out on this opportunity!

LHH is a leader in permanent recruitment—and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn’t a perfect match.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit