Engineering Structures Journal Jobs in Paintlick Virginia

• 
  
• Reports directly to the Assistant Foreman/Supervisor/Production Lead.
  
• Understands and follows PPE Policy.
  
• Lays out material utilizing drawings and blueprints prior to performing cutting/fitting operations.
  
• Maintains good housekeeping practices, turning off machines when not in use, disposing of waste
  properly, sweeping the area, etc.
  
• Ensures all tools listed on the \"Required Tools List\" are available for use within 30 days of employment.
  
• Acknowledging that all requirements of the Quality Assurance Manual are followed when invoked by
  QA Workbook.
  
• Identifies and notifies Supervisor of unsatisfactory conditions during the production operation.
  
• Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes as directed by the Supervisor/Lead Mechanic.
  
• Basic computer skills.
  
• Assumes responsibility for Contractor (CFM) and Government (GFM) furnished materials.
  
• Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.
  
• Understands fitting of structural components using dogs, wedges, strong-backs, etc.
  
• Strict adherence to safety, quality standards, good housekeeping habits, high level of critical
  thinking/reading.
  
• Travel and overtime are required.
  
• Work outside specific trade skill as required.
  

• 
  
• Work Experience: Minimum 3+ years of Shipfitter experience.
  
• Understands and performs the setup, and operation of various portable tools and hand tools used in the
  trade including plasma cutting machines and oxy/fueltorches.
  
• Has knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation
  practices, procedures, alignments, and material requirements), blueprint reading and interpretation,
  MILSPEC requirements.
  
• Must be able to fit structural components to tolerance requirements.
  
• Tack and Fillet Weld qualifications preferred (FCAW/SMAW).
  
• Must have the ability to gain access to military bases and various government facilities
  

• 
  
• Involves heavy lifting, frequent stooping, bending, crawling, reaching and possible working assignments in
  overhead structures, confined spaces or beneath machinery either indoors or outdoors in the elements and
  noisy conditions.
  
• Occasional lifting 50+ pounds.
  

• 
  
• This position is performed in a traditional office environment with local travel required between facilities.
  
• Work Shift Hours: 6am - 4:30pm (Mon. - Thurs.); overtime potentially on Fridays.
  

The Real Estate Portfolio Manager is responsible for managing and optimizing a portfolio of leased Family Dollar retail locations across a large national footprint. This role leads lease negotiations, landlord relationship management, and portfolio optimization initiatives designed to support store performance and improve occupancy economics.

The position partners closely with cross-functional stakeholders including Facilities, Legal, Lease Administration, Lease Accounting, Operations, Finance, and Real Estate Development to ensure alignment between real estate strategy and business objectives. The Real Estate Portfolio Manager leverages financial analysis, market knowledge, and negotiation expertise to structure agreements that support the long-term success of the Family Dollar store network.

Key Responsibilities:

Portfolio Management

· Manage a portfolio of leased retail store locations and serve as the primary point of contact for landlord negotiations and lease-related matters.

· Proactively monitor lease expiration schedules and develop negotiation strategies to support favorable lease outcomes.

· Evaluate opportunities for lease renewals, restructures, rent reductions, relocations, or early terminations in support of portfolio optimization.

· Maintain detailed records of negotiation activity and portfolio performance.

Lease Negotiations

· Lead negotiations with landlords for lease renewals, amendments, extensions, rent relief, and other lease modifications.

· Structure agreements that balance operational requirements with financial objectives.

· Coordinate with Legal and Lease Administration to ensure lease documentation aligns with negotiated business terms.

Financial Analysis & Business Alignment

· Analyze store-level financial performance and occupancy costs to inform negotiation strategies.

· Assess the financial impact of proposed lease terms, including rent, CAM, and other occupancy-related expenses.

· Support the development of strategies that improve store-level profitability and portfolio value.

Cross-Functional Collaboration

· Partner with internal stakeholders including Facilities, Operations, Legal, Finance, Lease Accounting, and Real Estate teams to support store operations and real estate strategy.

· Facilitate internal approvals and ensure alignment with company policies and processes.

· Communicate portfolio strategies and transaction outcomes to leadership and internal partners.

Portfolio Strategy & Optimization

· Identify underperforming locations and collaborate with internal partners to develop solutions that may include renegotiation, relocation, or closure strategies.

· Monitor market trends and landlord dynamics to support proactive portfolio management.

· Contribute to broader real estate initiatives that enhance portfolio performance.

Other duties as assigned.

Qualifications:

Education

· Bachelor's degree in Real Estate, Business Administration, Finance, or a related field required.

Experience

· 5+ years of experience in commercial real estate, retail real estate, lease negotiations, or portfolio management.

· Demonstrated experience negotiating commercial lease agreements.

· Experience managing multiple transactions or projects simultaneously.

Knowledge & Skills

· Strong understanding of commercial lease structures and retail real estate fundamentals.

· Ability to analyze financial data and understand store-level performance drivers and occupancy costs.

· Excellent relationship management skills.

· Strong organizational skills with the ability to manage competing priorities and deadlines.

· Proficiency with Microsoft Office applications, including Excel.

· Familiarity with lease administration or real estate management systems.

· Strong verbal and written communication skills

· Advanced negotiation skills with at least 3 years of proven track record of commercial real estate negotiations.

· Expert at adapting to change in a fast-paced environment

Family Dollar is an equal opportunity employer and committed to recruiting, hiring, training, and promoting qualified people of all backgrounds, and make all employment decisions without regard to any protected status. We are committed to complying with the Americans with Disabilities Act (ADA) and providing reasonable accommodations to qualified individuals with disabilities.

We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial sector. We are currently hiring skilled first-class Welders for multiple sites in the US. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! 

Essential Functions of this position may include but are not limited to:

• Ideal candidates will possess welding experience with GMAW, GMAW-P and SMAW
• Performs welding processes on carbon steel (OSS, HSS, HY, HSLA, etc.) assemblies to required tolerances using welding metals, metal alloys and with various joint configurations.
• Determines layouts and welds parts and assemblies according to engineering drawings and specifications.
• Oxy/Fuel pre-heat and carbon arc gouging, occasional mirror welding. Verifying weld size using weld gauges.
• Will monitor and verify quality in accordance with SSP's or MDD's.
• Requires occasional heavy lifting up to 45lbs multiple times during an 8 to 12-hour shift. 
• Requires standing and walking for extended periods during an 8 to 12-hour shift. 
• Requires occasional bending from waist, crouching, kneeling and crawling periodically during an 8-to-12-hour shift. 
• Requires occasional climbing ladders up to 25 feet at a time. 
• Requires occasional working in confined space work environment with the potential of extreme temperature exposure, chemical exposure, and radiation exposure during an 8-to-12-hour shift.

Please note that the essential job functions listed above are not intended to be all-encompassing. Employees may be asked to perform tasks which are not listed in this description but may also be considered essential for employment. The following physical requirements are essential job functions necessary to perform critical welding duties safely.

Qualification, education, and experience requirements:

• Minimum 3 years of related experience with High School diploma/GED and/or certification in assigned area preferred.
• Must be able to work independently with minimal supervision/oversight; have working knowledge of precision calibration tools (weld gauges), be able to operate multiple types of welding equipment, and possess good trouble shooting / problem solving skills.
• Highly motivated, self-starter with the ability to work multiple shifts.
• Able to read and interpret drawings, technique sheets and weld symbols.
• Ability pass respirator fit-check and wearing of respirator for portions of or all of an 8 to 12-hour shift or as required. Must be clean shaven for fit-check and dawning of respirator. Must be able to comply with respirator fit-testing requirements. Clean-shaven status may be required in accordance with OSHA respirator safety standards. Reasonable accommodations will be considered where required by law.
• Must be a team player. 
• Flexible, willing to work long hours, safety oriented.
• Experience with the fabrication of submarine parts and modules is preferred.

Weld Test Requirements:

• GMAW-SP & GMAW-P
• GMAW-P will be 3 position plate tests with MIL-100S-1 wire; GMAW-SP will be in 2G position with MIL-100S-1 wire.
• Welding tests will be bent immediately after the test 
• Further volumetric welding tests will be given to mimic hull penetration and liner installations.
• Successful completion of volumetric weld tests is required for X-Ray placement.

Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to medical, psychological (if required by site), background and substance abuse screening(s).

Work Authorization Requirements 

• Proof of Identification - Driver's license or any other identification card issued by the federal, state, or local government that contains a photograph and the person's name, date of birth, gender, height, eye color, and street address.

Proof of US Citizenship (must provide one)

• U.S. birth certificate (birth documents issued by a hospital, notifications of birth registrations; and Puerto Rico birth certificates issued before July 1, 2010, are not accepted
• Valid, unexpired U.S. passport or U.S. passport card
• U.S. Certificate of Citizenship or Certificate of Naturalization
• A record of Military Processing-Armed forces of the United States (Form DD 1966), provided it reflects U.S. citizenship.

U.S. citizenship is required for this role due to federal contract requirements. Due to federal contract requirements, U.S. citizenship is required for this position. Work authorization will be verified in accordance with federal law after a conditional offer of employment.

Compensation is determined based on experience, certifications, and client requirements. Summit Talent Strategies follows pay transparency principles. Compensation Range: $55.00 – $57.75 per hour, based on experience, certifications, and successful completion of required weld testing. Overtime and site differentials may apply.

All screenings are required by the federal contractor’s site‑specific safety protocols and are applied consistently to all applicants.

Summit Talent Strategies is an Equal Opportunity Employer. All qualified applicants will receive consideration for opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We affirmatively seek to advance equal opportunity for all. 

We will not discharge or otherwise discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Employees who have access to compensation information as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

We maintain applicant records and collect voluntary self‑identification information in accordance with applicable federal contractor affirmative action and record-keeping requirements.

Reasonable accommodations will be reviewed and provided in accordance with ADA and federal contractor requirements. If you are an individual with a disability and need a reasonable accommodation to apply or participate in the selection process, please contact   Please include the accommodation you are requesting and the job title.

• 
  
• Review and run CNC programs (lathe and mill) using G-code and CAM platforms.
  
• Set up CNC and manual machines using written instructions.
  

• 
  
• Perform the setup and basic operation of equipment, including lathes, mills, grinders, saws, and/or related shop machinery.
  
• Perform machining operations under supervision, using CNC and/or manual equipment as required.
  

• Read and interpret basic blueprints, drawings, manuals, GD&T callouts, and technical work documents.

• Accurately record measurements using metrology tools.

• Understand and follow all company, OSHA, and NAVSEA safety and cleanliness requirements.

• 
  
• High School Diploma/GED.
  
• Ability to perform basic machine operation, tool use, and measurements.
  
• Ability to read and interpret simple blueprints and drawings, and identify basic GD&T.
  
• Demonstrated working knowledge of shop math (e.g. convert between decimals and fractions, adding and subtracting decimals and fractions, basic trigonometry used for layout and measurements, etc.).
  
• Ability to use basic PMI, with assistance.
  
• Ability to follow setup instructions and run programs on one machine type.
  
• Must be a U.S. citizen who is not a dual citizen of any other country.
  

• 
  
• Experience machining submarine, aerospace, defense, nuclear, or similarly critical components in a precision or defense manufacturing environment.
  
• Introductory knowledge of CNC machine operation or programming (G-code familiarity a plus, but not required).
  

• 
  
• Demonstrates attention to detail.
  
• Strong communication skills with a collaborative mindset.
  
• Prioritizes safety and maintaining a clean and organized work area.
  

• 
  
• Primarily indoors during the day and occasionally at night.
  
• May require working on or near moving equipment and vibrating equipment.
  
• May be exposed to intense light from welding operations.
  
• Occasional exposure to open fire/flames/sparks from welding and grinding operations.
  
• Depending on the location, may require working in hot, humid conditions (above 90 F degrees) or cold (below 32 F degrees) temperatures.
  
• Includes exposure to sounds and noise levels that may exceed 85 decibels and require the use of hearing protection.
  

• 
  
• Lift 20-50 pounds.
  
• Work in confined spaces, kneel, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.
  
• Identify color differences.
  

• 
  
• Lift 10-25 pounds.
  
• Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.
  
• Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.
  
• Operate a motor vehicle.
  

• 
  
• Lift up to 10 pounds.
  
• Wear PPE protection as required for the conditions.
  
• Be able to recognize and react to alarms.
  

• 
  
• Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
  
• Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
  
• Conducts a variety of tests using established methods.
  
• Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
  
• Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
  
• Other duties may be assigned to include overtime work to complete production requirements.
  

• 
  
• High School diploma and 4 years prior related experience.
  
• Demonstrated ability to read and interpret cable assembly drawings.
  
• Demonstrated ability to read and execute hydrostatic pressure tank procedures.
  
• Ability to obtain L3Harris certification to operate forklifts.
  
• Must be able to lift up to 35 pounds independently.
  
• Must be able to traverse ladders.
  

• 8+ years of relevant experience with a degree (Required)

• 10+ years of relevant experience without a degree (Required)

• ServiceNow Architect Certification (Preferred)

• 10 to 12 years of ServiceNow experience over all ServiceNow experience (Required)
• Minimum 2 to 3 years of ServiceNow architect-level experience (Required)
• ServiceNow experienced, certified Architect
• Strong familiarity with ServiceNow Suite (e.g., ITSM, SPM, FSM, ITOM, IRM, EA etc) and platform wide analytics, AI, reporting and Virtual Agent a plus.
• Proven ability to communicate effectively with both business and technical stakeholders.
• Demonstrable ability to work independently, with a focus on best practice architectural design and analytical problem-solving and critical thinking.
• Familiarity with system/software engineering lifecycle principles, including requirements analysis, functional and technical solutions development, and application support.
• Experience working with large datasets, performing data analysis/modeling, and contributing insights for management decision-making.

• Bachelor's Level Degree (Required)

• Project Management Professional Certification (PMP) - (Preferred)

• 5+ years of experience in the Clinical/Business Sectors (Required)
• 5+ years of experience in Healthcare (Required)
• Proficiency with Agile frameworks, Databricks, Power BI, Tableau, and other modern analytics and visualization tools strongly preferred
• Demonstrated experience in project management and quantitative research design, preferably within healthcare, consumer experience, or call center domains.
• Proven success in process improvement, stakeholder management, team development, and change management initiatives.

• Design, develop, and maintain a customized SOAR solution that automates incident detection, analysis, triage, containment, and reporting.
• Collaborate with stakeholders to identify repetitive security tasks suitable for SOAR automation, improving efficiency and consistency in security operations.
• Integrate SOAR workflows with existing EDR, SIEM, and other critical platforms to enhance visibility and rapid response capabilities.
• Continuously tune SOAR playbooks to adapt to emerging threats, regulatory changes, or improvements in threat intelligence.
• Monitor all platforms for security incidents, leveraging SOAR for rapid, orchestrated response.
• Lead and support incident response efforts-from identification and analysis to containment, eradication, and recovery-with a focus on safeguarding Protected Health Information (PHI) and ensuring minimal impact to patient care.
• Analyze logs, forensic data, and network traffic across a complex healthcare IT environment.
• Develop and tune SIEM correlation rules, alerts, and integrated SOAR workflows to detect and respond to threats.
• Serve as part of a 24/7 on-call rotation, responding rapidly to incidents and escalations as they arise, including after-hours and weekends.
• Ensure incident handling and SOAR-driven automation align with HIPAA and all relevant regulations; participate in incident debriefs and continuous improvement initiatives.
• Collaborate with clinical, IT, compliance, and third-party vendors to assess risk and remediate vulnerabilities across critical systems and devices.
• Document incident response and SOAR automation actions in detail, maintaining records for legal, compliance, and audit purposes.
• Participate in healthcare-specific threat hunting, vulnerability assessments, and security exercises to strengthen organizational resilience.
• Maintain current knowledge of emerging cyber threats, SOAR technologies, vulnerabilities, and regulatory changes that could impact healthcare operations.

• Bachelor's degree in Cybersecurity, Computer Science, IT, or a related field; or equivalent experience.
• 3+ years of experience in a SOC, incident response, health IT cybersecurity, or SOAR engineering role.
• Excellent proficiency in Python
• Proven experience with SOAR implementation, EDR tools, and SIEM solutions, with preference for healthcare environments.
• Familiarity with HIPAA and healthcare risk management practices.
• Strong communication, teamwork, and documentation skills; able to communicate effectively with technical and clinical stakeholders.
• Availability to participate in a 24/7 on-call rotation and respond to security incidents outside of standard business hours.
• Relevant certifications (CISSP, CEH) are preferred.

• 3 years of relevant experience with a degree (Required)

• 5+ years of relevant experience without a degree (Required)
• Experience in lieu of a Bachelor's Degree

• Relevant certifications (CISSP, CEH) are preferred.

• 3 to 5+ years of relevant experience

Job description:

S. B. Ballard Construction Company, a leading General Contractor/Construction Manager servicing the Mid-Atlantic region, headquartered in Virginia Beach, VA is seeking an experienced Commercial Construction Estimator to join our team in Virginia Beach.

Essential Duties and Responsibilities:

• Analyze drawings, specifications, and project requirements
• Perform accurate quantity takeoffs from plans and specifications
• Prepare detailed cost estimates for labor, materials, equipment, and subcontractors
• Develop conceptual, preliminary, and final estimates during design development
• Identify cost-saving alternatives and value engineering options
• Assemble complete bid proposals and pricing summaries
• Solicit, review, and level subcontractor and supplier bids
• Collaborate and reconcile scopes with other members of the estimating team
• Ensure bids comply with project requirements, scope, and deadlines
• Participate in bid reviews and clarifications
• Identify potential risks, constructability issues, and scope gaps
• Prepare reports for management and clients
• Compare estimated vs. actual costs for continuous improvement
• Support negotiations during contract award
• Assist with client presentation preparation

Qualifications and Experience:

• Proven experience and knowledge of construction estimating, means and methods, accounting, and document administration
• Thorough understanding of construction industry materials and practices.
• Excellent communication and interpersonal skills required
• Proficient with Microsoft Office Suite, particularly Excel
• Experience with On Screen Take-off (OST)
• Experience with Bluebeam
• LEED certification is preferred but not required
• DBIA certification is preferred but not required
• Some periodic travel may be required

Current focus on eligible candidates residing within commuting distance of our Virginia Beach office.

The summary of essential duties and responsibilities listed above is not intended to cover all possible job duties and is subject to change at our discretion. The salary for this position is based on experience as well as a variety of other factors negotiated during the offer process. We are a drug free workplace and all applicants considered for employment must pass a post-offer drug screen and background check prior to commencing employment. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Type: Full-time

Work Location: In person (remote positions will not be considered)

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance