Engineering Standards Document Jobs in Usa

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturers' recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs Corrective Maintenance (CM) procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other related sciences and documents results of activities performed to comply with all regulatory and standards requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for  emergency service or repair of  medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Performs other duties as assigned or requested by CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience.

One to two-years experience performing corrective and planned maintenance on medical equipment per policy.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device basic operational and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Location: Remote: Reside close to (Exton, PA)

Portfolio: Allen‑Sherman‑Hoff (ASH) Engineered Material‑Handling Systems (ANDRITZ)

About the Role

Allen‑Sherman‑Hoff (ASH), an ANDRITZ business, delivers engineered material‑handling systems that support power generation, biomass, and pulp & paper facilities operating in demanding, continuous‑run environments. Although ASH is technically an OEM, we operate far more like an A&E/EPC engineering firm: we deliver system‑level engineered solutions, integrating ASH proprietary equipment with structural, mechanical, electrical, and quality requirements to meet strict performance expectations.

We are seeking a Project Manager with power, energy, utilities, or EPC/A&E engineered‑systems project experience, someone who has led large, customer‑facing technical projects through engineering, fabrication, manufacturing, quality, and site support.

If your background is in internal manufacturing operations, IT/telecom deployments, or continuous improvement, this role is not a match. We need a PM who understands industrial plant environments, engineered equipment, and the rigor of technical project delivery.

What You Will Do

Lead Full Lifecycle Execution (Sales Handover → Final Turnover)

• Own the delivery of engineered ASH material‑handling systems across power, biomass, and pulp & paper facilities.
• Drive engineering, drafting, and calculation packages to meet scope, schedule, and contractual requirements.
• Coordinate and unblock fabrication/manufacturing, ensuring manufacturability and compliance.
• Manage supplier RFQs, subcontractor performance, expediting, and logistics.

Quality & Technical Documentation Leadership

• Manage ITPs, weld maps, NDE requirements, pressure tests, dimensional checks, and documentation packages essential to engineered‑equipment delivery.
• Validate compliance to ASME/AWS, customer specifications, and ASH quality standards.

Schedule, Cost, and Risk Management

• Maintain schedule baselines using Primavera P6.
• Oversee cost performance, margin drivers, change control, and contract compliance.
• Identify and mitigate technical and execution risks early.

Customer‑Facing Project Leadership

• Serve as the primary interface between the customer and ANDRITZ technical teams.
• Prepare and deliver technical and commercial progress reports.
• Support site activities (FAT, readiness reviews, installation coordination, commissioning support).

What You Bring

Required

• Experience in A&E/EPC, power generation, utilities, or industrial engineered‑systems delivery.
• (Examples: material handling, conveying systems, rotating equipment, mechanical process systems, boiler/balance‑of‑plant equipment).
• Proven ability to lead engineering‑heavy, customer‑facing projects with strict contractual and QA requirements.
• Hands‑on coordination with engineering, fabrication, manufacturing, quality, suppliers, and field service.
• Experience managing ITPs, weld maps, NDE, pressure tests, QA documentation, and technical turnover packages.
• Proficiency in Primavera P6 and Oracle or similar ERP.
• Bachelor’s degree in Engineering/Construction Management OR 5+ years of relevant engineered‑systems PM experience.

Preferred

• Power plant, utilities, biomass, or pulp & paper industry experience.
• Background in ash handling, bulk material handling, or mechanical systems integration.
• PMP or CAPM certification.
• Experience with retrofit, outage, upgrade, or brownfield scopes.

Work Model

• Remote with periodic travel to Exton, PA, fabrication shops, and customer facilities for inspections, FATs, readiness reviews, and site support.
• Travel expected but varies by project phase.

Why This Role Matters

Your work directly affects the reliability, uptime, and environmental performance of major industrial facilities. When you execute well, a power plant runs cleaner, a pulp mill avoids downtime, and a customer sees ASH as a trusted engineering partner. This is real engineering impact, not back‑office project tracking.

*All qualified applicants will receive consideration without regard to protected characteristics.

ABOUT US

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Location

Atlanta, GA

About the College of Engineering

Located in one of America's most vibrant cities, the College of Engineering (COE) is one of the largest producers of engineers in the country. Offering more than 50 different degree tracks at the Bachelors masters, and doctoral levels, COE incorporates eight engineering schools, consistently ranked among U.S. News & World Reports top 10. The College has built a strong reputation in the United States and abroad, and graduates leave with skills, knowledge, and global savvy for a world increasingly dependent on engineering.

Provide professional services in support of unit management in field as specified in the particular job posting. Focus will be in a professional field such as Communications, Marketing, Customer Service, Academic Administration, Event Management, Procurement, etc. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: unit management and staffThis position typically will advise and counsel: unit management and staffThis position will supervise: NA

Job Duty 1 -
Provide interim leadership and oversight for administrative staff, ensuring daily operations continue smoothly during the temporary assignment; Support onboarding and training of temporary staff or student workers as needed.

Job Duty 2 -
Coordinate and prioritize workflow across the administrative team to maintain timely, accurate service delivery; Serve as a point of escalation for operational questions, issues, or process bottlenecks.

Job Duty 3 -
Plan and execute meetings and events.

Job Duty 4 -
Oversee scheduling, meeting logistics, event coordination, and general office support functions; Monitor inboxes, requests, and service queues to maintain consistent response times and followthrough.

Job Duty 5 -
Manage purchasing, travel, reimbursements, and other routine business operations to ensure continuity; Assist with document preparation, communications, and other administrative tasks requiring timely attention.

Job Duty 6 -
Perform additional duties as assigned

Educational Requirements
Bachelor's Degree in related field or equivalent combination of education and experience

Required Experience
Up to two years of job related experience

• Experience supervising or leading administrative staff, including delegating tasks, monitoring workload, and supporting performance.
• Prior responsibility for coordinating office operations such as scheduling, event logistics, and service delivery.
• Prior experience with event management
• Experience serving as a point of escalation or problemsolver for operational issues.
• Ability to coach and support administrative team members during periods of transition or change.
• Proficiency with business systems such as Workday, Concur, or similar platforms
• Strong organizational skills with the ability to manage multiple priorities in a fastpaced administrative environment.
• Excellent written and verbal communication skills.

Salary: $44/hour

SKILLS
This job requires application of professional principles, processes and practices; application of regulations; utilization of basic and advanced computer applications including those specific to areas of responsibility; communication skills.

We will begin reviewing applications on March 20, 2026. The posting wil remain open until filled.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line atpolicymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-lineatpolicymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

• Standard Enhanced

The College of Engineering is seeking to fill a temporary Administrative Manager position. The role will provide direct supervision and daytoday leadership to an administrative support team, including workload distribution, providing guidance and performance feedback, and serving as an escalation point for operational issues. This position will serve as the primary point of contact for administrative operations during a period of transition, ensuring continuity of operations and coverage.

The Administrative Manager will oversee daily administrative operations, monitor service levels, and ensure consistent, highquality support for faculty, staff, students, and leadership. The role will also collaborate with internal stakeholders such as HR, finance, facilities, IT, and central offices to coordinate administrative needs, update leadership, and implement interim process improvements to address workflow gaps as needed.

This is a temporary position with an anticipated duration of up to eight months.

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

Provide engineering services in support of systems and equipment associated with research efforts within an academic or research unit or laboratory. Specific duties will be determined based on assignment and unit needs. This position will interact on a consistent basis with: unit management and staffThis position typically will advise and counsel: unit management and staffThis position will supervise: NA

Job Duty 1 -
Participate in the design, installation and testing of systems and components.

Job Duty 2 -
Develop engineering project schedules, plans, and specifications for systems and components.

Job Duty 3 -
Conduct analyses of system performance; prescribe corrective action where required.

Job Duty 4 -
Troubleshoot systems; may involve calibration and repair work.

Job Duty 5 -
Prepare drawings, schematic diagrams and other documentation associated with components and systems.

Job Duty 6 -
Provide input to and administer project engineering budgets.

Job Duty 7 -
Interact with vendors regarding procurement and delivery issues.

Job Duty 8 -
Participate in project reviews for conformance to quality standards and compliance with applicable codes and regulations.

Job Duty 9 -
Perform other duties as assigned

Research on grid-forming inverters

Stability analysis of grid-forming inverters

Educational Requirements
Bachelor's Degree in Engineering field, or equivalent combination of education and experience

Other Required Qualifications
Valid Driver's license This is a temporary position, limited to 1300 hours or 12 consecutive months, and subject to ACA and GT guidelines for temporary employment.

Required Experience
Up to two years of job related experience

Additional Preferred Qualifications
Professional Engineer (PE)

SKILLS
This job requires application of engineering principles, processes and practices; application of regulations, codes and safety practices; utilization of basic and advanced computer applications including those specific to areas of responsibility; communication skills.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia (USG) and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individuals race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About The Wallace H. Coulter Department of Biomedical Engineering

The Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University has a student body of 1,200 undergraduates, 260 graduate students, and 70 primary and 73 program faculty. In 2023 US News Graduate Program Rankings placed the department as the #1 ranked department in BME in the United States and our Undergraduate Program as the # 2 department in the United States. Since its beginning, the unique partnership between two of the nation's leading public and private entities has been an innovation engine for research and education. Combining the engineering and medical strengths at Georgia Tech and Emory, we are focused on solving some of the toughest problems facing our state, the nation, and the world.

Atlanta, GA

The Kwong lab in the Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology invites applications for a non tenure-track research faculty position in Laboratory for Synthetic Immunity.

The Laboratory for Synthetic Immunity (LSI) is an interdisciplinary research group in the Department of Biomedical Engineering at Georgia Tech & Emory School of Medicine. Founded in 2014 by Director Dr. Gabe Kwong, the mission of LSI is to pioneer the next wave of immunotherapies and diagnostics to intercept diseases at an early stage and develop treatments that drive deep responses to meaningfully improve patient outcomes.

We are currently seeking exceptional individuals to join our research group as a Research Scientist. The successful candidate will be a motivated and creative individual that will pioneer new categories of immune biosensors that leverage design principles from synthetic biology and cell engineering for early cancer detection. They will take a lead role in experimental design, execution of experiments, and interpretation of results to achieve the major objectives of the project.

The successful candidate will thrive on teamwork and collaboration. They will embrace a fast-paced environment and work closely with lab members to cultivate a positive and inclusive environment. This is a unique opportunity to join a well-funded research group with a track-record of academic excellence, breakthrough innovation and technology translation!

• Work closely with the director and lab members in experimental design, bench and animal studies,
• Play a lead role in regular internal project meetings and data reviews.
• Provide research expertise to aid lab trainees including graduate students, and undergraduates to achieve their research objectives and degree milestones.
• Work with the lab director and university officials in grant administration, project budgets, and scientific reporting.
• Play a lead role in drafting manuscripts and grant applications.
  

This vacancy is an open rank announcement. Final job offer will be dependent on candidate qualifications in alignment with research faculty ranks as outlined in section 3.2.1 of the Georgia Tech Faculty Handbook (faculty-handbook/3.2.1-research-faculty-hiring-and-promotion-guidelines

Research Scientist I

• Bachelor's degree in Biomedical Engineering or a related field
  

Research Scientist II

• A Master's degree in Biomedical Engineering or related field, and three (3) years of relevant full-time experience after completion of that degree, or
• A Master's degree in chemical engineering or related field, and five (5) years of relevant full-time experience after completion of a Bachelor's degree, or
• A Doctoral degree.

• Ph.D. in Biomedical Engineering, Bioengineering, Immunology, or related fields with deep expertise in cancer immunology and/or biosensors.
• Expertise in the design and testing of sense-and-respond biocircuits for cancer therapy or diagnostics.
• Proficiency in cell and molecular biology techniques including sterile technique, cell culture, chromatography, electrophoresis, and flow cytometry.
• Proficiency in animal studies including live animal imaging, animal handling and drug administration, necropsy and cell isolation.
• Skilled in molecular cloning, lentivirus production, T cell transduction, protein production and purification.
• Experience with T cell isolation, tumor inoculation; isolation, and dissociation of mouse tumor xenografts.
• Experience with qPCR, next-generation sequencing (NGS) library preparation, NGS data analysis is plus.
• Proficiency with statistical software like SPSS and/or GraphPad Prism.
• Excellent organizational, communication, time-management, and collaboration skills are required.
• Demonstrated desire to mentor graduate and/or undergraduate students.

• CV/Resume
• Cover letter

Dr. Gabe Kwong, Associate Professor, Wallace H. Coulter Distinguished Faculty Fellow . The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

Students are our top priority.
We strive for excellence.
We thrive on diversity.
We celebrate collaboration.
We champion innovation.
We safeguard freedom of inquiry and expression.
We nurture the wellbeing of our community.
We act ethically.
We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About the Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology and Emory University

The Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University has a student body of 1,200 undergraduates, 425 graduate students, and 80 primary and 73 program faculty. In 2025 US News Graduate Program Rankings placed the department as the #2 ranked department in BME in the United States and our Undergraduate Program as the #2 department in the United States. Since its beginning, the unique partnership between two of the nation's leading public and private entities has been an innovation engine for research and education. Combining the engineering and medical strengths at Georgia Tech and Emory, we are focused on solving some of the toughest problems facing our state, the nation, and the world.

Atlanta, GA

The Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology & Emory University invites applications from exceptional senior candidates working in the area of Neuroengineering, broadly defined. The successful candidate will be named the Georgia Research Alliance (GRA) Eminent Scholar in Neuroengineering, an endowed position specific to the Georgia Tech campus. GRA eminent scholars are expected to engage in or contribute to translational and/or economic development efforts in their field. Applicants should have earned a Ph.D. or equivalent degree. Appointment is expected at the rank of full professor with tenure.

The department seeks a visionary scholar-educator and proven leader in high impact and emerging areas of importance to human health and biomedicine. We are specifically interested in the areas of neuroengineering and neuroscience, particularly developing and using approaches in machine learning and AI, with neurotranslational potential. Along with excellent scholarship, candidates are expected to have demonstrated strong leadership in building and leading extramurally funded research programs, noteworthy dedication to innovative teaching and mentoring of diverse undergraduate and graduate student bodies, as well as national and international recognition. Of particular interest are candidates with an established and active record of accomplishment in leading large multi-institution and multi-disciplinary collaborative research efforts and a vision for developing the next generation of neuroengineering tools to facilitate emerging areas such as interactive neurotechnologies, brain computer interfaces, neuroAI, neural control of sensing and moving, the neural bases of decision making and cognitive function, and the neuroscience of neurological or psychiatric disorders.

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers

The successful candidate will interact with a vibrant and rapidly growing multi-disciplinary community across Georgia Tech, Emory, and greater Atlanta. Examples include: the Georgia Tech/Emory Neural Engineering Center; the newly-formed GT Institute for Neuroscience, Neurotechnology, and Society (INNS), crosscutting multiple Colleges; the McCamish Parkinson's Disease Innovation Program; researchers and educators spanning various basic science and engineering departments across Emory and Georgia Tech, as well as clinical departments such as the Emory Department of Rehabilitation, Division of Physical Therapy, Neurology, Neurosurgery, and the Emory Brain Health Center.

A PhD in engineering or related field is required by the start of the appointment.

• A PhD in engineering or related field is required by the start of the appointment.
• The ability to teach and mentor a student body
• The ability to promote a welcoming educational/work environment
• The ability to mentor and assist students interested in pursuing graduate education
• The ability to engage students in experiential learning activities and pedagogy that support student success
• The ability to engage in high-impact practices that support deep learning for student success

Applicants should submit 1) a letter of application, 2) curriculum vitae, 3) a statement of research interests, 4) a description of teaching interests, 5) A statement that in two pages or less outlines how the applicant's professional and academic experiences have prepared them to support and apply Georgia Tech's mission and values , and 6) the names and contact information for at least three references. Application materials should be submitted as .PDF files

Applications will be considered beginning January 15, 2026, but the search will continue until the positions are filled.

Requests for information may be directed to .

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening