Engineering Structures Jobs in Everett Wa Flexible
418 positions found — Page 9
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes.
Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications.
You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work.
Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications: Experience using hand tools and/or hand-held power tools Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications: Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams Attended a Boeing partnered manufacturing related high school or Preferred community and technology college academic program Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30 Applications for this position will be accepted until Sept.
04, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool
- Milling Machine Operator to join our Fabrication team in Everett and Renton , Washington .
As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards.
You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance.
Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirements Obtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operations Make necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorized Use measuring instruments and gauges to check cutting tools and parts for conformance to specifications and prints Assist planners or programmers in determining the final numerical control program as authorized Mount and check cutting tools in holders, ensuring proper loading in machine magazines or spindles Initiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practices Load, preload, and manually position fixtures at designated program stops Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting Work in environments that may involve contact with metals, solvents, and coolants Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications 1 Years of experience using precision measuring tools 1 Years of experience as a machine operator, writing and editing CNC programs 1 Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications 1 Years of experience reading and interpreting blueprint and assembly instructions or drawings 1 Years of experience operating 3, 4, or 5 axis NC/CNC machine tools Ability to lift, push, and pull up to 35 pounds Preferred Qualifications: Experience working with and around hazardous materials (while using the proper protective equipment) Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Radius Recycling is currently hiring an Environmental Manager in Washington! The EM is responsible for implementation of company policies and procedural plans related to all environmental media, including air, stormwater, groundwater, solid, and/or hazardous waste. The EM maintains regional facilities in compliance with all applicable federal, state, and local environmental laws, standards, and permits; and has responsibility for maintaining facility compliance with applicable environmental permit conditions.
This position has direct responsibility for conducting on-site fieldwork associated with sampling, monitoring, observing, and recording environmental data; and preparing reports, records, and plans required by regulatory permit, plan, or agreement. The EM assists in the overall planning, design, installation, and operation of pollution control equipment and associated metering and/or measuring devices. The EM delivers training programs and provides other advice to management on practical and necessary steps to prevent or abate pollution arising from operations and maintain compliance with regulatory requirements contained within a variety of environmental permits, plans and policies. The EM provides first line immediate environmental emergency responses to incidents, spills, releases, and accidents. The EM provides appropriate notifications to management and appropriate regulatory agencies and assists with site investigations and Remediation projects related to due diligence activities and other identified environmental issues.
This position operates within flexible parameters. The primary goal of this position is to achieve excellence in all facets of environmental management, while providing the highest quality product safely, effectively, efficiently and in compliance with all applicable regulatory Requirements. The EM seeks to decrease the frequency of incidents and errors, compliance deviations and increase profits.
Essential Functions
- Ensures all Company Environmental standards are strictly adhered to.
- Monitors capital projects and provides recommendations for improving environmental controls.
- Encourages reporting of environmental control violations.
- Assists in conducting appropriate training for site personnel as required by local, state, and federal regulations.
- Assists in development and implementation of environmental procedures for all sites.
- Monitors pending legislative and regulatory actions to evaluate the potential impact on operations and develops appropriate response plans to prepare for and ensure compliance.
- Helps provide a safe environment for all employees, customers, and visitors.
- Environmental Management Systems (EMS)
- Ensures all EMS clauses and Requirements are maintained for all ISO 14001:2015 certified sites or those sites that are undergoing EMS implementation and certification.
- Participates in EMS implementation activities at assigned sites and attends all Stage II audits and report outs.
- Participates in the EMS internal auditor program and completes auditor training with 6 months of obtaining the EM role.
- Operational Performance & Best Management Practices
- Spends approximately 50% of time in the field to assist operations staff and other EMs in driving continuous improvement related to environmental compliance programs.
- Prepares and maintains environmental records and reports.
- Ensures investigations and incident analyses are completed to implement necessary corrective actions.
- Assists as requested, in the planning, review and oversight of Remedial actions involving multiple media under various federal, state, and local jurisdictions. Includes developing appropriate work scopes, requesting, and reviewing proposals, selecting consultants & contractors, establishing budgets for management approval, scheduling work in coordination with operations, managing activities to maintain budget and schedule, reporting status and end results to management and regulatory agencies, as necessary.
- Assists in efforts to achieve specific waste reduction/minimization at regional locations.
- Collects, evaluates, and disseminates pertinent information relating to environmental compliance Requirements and maintains appropriate reference files.
- Advises regional management and operating managers concerning the organization's environmental objectives and assists in determining and implementing corrective actions to ensure consistency in company regulatory compliance efforts.
- Recommends changes in procedures, design, or equipment when necessary.
- Represents the organization occasionally at public and/or private discussions including technical forums, regulatory hearings, legal actions, or other public meetings.
- Maintains relationships with outside associations concerned with environmental protection, regulatory officials, and local politicians.
- Assists, as requested, in efforts to develop, plan, and manage environmental investigations associated with past operations and sites being evaluated for acquisition or sale.
- Provides oversight and management of work performed by various consultants and contractors, as well as coordination with both in-house and outside legal counsel.
- Plans, conducts, and/or supervises consultants completing environmental research or other project assignments.
- Performs other related duties as assigned by their assigned Senior EM or environmental operations management.
- Equipment & Maintenance
- Ensures construction plans are reviewed to determine that pollution control considerations are adequate and provides technical supervision for construction and installation of pollution control equipment.
Supervisory Responsibility
Occasional or routine supervisory responsibility for environmental employees designated as the Environmental Technicians, Environmental Systems Control Operators (ESCO), and/or Environmental Analyst. Position includes routine management of engineering contractors, environmental consultants, and other contractors. Supervision of pollution abatement equipment operators may be required as well.
Job Conditions
Office and active field working environment including collection of samples for testing, general information gathering, and project management at various locations. It is necessary to be able to walk/climb in active industrial yards with uneven surfaces and to out-of-the-way areas. Must be comfortable with heights. Occasional exposure to inclement weather conditions and travel is required. Increased time spent involved in environmental issues at sites owned/operated by joint ventures and/or sister companies. Regional and domestic travel required. Position may have to respond to urgent situations on off hours and/or weekends and holidays.
Physical Activities Required To Perform Essential Functions
Ability to lift and carry up to 20 pounds frequently, and up to 50 pounds occasionally; be mobile within an office and field environment; operate an automobile; be mobile to travel frequently by auto and airplane to local and regional locations; climb; negotiate uneven surfaces; sit, stand, and/or walk for extended periods of time; keyboard for up to several hours per day; and communicate in a professional manner in person and by phone. Visual acuity for extensive reading, examining documents, conducting field sampling related activities, operating an automobile, and operating a laptop computer.
Qualifications
Bachelor's degree with preference for engineering or science background including environmental science, chemistry, geology, or biology. Minimum of four to seven years' experience with environmental regulations, sampling, testing of air, water, soil, hazardous waste, and other materials. This position requires possession of a valid driver's license and the ability to drive an automobile.
Preference for person trained or certified in hazardous materials management, hazardous waste handling, site clean-up operations, and/or emergency response. Knowledge of local, state, and federal environmental programs and regulations with approved sampling techniques and procedures. Strong analytical, interpersonal, written, and oral communication skills required. Proficiency with Microsoft Office Suite, environmental management systems, and environmental testing or analytical equipment. Ability to apply principles of logical or scientific thinking to define problems; collect data; establish facts; draw valid conclusions in controlled situations; and read and understand engineering plans and specifications.
PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required.
All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older.
Radius Recycling participates in e-verify for all U.S. new hires.
An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check.
All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees.
As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.
Come make an impact in the Public Sector! Join our team to do meaningful work and support high-impact government missions.
GP Strategies Government Solutions, Inc. Government Training Solutions | GP Strategies, a wholly owned subsidiary of GP Strategies Corporation, focuses on helping every public sector team unlock its full potential through people performance solutions.
Our work directly supports mission critical government agencies, including:
• Air Force
• Army
• Department of Defense (DoD)
• Department of Health & Human Services (HHS)
• Department of Homeland Security
• NASA
• National Highway Institute (NHI) | Federal Highway Administration (FHWA)
• State & Local Governments
Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.
GP Strategies Corporation, the corporate parent of GP Strategies Government Solutions, is a global leader in talent transformation, dedicated to empowering organizations to unlock their full potential. We help businesses enhance workforce performance and achieve strategic goals through innovative, technology-enabled learning solutions. For over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes.
GP Strategies Government Solutions has an immediate need for a Part-Time Aviation Instructor to support a large aerospace manufacturing client in Everett, WA. The Instructor will teach classes onsite. Instructors are teaching mostly 1st and 2nd shift. The content is already created so the Instructor is not responsible for creating the content.
Typical Courses include the following:
- Airplane Manufacturing Engineering
- Common Manufacturing Execution System (CMES) Basics
- Introduction to CMES for A&I Mechanic
- Introduction to CMES for ADPP Mechanics
- CMES IP Basics for BCA Industrial Engineering
- CMES IP Basics for BCA Quality
- CMES ADPP Basics for BCA Quality
Job Summary:
- Utilize teaching aids such as training handbooks, demonstration models, multimedia visual aids, computer tutorials and reference works.
- Apply learning techniques to ensure student retention and prove competency in specific tasks and behaviors.
- Manage the course training environment to enable the course content to be delivered as designed.
- Delivers training sessions covering specified areas of technical specialty.
- Deploys learning assessments to measure progress and to evaluate effectiveness of recommended training.
- Travels to client sites as needed.
- Participate in and prepare to deliver other courses within expertise domain knowledge areas
Qualifications:
- Experience in the aviation/aerospace Industry
- Experience as an Instructor in a classroom environment
- Manage basic technology to deliver
- Understanding of CMES (Common Manufacturing Execution System) a plus
We are seeking candidates with the following abilities:
- Ability to understand Adult learning principles – recognize the dynamics and behavioral styles of the participants to effectively guide the discussion
- Ability to challenge learners’ assumptions to expose gap between knowledge, action and beliefs
- Facilitate dialog that helps learner make sense of content and build confidence
- Flexible and resourceful to solve immediate problems and get help when needed
PHYSICAL REQUIREMENTS
General physical requirements needed to perform the essential functions of this job may vary based on location of assignment.
Assignment Location – Everett, WA
- Sedentary Work – Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body.
- Fingering (typing), communicating, repetitive motions.
- Close visual acuity to prepare and analyze data, view computer monitors and read. May need to view presentation screens and other visual aids in a virtual setting.
- Inside environmental conditions with protection from outside elements.
At GP Strategies Government Solutions culture focuses on performance and revolves around respect, fairness, and working collaboratively to achieve our goals. We support our People, no matter who they are or where they are from, because we all have valuable and unique perspectives and approaches. That's how great ideas are born, which enable us to work smarter.
GP Strategies Government Solutions is committed and proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth and related conditions, sexual orientation, and gender identity), national origin, age, veteran status, disability, or any other federally protected class.
GP Government Solutions is a subsidiary of GP Strategies Corporation, a global workforce-transformation company with over 50 plus years of experience. To find out more, please visit us as
Our client, a fast growing publicly traded manufacturing company is looking for a Senior Accountant to join. This role will have meaningful responsibility across financial reporting, operational accounting, and process optimization within a multi-entity, global environment.
The ideal candidate is detail-oriented, technically strong in U.S. GAAP, and comfortable operating in a matrixed organization with cross-border collaboration.
Core Responsibilities
Financial Close & Reporting
- Manage critical components of the monthly and quarterly close cycle
- Prepare journal entries, account reconciliations, and analytical reviews
- Perform detailed variance and trend analysis to support reporting accuracy
- Ensure results align with U.S. GAAP and corporate reporting policies
Compliance & Audit Coordination
- Support both internal and external audit activities
- Prepare audit documentation, schedules, and regulatory support files
- Maintain compliance with global accounting standards, including U.S. GAAP and applicable local requirements
Cross-Functional Partnership
- Partner with Operations, Engineering, Product, Tax, Legal, and other internal stakeholders to ensure proper accounting treatment of business activities
- Assist in evaluating complex transactions and operational impacts on financial reporting
Process Optimization & Controls
- Identify opportunities to enhance efficiency across end-to-end accounting workflows
- Contribute to initiatives aimed at improving internal controls and accelerating close timelines
- Collaborate with shared services teams, including offshore support functions, to refine processes and strengthen accountability
Special Projects & Systems
- Provide support for ERP enhancements, system upgrades, and finance transformation initiatives
- Assist in financial modeling, business case analysis, and other ad hoc strategic projects
- Contribute to continuous improvement efforts leveraging technology and automation tools
Qualifications & Experience
- Bachelor's degree in Accounting required; CPA or equivalent certification strongly preferred
- 4+ years of progressive accounting experience
- Background in manufacturing and/or publicly traded environments preferred
- Strong knowledge of U.S. GAAP and corporate reporting standards
- Experience supporting audits and working within structured control environments
- Familiarity with procure-to-pay processes
- Proficiency in Excel; experience with Oracle or comparable ERP systems preferred
- Experience working with shared services or offshore accounting teams preferred
- Ability to manage multiple deadlines in a dynamic, global environment
- Strong analytical mindset with attention to detail and ownership mentality
- Willingness to travel up to 10% (domestic and international)
Remote working/work at home options are available for this role.
IDR is hiring for a 6 Month Contract to Hire Technical Product Owner
Join a leading organization in the data technology sector, where innovation and agility drive success. This fully remote role offers the opportunity to influence key data engineering initiatives, collaborating across diverse teams to deliver impactful digital products. If you're passionate about data solutions, thrive in fast-paced environments, and possess a strong technical acumen, this is your chance to make a difference and grow your career.
Position Overview for the Technical Product Owner:
• Act as a pivotal link between Data Engineering teams and business stakeholders to facilitate successful technology delivery across digital products
• Manage and prioritize data engineering product backlog, ensuring alignment with organizational objectives
• Author user stories and acceptance criteria, leading refinement sessions and sprint planning
• Lead Agile ceremonies including daily standups, sprint reviews, and retrospectives to ensure smooth delivery
• Utilize data and AI tools to analyze issues, optimize workflows, and maintain high quality in product artifacts
Requirements for the Technical Product Owner:
• Proven experience in stakeholder interaction and managing product backlogs in an Agile environment
• Strong documentation skills and the ability to communicate complex technical requirements effectively
• Proficiency with SQL, data engineering processes, and related technologies such as Azure SQL, Data Factory, SSIS, and Azure Data Lake
• Familiarity with Microsoft tech stack and data delivery tools is highly preferred
• Solid understanding of data engineering concepts and successful delivery of technical products
What's in it for you?
• Opportunity to work remotely with flexible hours, supporting a dynamic team that values innovation and autonomy
• Competitive pay rate of $60-68/hr, leading to an annualized salary of approximately $135,000 + 10% STIP
• Be part of a company with a strong focus on data-driven solutions and cutting-edge technology adoption
• Gain hands-on experience with AI-driven processes and advanced data engineering tools
Why IDR?
• 25+ Years of Proven Industry Experience in 4 major markets
• Employee Stock Ownership Program
• Dedicated Engagement Manager who is committed to you and your success
• Medical, Dental, Vision, and Life Insurance
• ClearlyRated's Best of Staffing Client and Talent Award winner 12 years in a row.
REMOTE
Remote working/work at home options are available for this role.
The Opportunity:
We are a lean and high velocity multifamily investment firm with 440 units and a mandate to scale to 1,500+ units by 2027 on our path to $1 Billion AUM in the next 5 years. We operate with a startup culture backed by a strong principal balance sheet, and we will maintain this "Day 1" intensity until our $1 Billion goal is reached. We are looking for a Founding Director of Finance and Investments who is prepared to make the business their number one priority and own the entire financial lifecycle of our portfolio.
This is a true "multi-hat" leadership role, You will be responsible for building and owning the engine across three phases: Acquisitions, where you will be responsible for sourcing and underwriting new opportunities Finance, where you institutionalize the back-end through precise cash flow forecasting, investor distributions, and tax strategy; and Asset Management, where you hold the portfolio accountable to your forecasts by implementing aggressive execution plans to ensure every property hits its NOI targets. We are looking for a partner who wants to trade corporate safety for long-term equity and help us build this platform from the ground up.
Note: Local to Texas is highly preferred. If not in Texas, candidates must be willing to Spend 5 business days per month in Houston Texas overseeing property (Asset mgmt), networking with brokers and touring new acquisitions. During periods of due diligence requirements to be Houston may increase. Please confirm in your application this travel (all paid for by company).
Key Accountabilities:
- Investment Modeling & Underwriting: You will be the primary lead on modeling new opportunities. You will take raw data from brokers or off-market sources, build complex pro-formas from scratch, and present the investment case to the committee.
- Preliminary Investment Committee (PIC) Leadership: You serve as the "Gatekeeper." Before any deal reaches the Founders, you are responsible for the internal audit of the case—stress-testing exit caps, opex loads, and reno timelines. You are the final line of defense for the firm's capital.
- Due Diligence & Transaction Execution: Lead the financial "scrub" on all acquisitions. You will own the closing checklist, coordinating with lenders, attorneys, and title companies to ensure every debt facility is funded with 100% precision.
- Asset Management & Performance Audit: You aren't just reporting numbers; you are driving them. You will perform monthly audits of property management, identify "cash leakage," and ensure the portfolio hits its NOI targets and investor distributions.
- GL Integrity & Tax Strategy: You own the "Book of Record." You will oversee all accounting entries, manage a rolling 13-week cash forecast, and ensure the firm is "tax-ready" for outside CPAs.
- Treasury & Capital Management: You own the firm’s liquidity. You will manage the movement of capital between property accounts, GP accounts, and the Hold-Co, ensuring we are optimized for both daily operations and upcoming acquisition deposits.
- Tax Strategy & Compliance Oversight: You aren't just filing forms; you are the architect. You will manage the tax filing checklist for all 40+ (and growing) entities, ensuring every K-1 is issued on time and that we are maximizing depreciation and cost-segregation strategies across the portfolio.
- Institutional Reporting & Audit: You will design and produce the quarterly "Investor Report" and "Lender Compliance" packages. You must be able to defend our financials to an institutional auditor or a Life-Co lender with absolute authority.
- Entity & Corporate Housekeeping: You will interface directly with Investor Counsel to resolve legal issues and ensure all corporate entities remain in "Good Standing" across multiple states. You are the "Compliance Officer" for the firm.
- Strategic Financial Planning: You will prepare the annual corporate budget for the Hold-Co and tell the Founders exactly when we have the cash position to buy, when we should refinance, and when we should sell.
- Waterfall & Distribution Management: Build and maintain manual "Shadow Waterfall" models to audit all GP/LP distributions, ensuring all investor classes are paid with 100% accuracy.
- System Architecture: You will help design the infrastructure (CRM workflows, checks and balances) to allow the firm to scale without breaking.
Execution Over Delegation :
We are a lean firm where the Director is expected to "turn the wrenches," not just design the machine. If you are looking to sit in a strategy room and wait for reports to hit your desk, this is not the job for you. You must be an Ambivert—equally comfortable in deep-work silence building a complex model as you are in high-stakes confrontations with vendors or lenders. We are looking for the architect who is excited to turn every wrench today, so they can effectively lead the entire department tomorrow."
Qualifications:
- Experience: 5–8+ years in Real Estate Finance, Investment Banking, or REPE.
- Background: Mandatory experience in Multifamily Syndication. You must have "Battle Scars" from managing the financial lifecycle of actual deals.
- Technical Arsenal: Elite-level Excel skills. You must be a "Blank-Sheet" Ninja (Waterfalls, Sensitivity Tables, etc.).
- Mindset: Skeptical, process-oriented, and highly organized. You must be a "Mismatcher" who naturally finds the holes in a financial story.
- Education: CPA designation is a significant plus, but technical execution is the priority.
- Tech-Savvy: Proficiency in AI automation and modern CRM workflows is highly preferred.
The Rewards:
- Base Salary: $135,000 – $150,000 (Built for a high-growth startup environment).
- Asset Performance Bonus: $50,000 – $75,000+ targeted annual bonus tied directly to portfolio performance and investor distributions being on Target
- Founding Member Equity: 3.0% – 5.0% Equity stake in the Holding Entity. This is true ownership in the firm’s long-term enterprise value, not just deal-level points.
- Vesting Structure: Standard 5-year annual vesting schedule to ensure long-term alignment.
To Apply: Submission Requirements:
To be considered, submit your resume and a brief note confirming the following. Applications without these specific keywords will be automatically filtered out.
- Reference Verification: Are you confident your past managers will verify your technical expertise? If so, include: "I welcome the reference process."
- Are you willing to complete a live, modeling test? If so, include: "Absolute."
- We conduct a rigorous 30-day process (6 interviews + 5 references interviews). If you are comfortable with this, include: "Understood."
- This role explicitly requires experience in Real Estate Multifamily syndication, Based on this how many years have you been in Multifamily, and what "other hats" have you worn
Remote working/work at home options are available for this role.
Job Title: Director of Analytics & Insights (Amazon Agency)
Location: Milwaukee, WI
Alternate location: Or home based anywhere in the US
Industry: Ecommerce (Amazon Agency)
Channel: Mostly Amazon and
Direct Reports: Team of 5-6 Analysts
Visa: No sponsorship possible. Must have valid work authorization
Job ID: ZR_9557_JOB
Remote work policy: Full remote
Job Seniority: Executive Level, Middle Management Level
Company size: Medium (50-1000 ppl)
Company Ownership: Privately Owned
Industry(ies): Ecommerce, Consumer Goods,
Function(s): eCommerce,
Region(s): Arizona, Atlanta, Boston, Chicago, Cincinnati, Las Vegas, Los Angeles Area, New Orleans, NORTH AMERICA, USA, Dallas, California, Fort Lauderdale / West Palm Beach, Houston, Colorado, Connecticut, San Francisco Area, Florida, Miami, Georgia, Illinois, Louisiana, Massachusetts, Michigan, Minnesota, Nevada, New Jersey, New York City area, North Carolina, Ohio, Pennsylvania, Texas, Utah, Washington DC, Maryland, Delaware, Washington
Company Description
Our client is a well-established ecommerce services organization that supports brands in building and scaling their presence across major online marketplaces (Amazon and mostly). With a long-standing track record in digital commerce, the firm provides strategic and operational support spanning retail, media, creative and performance enablement. Its environment is collaborative, entrepreneurial and data-driven, with a strong emphasis on translating complexity into clear business value.
Objective of the Role
Our client is seeking a Director of Analytics & Insights to lead the strategic development of its measurement and insights capability. This individual will define how performance is measured, interpreted and communicated across client engagements, with a particular focus on ecommerce, digital advertising effectiveness and broader brand growth.
The role is designed for a senior leader who can combine technical depth with business judgment. The successful candidate will establish a clear vision for analytics and reporting, strengthen the quality of insight generation across the organization, and help create scalable frameworks that enable client teams to translate data into action. This position will also play an important role in shaping how advanced tools, automation and artificial intelligence support a modern analytics function.
Ideal Profile
The ideal candidate will bring a strong background in ecommerce analytics, digital advertising measurement and commercial insight generation, ideally gained within a brand-led environment, an agency, or a similarly complex client-facing business. A deep understanding of marketplace ecosystems is essential, particularly in relation to Amazon advertising, Amazon Marketing Cloud, omnichannel measurement and upper-funnel media effectiveness.
This person should be equally credible in technical and executive settings: capable of engaging with analysts, data partners and technical teams while also presenting clear, actionable conclusions to senior leadership. The right profile will combine strategic thinking, intellectual curiosity, sound judgment and the ability to bring structure to an evolving function.
Responsibilities
- Define and advance the analytics and insights vision for the organization.
- Establish scalable measurement frameworks covering retail performance, advertising effectiveness, brand growth and operational health.
- Lead and develop the analytics team, strengthening capabilities, role clarity and professional growth.
- Create clear standards for reporting, dashboards and insight delivery across client accounts.
- Improve the quality of interpretation by ensuring data is translated into commercial recommendations and action plans.
- Serve as a subject matter expert on advanced ecommerce measurement, including Amazon Marketing Cloud and omnichannel analytics.
- Partner with internal technology and engineering teams to improve data infrastructure, automation and reporting efficiency.
- Evaluate the current operating model and clarify ownership between analytics, reporting and client-facing teams.
- Support the development of advanced analyses that go beyond standard dashboard reporting and provide deeper strategic value.
- Ensure analytical output remains relevant, accurate, decision-oriented and aligned with the evolving needs of clients and the business.
Requirements
- Significant experience in analytics and insights leadership, including team management.
- Strong expertise in digital advertising measurement and ecommerce performance analysis.
- Demonstrated knowledge of Amazon advertising tools, metrics and measurement methodologies, including Amazon Marketing Cloud.
- Familiarity with omnichannel measurement, customer journey analysis and upper-funnel media evaluation.
- Advanced capability in SQL and experience with business intelligence and visualization platforms such as Tableau, Looker or similar tools.
- Working knowledge of statistical or analytical tools such as Python, R or equivalent.
- Ability to design measurement frameworks that connect media investment to broader business outcomes.
- Strong communication skills, with the ability to simplify complex analysis for non-technical audiences.
- Experience operating in a fast-paced, evolving environment with multiple stakeholders.
- Bachelor's degree required; an advanced degree is advantageous.
Remote working/work at home options are available for this role.
AI Research Scientist | Machine Learning | Deep Learning | Natural Language Processing | LLM | Hybrid | San Jose, CA
Title: AI Research Scientist
Location: San Jose, CA
Responsibilities:
- Design, execute, and analyze machine learning experiments, establishing strong baselines and selecting appropriate evaluation metrics.
- Stay up to date with the latest AI research; identify, adapt, and validate novel techniques for company-specific use cases.
- Define rigorous evaluation protocols, including offline metrics, user studies, and adversarial (red team) testing to ensure statistical soundness.
- Specify data and annotation requirements; develop annotation guidelines and oversee quality control processes.
- Collaborate closely with domain experts, product managers, and engineering teams to refine problem statements and operational constraints.
- Develop reusable research assets such as datasets, modular code components, evaluation suites, and comprehensive documentation.
- Work alongside ML Engineers to optimize training and inference pipelines, ensuring seamless integration into production systems.
- Contribute to academic publications and represent the company in research communities, as needed.
Educational Qualifications:
- Ph.D. in Computer Science, Artificial Intelligence, Machine Learning, or a related field is strongly preferred.
- Candidates with a master’s degree and exceptional research or industry experience will also be considered.
Industry Experience:
- 3–5 years of experience in AI/ML research roles, ideally in applied or product-focused environments.
- Demonstrated success in delivering research-driven solutions that have been deployed in production.
- Experience collaborating in cross-functional teams across research, engineering, and product.
- Publications in top-tier AI/ML conferences (e.g., NeurIPS, ICML, ACL, CVPR) are a plus.
Technical Skills:
- Strong foundational knowledge in machine learning and deep learning algorithms.
- Hands-on experience with PEFT/LoRA, adapters, fine-tuning techniques, and RLHF/RLAIF (e.g., PPO, DPO, GRPO).
- Ability to read, implement, and adapt state-of-the-art research papers to real-world use cases.
- Proficiency in hypothesis-driven experimentation, ablation studies, and statistically sound evaluations.
- Advanced programming skills in Python (preferred), C++, or Java.
- Experience with deep learning frameworks such as PyTorch, Hugging Face, NumPy, etc.
- Strong mathematical foundations in probability, linear algebra, and calculus.
- Domain expertise in one or more areas: natural language processing (NLP), symbolic reasoning, speech processing, etc.
- Ability to translate research insights into roadmaps, technical specifications, and product improvements.
AI Research Scientist | Machine Learning | Deep Learning | Natural Language Processing | LLM | Hybrid | San Jose, CA
Remote working/work at home options are available for this role.