Engineering Structures Impact Factor Jobs in Wauwatosa Remote
1,238 positions found — Page 2
Quad's entry-level manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well-known magazines/catalogs/newspaper inserts and other related products in our Press department. Part Time Manufacturing wage is $17.50 / hr.
Shift Availability: 2-3 work week schedule
- Week 1- (2) 12-hour shifts (7 a.m. - 7 p.m. or 7 p.m. - 7 a.m.)
- Week 2- (3) 12-hour shifts
Job duties for this position include, but are not limited to:
- Remove product from the end of the printing press or finishing machine.
- Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
- Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
- Move product with a hand jack or motorized Raymond or Big Joe lift.
- Comply with all quality, safety and work rules and regulations.
- Effectively communicate with other members of the staff.
- Remove skids of product using a Big Joe and Hand Truck.
- Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
- Follow all clean-up and housekeeping procedures.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- At least 18-years of age or older
- A solid work history
- Ability to work well in a team environment.
- Ability to follow instructions and work independently.
- The ability to read and write; possess good verbal and written comprehension
- Strong interest in manufacturing and a desire to learn.
- The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
- The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
- Ability to lift stacks of end boards (30 lbs.) as needed.
- Lift rolls of banding strap (60 lb.) as needed.
- Moving logs as needed without lifting them (stand them up or lie them down)
- Ability to adjust stacker using a touch screen.
- Ability to use a vibrating jogging table.
- The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48” in height and transfer to tabletop work surface 42”, and then place into a collator hopper.
- Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
- The ability to use a hand jack or motorized Raymond or Big Joe lift.
- The ability to use a computer, scissors, and tape gun.
- The ability to read and write; possess good verbal and written comprehension.
- 12 hour shifts (7am-7pm or 7pm-7am)
Additional Shift Information
- Must be able to attend 1 week career readiness workshop from 9:30am-1pm
- Must be able to stand for your full 12-hour shift.
Quad is proud to be an equal opportunity employer and values diversity. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
Quad is committed to hiring hard working individuals through the Project Impact Trainee Program, looking for a career in manufacturing and providing support to remove barriers to employment. Partnership with Running Rebels, employees complete a (5) day paid career readiness workshop from 9:30am-1pm at our Quad MKE office, which provides support, resources and mentorship before starting at the Hartford Plant. Workshop includes building on soft skills, employability skills, conflict resolution, team building and financial literacy. Project Impact Trainee Program offers free transportation. Next new hire cohort start April 6, 2026.
Quad's entry-level manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well-known magazines/catalogs/newspaper inserts and other related products in our Press department. Part Time Manufacturing wage is $17.50 / hr.
Shift Availability: 2-3 work week schedule
- Week 1- (2) 12-hour shifts (7 a.m. - 7 p.m. or 7 p.m. - 7 a.m .)
- Week 2- (3) 12-hour shifts
Job duties for this position include, but are not limited to:
- Remove product from the end of the printing press or finishing machine.
- Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
- Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
- Move product with a hand jack or motorized Raymond or Big Joe lift.
- Comply with all quality, safety and work rules and regulations.
- Effectively communicate with other members of the staff.
- Remove skids of product using a Big Joe and Hand Truck.
- Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
- Follow all clean-up and housekeeping procedures.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- At least 18-years of age or older
- A solid work history
- Ability to work well in a team environment.
- Ability to follow instructions and work independently.
- The ability to read and write; possess good verbal and written comprehension
- Strong interest in manufacturing and a desire to learn.
- The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
- The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
- Ability to lift stacks of end boards (30 lbs.) as needed.
- Lift rolls of banding strap (60 lb.) as needed.
- Moving logs as needed without lifting them (stand them up or lie them down)
- Ability to adjust stacker using a touch screen.
- Ability to use a vibrating jogging table.
- The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48” in height and transfer to tabletop work surface 42”, and then place into a collator hopper.
- Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
- The ability to use a hand jack or motorized Raymond or Big Joe lift.
- The ability to use a computer, scissors, and tape gun.
Additional Shift Information
- Must be able to stand for your full 12-hour shift.
- Successfully complete 1 week Career Readiness Workshop
Quad is proud to be an equal opportunity employer and values diversity. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories.
Drug-Free Workplace
The Project Engineer I will prepare engineering calculations, design elements, and basic drafting under supervision.
This role will support project tasks while building professional expertise and confidence.
What We Offer Competitive salary and benefits package Opportunities for professional growth and advancement Collaborative team environment with experienced professionals Exposure to impactful transportation infrastructure projects
At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.
Are you a mechanical engineer who enjoys solving real-world problems, working hands-on with products, and contributing to designs that improve safety and performance? Join Rite-Hite's engineering team and help evolve our industry-leading vehicle restraint systems - including our flagship Dok-Lok product line.
This role offers a mix of product design, problem solving, and project-based work, with opportunities to contribute across product improvements, cost initiatives, and new development efforts as our roadmap evolves.
What You'll DoDesign and develop mechanical and structural components for vehicle restraint systems and related products
Create and modify 3D models, assemblies, and drawings using SolidWorks (or similar CAD tools)
Support product changes, enhancements, and new development projects across the product lifecycle
Collaborate with product management, manufacturing, supply chain, and testing teams to bring designs from concept through release
Select materials and components with consideration for performance, cost, and manufacturability
Participate in prototype builds, testing, and validation activities to ensure designs meet real-world requirements
Contribute to continuous improvement initiatives, including cost reduction (VAVE) and design optimization
Own small engineering projects or workstreams, helping drive progress from problem definition to solution
Bachelor's degree in Mechanical Engineering or a related field
2-3 years of post-graduation engineering experience in product design, development, or project-based engineering work
Hands-on experience designing metal components and fabricated parts (e.g., machined parts, structural components, weldments, brackets)
Proficiency in 3D CAD (SolidWorks preferred; Creo or similar acceptable)
Experience working on cross-functional engineering projects - beyond routine ECN-only work
Strong problem-solving skills and a practical, detail-oriented engineering mindset
Ability to communicate effectively and collaborate across disciplines
Experience with moving or mechanical systems (e.g., mechanisms, linkages, actuators, rotating components)
Exposure to new product development (NPD), VAVE, or stage-based project workflows
Experience with testing, validation, test plans, or tools such as DFMEA/FMEA
Familiarity with electromechanical systems or working alongside electrical engineers
Work hands-on with physical products in an R&D and test lab environment
Contribute to a mature but evolving product line with a clear roadmap and room for innovation
Be part of a flexible, collaborative engineering team where responsibilities may vary year to year
Gain exposure to a range of engineering work - from product improvements to early concept support - depending on business needs
What We Offer
At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:
Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.
Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.
Time for You: Paid holidays, vacation time, and personal/sick days each year.
Join us and build a career where you're supported - at work and beyond.
Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.
Job Title: Principal Mechanical Engineer – Refrigeration Controls
Job Summary
We are seeking a Principal Mechanical Engineer to join the Refrigeration Controls Product Engineering team. This role focuses on mechanical design, drawing development, product validation, and quality-driven engineering practices. The ideal candidate will have strong expertise in CREO, Windchill, SAP, GD&T, and experience designing sheet metal components, machined parts, and assemblies.
This position requires strong analytical thinking to lead design initiatives, support quality improvements, and apply structured problem-solving methodologies such as Lean and Six Sigma. The role plays a critical part in ensuring product integrity through testing, validation, and continuous improvement.
Key Responsibilities
Mechanical Design & Drafting
- Develop, modify, and maintain 3D models and 2D drawings using PTC CREO
- Design sheet metal parts, machined components, weldments, and assemblies
- Apply GD&T (ASME Y14.5) standards for accurate engineering documentation
- Lead design and drawing reviews with focus on manufacturability and quality
- Collaborate with Manufacturing and Supply Chain teams to improve DFM/DFMA
Quality & Part Validation
- Create and execute validation plans including functional, dimensional, and durability testing
- Utilize problem-solving tools such as 8D, DMAIC, and Ishikawa
- Perform root cause analysis for production issues and field failures
- Define inspection criteria with Quality and Testing teams
- Maintain documentation aligned with engineering and quality standards
Lean Manufacturing & Continuous Improvement
- Apply Lean and Six Sigma principles to optimize processes and reduce waste
- Participate in Kaizen events, PFMEA reviews, and process improvement initiatives
- Identify opportunities to enhance design, validation, and product performance
Configuration & Document Management
- Manage CAD data and workflows in PTC Windchill PLM
- Maintain BOMs, revisions, and part data in SAP ERP
- Prepare and manage Engineering Change Requests (ECRs) and Engineering Change Notices (ECNs)
Cross-Functional Collaboration
- Work with Manufacturing, Quality, Supply Chain, Testing, and Product teams
- Support prototype builds, trials, and pre-production validation
- Communicate technical information through reports and presentations
- Collaborate with global engineering teams to align standards
Required Qualifications
- Bachelor's degree in Mechanical Engineering (ABET-accredited)
- 5+ years of experience in mechanical design, product engineering, or quality engineering
- Strong proficiency in CREO Parametric and GD&T
- Experience in drawing creation, revision control, and assembly design
- Knowledge of validation testing and quality tools
- Strong communication and teamwork skills
- U.S. Citizenship required
- Willingness to travel up to 10%
Preferred Qualifications
- Experience with Windchill PLM and SAP ERP
- Knowledge of Lean Manufacturing and Six Sigma methodologies (Green Belt preferred)
- Experience in manufacturing environments and supplier collaboration
- Advanced skills in Microsoft Excel and Microsoft Project
- Familiarity with metrology tools and inspection processes
Principal Duties
1. Technical Leadership
- Lead design development and enforce CAD/drafting best practices
- Ensure documentation accuracy and compliance with standards
2. Test Planning & Execution
- Develop and execute validation test procedures
- Capture and analyze test data
- Prepare detailed test reports and communicate results
3. Mentorship & Training
- Train team members on GD&T, drafting, and validation techniques
- Provide guidance on quality and continuous improvement tools
4. Quality & Continuous Improvement
- Lead data-driven quality improvement initiatives
- Recommend design/process enhancements based on testing and feedback
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education:
Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience:
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master's Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Location Details: Remote - United States
At GoDaddy, the future of work looks different for each team. Some teams work in the office full-time, others have a hybrid arrangement (they work remotely some days and in the office some days), and some work entirely remotely.
This is a remote position, so you'll be working remotely from your home. You may occasionally visit a GoDaddy office to meet with your team for events or meetings.
This position is not eligible to be performed in Alaska, Mississippi, North Dakota, or the Virgin Islands.
GoDaddy is not currently considering candidates for this role in California, Seattle, or NYC.
Join our team
The GoCaaS (GoDaddy Content As A Service) team powers GoDaddy's generative AI platform. We enable internal teams to securely build, deploy, and scale AI capabilities across the company—driving innovation, productivity, and customer impact. Our platform supports 100+ large language models across multiple vendors (OpenAI, Google, Anthropic, AWS) with 99.99% uptime, serving thousands of employees and dozens of teams.
What you'll get to do...
- Lead and develop a high-performing engineering team delivering critical AI platform capabilities while mentoring engineers to deliver quality software efficiently.
- Partner with cross-functional teams (product, design, and engineering leaders) to define and execute the GoCaaS roadmap and strategic initiatives.
- Drive platform excellence by ensuring reliability, scalability, and optimal developer experience for internal AI consumers.
- Champion engineering best practices, including CI/CD, observability, and secure software development across the organization.
- Collaborate with enterprise teams (security, data, infrastructure) to deliver enterprise-grade AI solutions while fostering a culture of experimentation and technical excellence.
Your experience should include...
- 6+ years of software engineering experience with at least 2 years in engineering management or tech lead roles.
- Proven leadership of backend/platform teams delivering production-scale services.
- Strong cloud infrastructure knowledge (AWS, GCP, or Azure) and distributed systems expertise.
- Hands-on programming skills in Python, Go, or Node.js with CI/CD and observability experience.
- Leadership and project management abilities, including stakeholder management and cross-functional project delivery.
You might also have...
- AI/ML Infrastructure Experience - Working with LLMs, RAG systems, or broader AI/ML infrastructure.
- Container Orchestration - Familiarity with Kubernetes and Docker.
- Security & Privacy - Experience with secure data handling and privacy frameworks.
- Developer Platform Background - Experience building internal tooling or developer platforms.
- Leadership & Community Engagement - Passion for team building, mentoring engineers, and contributing to open-source initiatives.
We've got your back... We offer a range of total rewards that may include paid time off, retirement savings (e.g., 401k, pension schemes), bonus/incentive eligibility, equity grants, participation in our employee stock purchase plan, competitive health benefits, and other family-friendly benefits, including parental leave. GoDaddy's benefits vary based on individual role and location and can be reviewed in more detail during the interview process.
We also embrace our diverse culture and offer a range of Employee Resource Groups (Culture). Have a side hustle? No problem. We love entrepreneurs! Most importantly, come as you are and make your own way.
About us... GoDaddy is empowering everyday entrepreneurs around the world by providing the help and tools to succeed online, making opportunities more inclusive for all. GoDaddy is the place people come to name their idea, build a professional website, attract customers, sell their products and services, and manage their work. Our mission is to give our customers the tools, insights, and people to transform their ideas and personal initiative into success. To learn more about the company, visit About Us.
At GoDaddy, we know diverse teams build better products—period. Our people and culture reflect and celebrate that sense of diversity and inclusion in ideas, experiences and perspectives. But we also know that's not enough to build true equity and belonging in our communities. That's why we prioritize integrating diversity, equity, inclusion and belonging principles into the core of how we work every day—focusing not only on our employee experience, but also our customer experience and operations. It's the best way to serve our mission of empowering entrepreneurs everywhere and making opportunity more inclusive for all. To read more about these commitments, as well as our representation and pay equity data, check out our Diversity and Pay Parity annual report, which can be found on our Diversity Careers page.
GoDaddy is proud to be an equal opportunity employer. GoDaddy will consider for employment qualified applicants with criminal histories in a manner consistent with local and federal requirements. Refer to our full EEO policy.
Our recruiting team is available to assist you in completing your application. If they could be helpful, please reach out to
Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.
GoDaddy doesn't accept unsolicited resumes from recruiters or employment agencies.
Remote working/work at home options are available for this role.
