Engineering Jobs in Silvis Illinois

General Summary

As the Director of Maintenance, you will be the on‑site authority guiding all maintenance and service operations to ensure aircraft are safe, airworthy, and ready for flight. You'll oversee maintenance activities in full alignment with FAA regulations, the Quality Control Manual (QCM), the Repair Station Manual (RSM), and all approved maintenance data. Your leadership ensures every aircraft is maintained and released to service in full compliance with 14 CFR Part 145.

In this pivotal role, you will provide the strategic direction, hands‑on leadership, and regulatory accountability that keeps our maintenance organization operating at peak performance. You'll lead and mentor maintenance teams, oversee maintenance planning, and drive the daily execution of service operations at your assigned location-all while fostering a culture of safety, quality, and operational excellence.

Primary Responsbilities

Regulatory & Airworthiness Oversight

Ensure compliance with 14 CFR Part 145, Repair Station Manual, Quality Manual, and applicable FAA guidance.

Ensure maintenance is performed using approved technical data and proper procedures.

Ensure proper execution of return-to-service documentation.

Support FAA, customer, and third-party audits and ensure corrective actions are implemented and sustained.

Coordinate with Quality and Engineering on regulatory interpretation and compliance matters.

Maintenance & Service Execution

Direct all maintenance, inspection, repair, and modification activities at the site.

Ensure effective planning, sequencing, and control of maintenance work.

Ensure personnel, tooling, facilities, and materials are adequate for assigned work.

Conduct daily production oversight to ensure safe, compliant, and timely execution.

Safety Management

Promote and enforce a safety-first culture in accordance with the company Safety Management System (SMS).

Ensure hazards, incidents, and near misses are reported and addressed.

Support investigations and corrective actions related to maintenance events or deviations.

Personnel & Training

Ensure maintenance personnel are properly trained, qualified, and authorized to perform assigned tasks.

Ensure compliance with training, certification, and recurrent qualification requirements.

Provide leadership, direction, and accountability to maintenance supervisors and staff.

Operational Performance

Monitor and manage performance related to schedule adherence, labor utilization, and rework.

Identify and address operational constraints impacting compliance, safety, or delivery.

Support coordination with Planning, Parts, Quality, and Customer Experience functions.

Top Candidates Will Possess

Bachelor's degree in Aviation Management, Business or related field preferred

Minimum 10 years aircraft maintenance experience

Minimum 5 years in a maintenance leadership role within a Part 145 environment

FAA Airframe & Powerplant (A&P) certificate required

Deep understanding of business aviation airframes, powerplants, and diagnostics

Strong working knowledge of FAA Part 145 (and Part 91/135 interfaces), safety management systems, and quality assurance principles

Ability to troubleshoot complex maintenance issues and guide teams through efficient, compliant resolutions

Proficient in planning, workflow optimization, scheduling, and resource allocation

Strong communicator capable of translating technical issues into clear, customer‑friendly information

Builds trust with aircraft owners, operators, and OEMs through transparency and exceptional service delivery

Drives long‑range planning, departmental budgeting, capacity forecasting, and capability development

Identifies new service opportunities, efficiencies, and technology integrations to keep the MRO competitive

Inspires, coaches, and builds high‑performing maintenance teams

Demonstrates calm, confident decision‑making in high‑pressure operational environments

Instructions

Relocations assitance is there for this role

3rd shift

Job Description

Job Title: Quality Engineer

Location: Onsite

Shift: 3rd Shift

Work Hours: 40 hours/week + up to 5 hours overtime per week

Experience Required: 2+ Years

Important Note:

Visa sponsorship is not available now or in the near future for this position.

Job Overview

We are seeking a Quality Engineer to support quality activities on the shop floor, investigate product and process quality issues, and drive corrective actions. This role will work closely with inspectors, internal teams, and customers to ensure quality standards are maintained and improved.

Key Responsibilities

• Use quality tools and practices to establish approval criteria and identify quality concerns.
• Investigate product and process quality issues, collect and analyze data, and implement corrective actions.
• Provide work direction to inspectors regarding containment, quality procedures, and monitoring of critical processes.
• Facilitate quality-related discussions with internal and external customers to drive corrective actions.
• Generate monthly quality reports to track metrics and participate in management reviews.
• Support and identify Continuous Improvement (CI) projects.
• Spend 50–75% of time on the shop floor supporting manufacturing activities.

Required Qualifications

• 2+ years of experience in Quality Engineering or related field.
• Experience working in manufacturing/shop floor environments.
• Strong team collaboration skills.
• Proficiency in Microsoft Office Suite.
• Ability to analyze data and resolve quality-related issues.

Preferred Qualifications

• Mechanical Engineering or Industrial Engineering degree preferred (not required).
• Equivalent education or relevant work experience will also be considered.

Additional Requirements

• Metatarsal safety shoes are required on the shop floor.

One of our direct Manufacturing clients is hiring for a Supervisor, below are the details:

Position Title: Unit Supervisor

Duration: 12 months

Location: Milan, IL

Onsite Role Only

2nd shift - 2:30pm to 11pm

Potential OT including Saturdays

You will be responsible for leading a production workforce to meet the distribution priorities based on the production schedule. In addition, you will:

• Be responsible for leading a wage workforce to accomplish the safety, quality, delivery, and efficiency goals through Continuous Improvement (CI) plans and activities.

• Ensure that assigned personnel have appropriate training, work instruction and tools to successfully do their job.

• Lead safety through regular safety communications, driving engagement in the CI Safety and Ergonomic Risk Assessment process, prompt near miss reporting with a focus on quick, thorough safety corrective actions.

• Monitor Production Plans, troubleshoot workmanship problems, and generally supervise production activities to ensure that manufactured products meet or exceed all established quality requirements.

• Lead employee engagement activities, while establishing a positive employee environment through communications, feedback and overall guidance.

• Monitor individual/group performance and take corrective action including discipline, as needed and respond to complaints to ensure the Company and employees adhere to policies, practices, procedures, and work rules.

Requirements

• Excellent communicator, who thrives on solving problems and working in a team environment.

• Experience with, or supporting, shop floor manufacturing and/or warehouse operation.

• Demonstrated team leadership skills.

• Experience communicating across functions (such as: supply management, engineering, operations and human resources).

• IF NEEDED – Ability and flexibility to work across shifts based on production needs.

Desired Skills/Experiences

• Experience with continuous improvement pay plans (CIPP).

• Experience with wage/union employee policies, practices, procedures and work rules.

• Experience in leadership or supervision of a union workforce.

• Working knowledge of the CI continual improvement process and 5S.

Education

• Bachelor’s degree or equivalent experience.

EEO:

“Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.”

General Summary

As the Director of Maintenance, you will be the on‑site authority guiding all maintenance and service operations to ensure aircraft are safe, airworthy, and ready for flight. You'll oversee maintenance activities in full alignment with FAA regulations, the Quality Control Manual (QCM), the Repair Station Manual (RSM), and all approved maintenance data. Your leadership ensures every aircraft is maintained and released to service in full compliance with 14 CFR Part 145.

In this pivotal role, you will provide the strategic direction, hands‑on leadership, and regulatory accountability that keeps our maintenance organization operating at peak performance. You'll lead and mentor maintenance teams, oversee maintenance planning, and drive the daily execution of service operations at your assigned location-all while fostering a culture of safety, quality, and operational excellence.

Primary Responsbilities

Regulatory & Airworthiness Oversight

• Ensure compliance with 14 CFR Part 145, Repair Station Manual, Quality Manual, and applicable FAA guidance.
• Ensure maintenance is performed using approved technical data and proper procedures.
• Ensure proper execution of return-to-service documentation.
• Support FAA, customer, and third-party audits and ensure corrective actions are implemented and sustained.
• Coordinate with Quality and Engineering on regulatory interpretation and compliance matters.

Maintenance & Service Execution

• Direct all maintenance, inspection, repair, and modification activities at the site.
• Ensure effective planning, sequencing, and control of maintenance work.
• Ensure personnel, tooling, facilities, and materials are adequate for assigned work.
• Conduct daily production oversight to ensure safe, compliant, and timely execution.

Safety Management

• Promote and enforce a safety-first culture in accordance with the company Safety Management System (SMS).
• Ensure hazards, incidents, and near misses are reported and addressed.
• Support investigations and corrective actions related to maintenance events or deviations.

Personnel & Training

• Ensure maintenance personnel are properly trained, qualified, and authorized to perform assigned tasks.
• Ensure compliance with training, certification, and recurrent qualification requirements.
• Provide leadership, direction, and accountability to maintenance supervisors and staff.

Operational Performance

• Monitor and manage performance related to schedule adherence, labor utilization, and rework.
• Identify and address operational constraints impacting compliance, safety, or delivery.
• Support coordination with Planning, Parts, Quality, and Customer Experience functions.

Top Candidates Will Possess

• Bachelor's degree in Aviation Management, Business or related field preferred
• Minimum 10 years aircraft maintenance experience
• Minimum 5 years in a maintenance leadership role within a Part 145 environment
• FAA Airframe & Powerplant (A&P) certificate required
• Deep understanding of business aviation airframes, powerplants, and diagnostics
• Strong working knowledge of FAA Part 145 (and Part 91/135 interfaces), safety management systems, and quality assurance principles
• Ability to troubleshoot complex maintenance issues and guide teams through efficient, compliant resolutions
• Proficient in planning, workflow optimization, scheduling, and resource allocation
• Strong communicator capable of translating technical issues into clear, customer‑friendly information
• Builds trust with aircraft owners, operators, and OEMs through transparency and exceptional service delivery
• Drives long‑range planning, departmental budgeting, capacity forecasting, and capability development
• Identifies new service opportunities, efficiencies, and technology integrations to keep the MRO competitive
• Inspires, coaches, and builds high‑performing maintenance teams
• Demonstrates calm, confident decision‑making in high‑pressure operational environments

• Provide exceptional service to our customers by performing maintenance, diagnosis, and repairs on allied type construction and Aerial work platform equipment.
• Responsible for picking-up and delivering equipment when necessary.
• Complete associated paperwork.
• Establish and maintain service-oriented working relationship with customers.
• Provide excellent customer service to all customers.
• May perform other related duties as requested and/or assigned.

• Two or more years of related work experience.
• Must have a good understanding of gas and diesel engines, hydraulic and electrical systems.
• Must be a self-starter, organized, with strong customer service orientation.
• Automotive and Industrial Maintenance Technicians are encouraged to apply.
• Must be able to lift 75 lbs.
• Computer literacy required. Must be familiar with programs such as Microsoft Office Suite.
• Ability to follow all safety rules and wear proper safety equipment.
• Excellent planning & organizational skills are needed.
• Must take initiative, be team oriented and willing to adapt to change.
• Ability to respond to callouts, work overtime and weekends when needed.
• Excellent communication skills (written, e-mail, and verbal) are required.
• High School Diploma or equivalent is required.
• Must possess a valid driver's license and clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate

This position will work in the field/shop environment and at Customer jobsites. May on a continuous basis walk, bend and lift up to 75 lbs. Will be required to wear appropriate safety equipment (IE- Safety glasses or side shields, hearing protection, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description

Arconic is currently in search of an entry level Electrical Engineer to join our Plate Department based in our Davenport, IA location.

At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization.

Job Summary:

This entry level Electrical Engineer is a great opportunity to apply your technical skills while coordinating numerous capital projects across the Plate department. This role is driven by self-directed work and collaborative efforts with a team of Electrical Engineers, Technical staff, maintenance, and production across the department.

The Electrical Engineer reports to the Lead Electrical Engineer in the department and will work Monday through Friday during daytime hours. You will support off-shifts as needed for your respective projects.

In this role, you will:

• Coordinate all phases of assigned area electrical engineering projects from concept, scope development, written specifications, bid solicitations, design, manufacturing, equipment commissioning, and project closure.
• Lead and participate in problem solving efforts with multi-discipline technical staff, maintenance and production.
• Use PI Vision and Data Link to analyze process issues and provide input to solve process problems.
• Create and develop electrical control solutions that will support process improvements and improve equipment reliability.
• Assist production and maintenance with equipment and process issues.
• PLC/HMI and controls redesign and upgrades of existing processes.
• Install and troubleshoot camera systems on industrial equipment.
• Incorporate SMART Manufacturing principles and tools into automated inspection systems to improve processes, data collection/analysis, and drive quick results in recovery improvements.

Qualifications

You have:

• Bachelor's Degree in Electrical Engineering Technology or Electrical Engineering from an accredited institution
• 1-3 years of Electrical Engineering experience (including Internship)
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire Visa sponsorship is not available for this position
• This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.
• 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.

Exceptional Candidates possess:

• Manufacturing experience in a highly industrial environment
• 1-3 years' experience with PLC's, HMI's, AC/DC drives & motors, measuring devices and ethernet cameras
• Proficiency with Rockwell programming software (i.e.: RS Logix and FactoryView)
• Proficiency in Microsoft Office Suite and Project programs
• Good oral and written communication skills in a variety of settings (shop floor, peers, plant leadership, etc)
• Demonstrated success as a project implementation manager, including budget and schedule development.

About Us

Arconic Corporation is a leading provider of aluminum sheet, plate and extrusions, as well as innovative architectural products, that advance the automotive, aerospace, commercial transportation, industrial and building and construction markets. Building on more than a century of innovation, Arconic helps to transform the way we fly, drive, and build.

We live our core values and commit to delivering sustainable value to our customers, our employees, our communities and our stakeholders.

At Arconic, we:

Act With Integrity.

We lead with respect, honesty, transparency and accountability.

Safeguard our Future.

We protect and improve the health and safety of our employees, communities and environment.

Grow Stronger Together.

We cultivate an inclusive and diverse culture that advocates for equity.

Earn Customer Loyalty.

We build customer partnerships through best-in-class products and service.

Drive Operational Excellence.

We pursue continuous improvement through innovation, agility, people development and collaboration.

Create Value.

We achieve success by generating and growing value for our stakeholders.

This position is subject to Export Control Law

This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.

• 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.

Equal Employment Opportunity Statement

Arconic is an equal opportunity employer. We take action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics.

About The Team

ABOUT Davenport Works

Davenport Works is the country's largest aluminum rolling mill, it was opened in 1948 and currently employs more than 2,000 people and ships product worldwide. It is in Riverdale in the Quad Cities (Davenport and Bettendorf in southeastern Iowa, and Rock Island and Moline in northwestern Illinois). The Quad Cities is 3 hours south-west of Chicago, 4 hours north of St. Louis, and less than 3 hours from Des Moines. The Quad Cities is home to St. Ambrose University among 8 educational institutes. Major outdoor summer music festivals include the Bix Beiderbecke Memorial Jazz Festival, Mississippi Valley Blues Festival, and River Roots Live.

Contract to Direct Hire Role!

*Looking for Design/CAD experience and we will teach the sprinkler side.

*Mechanical Designer or Mechanical Engineer for this role

Job Description

• Design fire suppression systems including wet, dry, pre-action, and foam fire sprinkler systems
• Perform detailed shop drawings (field installation drawings and hydraulic calculations), field engineering functions (on the jobsite support and review), and operation planning (field installation support)
• Compile and prepare plan submittals (shop drawings) and material submittals for review by architects, engineers, clients, and authorities having jurisdiction Coordinate fire sprinkler design with the building structure and other MEP subcontractors.
• Prepare project material stock lists to be used for material procurement assist with Field engineering troubleshooting and support for the installation operations on the jobsite Prepare \"as-built\" drawings for in-house archive and client files.
• General understanding of job costs related to engineering, material and fabrication, and labor.
• Work productively and meet deadlines timely.
• Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment.
• Perform work safely and effectively.
• Understand and follow oral and written instructions, including warning signs, equipment use, and other policies.
• Work during normal operating hours to organize and complete work within given deadlines.
• Willing to teach.

Skills Required

• Experienced with MS Excel, Word, and AutoCAD preferred.
• High level of self-discipline, motivation, and ability to operate in a team environment with strong interpersonal, written and verbal communication skills.
• Team player, but able to work independently; Highly motivated, with a demonstrated passion for excellence and taking initiative
• Strong organizational skills, time management, and attention to detail
• Regular, reliable attendance
• Experience with AutoSPRlNK, HydroCAD, or SprinkCAD A PLUS

We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

JOB-10042598

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.