Engineering Structures Elsevier Jobs in Ames Lake Washington
28 positions found — Page 2
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications:
Experience inspecting welds / welds certification
Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 27, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.
As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems. Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems. You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
* Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.
* Obtain necessary engineering drawings for assigned jobs if not included with the order.
* Initiate planning or engineering change requests for pre-planned jobs as required.
* Set up assembly tools according to instructions and ensure correct locators for model configurations.
* Hand fit parts using jigs and tools to ensure proper alignment and fit.
* Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.
* Deliver completed details to the appropriate work area for further processing.
* Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.
* Drill and ream holes in parts and assemblies according to drawing specifications.
* Apply sealants, primers, and adhesives as required by work orders and specifications.
* Handle and dispose of hazardous materials safely, following approved procedures.
* Obtain the correct type and size of fasteners from the roto-bin per specifications.
* Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.
* Measure and cut tubing to close tolerances, and swage tubing as necessary.
* Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.
Physical Demands and Potential Hazards:
* Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
* Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
* Work in environments that may involve contact with metals, solvents, and coolants.
* Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
* Adapt to varying noise levels and atmospheric conditions.
* Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
* 1+ years of experience working with powered hand tools
* 1+ years of experience working with precision measuring tools
* Computer proficiency including Microsoft Office Suite
* 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
* 1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawings
* Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 30, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities
Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes
Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.
Determine and/or develop methods where procedures may not be available.
Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
Operate, use and maintain overhead maintenance work platforms
Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
Inspect and maintain building runway rails and expansion joints.
Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
Maintain logs, charts, and perform written and verbal tie-in records.
Prepare reports and schedules as required.
Work with and assist employees of other classifications as required.
Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances
2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.
This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
Able to lift up to 35 pounds.
Preferred Qualifications:
Experience inspecting and maintaining building runway rails and expansion joints.
Preference given to those with 2 years overhead crane experience.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: 33.32 – 61.01
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
Job Title: A&P Aircraft Mechanic
Location: Puyallup Wa.
Job Type: Full-Time
Reports To: Maintenance Supervisor
About Us:
Join SpanaFlight LLC., a leading institution dedicated to training the next generation of pilots. Our fleet of general aviation aircraft is maintained to the highest standards, ensuring safety and efficiency for all training operations.
Job Overview:
We are seeking a skilled A&P Aircraft Mechanic to maintain and repair our fleet of general aviation aircraft. The ideal candidate will have strong technical skills, a keen eye for detail, and a commitment to ensuring the safety and reliability of our aircraft.
Responsibilities:
* Perform routine maintenance, inspections, and repairs on a variety of general aviation aircraft.
* Diagnose mechanical and electrical issues and implement effective solutions.
* Ensure compliance with all FAA regulations and industry standards.
* Maintain detailed records of all maintenance work.
* Collaborate with flight instructors and school staff to address maintenance needs.
* Conduct pre-flight and post-flight inspections to certify aircraft safety.
* Participate in continued education and training to stay updated on industry developments.
Qualifications:
* Valid FAA Airframe and Powerplant (A&P) Certificate.
* No minimum of experience in general aviation aircraft maintenance.
* Comprehensive knowledge of aircraft systems, including engines, hydraulics, and electronics.
* Strong problem-solving skills and attention to detail.
* Ability to read and interpret maintenance manuals and technical drawings.
* Excellent communication skills and a team-oriented attitude.
Preferred Qualifications:
* Experience with specific aircraft models in our fleet (e.g., Cessna, Piper).
* Additional certifications or endorsements related to aviation maintenance.
* Familiarity with computerized maintenance tracking systems.
Benefits:
* Competitive salary based on experience and qualifications.
* Opportunities for continuing education and professional development.
Job Description
Maintenance Manager
Purpose
We are seeking a hands-on, people-focused Maintenance Manager to lead and strengthen our maintenance operations across our multiple manufacturing facilities. This role is ideal for a leader who enjoys being on the floor, developing people, and building reliable systems that keep production running safely and efficiently. You will play a key role in improving equipment uptime, reducing unplanned downtime, and creating a proactive maintenance culture.
Who You Are
You are a driven Maintenance Manager who takes pride in building strong teams and reliable systems. You lead by example, value safety above all else, and enjoy solving problems at the root cause. You are comfortable balancing day-to-day maintenance needs with longer-term reliability improvements. You are not just looking to maintain equipment, you want to build a maintenance operation that supports growth, automation, and continuous improvement. You want to be part of a company where quality, teamwork, and continuous improvement are part of the culture.
What You'll Do
* Lead, coach, and develop a team of maintenance technicians and a maintenance coordinator, setting clear expectations, routines, and accountability.
* Build, execute, and continuously improve a preventive maintenance program that reduces reactive work and increases equipment reliability.
* Own maintenance planning and scheduling, including work orders, weekly schedules, backlog management, and coordination with Operations to minimize downtime.
* Serve as the owner of the CMMS, ensuring data accuracy and using KPIs such as PM compliance, planned work percentage, downtime trends, MTBF, MTTR, and maintenance costs to drive improvement.
* Lead root cause analysis on major failures and recurring downtime issues, implementing permanent corrective actions.
* Manage spare parts strategy including critical spares, inventory levels, standardization, and vendor relationships.
* Champion maintenance safety by enforcing LOTO, safe work practices, and regulatory compliance.
* Partner with plant leadership, Operations, and Engineering on reliability upgrades, capital projects, and equipment improvements.
* Support automation and robotics initiatives by ensuring maintainability, reliability standards, and strong commissioning practices.
What You Bring
* 7 or more years of progressive maintenance leadership experience in a manufacturing environment or equivalent experience.
* Proven success in reducing downtime & building effective preventive maintenance & planning systems.
* Strong mechanical and electrical troubleshooting knowledge with the ability to support automation and controls as needed.
* Experience using CMMS to track performance metrics that drive accountability.
* Strong people leadership skills with a track record of developing and coaching maintenance teams.
* Experience managing vendors, contractors, and maintenance budgets with a ROI-focused mindset.
* A strong commitment to safety leadership and compliance with OSHA, LOTO, and safe work practices.
Why Bellmont
At Bellmont Cabinets, we don't just build cabinets—we build careers. We invest in our people through training, advancement opportunities, and a collaborative environment where your skills make a real difference. You'll join a team of professionals who are proud of what they do and passionate about craftsmanship.
Benefits include:
* Competitive compensation with bonus potential
* Full health, dental, and vision coverage
* 401(k) with company match
* Paid time off and holidays
* Career growth opportunities
* A clean, safe, supportive work environment
Bellmont Cabinet Co. is an Equal Opportunity Employer
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Helper Manufacturing to join our Fabrication team in Algona and Auburn, Washington.
Join our innovative manufacturing team as a Helper, where your contributions will play a vital role in the production process. In this dynamic position, you will utilize a variety of hand and power tools to perform essential tasks such as sorting, cleaning, and preparing parts for assembly and finishing. Your attention to detail will ensure that identification markings are accurately applied, while your organizational skills will help maintain a clean and efficient workspace. You will collaborate closely with skilled employees, assisting in mechanical and paint duties, and ensuring safety protocols are followed in high-stakes environments. Your ability to operate specialized equipment, such as the video jet marking machine and anodizing processes, will be crucial in supporting our production goals. If you are passionate about contributing to a team that values quality and precision in manufacturing, we invite you to be a part of our mission to deliver excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform various duties using hand or power tools, including staking, filing, trimming, sawing, buffing, drilling, sanding, and filling to facilitate assigned tasks.
Sort, count, wrap, unwrap, and clean parts, tools, assemblies, or equipment as required.
Maintain cleanliness and organization of work areas by sweeping, cleaning, and picking up materials and parts.
Move, pack, and unpack boxes, materials, parts, tools, and equipment, ensuring proper handling and storage.
Apply identification numbers or letters (part marks) to parts, materials, or assemblies using various marking methods (e.g., steel, rubber, electro-etch).
Rack and unrack tubes and materials, applying dust caps and seals, and verifying configuration discrepancies against samples.
Assist higher classification employees with mechanical and paint duties, including filling pots, moving lifts, and setting up/removing painting equipment.
Maintain surveillance in paint and assembly areas, ensuring safety procedures are followed and assisting incapacitated employees as needed.
Perform masking processes, including applying masking tape and protective materials to parts in preparation for painting or plating operations.
Finish contoured and flat surfaces to required specifications using abrasive materials prior to and after painting, including hand touch-ups.
Clean and service paint spray application equipment, including tanks, brushes, and hoses, after use.
Review Work Orders (WOs) and drawings to determine work requirements and obtain necessary tools and specifications using online computing equipment.
Operate and maintain the video jet marking machine, ensuring proper fluid levels and cleanliness of heads.
Assist in the anodizing process by loading and unloading detail parts on/off the load bar and performing low-pressure tests on tubing.
Count, load, and protective wrap finished production parts for shipment to the next operation, and log completed jobs into the Decac MRM system.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift
Must have basic computer experience and competency skills
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily second shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $21.32/hour, with potential to earn up to $48.70/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 25, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
What Your Day-to-Day Looks Like
- Build Lasting Relationships: Connect with clients and their pets, becoming their trusted partner in a pet's lifelong health.
- Practice Your Best Medicine: From diagnosis to treatment, you'll lead patient care with the freedom to uphold the highest standards.
- Educate and Empower: Clearly communicate findings and treatment plans, empowering clients to make informed decisions.
- Collaborate and Grow: Work alongside a supportive paraprofessional team, contributing to a positive hospital culture.
- Doctor of Veterinary Medicine (DVM) degree.
- A valid state license and in good standing to practice.
- A collaborative spirit and a dedication to practicing the highest standard of medicine.
- Excellent communication skills with a positive, friendly attitude.
How You're Supported
As part of the Mission Pet Health family, you get the autonomy of a local practice backed by the comprehensive benefits and resources of a larger network. The focus is on investing in you, so you can focus on what you love.
Generous CompensationCompetitive base salary and a monthly production bonus with no negative accrual.
Total WellbeingComprehensive coverage including Health, Dental, Vision, and more, plus Maternity Leave and 24/7 TeleDoc access.
Financial HealthPlan for your future with a 401k featuring a generous company match, plus Long & Short-Term Disability insurance for peace of mind.
Commitment to GrowthReceive a yearly CE allowance with dedicated paid days off. Grow with leadership tracks and structured mentorship.
The Power of a NetworkTap into a nationwide community of over 20,000 veterinary professionals for collaboration and to explore your unique interests.
Peace of MindCompany-paid Professional Liability Coverage, so you can focus on what you do best: practicing great medicine.
About Mission Pet HealthMission Pet Health was founded by veterinarians on the belief that local practices thrive with clinical autonomy, collaboration, and medical excellence. The organization provides world-class support to its 850+ hospital teams on a hyper-local basis so they can focus on what matters most: the medicine, their patients, and their team culture. Learn more at .
Driving the award-winning culture are the WAG values - Work Together, Amaze, and Grow. Mission Pet Health is veterinarian-led, people-focused, and on a mission to be the best place to work in veterinary medicine.
EEO Statement: Mission Pet Health is an equal opportunity employer. We embrace diversity and are committed to creating an inclusive environment for all employees.
Comcast brings together the best in media and technology. We drive innovation to create the world's best entertainment and online experiences. As a Fortune 50 leader, we set the pace in a variety of innovative and fascinating businesses and create career opportunities across a wide range of locations and disciplines. We are at the forefront of change and move at an amazing pace, thanks to our remarkable people, who bring cutting-edge products and services to life for millions of customers every day. If you share in our passion for teamwork, our vision to revolutionize industries and our goal to lead the future in media and technology, we want you to fast-forward your career at Comcast.
Job Summary
Responsible for effectively managing and monitoring all sales of integrated communication structure to enterprise customers such as multi-site regional businesses or national accounts in an effort to maximize sales revenues and meet corporate objectives on a consistent basis. Assures optimal sales team staffing and training readiness of sales professionals. Develops financial and operational objectives. Ensures operational plans are aligned with business objectives. Contributes to functional strategy development. Has a greater degree of impact on business results and typically manages one or more groups of professional employees.
Job Description
Core Responsibilities
- Maintains expertise on Company's products/services to effectively manage team Sales of Comcast Ethernet, Internet, Voice and TV services to enterprise customers ranging from 20-500 employees as well as medical and education institutions.
- Develops and monitors sale promotions and incentives to meet business goals and objectives. Ensures team and individual rep achievement of all sales, plus quality, goals and standards.
- Ensures competence and continuity of qualified Enterprise Account Executives through optimum selection, training and development and appraisal and motivation techniques.
- Possesses excellent knowledge of Company's products/services, pricing practices and selling skills to effectively oversee regional sales deployment of new products and services that target the enterprise segment.
- Manages records of individual, as well as group, sales and performance activities relative to business goals and objectives. Ensures accurate forecasts of annual, quarterly and monthly revenue and unit numbers through experience with processing and analyzing of data.
- Manages employee performance; counsels and advises to ensure compatibility, maximum effectiveness and continued growth on a constant basis. Addresses personnel issues/performance issues in accordance with company policy.
- Identifies and implements improvements in business processes yielding, increased sales performance and/or operational efficiency. through excellent time management, decision-making and human relations skills.
- Participates to help manage and monitor Business Services Enterprise Direct Sales channels within budgeted sales and expense targets.
- Develops and ensures implementation of best practices that contribute to improved performance and overall success.
- Consistent exercise of independent judgment and discretion in matters of significance.
- Regular, consistent and punctual attendance. Must be able to work nights and weekends, variable schedule(s) and overtime as necessary.
- Other duties and responsibilities as assigned.
Employees At All Levels Are Expected To:
- Understand our Operating Principles; make them the guidelines for how you do your job.
- Own the customer experience - think and act in ways that put our customers first, give them seamless digital options at every touchpoint, and make them promoters of our products and services.
- Know your stuff - be enthusiastic learners, users and advocates of our game-changing technology, products and services, especially our digital tools and experiences.
- Win as a team - make big things happen by working together and being open to new ideas.
- Be an active part of the Net Promoter System - a way of working that brings more employee and customer feedback into the company - by joining huddles, making call backs and helping us elevate opportunities to do better for our customers.
- Drive results and growth.
- Respect and promote inclusion & diversity.
- Do what's right for each other, our customers, investors and our communities.
Disclaimer:
- This information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications.
Skills
Business, Communication, Customer Experience (CX), Managing Sales Teams, Sales Negotiations, Strategic Objectives, Training and Development
Compensation
Primary Location Pay Range: $121,680.00 - $202,800.00 Targeted Commission: $70,000.00 Our sales compensation programs offer the potential for significant upside above targeted earnings for those who overachieve their sales targets.
Comcast intends to offer the selected candidate base pay dependent on job-related, non-discriminatory factors such as experience. Base pay is one part of the Total Rewards that Comcast provides to compensate and recognize employees for their work. Most sales positions are eligible for a Commission under the terms of an applicable plan, while most non-sales positions are eligible for a Bonus. Additionally, Comcast provides best-in-class Benefits to eligible employees.
The application window is 30 days from the date job is posted, unless the number of applicants requires it to close sooner or later.
Education
Bachelor's Degree While possessing the stated degree is preferred, Comcast also may consider applicants who hold some combination of coursework and experience, or who have extensive related professional experience.
Certifications (if applicable)
Relevant Work Experience
7-10 Years
Comcast is proud to be an equal opportunity workplace. We will consider all qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information, or any other basis protected by applicable law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Ensure compliance with SHEA regulations while performing all tasks.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Maintain logs, charts, and records, preparing reports and schedules as required.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Collaborate with other crafts to accomplish tasks and assist as needed.
Perform incidental rigging to facilitate work tasks.
Carry out work in other classifications when necessary to complete assignments.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
03, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Metal Surface Processor to join our Fabrication team in Auburn, Algona and Puyallup , Washington.
As a Metal Surface Processor, you’ll be part of a skilled team responsible for preparing metal components for aerospace applications through specialized surface treatment processes.
From cleaning and masking to anodizing and coating, your work will directly support the quality and performance of parts built for flight.
This role requires precision, technical ability, and a strong commitment to safety as you work with complex equipment and follow detailed procedures to ensure each component meets exact specifications.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities : Review the tie-in book or standard operating procedures to understand daily work assignments.
Provide comprehensive oral or written shift handoffs to ensure seamless workflow continuity.
Monitor the workload in the area and coordinate task flow to optimize shop utilization.
Proactively report issues or request additional support as necessary.
Identify, separate, and prepare parts according to work orders and chemical recipes (e.g., alkaline, emulsion, paint strip, sandblast, passivate) prior to racking.
Conduct thorough inspections of materials to verify proper cleaning, etching, rinsing, and other processes to ensure optimal adhesion and coating quality.
Perform visual checks post-process to confirm uniform coverage.
Apply approved masking materials and coatings based on technical drawings or tooling specifications in preparation for plating or painting operations.
Determine appropriate racking methods for complex part geometries, ensuring proper contact to prevent burning.
Inspect, remove, and report any damaged racks or clips.
Rack and unrack parts while verifying correct part numbers and chemical processes as per work orders.
Ensure no overloading or air pocket formation occurs during handling.
Operate material handling systems, including cranes, hoists, and carts, safely to transport parts and materials through processing areas.
Operate and monitor cleaning, Dow Coating, anodizing, dyeing, alodine, and rinsing tanks.
Determine correct dip times and maintain appropriate temperatures and solution levels.
Perform specific treatments such as sulfuric/chromic acid dips on 75 ST parts formed on Cerro Bend.
Apply alodine touch-ups or chromadize as required.
Assist in maintaining chemical strength by accurately measuring and adding solutions.
Estimate material surface area to prevent generator overloads.
Start generators, operate control panels, and utilize overhead cranes to load/unload tanks and transfer processed items between stations.
Strip anodizing from racks using caustic soda and nitric acid.
Clean tanks, crocks, and equipment to ensure safe and efficient operations.
Mark, oil, wrap, and route completed parts according to drawings or work orders.
Ensure correct parts are matched to work orders and transferred to Quality Assurance (QA) for inspection.
Handle and dispose of hazardous materials (e.g., alodine, acids, solvents) in accordance with safety procedures.
Complete all required on-the-job training and maintain necessary certifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications: 1 years of experience using basic math (e.g.
addition, subtraction, multiplication and division).
1 years of experience or training reading and interpreting drawings or blueprints.
1 years of experience working with hazardous materials.
Must be able to lift, push and pull up to 35 pounds Preferred Qualifications: Experience operating cranes.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
11, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
