Engineering Structures Journal Jobs in Wales, WI

MANUFACTURING PLANT IN WAUKESHA WI IS LOOKING FOR MANUFACTURING ENGINEERS. LOOKING FOR SOMEONE SHARP WITH CONTINUOUS IMPROVEMENT ENGINEER.

SHIFT: 7AM-330PM

SALARY: $73K-$94K + 5% TARGET BONUS

PTO: YOU GET 2 WEEKS AFTER 90 DAYS (5 PERSONAL/SICK DAYS & 5 DAYS PTO)Manufacturing Engineer

Core Responsibilities

• Develop and optimize manufacturing processes, routings, work instructions, and standard work to meet safety, quality, delivery, and cost targets.
• Lead continuous improvement initiatives focused on OEE, scrap reduction, labor efficiency, throughput, and productivity gains.
• Design and implement tooling, fixtures, automation, and poka-yoke solutions to improve process capability and repeatability.
• Analyze production data to identify bottlenecks and downtime drivers; lead structured root-cause analysis (5 Why, Fishbone, A3) and corrective actions.
• Partner with Quality to develop control plans, PFMEAs, Cp/Cpk studies, and standardized inspection methods.
• Support new product introductions through process development, equipment validation, pilot builds, and launch activities.
• Drive cost-reduction initiatives via cycle time improvements, material yield optimization, and value engineering.
• Collaborate with Operations and Maintenance to improve equipment reliability, preventive maintenance strategies, and uptime.
• Maintain accurate manufacturing documentation including BOMs, routings, standard times, work instructions, and process flow diagrams.
• Evaluate capital equipment needs, build ROI justifications, and manage installation and commissioning.
• Provide hands-on floor support to troubleshoot issues and stabilize daily production.
• Ensure compliance with safety, regulatory, and internal operational standards.

Qualifications

Required:

• Bachelor’s degree in Mechanical, Manufacturing, Industrial, or related Engineering discipline
• 3–7 years of Manufacturing Engineering or process improvement experience
• Strong understanding of process flow development and production optimization
• Experience with structured problem-solving methodologies (5 Why, Fishbone, A3, etc.)
• Proven record of improving productivity, quality, or cost in a manufacturing environment

Preferred:

• Experience in job shop or mixed-model manufacturing
• Familiarity with ERP/MES systems (NetSuite, SAP, Oracle, SmartFactory, etc.)
• Automation, robotics, CNC, or assembly experience
• Lean or Six Sigma certification
• Capital equipment implementation and ROI justification experience

Under the direction of the Engineering Manager, the Design Engineer is responsible for the support of new and existing products. This support may include, but is not limited to, product development, prototype generation, laboratory testing and problem solving, from concept to production.

ESSENTIAL DUTIES AND RESPONSIBILITIES

All employees work to satisfy the customer. Each department has expected core responsibilities, but these responsibilities do not define us. Rather, they simply provide a starting point where we work to satisfy the customer, and continuously improve ourselves, others, and the organization.

· Responsible for understanding the customer’s technical scope of work and delivering designs that meet or exceed expectations.

· Analyzes engineering sketches, specifications, data, drawings and models to determine design factors as well as tolerancing.

· Uses computer aided design tools for two- and three-dimensional magnetic analysis, computation fluid analysis, structural finite element analysis to develop and optimize designs.

· Designs for manufacturability

· Uses lab equipment such as force testers, multimeters, flow meters and environmental chambers to ensure products exceed customer requirements.

· Uses hand tool, soldering tools, and presses to build prototypes and customer evaluations

· Participates and/or leads design reviews and records meeting notes and lessons learned.

· Evaluates and approve design changes, specifications, and drawing releases to ensure compliance with both internal and external specifications and standards.

· Controls drawings, models, and other applicable documents.

· Shall utilize and improve engineering tools with the goal of creating and following consistent processes that ends with a predictable result. Examples of tools include Phase-Gate, FMEA, Control Plans, Engineering Change process, Tolerance Stack-up Calculations, Force Balances, Design for Manufacturing tools, Design Verification Plans, Process Validation, Capability Studies, Measurement System Evaluations, Quality Management and Production Part Approval Processes.

· Support sales staff by providing technical data to present to customers.

· Interface with other departments within and external customers and suppliers.

· Follows policies and procedures according to Quality Management System.

· All other duties as assigned.

Design Engineer

Behavioral

· Must have the potential to advance to Sr Design Engineer

· Proactive on tasks (Completes in a timely manner, uses tools to track task)

· Responsible (demonstrate that others can trust you)

· Demonstrates that he or she can be part of a solution (both technical and behavioral)

· Good verbal and written skills, in both a technical and non-technical environment

Demonstrated Competence:

· Good mechanical aptitude, and working knowledge of different materials (metals, plastics, etc.), coatings/finishes, and hardware.

· Good working knowledge of different manufacturing processes; CNC, injection molding, welding, turning, milling, etc.

· Good working knowledge of spring design

· Ability to support customer meetings and work directly with customers on design-related tasks.

· Ability to work with suppliers as it relates to prototype builds and associated changes and corrections.

· Able to design product(s) with input from others on lessons learned and best practices.

· Tends to work on projects, and not programs involving multiple designs and products.

· Participates in Root Cause analysis, DFMEAs, PFMEAs, Control Plans, Corrective Actions and other Quality activities.

· Understands the Cost of Goods (COGS) and how design impacts the material and manufacturing costs.

· Identifies design constraints and works with internal and external resources to resolve the constraints.

· Understands and utilizes all applicable processes and procedures.

Education and/or Experience:

· Bachelor's Degree (BS) from an accredited college or university in an Engineering related field or acceptable type and amount of work experience in a design role.

· 1-year design experience.

· Basic working knowledge of Microsoft Suite of products with a strong working knowledge of Excel.

· Demonstrated knowledge of SolidWorks or other 3D Modeling software.

· Experience with DFMEA, PFMEA, DOE, and other AIAG procedures preferred.

· Experience with magnetic analyses, computation fluid dynamics and finite element analysis preferred.

P+D Inc. a Walbec Group Company

Southeast, WI

Are you looking for an exciting career in road, highway, and bridge construction? P+D Inc. of the Walbec Group has a place for hard working, loyal, and driven people like you. Come work with us as a Paving Supervisor and enjoy a family-focused, progressive culture, and work with an industry leading company in heavy road and highway construction.

The Company:

The Walbec Group of companies is currently in its third generation of family leadership producing high-quality construction materials and delivering unparalleled professional design, engineering, and construction services.

• Named by Milwaukee Business Journal 2020, 2021 & 2022 as Best Place to Work.
• Associated with many exciting state, municipal, federal, and commercial projects. Check out our website for a complete list of interesting projects.
• Proud Partner of the Green Bay Packers.

The Position:

Under the direction of the Operations Manager, the Paving Supervisor is responsible for managing daily field paving activities, crew personnel and equipment scheduling, overseeing paving equipment repairs, and maintaining reinforcement of continuous safety and quality improvements.

Responsibilities:

• Manage the daily paving operations
• Lead employees on proper safety procedures
• Partner with the Operations Manager and HR Business Partner on employee relation matters as well as hiring of field crew personnel
• Coordinate equipment and pre-job planning to ensure appropriate equipment allocation on the job site
• Troubleshoot and correct laydown problems, mat blemishes, screed adjustments, etc.
• Possess understanding of density requirements to coordinate with quality control and technical services on resolving issues regarding mix or density properties in the field
• Possess a strong understanding of Wisconsin, state DOT specifications for HMA, Safety and CMV operation
• Act as a consultant for area management and purchasing on paving equipment acquisitions
• Foster relationships with external and internal customers by portraying leadership and professionalism, at all times
• Assist in the training of foremen, project managers and field crew personnel

The Benefits: Non Union Role

Team members at the Walbec Group are offered competitive pay and benefits that align with our values while supporting good health and a balanced life now and into the future. Additionally, we offer a range of opportunities for professional development and career growth that help us all to be successful.

We have the usual suspects like dental, vision, life, flex, EAP, PTO and holidays, but our favorites are the "no premium medical plan" and HRA contribution (with participation in wellness initiatives), company paid STD and LTD, 401k & profit sharing with company contribution and lastly, robust Walbec training.

The Location:

• Projects will vary by location throughout the Southeast WI local area, or the state, so reliable transportation and/or a willingness to travel to any job site is required as needed.

The Candidate:

• High degree of ethical standards in personal and business conduct.
• Self-directed and motivated; able to manage multiple conflicting and changing priorities.
• Minimum of 10 years of experience at the field level, laying and finishing HMA.
• Prior experience as a Foreman.
• Strong knowledge of rolling operations to achieve density requirements.
• Strong knowledge of paving equipment applications and equipment operations.
• Excellent verbal and written communication, consulting, conflict management, interpersonal, and negotiation skills.
• Valid Driver's License with a satisfactory driving record.
• Working knowledge of CMV guidelines and regulations.
• Trustworthy and discrete with confidential information.
• Adherence to anti-trust laws and regulations.

Why Should You Apply?

• Excellent wages and benefits packages.
• Job security-we are an essential company providing infrastructure services, and you are an essential employee.
• Growth opportunities working alongside and learning from experienced industry professionals.
• Be involved in innovative, cool projects throughout the local area and the state.
• Family-oriented, supportive culture.

We are an Equal Employment Opportunity (EEO) employer, and it is our practice to provide equal employment opportunities to all qualified applicants. In addition, it is the policy of the Company to comply with applicable federal, state and local laws governing nondiscrimination in employment in each locality in which the Company has employees. Women and minorities are encouraged to apply!

P-ECM

Now Hiring: Product Supervisor - High Voltage Testing — Prolec‑GE Waukesha

Location: Waukesha, WI | 100% Onsite | 1st shift | Monday - Friday

Ready to power up your career?

Prolec‑GE Waukesha is seeking a Product Supervisor - High Voltage Testing who thrives at the intersection of people leadership, experience with electrical engineering, high‑voltage safety, and technical decision‑making.

If you’re energized by guiding teams, ensuring strict safety compliance, solving complex electrical problems, and keeping operations running with discipline and precision — this could be your next big opportunity.

What You’ll Do

As our Product Supervisor - High Voltage Testing, you’ll be the leadership anchor in a high‑voltage testing environment where safety and accuracy are everything. Your impact will include:

Safety & Compliance Leadership (Top Priority)

• Enforcing high‑voltage safety rules, lockout/tagout, grounding, and test‑bay controls
• Leading safety briefings, risk assessments, and incident investigations
• Having the confidence and authority to stop work immediately when unsafe conditions arise

Team Leadership & Development

• Supervising a team of highly skilled test technicians
• Coaching, mentoring, and addressing behavioral or procedural deviations
• Building trust, communicating expectations clearly, and fostering a culture of accountability

Technical Oversight & Test Execution

• Overseeing daily test operations to ensure quality, accuracy, and adherence to approved procedures
• Troubleshooting test issues and coordinating closely with Engineering, Quality, and Manufacturing
• Making sound go/no‑go decisions under pressure — without compromising safety or compliance

Operational Excellence

• Maintaining accurate training, attendance, and documentation
• Identifying process gaps and driving improvements that enhance safety, consistency, and efficiency
• Supporting internal/external audits with strong attention to detail and documentation discipline

What You Bring

We’d love to meet you if you’re someone who has:

• A Bachelor’s in Engineering or Operations Management (or relevant experience with strong manufacturing leadership)
• Experience in electrical testing, high‑voltage environments, or an electrical mindset
• A leadership style that is confident, steady, empathetic, and able to hold firm boundaries
• Strong communication skills — able to stay calm, clear, and professional in fast‑paced, high‑risk situations
• A willingness to learn quickly, ask questions, and adapt to technical processes
• Working knowledge of Microsoft Office and comfort navigating manufacturing systems

Bonus advantages for experience with:

Transformers

Switchgear

Power distribution products

Electrical Engineering

Physical & Work Environment

This is a hands‑on, on‑the‑floor leadership role in a high‑voltage test environment. You’ll be:

• Moving throughout the manufacturing area
• Working near energized equipment (with full training & protections)
• Lifting up to 25 lbs as needed
• Splitting time between office tasks and shop‑floor oversight (best of both worlds)

Why Prolec GE Waukesha?

At Prolec‑GE Waukesha, you’ll step into a role where your leadership directly protects people, strengthens reliability, and supports the products that power communities across the country.

You’ll join a team that values collaboration, continuous improvement, and strong technical discipline — and you’ll grow your own leadership capability in the process.

Ready to energize your career?

Apply now and help shape the future of power transformation!

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

Job Title: Manufacturing Supervisor

Location: Waukesha, WI | 100% Onsite

Company: Prolec-GE Waukesha, Inc.

Employment Type: Full-Time 40+ hours | Long term | Permanent

About the Role

Are you passionate about driving operational excellence and leading high-performing teams? As a Manufacturing Supervisor, you will play a critical role in ensuring production goals are met while maintaining the highest standards of quality, safety, and continuous improvement. This is an exciting opportunity to lead a dynamic team, optimize processes, and make a measurable impact on our manufacturing operations.

What You’ll Do

• Lead and Inspire: Supervise and motivate your team to achieve production targets, maintain quality standards, and foster a culture of safety and accountability.
• Drive Operational Excellence: Monitor workflows, troubleshoot production challenges, and implement solutions that enhance efficiency and reduce costs.
• Champion Quality: Ensure compliance with manufacturing procedures and engineering instructions, investigate non-conformance issues, and take corrective action.
• Develop Talent: Participate in hiring, create training plans, and provide coaching and feedback to build strong, skilled teams.
• Promote Continuous Improvement: Identify opportunities for process enhancements and lead initiatives that align with plant goals.
• Ensure Safety & Compliance: Maintain a safe work environment, conduct investigations when necessary, and uphold company and union guidelines.

What We’re Looking For

• Bachelor’s degree with 3–5 years of manufacturing leadership experience (or equivalent leadership experience).
• Strong communication and problem-solving skills.

Preferred Qualifications:

• Degree in Operations Management or Engineering.
• Experience in a unionized environment.
• Background in engineered-product manufacturing.
• Proficiency in Microsoft Office.

Key Skills for Success

• Proven leadership and team-building abilities.
• Excellent interpersonal and communication skills.
• Strong analytical and decision-making capabilities.
• Commitment to safety, quality, and continuous improvement.

Why Join Us?

At Prolec-GE Waukesha, Inc., we value innovation, collaboration, and professional growth. You’ll have the opportunity to lead impactful projects, work with cross-functional teams, and contribute to a company that powers progress. We offer competitive compensation, comprehensive benefits, and a supportive environment where your ideas matter.

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

We are Generac, a leading energy technology company committed to powering a smarter world.

Over the 60 plus years of Generac’s history, we’ve been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries.

As a Digital Manufacturing Engineer, you will have the opportunity to use your digital toolset to solve some of Generac’s most complex manufacturing problems. You will be challenged to build innovative solutions that will free our manufacturing sites to focus on what they do best, while leading projects and mentoring others. This role is a member of our corporate Advanced Manufacturing team and is a key contributor in our digitalization effort.

Essential Duties and Responsibilities:

• Tulip app building with MES as key area of focus
• Integration of Tulip with enterprise solutions: SAP, CMMS. Etc.
• Design, implement, and maintain analytics and dashboards in Power BI and Tulip Analytics.
• Evaluate new solutions and support lab testing with onsite proof of concept activities.
• Support end of line test cell enhancements.
• On-call rotation for after hours support of applications deployed by Advanced Manufacturing team.
• Responsible for managing assigned project schedules and budgets.
• Ensure manufacturing data accuracy from responsible systems.
• Regularly conduct training and knowledge transfer sessions with operations team.

Minimum Qualifications:

• Bachelor's degree in engineering, Business, or Industrial Technology
• 5+ years of progressive manufacturing experience supporting operations technology.

Preferred Qualifications:

• Experience managing technical projects; including requirements, budgets, timelines, and changes.
• Proven track record of utilizing technology to drive manufacturing improvements.
• Ability to lead workshops with sites and key stakeholders to understand and document complex manufacturing requirements.
• Experience developing, deploying, and supporting manufacturing systems; specifically, MES. Includes others such as QMS, PLCs, SCADA, Data Historians, CMMS, and computer vision.
• Expertise with common OT programming languages such as Python, JavaScript, C# and/or others
• Experience working with SQL databases, writing complex queries, stored procs, functions, and triggers.
• Experience in OT integration technologies and standards including OPC and/or MQTT.
• Experience design and developing cloud-based data analytics and reports.
• Experience working with OPC servers and data tags.
• Experience integrating OT systems with enterprise solutions using REST API and similar.

Great Reasons to work for Generac:

• Competitive Benefits: Health, Dental, Vision, 401k and many more
• State-of-the-art facility with an onsite gym, walking trails, café, free parking and many employee activities
• Scheduled events throughout the year that allow our employees, both current and retirees, to gather together and enjoy their time with their families and co-workers
• Eligible for summer hours! (Memorial Day – Labor Day)
• Pride! When a storm strikes, Generac employees always rise to the occasion. Each time a storm hits many employees volunteer their time with the customer support team or on the production line while others go right into storm-affected areas to repair generators
• We believe in having fun. From minor celebrations to major events, our employees balance their work by building a strong culture of teamwork and collaboration through a variety of occasions, including our Fun Days.
• Every day is Jeans Day! Dress for your day.
• Product loan and discount programs

To formally apply to this position click here: You will not be considered an applicant until you complete online application.

Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel.

“We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

A manufacturing company located in Waukesha county is looking for a Quality Manager. This is a great opportunity to lead a team of Quality Techs and Engineers at a company that manufactures precision machined parts for some of the biggest names in the agriculture and heavy equipment industries

Responsibilities/Qualifications:

• MUST HAVE experience with high volume machining
• BS in Engineering or related field preferred
• Quality Certifications preferred (CQE, CQA, etc)
• Experience in metal manufacturing
• Maintain the company’s QMS
• Internal and Supplier auditing
• Familiar with quality measurement tools
• Continuous improvement mindset
• Ability to lead/develop Quality Technician and Engineers

Abilities, Inc.

Employee Policy Manual

Direct Care Staff Job Description

Position Requirements:

FREE TRAINING PROVIDED

NO EXPERIENCE NEEDED

Must be 18 years of age or older.

Must have achieved a High School Diploma or Equivalent.

Criminal Background Check or show proof of rehabilitation.

Must be available to work 8 hour shift every other Saturday and Sunday.

Must be Free and Clear of Communicable Diseases

Position Objective: To provide a safe, quality, professional, and caring service. You will be required to promote the highest level of independence and enhance the quality of life for all individuals that reside in Abilities, Inc. programs. This is all designed to ensure the best welfare, safety, and security for you, the community, and the clients that we serve.

Job Requirements:

• As an employee of Abilities, Inc. you may be asked to rotate to different facilities and program supervisors. You will be expected to be flexible with these changes as you are an employee of Abilities, Inc. and are not hired for any specific home.
• Supervise residents within all specifications set forth in their Individual Service Plans (ISP), Behavioral Support Plan (BSP), and Behavioral Intervention Plan (BIP). Employees will also need to be aware of and review Elopement Plans/Protocols, Seizure Protocols, Diabetic Protocols and anything else specifically pertaining to the residents they are supervising.
• Be a positive role model. Use positive encouragement, never degrade, and never portray actions that would contradict the best interest of the resident of Abilities, Inc.
• Provide a clean facility. Ensure that the facility is homelike and promote independence for the residents so that they will learn the skills to keep a clean home as well. It is your duty to ensure that residents have a clean and hazard free environment, please be aware of fire hazards in residents rooms. You will be required to assist and encourage residents to keep their personal living spaces clean in the event that they are unable or unwilling to do so themselves.
• Provide a professional attitude at all times towards residents, resident guests/family members, guardians, care managers, supervisors and fellow Abilities, Inc. employees. Show respect and consistency with program structure.
• Finish all tasks outlined by supervisors.
• Prepare meals consistent with the posted menu in the facility, and ensure sanitary methods are followed. Prepare special diets as ordered by residents physician. Grocery shopping and menu planning may be required. Encourage resident participation with all menu planning and meal preparation.
• Provide Personal Care Services as outlined in the residents Individual Service Plan (ISP). This may include lifting and transferring residents that would require your ability to use gait belts, adaptive equipment, and lifting up to 100 pounds. Please read and follow Abilities, Inc. Limited Lift Policy.
• Plan and participate in community and in-facility activities. An activity calendar will be posted in the facility at all times.
• Orientate yourself to Evacuation Procedures, Grievance Procedures, Program Statements, (These are provided in the facility on a designated wall) along with all Policy and Procedures outlined in the Employee Handbook.
• Attend all scheduled shifts and staff meetings. You will be expected to follow Abilities, Inc. Attendance policy (704) and take responsibility for your shifts.
• Communicate comprehensive and accurate reports through verbal and written skills. You will be required to use electronic charting and must be able to use a computer with some basic knowledge.
• Provide safe transportation for residents as delegated by your direct supervisor to work, community activities provided by the facility, personal care shopping/grocery shopping, to Adult Day Care services and to doctors appointments.
• Administer/monitor medications according to orders prescribed by Residents physician. Obtain knowledge of possible side effects and interactions the medications may have. This can be assessed through Extended Care Professional (ECP), Abilities, Inc. electronic charting for all medication administration and resident charting. You will also be responsible for shift to shift Schedule 2 medication counts, as an approved medication passer/monitor.
• Familiarize yourself to the State Requirements outlined in DHS 88 and DHS 83. There will be provided copies at the facility for you to review.
• Attend all training mandated by Abilities, Inc. Administration. As follows:

Before performing any job duties:

Orientation Training

Job Responsibilities

Prevention and reporting of resident abuse, neglect and misappropriation of resident property.

Information regarding assessed needs and individual services for each resident for whom the employee is responsible.

Emergency and disaster plan and evacuation procedures under s. DHS 83.47 (2)

Policies and procedures.

Recognizing and responding to resident changes of condition.

Prior to assuming any responsibilities:

Standard Precautions

Within 90 days after starting employment:

Resident Rights

Client Group Specific

Recognizing and Responding to Challenging Behaviors

Fire Safety

First Aid and Choking

Provisions of Personal Care

Dietary Training

Medication Administration and Management

Delegations

This includes your required 15 hours of Continuing Education (CEU Training) after your annual hire date. Failure to complete any training within the required timeline with result in suspension and/or termination of employment.

• Report any maintenance concerns to your program supervisor immediately, you will be asked to fill out a maintenance request form.
• You will be required to report any changes in condition immediately to your program supervisor and fill out the appropriate documentation.
• You will be responsible for logging yourself in and out when reporting and leaving work. You will be held accountable for reviewing your hours and reporting any discrepancies to your direct supervisor immediately upon realizing the error.
• You will be responsible to report any injury that occurs in the workplace immediately to your direct supervisor and complete the appropriate paperwork.
• You will be required to have an initial TB (Tuberculosis) skin test placed and read after 72 hours, prior to reporting for work. A 2nd TB (Tuberculosis) skin test will be completed within 2 weeks of your initial test.

I have read and understand the above job description. I am able to complete the above responsibilities with the following accommodations.

Wage at Hire: Date of Hire:

90 day Review Date: Annual Review:

_________________________ __________________________ ____

Staff Signature (Date) Abilities, Inc. Management (Date)

Compensation details: 15.5-17 Hourly Wage

PI527de4c8362b-26289-39768694