Engineering Structures Impact Factor Jobs in Monterey Park, CA

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

d24ad0b8-823f-4e68-a892-2986ccdf7392

Are you an experienced R&D Engineer with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced R&D Engineer to work at their company in Valencia, CA.

Position Summary: The manager is looking for a Sr R&D Engineer who would perform test method dev and validation, fixture and tooling design using SolidWorks, updates to product drawings using SolidWorks, as well as creation of traceable documentation, such as spec maps and DFMEAs.

Primary Responsibilities/Accountabilities:

• Ensuring all Design Controls aspects
• Developing new requirements, sourcing new requirements, creating and validating new test methods, creating new risk documentation, and performing all applicable testing
• Supporting manufacturing moves from one vendor to another.
• Maintains product safety, quality, and compliance of all products.
• Trained in all aspects of change management (DCA, SCIA, SCAR, and PLCP).
• Supports any applicable R&D projects, planning and activities.
• Understands and complies with all the regulations governing the quality system.
• Supports additional activities required by the business.
• Designing and developing new tools and fixturing using SolidWorks for use in test method development and validation.
• Build Quality into all aspects of their work by maintaining compliance to all quality requirements.
• Provides engineering support for design control activities.
• This position is a contract role, expected to be completed by the end of September 2026.
• Provides oversight of the design, quality, manufacturing, and project-related activities.
• Coordinates with internal functions and external suppliers to identify and execute projects.
• Applies project management and problem-solving skills to manage multiple activities concurrently. Develops products, materials, processes, or equipment for projects of moderate complexity. Under limited supervision/guidance, compiles, analyzes, and reports operational, test, and research data to establish performance standards for newly designed or modified products, processes, and materials.

Qualifications:

• 5+ years working with design controls.
• 5+ years working within FDA Quality System Regulations and ISO 13485.
• Experience with assessing quality and compliance impact on products for design and process changes.
• Experience with design verification and validation activities.
• Experience with Test Method development.
• Experience in troubleshooting and root cause analysis.
• Self-motivated individual who can work independently.
• Working knowledge of MiniTab and SolidWorks.
• Good writing (assessments, protocols, reports, and email) and verbal communication skills.

Preferred:

• Has led 4+ projects to drive product design changes or process changes preferred.
• 3+ years of mechanical design experience.
• Has participated in 4+ new product development projects, related product transfer and scale-up activities preferred.
• SAP and Windchill experience is a plus.
• Human Factors / Usability experience is a plus.

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Development Engineering Design Assurance is an all-encompassing role that provides technical oversight and guidance in support of Ride project teams. As Ride engineering experts, they lead the way when it comes to process, standardization, and overall design compliance. Design Assurance Engineers work alongside our project teams to provide experience, knowledge, and expertise to help advance our projects.

This role will work with the Executive Ride Development Engineering.

This is a full-time role.

What You Will Do:

• Serve as Mechanical Subject Matter Expert (SME) in the Ride Engineering design review process to ensure that appropriate engineering/design standards, methods, analyses, and judgment are applied so the engineered products meet the design intent and the business imperatives of safety, reliability, and efficiency.
• Review designs related to Ride Engineering products and provide feedback to project teams and functional management regarding the acceptability of those designs.
• Interpret and develop standards and codes that will be utilized by the Ride Engineering organization.
• Advocate global consistency of solutions for similar problems, and compliance with Disney and external standards.
• Partner with Disney leadership and project teams to improve process and standards for the benefit of future engineering efforts.
• Contribute to mentoring and talent development

Required Qualifications & Skills

• Advanced engineering knowledge (e.g., statics, dynamics, kinematics, stress/strain/fatigue).
• Advanced engineering expertise (e.g., machine design, weldments, power train, materials).
• Proficiency with engineering tools (e.g., Solid Modeling, Building Information Modeling (BIM), 2D Modeling, FEA, Engineering calculation software e.g. Mathcad, Engineering programming and modeling software e.g. MatLab).
• Superior design sensibilities and creative problem solving.
• Excellent written & verbal communication skills.
• Ability to work collaboratively within a large and diverse team environment.

Preferred Qualifications & Skills

• Previous Disney or entertainment experience, with advanced knowledge of the industry.
• Extensive experience with life safety design/requirements.
• Experience with prototype, development, and/or innovative products.

Education

• Bachelor's Degree (B.S. or B.A.) in Engineering from an accredited college or university required. (Mechanical Engineering preferred)

Additional Information:

Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at .

#DXMedia

Evergreen Posting
This is an evergreen position, meaning we are continuously accepting applications as we look to expand our talented pool of project engineers for future openings. If you are passionate about the renewable industry and want to make an impact with a company that values your contributions, this is the place for you. Even if a position isn't immediately available, your application will be reviewed for future opportunities as they arise. Interested candidates are encouraged to apply by submitting their resume and we will keep your application on file and reach out when an appropriate position becomes available.

Scope of Job
PowerFlex, an EDF Renewables company, is a leading national provider of intelligent onsite energy solutions that support carbon-free electrification and transportation. The Company delivers integrated solar, storage, EV charging, and microgrid systems, to businesses and organizations. As a single full-service provider, PowerFlex customizes clean technology solutions to help clients achieve their energy and sustainability goals. Through the comprehensive PowerFlex X platform, PowerFlex leverages patented smart software to control, monitor, and optimize a client's distributed energy resources to reduce cost and maximize return on investment.

The Project Engineer II will be responsible for providing technical support during the detailed engineering & construction stage of projects and will be exposed to all aspects of projects. Traveling on average once a week should be expected.

Location
This role would be supporting our projects in California and would be required to be a hybrid role out of one of our offices (Mountain View, CA,San Diego, CA, Los Angeles, CA. or New York, NY)

Responsibilities

• Design and engineer commercial and small utility-scale solar PV projects

• Communicate with utilities on an ongoing basis

• Stay up-to-date on code and policy changes that impact system design

• Coordinate cadence with customer during design phase and construction phase

• Coordinate design package with Engineering firms

• Coordinate with vendors and lead procurement of materials

• Perform inspections during the installation process

• Oversee commissioning process

• Assist in close out of projects with utility

• Perform production analysis for PV systems

• Assist Business Development team with pre-contract due diligence

Qualifications
Education/Experience

• Bachelor's Degree in Engineering (Civil or Electrical preferred) or related major

• 2-3 years of experience

• Excellent communication and organizational skills

• Detail-oriented and strong analytical skills

• Proficient in Helioscope, AutoCAD, PVSyst and Excel

• Understands permitting & interconnection process

• Basic understanding of financial modeling and incentive programs

• Experience with Procore and Salesforce a plus

• Computer Skills preferred: Salesforce, Microsoft Office applications, Microsoft Project knowledge, CRM, and Smartsheet

Skills/Knowledge/Abilities

• Ability to work independently, prioritize workload and deliver quality results on time while working on multiple projects simultaneously.

• Plan and organize tasks to consistently produce results, with minimal supervision.

• Acute attention to detail.

• Strong organizational skills.

• Commitment to excellence and high standards.

• Excellent written and verbal communication skills.

• Ability to deal effectively with a diversity of individuals at all organizational levels.

• Ability to successfully resolve conflicts both internally and externally

Compensation
The pay range for this position is $88,560 - $108,240 annually. This position is eligible for PowerFlex's comprehensive Health and Welfare plans including but not limited to medical, dental, vision, 401(k) retirement plan and paid time off. The total compensation for this position may include an annual performance bonus (or other incentive compensation, as applicable). PowerFlex's compensation packages carefully consider a candidate's qualifications, experiences, and education in relation to the position.

Physical Requirements
Remaining in a seated position. Long hours on the computer keyboard. Prolonged periods of standing and/or walking. Must be able to lift and carry or otherwise move 25 pounds regularly/occasionally.

Working Conditions
95% of time is spent in the office environment, utilizing computers (frequent use of various Microsoft software/programs), phones, and general office equipment. 5% of time is spent outside of the office visiting vendors' and/or internal customers' sites in addition to attending various conferences and meetings.

----------------------------------------------------------------------------------------------------------------------

Applicant Certification and Acknowledgment

By submitting this application, you are certifying that all information provided is true and complete to the best of your knowledge. You understand that any false, misleading, or omitted information may disqualify you from consideration for employment or result in termination if already employed. You also release the company from any liability resulting from your failure to provide accurate information.

DEI Statement

Our company-wide approach to diversity, equity and inclusion is focused on our workplace, community and business outcomes. We believe Diversity, Equity & Inclusion (DEI) is a key component to our mission of delivering renewable solutions and leading the transition to a sustainable energy future. As such, we strive to become a workplace that is diverse, equitable, and inclusive. Our aspiration is to build a culture of belonging and accountability by creating opportunities for growth and continuous learning to ensure progress.

EEO Statement

PowerFlex is committed to building a diverse and inclusive workplace. We are a proud Equal Opportunity Employer and prohibit discrimination based on age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation.

Privacy Notice to California Job Applicants

For information on Privacy Notice to California Job Applicants, click here.

Privacy Policy

PowerFlex is committed to protecting the privacy of your personally identifiable information, for more information click here.

Special Accommodation Language

If you require assistance or accommodation while seeking employment with PowerFlex, please contact Human Resources at or . Please note that these communication alternatives are for accommodation requests and not for general employment inquiries.

Southern California | Full-Time | Engineering + Field Integration

$130K – $160K DOE + Benefits

Confidential Client – Wireless Infrastructure & Public Safety Systems

We are seeking a Design & Compliance Engineer to lead in-building DAS and ERRCS engineering with a primary focus on California Title 24 and IFC Section 510 compliance. This is not just a commissioning role.

This position owns the technical integrity of the system from design validation through AHJ approval.

The ideal candidate ensures systems meet public safety code requirements, recommends compliant product solutions, prepares engineering submittals, and value engineers projects while preserving performance and inspection approval.

Primary Role Overview

This engineer serves as the technical authority on:

• Code-compliant system design
• Product selection & specification
• AHJ coordination
• Submittal preparation
• Coverage validation
• Value engineering
• You ensure systems are engineered correctly the first time and pass inspection.

Core Responsibilities

1. Engineering & Compliance Oversight

• Review and validate DAS / ERRCS RF designs for code compliance

• Ensure systems meet CA Title 24, California Fire Code (IFC 510), and local AHJ standards

• Validate minimum signal strength (-95 dBm or jurisdictional requirement)

• Ensure grid testing percentages meet jurisdictional coverage thresholds

• Confirm critical area coverage (stairwells, fire command centers, elevator lobbies, etc.)

• Interpret fire department amendments and jurisdiction-specific variations

• Interface directly with AHJs to resolve technical requirements

2. Product Specification & Recommendation

• Recommend compliant DAS / ERRCS equipment based on project conditions

• Evaluate OEM solutions (JMA, SOLiD, ADRF, CommScope, etc.)

• Ensure battery backup, monitoring, fiber/coax pathways, and survivability requirements meet code

• Prepare detailed Bill of Materials (BOM)

• Provide technical guidance to PMs and installation teams

3. Submittals & Documentation

• Prepare engineering submittals for AHJ review

• Generate RF design documentation using iBwave

• Provide compliance letters and engineering narratives

• Support permit submission packages

• Coordinate redlines and design revisions

• Produce acceptance testing documentation

4. Value Engineering

• Identify cost-efficient alternatives without compromising compliance

• Optimize amplifier placement and antenna layout

• Reduce overdesign while maintaining inspection success

• Provide technical trade-off analysis when necessary

5. Field Validation & Commissioning Support

• Conduct RF site surveys and grid testing

• Oversee commissioning and optimization

• Support final acceptance inspections

• Coordinate annual testing documentation as required

Required Qualifications

• 3-5+ years DAS / ERRCS / RF systems experience

• Strong understanding of wireless infrastructure and RF propagation

• Experience with commissioning, optimization, and troubleshooting

• Ability to interpret construction drawings and technical documentation

• Strong communication skills and field professionalism

• Valid driver's license & travel flexibility

Preferred Qualifications

• iBwave certification

• FCC GROL License

• NICET - In-Building Public Safety Communications

• DAS OEM Certifications (JMA, SOLiD, CommScope, ADRF, etc.)

• OSHA 10/30

• Fiber & coaxial termination/testing experience

What Makes Someone Successful Here

• Understands California compliance-driven DAS deployments

• Comfortable working between engineering and field operations

• Able to work directly with inspectors, fire officials, and project stakeholders

• Strong troubleshooting mindset with attention to detail

• Executes with accountability and professionalism

Why This Role

• Work on high-profile commercial & public safety projects

• Strong engineering support and stable project pipeline

• High-demand niche skillset (ERRCS / Title 24 expertise)

• Competitive salary + full benefits

Interested?

This is a confidential search. Apply or comment DAS on the post and we will reach out for more details and to discuss fit.

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Control Software Engineers work within Imagineering's Ride Engineering Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of ride control software design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.

The role of Ride Control Software Engineer Principal (Design Assurance) focuses on design, analysis, system safety, and verification across multiple projects, supporting project teams in critical engineering quality activities.

This role will report to the Executive, Ride Controls Software Engineering.

This position is located in Glendale, CA OR Orlando, FL.

This is a full time role.

Responsibilities:

Conduct design assurance activities in standards and best practices development, partnering with ride engineering partners across Disney Experiences and the amusement ride industry.

• Stay abreast of, and participate in the development of, company and industry standards and methodologies.
• Participate in company committees and industry organizations involved in ride safety and design.
• Maintain and improve engineering processes to meet project delivery and design assurance objectives.
• Conduct design assurance activities for ride project design review and testing, partnering with ride project team members.
• Review ride software designs for compliance with industry and company standards.
• Assess whether designs are of appropriate quality and meet project requirements.
• Advise project teams on optimal ride control software designs, safety analysis methods and results, and testing approaches.
• Mentor and train ride control engineers.
• Prepare and present Disney requirements and design practices for internal training.
• Advocate the processes, standards, and practices that produce quality designs.
• Mentor and assist design engineers with technical challenges, standards, and methodology.
• Mentor ride engineers in design excellence.

Basic Qualifications:

• At least 15 years of experience with ride control software design, engineering, installation, and commissioning
• Proficient in fail-safe and safety-related control system design
• Experience with requirements development, test plans/procedures, and test execution
• Extensive knowledge of ride control software architectures
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Proficient in automated control software design applying functional safety concepts and standards
• Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Solid skills in technical document writing and communication
• Ability to travel domestically and internationally for 1-week to 3-month durations
• Ability to handle multiple complex efforts simultaneously, exert influence, and manage tasks and priorities

Preferred Qualifications:

• Knowledge of amusement industry standards applicable in US, Japan, France, Hong Kong, and China
• Proficient in Rockwell, Siemens, and Beckhoff automation software architecture and components
• Expertise in motor and motion control methods and components
• Solid understanding of kinematics as it pertains to ride systems and machines
• Knowledge of pneumatic controls and devices
• Knowledge of modeling methodologies using UML/SysML
• Experience with multitasking software platforms and design approaches
• Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)

Required Education:

Bachelor of Science Degree in an engineering field from an accredited university required.

Additional Information:

Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at .

#DXMedia

Job Description

About The Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Control Hardware Engineers work within Walt Disney Imagineering's Ride Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of control system design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.

The Ride Control Hardware Engineer will report to the Ride Control Systems Engineering Executive.

This is a full time role.

What You Will Do:

• Support programmable, electrical, and electronic hardware scope to design and deliver control systems for complex, innovative ride systems
• Perform engineering design and analysis for ride systems, focusing on electrical control systems
• Develop control system and network architectures
• Design, model, and analyze electrical supply systems
• Research new products, technologies, and methodologies
• Lead a team of ride control engineers and collaborate with other professionals to develop ride control systems
• Develop control equipment requirements and specifications
• Develop and implement proof-of-concept mock-ups and prototypes
• Conduct hazard assessments and failure modes and effects analysis
• Manage vendors, contractors, and consultants developing and implementing ride control systems
• Define and oversee supplier and consultant design and delivery
• Ensure all delivery and performance requirements are satisfied
• Conduct factory acceptance tests and ride system installation

Required Qualifications & Skills

• 5+ years of Controls Experience
• Experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Extensive knowledge of electrical design standards and codes, including UL508a and NEC
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Expertise in motor and motion control methods and components
• Ability to travel domestically and internationally for 1-week to 3-year durations
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Licensed professional engineer
• Proficient with engineering design tools including AutoCAD, Matlab, Simulink, Solidworks, EPLAN
• Proficient in Rockwell and Siemens automation systems architecture and components
• Electrical and troubleshooting skills (voltmeter, oscilloscope, etc.)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at .

#DXMedia

Field Applications Engineer – Aerospace & Space Systems

Location: Los Angeles, California, United States

A leading developer of rugged embedded computing systems used in aerospace, defense, and space applications is looking for a Field Applications Engineer to support customers across the United States. This role acts as the technical bridge between customers, engineering teams, and business development, helping aerospace and defense organizations integrate mission-critical computing solutions into their systems.

Responsibilities

• Serve as the primary technical point of contact for US customers.
• Provide pre-sales and post-sales technical support across aerospace, defense, and space programs.
• Work with customers to define system requirements and identify appropriate solutions.
• Deliver technical presentations, product demonstrations, and customer workshops.
• Collaborate with engineering, operations, and program teams to resolve technical challenges.
• Support business development by helping translate customer requirements into technical solutions.
• Contribute to technical documentation, including application notes and integration guidance.

Requirements

• 5+ years of experience in embedded hardware or software development/support.
• 3+ years in a customer-facing engineering role (Field Applications, technical sales, or field engineering).
• Bachelor's degree in Electrical Engineering, Computer Science, or related field.
• Strong understanding of embedded computing systems.
• Ability to communicate technical concepts clearly to customers and internal teams.

Due to regulatory requirements, candidates must qualify as a U.S. Person under ITAR regulations.

Preferred Experience

• Aerospace, defense, or space industry experience.
• SpaceVPX or cPCI architectures.
• ARM or PowerPC processor architectures.
• Embedded operating systems such as VxWorks or Linux.
• NVIDIA embedded GPU platforms.

Why Join?

• Work on mission-critical computing systems used across land, air, sea, and space.
• Collaborate with major aerospace primes and innovative space companies.
• Join a company at the forefront of embedded computing technology.

Due to the number of applicants, if you have not received feedback after 2 weeks of applying, then unfortunately, you have been unsuccessful.

Job Summary

Under the direction of the Lead Automotive Account Manager - West Coast, the SOCAL Automotive Sales Engineer is responsible for maintaining current customer relationships and identifying areas for potential growth with established and new customers in the electric vehicle market. The primary role will be serving as the key account manager for a major electric vehicle company with responsibility for several smaller accounts. The role is responsible for being the main point of contact for communication regarding product selections and opportunity generation. This position is based primarily in the SOCAL area, with travel to the West Coast region as required. This individual will work with a cross-functional team, including sales, project management, product management, and engineering, to achieve success. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Essential Functions:

• 
  
  
• Serve as the key account manager for SOCAL automotive vehicle customers.
  
  
• Coordinate and align domestically and globally for relevant opportunities as required.
  
  
• Expand HellermannTyton's position in low-voltage, high-voltage vehicle electrification systems as well as fluid routing opportunities.
  
  
• Uncover opportunities in standard, platform-based, and custom products
  
  
• Attend and lead selected customer-facing meetings to drive opportunities to specify HellermannTyton's products.
  
  
• Support overall business direction as set by automotive sales and marketing leadership with vetted information and strategic clarity to ensure key activities are moving forward.
  
  
• Work with customer engineering teams to assess standard plastic fasteners/clips for wiring harnesses and fluid routings, offer substitutions, and deliver new, improved offerings.
  
  
• Use understanding of technical drawings, documents, and automotive testing requirements to convert information into recommendations and next steps to achieve the specification.
  
  
• Understand and have full knowledge of OEM specifications for standard parts and leverage that to gain market share.
  
  
• Follow and improve process flows to enable efficient multi-stakeholder direction and understanding of key actions and commitments.
  
  
• Manage customers current and upcoming platforms and develop sales plans in line with customers goals
  
  
• Maintain familiarity with competitors' products and identify opportunities
  
  
• Effectively communicate status, actions, milestones, and activities to key stakeholders.
  
  

Other Functions:

• 
  
  
• Ability to discern opportunities and roadblocks to the goals of a project and drive results for increased sales.
  
  

Qualifications (skills, knowledge, experience)

• 
  
  
• BS from an accredited four-year college or university, engineering discipline preferred, or equivalent experience in lieu of degree
  
  
• Excellent knowledge of the Microsoft Office Suite.
  
  
• 5+ years of professional experience demonstrating mechanical and engineering aptitude, along with successful key customer responsibility
  
  
• Automotive Industry Experience required
  
  
• Knowledge of plastic fasteners is preferred
  
  
• Must have a valid driver's license, acceptable driving record, and adequate insurance
  
  
• Minimal travel involved
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Senior Java/Kotlin engineer
Remote
6+ Month Contract: $70-$80 per hour
Our client is in search of a Senior Java Engineer for a 6+ month contract. You will lead the development and testing of our systems and services Participate in shaping the technical architecture of the product Help translate product requirements into user stories and technical solutions Deliver highly available and scalable services in a production environment Mentor other engineers, support the technical culture, and help grow the team Generate ideas for new initiatives and technologies Communicate with project leads, product managers and other software developers

• Systems Development: Lead and participate in the development and testing of our systems and services.
• Requirement Translation: Help translate product requirements into user stories and actionable technical solutions.
• Production Delivery: Deliver highly available and scalable services in a production environment.
• Cross-Functional Collaboration: Communicate effectively with project leads, product managers, and other software developers.

• Education: Bachelor's Degree in Computer Science or a related field.
• Experience: 4+ years of programming experience, ideally using a modern stack.
• Backend Expertise: 2+ years of experience with Java or Kotlin.
• Core Stack Knowledge: Familiarity with our environment ( Java/Kotlin, Spring, PostgreSQL, React) running on Kubernetes within a service-oriented architecture (100+ services).
• Database Proficiency: A solid understanding of relational databases and ORMs.
• Architecture: Experience working on SOA or microservice-based applications.
• Quality Standards: View Unit and Integration tests as first-class citizens in the software development lifecycle.
• Collaborative Workflow: Experience refining designs, performing code reviews, and managing pull requests in a team environment.
• Ownership & Mindset: * A solid sense of responsibility and the ability to drive projects from inception to completion

• Full-Stack Experience: Additional expertise in any of the following areas:
  • Systems: Kafka, Temporal, Docker, POSIX.
  • Databases: Deep PostgreSQL knowledge.
  • Front-End: JavaScript/TypeScript, React.

We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.