Engineering Jobs in Pacific County, WA
34 positions found — Page 3
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington .
As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials.
Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained.
You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes.
Your attention to detail and commitment to excellence will directly contribute to our operational success.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities: Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.
Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.
Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.
Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.
Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.
Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.
Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.
Load and secure dies into the press, checking for defects and torquing as necessary.
Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.
Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.
Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.
Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.
Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.
Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.
Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 1 Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators? 1 Years of experience reading blueprints and structural drawings.
1 Years of experience operating a hydraulic press.
Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications: Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
Ability to work in noisy environments while completing tasks.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts.
Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.
As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes.
Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards.
To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations.
You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements.
Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.
Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Inspect mockups of engineering design changes to ensure adherence to specifications.
Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.
Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.
Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.
Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.
Document discrepancies and report them to the appropriate personnel for resolution.
Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work on-site at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 3 years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
3 years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
1 years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.
Experience as a Quality Inspector.
Experience working with Microsoft Office (Excel, Word, PowerPoint).
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to complete Fall Protection Training.
Preferred Qualifications: Experience inspecting welds / welds certification Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Surface Warfare Officer
More Information
Responsibilities
Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces:
Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers.
Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support.
Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations.
Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships.
Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines.
You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers.
Work Environment
As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world.
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore.
Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification.
After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer.
There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI.
All candidates must also be U.S. Citizens.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as a Surface Warfare Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as a Surface Warfare Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
The Company
Davis Wire (Kent, WA) is part of the Heico US Wire Group, comprising three independent companies with four manufacturing facilities that produce steel wire and cable products for diverse industries. This independent model encourages entrepreneurship, growth, and professional development at all levels. The US Wire Group operates within the Metals Processing Group and is wholly owned by The Heico Companies, LLC.
Our philosophy of developing close customer contact to provide prompt, responsive service and to meet our customers’ changing needs allows us to be leaders within our respective industries. Products are marketed domestically through a direct sales force, manufacturer's representatives, and an established network of independent distributors. Our company is diverse and has a solid management base, product/market niches and efficient manufacturing capabilities.
The Position
The EHS Manager is a champion of safety culture, responsible for developing and implementing programs that ensure compliance with the Heico EHS management system, regulatory requirements, and the site’s strategic goals. Reporting to the Facility VP/GM, this visible role requires a strong presence on the production floor and close collaboration with employees, supervisors, managers, and corporate/regional EHS teams. The role may also be overseeing the work of staff, hourly employees, or external consultants.
Job Description
Primary Responsibilities
- Lead the development and implementation of safety policies, procedures, and training programs to ensure compliance with local, state, and federal regulations.
- Promote a proactive safety culture by training managers and employees in safe work practices, fire prevention, chemical/material handling, and emergency response.
- Serves as a visible leader on the production floor, conducting inspections, identifying risks, and ensuring timely corrective or preventative actions.
- Plans and implements training programs for managers and employees on safe work practices, fire prevention, and proper handling of materials.
- Guides management and supervisors in accident investigations and partnering with HR on workers’ compensation, hearings, and insurance cases.
- Manages environmental compliance, including waste stream management (RCRA/DOT), manifests, labeling, and wastewater treatment operations.
- Ensures that all waste is stored in compliance with RCRA and other relevant regulations.
- Conducts environmental and safety inspections and determines corrective or preventative measures where indicated and follows up to ensure measures have been implemented.
- Completes and submits all environmental reports required by various agencies.
- Plans and implements safety policies and procedures in compliance with local, state, and federal rules and regulations.
- Prepares studies and analyses of industrial accident causes and hazards to health for use by company personnel and outside agencies.
- Compiles and submits accident reports required by company and regulatory agencies.
- Oversees the administration of workers' compensation program, including working with the insurance carrier to eliminate employee industrial accidents, working in tandem with the Human Resources department.
- Represents the organization in community or industry safety groups and programs.
- Maintains safety files and records.
Job Requirements
- Minimum 10 years of industrial EHS experience including at least 5 years’ management level EHS experience preferred.
- Bachelor’s degree from an accredited institution in engineering, safety, environmental or related science
- Strong working knowledge of applicable EHS laws and regulations, state, local, and federal
- Excellent time management, project coordination and organizational skills
- Strong analytical skills and ability to leverage data to make/gather support for business decisions
- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to think strategically and solve practical problems and deal with a variety of variables in situations where only limited standardization exists.
- Ability to carry out supervisory responsibilities in accordance with the organization's policies and applicable laws.
- Strong team building and team-participation skills
- Ability to both teach and learn
- Strong oral and written communication skills with an ability to communicate with all levels of the organization and work in a team environment
- Must be able to use Excel, Word, and Outlook
- If needed must be able to obtain “Operator in Training Certification” from State of Washington Department of Ecology
- Must be able to understand the process flow and reactions occurring within each component of the wastewater treatment and acid recovery system
- Must be able to understand and apply basic principles of chemistry (i.e. pH, acids/bases)
- Certification in an EHS related discipline and/or further education is a plus.
- Authorized to work for any employer in the United States of America
- Must be able to pass preemployment background, drug/alcohol, and physical screenings
Physical Requirements
- Must be able to use a variety of hand tools such as wrenches, screwdrivers, hammers, etc.
- Must be able to work in a dusty environment around metals
- Sight – hand and eye coordination, depth perception needed to operate, adjust, and quantify chemicals and equipment, vision sufficient to inspect work areas and building for issues and operate computers
- Hearing – must be able to hear others and warning sounds of forklift and other heavy machinery
- Speech – must be able to communicate effectively with others while working
- Smell – must be able to smell various chemicals and gasses
- Must be able to sit, stand, and walk for long periods – frequent to constant
- Must be able to squat, stoop, twist, climb, crawl, reach, grasp, and fine manipulation, and bend occasional to frequent
- Must be able to be able to lift/carry 50+ lbs - occasional
Key Leadership Competencies
- Leadership Capability - Has the leadership acumen and credibility to work across the entire organization and develop talent. Should be hands-on, but able to delegate appropriately with the ability to motivate, inspire and commit an organization to a course of action and achieve results.
- Strategic Thinking - Strong strategic capabilities and overall business acumen. Financially savvy and understands the economic levers behind improving EBITDA and other key metrics. Fact-based, data-driven and analytical. Creative mindset with the ability to identify and mobilize around new opportunities very quickly.
- Innovation Focus - Confident ability to drive change and express and advocate for new ideas and ways of doing things. Willingness to take appropriate business risks, recognizing that to succeed overall, one will occasionally fail.
- Collaborative Style – Engages stakeholders in problem solving and decision making. Is adept at bringing people together to tackle issues rather than dictate solutions. Has a collegial, inclusive working style and is professional and courteous. Builds strong relationships both internally and externally. Is both confident and humble.
- Communication Skills - Excellent verbal and written communication skills with the ability to effectively deliver and reinforce consistent messages at all levels. Excellent listening skills.
NOTE: We are willing to provide relocation assistance for the right candidate
About Lightcurve
Headquartered in Tacoma, WA, Lightcurve is a local leader in delivering high-speed internet and digital connectivity solutions to communities throughout Washington State. With a commitment to provide innovative and reliable broadband services delivered with a focus on excellent customer service, Lightcurve is dedicated to connecting people, supporting community growth, and building networks that fuel our local economies.
In 2023 Palisade Infrastructure ("Palisade") closed on a transaction to acquire Rainier Connect, forming Lightcurve. In 2024 Lightcurve closed on a transaction acquiring the Washington state operations of Consolidated Communications. Since then, Lightcurve has announced plans to deploy fiber optic broadband in several communities. These investments will allow Lightcurve to rapidly invest in modern fiber-optic broadband networks in both existing markets as well as in several expansion markets, bringing the latest in high-speed reliable broadband solutions to its communities.
Company Culture and Values - At Lightcurve, we are driven by our core values.
Integrity Upholding the highest standards of integrity at all times.
Delighting Our Customers: Delivering exceptional experiences that exceed expectations.
Collaboration: Working together to create successful outcomes for customers and employees alike.
Position Summary
Facilities Technicians work both inside and outside to build, install, test, and repair telecommunication and broadband services for residential and commercial customers. Candidates need to be comfortable with the primary responsibilities and qualifications listed below. If you feel you are a close fit, but have weaknesses, please list them.
Key Responsibilities
Primary
- Installation of Fiber and Coax Internet, Voice, and Streaming TV services.
- Installation of aerial or underground fiber, copper, and coax drops.
- Place aerial or underground coax and fiber cable.
- Educate customers on use of services.
- Analyze quality and determine acceptability of services delivered upon completion of installation.
- On call during scheduled time periods, and respond to calls as needed.
- Operate and maintain assigned vehicle in accordance with company guidelines.
- Ensure vehicle is stocked with necessary equipment.
- Coordinate with other departments as necessary to ensure customer satisfaction and problem resolution.
- Maintain a sense of urgency and consistently meet deadlines.
- Accurately completes required paperwork and documentation associated with each job assignment.
- Maintain up-to-date documentation on network specifics, configurations, and changes.
- Work closely with other technical teams (e.g., technical support, dispatch, central office, engineering, customer service/sales, and management) to align network infrastructure with business needs. Stay updated on industry trends, technologies, and best practices in networking.
Secondary
- Performing fiber splicing.
- Construction work such as placing cable, installing conduit, and working in open excavations.
- Work with heavy duty power equipment as well as small tools in the installation, repair and maintenance of outside plant.
Measuring Success
- Contributing to and developing a performance and results oriented culture.
- Behaviors that are aligned with and strengthen company values.
Qualifications
Education
- High-school diploma or equivalent required.
Certifications
- Must possess a valid state driver's license and non-negligent driving record.
- NCTI/Jones, TIA, WA state low voltage license, or relevant industry certifications a plus.
- Current first aid, CPR, or Flagger training a plus.
Requirements
- Ability to frequently move/lift 75lbs.
- Willingness to work outside in all weather conditions.
- Willingness to work in attics, basements, crawl spaces, manholes and other similar places.
- Ability to climb poles, ladders, and to be comfortable working aloft with hand tools.
- Must be able to work overtime and holidays as service conditions require.
- Ability to pass background and pre-employment drug screening.
Experience
- Technical training in fiber installation, copper installation, or similar field.
- At least 1 year experience as an Outside Plant Technician or Installer.
- Hands-on experience with modems, routers, and other network devices.
Skills
- Comfortable using computers including hand-held models to update work status and check new assignments.
- Demonstrable understanding of technology trends in the digital infrastructure sector and applying such technology to address customer needs and pain points.
- A scrappy, nimble, innovative, and hands-on contributor who is not afraid to roll up their sleeves to accomplish goals and has passion for competing and winning against larger players in the market.
- Demonstrated critical thinking skills, excellent and proactive communication skills, an ability to identify, prioritize, and articulate highest impact initiatives, with sound business judgement and a bias for action.
Personal Attributes
- Customer-focused and results-oriented mindset.
- Adaptability and willingness to learn and implement new skills and strategies.
- Strong organizational and time management skills.
- Comfortable supporting customers on site, and in person.
Schedule
- 8 hour shift.
- Day shift.
- Evenings, Weekends, and Holidays On Call when needed.
Compensation
- Pay: $25-$35 per hour DOE
- Paid Holidays
- Paid PTO
- Medical, Dental, & Vision, and Life Insurance, 401K w/ matching
- Employee Assistance Program
Lightcurve is an Equal Opportunity Employer committed to diversity and inclusion in the workplace.
Min years of experience: 4+ Degree Requirements: BS in Engineering or Engineering Technology / or relevant engineering experience Detailed Job Description: Experience with AS9100 & NADCAP Compiling and reviewing source data packages for part delivery Compiling and preparing information for non-conformance submittal to customers Exporting defect data and compiling into digestible formats Drafting AS9100 first articles Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
- 2:30pm, Monday
- Friday Interview Process: Phone screen by manager, then onsite interview US Citizenship is required (DOE contractual requirement).
No US Persons or Nationals permitted.
Other important notes: This is not an assembly line type of position.
This is custom product assembly from beginning to shipment.
1-3 years experience in a job that demonstrates mechanical aptitude required.
Automotive Technicians do well in this role.
The manager is not looking for some who has worked on a typical assembly line.
***'s goal is to convert the contingent worker at 6 months time.
There is no guarantee of this as it is dependent on the work performance and culture fit of the worker.
Company Information: Hot Cell Services, located in Kent, WA is an affiliate of
*** Incorporated, one of the world's oldest and largest glass companies.
They are the leader in the radiation shielding protection industry and have been manufacturing radiation shielding windows for over 45 years.
Position Summary: While a part of a multibillion-dollar corporation, this site is a small (11 employees) operation.
Given their very efficient size, they are seeking a motivated self-starter type individual with the desire to learn glass-handling, product assembly, packaging, shipping and receiving, all of which will keep the right candidate challenged at all times.
Candidates with Technology AAS degrees will also participate in Manufacturing Engineering and product logistics planning activities.
Essential Duties and Responsibilities:
- Material handling: loading and unloading glass sheets, glass blocks, steel plate, rubber rolls, bags of grit, lead wool, lead sheets, gypsum sheets, oil drums and pallets by utilizing pallet jacks, overhead cranes and manual lifting.
(Contingents will not operate a forklift, but if the worker is hired fulltime, they will be trained to operate forklift)
- Assistance in product assembly: installation of glass into steel frames, manual lead wool compacting, component assembly using bolts and gaskets, filling and draining mineral oil from windows using an electrical pump.
- Assistance in fabrication: grinding, cutting, drilling and tapping of steel
- Product finishing: sanding edges of cut glass, deburring steel components and rubber gaskets by utilizing manual and power sanding methods, manual glass cleaning.
- Shipping and receiving: receiving and opening of incoming shipments, verifying documentation, packaging items and preparing crates for shipment.
Qualifications: • HS diploma is required / Technology AAS degree is desired • High degree of mechanical aptitude required, 1-3 years demonstrated experience • Ability to use manual and power hand tools required (Wrenches, hydraulic jacks, air tools, etc) • Ability to follow written practices and procedures, read drawings and document their tasks (must follow good record keeping practices).
• Valid Driver's License is required • Must have the ability to lift 50+ pounds • Travel is not required as a contractor (but will be required if converted to a direct employee, 25-30% of time) Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
#EDS014
- $32/hr.
on w2 Travel Requirements: Onsite (5 days a week) Job Description: Position Summary: While a part of a multibillion-dollar corporation, this site is a small (11 employees) operation.
Given their very efficient size, they are seeking a motivated self-starter type individual with the desire to learn glass-handling, product assembly, packaging, shipping, and receiving, all of which will keep the right candidate challenged at all times.
Candidates with Technology AAS degrees will also participate in Manufacturing Engineering and product logistics planning activities.
Essential Duties and Responsibilities: Material handling: loading and unloading glass sheets, glass blocks, steel plate, rubber rolls, bags of grit, lead wool, lead sheets, gypsum sheets, oil drums, and pallets by utilizing pallet jacks, overhead cranes, and manual lifting.
(Contingents will not operate a forklift, but if the worker is hired fulltime, they will be trained to operate forklift) Assistance in product assembly: installation of glass into steel frames, manual lead wool compacting, component assembly using bolts and gaskets, filling and draining mineral oil from windows using an electrical pump.
Assistance in fabrication: grinding, cutting, drilling, and tapping of steel Product finishing: sanding edges of cut glass, deburring steel components, and rubber gaskets by utilizing manual and power sanding methods, manual glass cleaning.
Shipping and receiving: receiving and opening of incoming shipments, verifying documentation, packaging items, and preparing crates for shipment.
Qualifications: HS diploma is required / Technology AAS degree is desired High degree of mechanical aptitude required, 1-3 years demonstrated experience Ability to use manual and power hand tools required (Wrenches, hydraulic jacks, air tools, etc.) Ability to follow written practices and procedures, read drawings and document their tasks (must follow good record keeping practices).
Valid Driver’s License is required Must have the ability to lift 50+ pounds Travel is not required as a contractor (but will be required if converted to a direct employee, 25-30% of time)
About the role:
Team 360 Staffing is seeking reliable and motivated Plant Maintenance Technician to join our client's team. The ideal candidate will ensure plant production equipment continues to operate safely and efficiently; you would be utilizing skills to reduce unwanted downtime.
We are seeking highly organized and detail-oriented candidates with strong multitasking and time-management proficiency. Candidates must be able to analyze and troubleshoot electrical, automation, mechanical, and operational problems on equipment.
Company:
Team 360 Staffing is a trusted staffing and recruitment agency that connects job seekers with the right opportunities across various industries. You will be working for a specialty dairy brand that focuses on ultra-creamy, high-quality yogurt.
Job Type: Full-time
Pay: $33.00 - $35.00 per hour
Benefits:
- 401 (K)
- Paid time off
Production Floor Responsibilities (80%):
- Troubleshoot equipment failure and mechanical/electrical issues on a day-to-day basis.
- Adjust, repair, or replace the correct part using power or hand tools as appropriate.
- Performs minor electrical maintenance if needed.
- Monitor production for any physical, mechanical, electrical improvements/changes/repairs.
- Respond to maintenance/facility emergency situations in accordance with departmental protocol.
- Follow all OSHA, HAZMAT, USDA, FDA, and EPA rules and regulations.
- Complete PMs based on direction given from Maintenance Supervisor/Engineering Manager
- Work and assist with implementing and following preventive maintenance (CMMS system) schedule.
- Organize and maintain work area to follow 5s.
- Performing other duties as assigned.
Facilities/building Responsibilities (20%):
- Assist in the maintenance of buildings and facilities as needed.
- Performs minor plumbing maintenance, if needed.
- Assist in troubleshooting of HVAC systems.
- Assist in troubleshooting of Boiler systems.
- Monitor facilities for any repairs and improvements.
- Performing other duties as assigned
Qualifications:
- High School Diploma or GED equivalent.
- Must have a valid US Driver's license and reliable vehicle.
- Formal training (certification) in a mechanical-industrial-related trade preferred.
- Strong engineering/mechanical background.
- Basic pneumatic, hydraulic, conveyor, and electrical experience and prior work with PLCs.
- Prior maintenance experience in a food manufacturing setting is preferred.
- Experience with HVAC systems.
- Possess basic knowledge of OSHA and Food Safety regulations.
- TIG/MIG welding knowledge and experience
- Prior experience with form-fill-seal machines and bottling machines.
- Strong written and communication skills.
- Continuous improvement mindset.
- Must be able to work rotational on-call assistance for emergencies.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
