Engineering Structures Jobs in Ca

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

Open date: April 23, 2025

Most recent review date: Thursday, Nov 20, 2025 at 11:59pm (Pacific Time)

Applications received after this date will be reviewed by the search committee if the position has not yet been filled.

Final date: Tuesday, Mar 31, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

The Blum Center for Developing Economies at the University of California, Berkeley is generating an applicant pool of qualified instructors and invites applications to teach courses in the area of Development Engineering. In addition to core DevEng classes (DevEng 200, 202, 203, 204, 205, 206), new classes may be planned based upon student interest and candidate expertise. Candidates under consideration will be contacted by the Blum Center. The previous pool will close April 9, 2025. Those interested in remaining in the pool must reapply.

Founded in 2006, The Blum Center for Developing Economies at UC Berkeley brings together academics, partner organizations, entrepreneurs, and business leaders to solve the world's most pressing development challenges. Operating on the notion that a world-class public research university must be a force for tackling society's most persistent challenges, the Blum Center inspires and facilitates interdisciplinary research and problem-solving; teaches students to think critically and optimistically about issues of poverty and development; equips the next generation of social entrepreneurs with the skills needed to design, deploy, and scale world- changing innovations; and advises and trains groups and organizations on methods for fostering a culture of innovation in their workplaces. To learn more about our center please visit our website.

General Duties: Lecturers are responsible for the course syllabus, curriculum development and delivery, student mentoring, student assessment through relevant projects, problem sets, exams, class attendance and participation, and grades. Project-based courses will require working with potential sponsors.

The Blum Center welcomes candidates whose professional and teaching experiences align with our mission to help individuals and communities increase access to resources through economic development and technology innovation.

Unit:

Program: academics/development-engineering/

Labor Contract:

Bachelor's degree or equivalent international degree is required at time of application.

Required by the start of the appointment, applicants must hold either a master's degree or higher, or equivalent international degree, or at least 5 years of industry or nonprofit organization experience.

Ph.D. or equivalent international degree or graduate professional degree is preferred in a discipline associated with development engineering (e.g ., development technologies, development economics and business models, impact analysis, design for development, city planning, political economy). Teaching experience in two or more of the topic areas listed below is preferred. Also desirable are a strong track record in developing and implementing new and innovative methods of delivering education and hands-on learning, project-based learning, and experience working with students from a range of disciplines. Leadership experience in professional practice is preferred. Applicants must be eligible to work in the U.S.A.

Topic areas include, but are not limited to:

* Critical theories in global development, engineering, and design

* Human-centered design

* Design for base of the pyramid

* Poverty studies

* Community-based teaching, research, project-implementation

* Innovation studies / theory of change

* Sustainable development

* Social and environmental justice

* Engineering ethics

* Social entrepreneurship

* Innovation in humanitarian and disaster response

* Climate action

* Digital transformation of development

* AI for social impact

* Health technologies for low-resource settings

* Sustainability

* Software for Sustainable Design

* Multidisciplinary project-based courses that engage students in experiential learning to help to solve real-world problems (e.g. STEM Solutions for Social Impact; Hacking for Local; Design, Evaluate and Scale Development Technologies; Mission Driven Start-Ups)

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Cover Letter

  
  

• Statement of Teaching - Please describe your prior teaching experience, teaching philosophy, and future instructional interests. You may include specific examples of how you have supported - or plan to support - student success through curriculum design, classroom environment, and teaching methods.

  
  

• Past Teaching Evaluation (Optional)

  
  

• 2 required (contact information only)

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

Electrical Engineering Manager

Ground Systems - Autonomous flight

Salary: Flexible +equity

Location: San Francisco (generous relocation package available)

The Role - Electrical Engineering Manager

This technical leader will guide and grow these teams as well as be able to own parts of the design directly as the team scales. You and your teams will be responsible for architecting and developing custom Printed Circuit Board Assemblies (PCBAs), integrated sensing and RF solutions

Responsibilities - Electrical Engineering Manager

• Be the electrical engineering technical leader for ground systems design including low voltage electronics and PCBA development, power electronics and RF systems
• Build your teams by hiring and coaching world class engineers
• Design and validate to safety and certification standards
• Liaise with other technical leaders both within and outside of the Ground Systems Hardware
• Leverage your technical leadership experience in hardware design
• Establish best practices, standards, and design and release review processes

Experience and skillset - Electrical Engineering Manager

• 8+ years of demonstrated experience with electronics designs and system integration
• 2+ year leading a technical engineering team, and direct hiring management experience
• Working with products across various stages of development, from prototype - production
• Ability to operate in ambiguous and fast paced environments
• Experience in either Low voltage digital circuit design and/or power electronics design
• You’re hands-on with hardware; you know your way around tools

All successful Electrical Engineering Managers will be contacted within 2 days of application

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Manufacturing Manager at Reliable Robotics, you'll be responsible for manufacturing capacity and throughput, factory development and layout, leading a team of engineers and technicians, and improving our manufacturing processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will have overall accountability for the manufacturing output of a broad portfolio of products, including mechanical, electromechanical, and/or electrical/avionics assemblies. You will also be responsible for leading hiring activities, managing manufacturing layout, equipment maintenance, optimizing manufacturing flow, ensuring tooling and and working with engineering on design for excellence (DFx) improvements. They also handle workforce development, production scheduling, risk mitigation, and performance monitoring to meet production targets. You are responsible for establishing the standards by which this team would operate, and for transitioning the organization from a start-up into a disciplined manufacturing organization. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, testing, troubleshooting/diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, and interconnects

• Lead, coach, and provide technical mentorship to a team of engineers and technicians; write bi-annual reviews and manage the team's performance

• Lead hiring, recruitment, and training for the technician team

• Lead efforts to transition our products from engineering development to production

• Ensure design for excellence (DFx) is communicated to the engineering and drive implementations across all manufacturing areas to improve cost, producibility, inspectability, consistency, adequacy, accuracy, and achieve conformance to requirements

• Responsible for maturing the manufacturing factory and layout, including optimizing material flow, factory equipment (e.g., tooling, inspection, test, etc.) maintenance, tooling, automation, and business system

• Monitor and communicate manufacturing status and risks, and establish key performance metrics to meet manufacturing targets

• Partner with design, engineering, supply chain, and other departments to synchronize project plans and ensure manufacturing can meet demand

• Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Ensure root-cause analysis is implemented and timely corrective actions are taken to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 5+ years of manufacturing, design, and/or testing experience

• 3+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

• Strong leadership, communication, team-building, and problem-solving skills

Preferred Success Criteria

• Experience with assembly, machining, fabrication, soldering, Electro-Static Discharge (ESD), Foreign Object Debris (FOD), and test methods

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $130K - $195K

Engineering Drafting Manager – Mechanical Design & Documentation

Overview

We are seeking an experienced Engineering Drafting Manager to lead a high-performing team responsible for delivering accurate technical drawings, BOMs, and engineering documentation that support sales, operations, and customer-facing teams. This role combines technical expertise, team leadership, and process improvement to drive high-quality outputs, fast turnaround times, and continuous improvement within a regulated engineering environment.

Key Responsibilities

• Lead, mentor, and develop a team of engineers and drafters, driving performance in accuracy, quality, and delivery timelines.
• Facilitate daily SCRUM meetings to monitor KPIs, remove roadblocks, and improve workflow efficiency.
• Lead the transition and optimization of drafting tools, including migration from Visio to SolidWorks.
• Review incoming project requests to ensure design inputs are complete and aligned with user requirements.
• Track and analyze drafting metrics using dashboards to identify trends, improve throughput, and reduce bottlenecks.
• Own and improve BOM standards and labor assumptions in partnership with Engineering, Planning, and Operations.
• Create and maintain SOPs and work instructions aligned with quality system requirements.
• Act as a key liaison between Engineering, Sales, Customer Service, and Operations to maintain design intent throughout the order-to-build process.
• Review and approve drawings to ensure compliance with design standards, GD&T requirements, and revision control.
• Standardize drafting templates, symbols, and design libraries to promote consistency and best practices.
• Partner with cross-functional teams to ensure proper use of PLM and ERP systems.
• Lead continuous improvement initiatives focused on reducing rework and improving communication across departments.

Qualifications

• Bachelor's degree in Mechanical Engineering or related technical discipline.
• 10+ years of mechanical design or drafting experience, including 4+ years in a leadership role.
• Expert-level SolidWorks proficiency with strong knowledge of ASME Y14.5 GD&T standards.
• Proven experience creating and reviewing technical drawings for injection-molded or assembled products.
• Strong understanding of manufacturing methods, materials, and tolerance stack-ups.
• Experience working within ISO 9001 or similar quality environments.
• Proficiency with Microsoft Office tools and project tracking methods (Gantt charts, KPI dashboards).
• Familiarity with PLM and ERP systems (SyteLine or equivalent preferred).
• Excellent cross-functional communication skills and a strong attention to detail.

Preferred Experience

• Background in bioprocessing, medical device, or other regulated industries.
• Knowledge of ISO 13485 or IATF 16949 standards.
• Experience supporting Lean, Kaizen, or process optimization initiatives.
• Prior involvement in drafting software transitions or system upgrades.

Additional Details

• This position is 100% on-site in Camarillo, California.
• Travel requirement: up to 5% annually.

About Pinterest:

Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.

Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.

At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.

Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.

Pinterest helps Pinners discover and do what they love. Core Engineering touches every surface the Pinner sees across the app and forms the front-and-center of the Pinterest experience for 500M+ Pinners every month. The Core team's mission is to recommend inspiring & engaging pins for all our Pinners. We are looking for a Machine Learning Engineer Engineering Manager II who can drive the team's technical direction, strategic planning and execution. You'll have the opportunity to lead a team that works cross-team on various innovative projects of new product experiences, builds large-scale low-latency systems and state-of-the-art machine learning models, and delivers great impact to our pinners and business metrics.

What you'll do:

• 
  
• Be responsible for major areas of search, recommendations, notifications, etc for more than 500 million monthly active Pinterest users. Potential areas of impact include ML based retrieval, multi domain ranking, L1 modeling, candidate generators, sequence modeling, relevance modeling, and infrastructure efficiency and scalability.
  
• Deeply understand the Pinterest product and drive the vision for the team, ensuring the team's work directly contributes to the company's goals.
  
• Manage and mentor a team of Machine Learning engineers (L13 - L16), providing technical guidance and support to help them grow their careers. Identify team needs and hire strong candidates.
  
• Collaborate closely with other engineering teams at Pinterest to enhance the experience for users, including Advanced Technology Group, Infrastructure, Content Understanding and User Understanding.
  
• Provide visibility to senior leadership regarding the team's global impact.
  
• Partner with stakeholders across the company, including product management, data scientists, and design, to shape the future of the content ecosystem and personalization at Pinterest.
  
• Build a culture of excellence and expertise within the team.
  

What we're looking for:

• 
  
• MS/PhD in Computer Science, ML, NLP, Statistics, Information Sciences, related field, or equivalent experience.
  
• Experience leading and working on a large-scale production recommendation, e-commerce, search or ads systems that are based on state-of-the-art machine learning and big data technology.
  
• Strong experience in related fields such as recommendation systems and applied machine learning experience is required. Natural language processing and computer vision is a bonus.
  
• Demonstrated ability to define and drive the strategic roadmap for scalable, production-quality systems from concept to execution.
  
• Strong focus on product impact and user experience within a consumer-focused environment.
  
• Minimum of 1 year of experience managing a high-performing machine learning engineering team of 10+ members.
  
• 8+ years of experience in software development, with a proven track record of delivering impactful solutions.
  

Relocation Statement:

• 
  
• This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.
  

In-Office Requirement Statement:

• 
  
• We let the type of work you do guide the collaboration style. That means we're not always working in an office, but we continue to gather for key moments of collaboration and connection.
  
• This role will need to be in the office for in-person collaboration 1-2 times/quarter and therefore can be situated anywhere in the country.
  

#LI-REMOTE

#LI-DM57

At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.

Information regarding the culture at Pinterest and benefits available for this position can be found here.

Our Commitment to Inclusion:

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Production and Engineering Technician at Reliable Robotics, you will be a part of the Production organization. This is a small but growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You'll play a critical role in the build, operation, integration, test, diagnostics, inspection, and maintenance of highly reliable systems, including electro-mechanical assemblies, wiring harnesses, components, and subassemblies. You'll also help with the installation of those systems onto aircraft. Your work will support various product development phases such as prototype, research and development, aircraft certification, and recurring production. This is a fantastic opportunity to serve as the last line of defense for ensuring that our safety-critical systems are reliable and produced to the intended engineering requirements.

Responsibilities

• Build, operate, integrate, test, diagnose, inspect, and maintain highly reliable systems, including avionics and electromechanical assemblies, wire harnesses, and circuit card assemblies

• Read, interpret, and work from drawings, controlled documentation, and processes such as drawings, layouts, assembly procedures/work instructions, schematics, engineering drawings, and master parts lists

• Develop and improve manufacturing and installation instructions

• Assure product and process quality by testing finished-product and process capabilities

• Resolve product non-conformances and collaborate with the quality team to implement corrective actions

• Record work performed in a clear, precise, and complete manner

• Assist with the development of production and improvement processes

Basic Success Criteria

• 7+ years of professional experience building and testing electromechanical assemblies, fabrication, integration, or mechanical assembly experience

• 4+ years of hands-on experience reviewing technical designs and working from drawings, schematics, layouts, assembly/procedures, master parts lists, and other controlled documentation

• Ability to proficiently use a PC/Mac, Google Suite, manufacturing execution systems, JIRA, or equivalent tools

• Ability to lift 25-pound boxes to a height of 3-4 feet, with or without reasonable accommodation

Preferred Criteria

• IPC and/or J-STD certification

• Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or a high-volume manufacturing company

• Electro-mechanical assembly and prototype development experience

• Experience setting up and running tests and experiments

• Experience with electrical wiring

• Soldering experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel up to 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $125K - $145K

About Pinterest:

Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.

Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.

At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.

Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.

Pinterest is seeking an Engineering Manager to lead our User Understanding team. This team builds and maintains the data and backend systems that drive user modeling, personalization and recommendations-impacting hundreds of millions of users every day. You'll set technical vision, empower a talented group of engineers, and collaborate closely with Machine Learning, Product, and Data Science to unlock better user experiences. We're looking for a leader with deep infrastructure expertise, a passion for personalization and ML-driven experience, and a strong record of delivering ML-enabling platforms at scale.

What you will do:

• 
  
• Lead and mentor a team of experienced machine learning engineers in developing advanced user understanding models and systems, which are integral to key Pinterest products across Discovery, Ads, and Growth.
  
• Collaborate cross-functionally with partners in Product, Data Science, and Engineering to define strategy, set priorities, and effectively integrate user insights into core systems and product features.
  
• Drive experimentation and adoption of new user understanding models with product teams across Pinterest, ensuring measurable end-to-end impact on key metrics.
  
• Manage project execution and stakeholder communication, including roadmap planning, technical decision-making, risk mitigation, and progress updates to achieve business goals.
  
• Provide thought leadership in user modeling and recommender systems by setting a long-term technical vision and advancing the state-of-the-art in the field.
  
• Foster a collaborative, inclusive, and high-performing team culture.
  
  

What we're looking for:

• 
  
• 6+ years of industry experience in applied machine learning or closely related roles, with experience developing large-scale machine learning for recommendation or ads systems.
  
• 2+ years of people management experience leading engineering teams.
  
• Demonstrated ML expertise with a proven track record of impactful solutions and a deep understanding of large scale distributed systems.
  
• Strong technical leadership, including a passion for driving technical direction, system architecture, and designing robust, scalable ML solutions.
  

In-Office Requirement Statement:

• 
  
• We recognize that the ideal environment for work is situational and may differ across departments. What this looks like day-to-day can vary based on the needs of each organization or role.
  

Relocation Statement:

• 
  
• This position is not eligible for relocation assistance. Visit ourPinFlexpage to learn more about our working model.
  

#LI-AK7
#LI-REMOTE

At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.

Information regarding the culture at Pinterest and benefits available for this position can be found here.

Our Commitment to Inclusion: