Engineering Jobs in None, AL

We’re Hiring: Boiler & Turbine Systems Subject Matter Specialist | Mobile, AL (Preferred)

Are you a proven technical leader in industrial steam and power generation systems? Our team is seeking a Boiler & Turbine Systems Subject Matter Specialist to serve as our top authority on boiler, HRSG, turbine, condenser, and steam‑system design and performance. This is a high‑impact role supporting major industrial and pulp & paper utility operations.

What You'll Be Doing

Job Scope: The Boiler & Turbine Systems Subject Matter Specialist serves as the organization’s top technical authority for industrial steam and power‑generation systems, providing expert guidance on boiler, HRSG, turbine, condenser, and steam‑system design and sizing. This role leads thermal cycle modeling, equipment specification, and system integration for both new installations and major upgrades across industrial and pulp‑and‑paper utility operations. With extensive experience in boiler and turbine projects—and preferably OEM exposure—the specialist ensures robust, efficient, and reliable power‑and‑steam solutions across the facility.

Primary responsibilities will include but are not limited to:

• Extensive boiler and turbine projects experience across FEL/FEED through detail design and start‑up support (cogeneration/CHP, new installs, retrofits, and debottlenecking).
• Proven ability to perform and stamp/lead core calculations and deliverables: heat & mass balances, Rankine/Brayton/combined‑cycle analysis, steam/water balances, duty/flow/pressure sizing for boilers, HRSGs (single/multi‑pressure, with/without duct firing), steam turbines (backpressure & condensing), gas turbines integration, and condenser selection/sizing (duty, approach, vacuum, CW options, air‑cooled vs. water‑cooled).
• Steam system design & controls: header configuration and pressure‑level strategy, letdown/PRV stations, desuperheating/attemperation, bypass/relief and PSV sizing, condensate return, DA/feedwater systems, and overall mill steam stability and turndown.
• Creation/review of PFDs/P&IDs, equipment datasheets/specs, control narratives, and commissioning plans; vendor bid technical evaluations and lifecycle cost comparisons.

Ideal Background

Education: B.S. in Mechanical, Chemical, or Power Engineering; P.E. is preferred but not required.

Experience: 20+ years in industrial boiler/HRSG/turbine project engineering for mill utilities, power islands, or CHP.

Required Knowledge, Skills, and Abilities:

• Codes/standards and typical methods: ASME BPVC Section I, ASME B31.1, HEI condenser standards, API 611/612, API 616, TEMA, NFPA 85, and ISA valve/control practices.
• Strong working knowledge of Thermoflow (e.g., THERMOFLEX/GT PRO/STEAM PRO), or equivalent cycle modeling tools; familiarity with AFT Fathom/Arrow or PIPE‑FLO for hydraulic calculations; proficiency with Excel‑based sizing sheets and data reconciliation.
• Practical integration on pulp & paper power islands and mill utility systems (e.g., steam ties to paper machines, recovery/power boiler interfaces, load swings, islanding strategies, and balance‑of‑plant impacts).

Physical Requirements:

• Ability to lift and carry in excess of 25 lbs.
• Ability to sit, stand, or walk for long periods of time

#LI-BH1

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects.

About LJC

LJC Design & Engineering is a full-service architecture, engineering, and design firm committed to enhancing the quality of the human experience through integrated design. We are a team of high-energy professionals who share a passion for design, a collaborative approach, and a casual culture. We solve challenges by leveraging the collective expertise and ingenuity of the best and brightest minds across development, design, and constructions such as food & beverage, consumer products, manufacturing, and life-science products.

The Role We Want You For

As Advanced Manufacturing Market Leader you will have overall responsibility for market P&L, strategic market direction, project development, sales campaigns, client relations, organizational development, and contract negotiations. This is a senior leadership role allowing you to have a real impact on shaping and transforming the advanced manufacturing market sector, by leveraging a differentiating engineering expertise to result in the develop and execute of complex EPC and design-build projects.

The Specifics of the Role

• Develop short and long-term strategic and tactical business plans in alignment with enterprise objectives.
• Develop and execute client development and sales strategy to achieve business goals. This strategy shall focus on both sourcing and building new client relationships as well as maintaining and expanding existing relationships.
• Act as a Clayco account leader, ensuring client satisfaction for future opportunities and expanded services near term. Work to resolve challenges that may arise to keep the client happy during the execution phase.
• Work closely with senior executives across engineering, procurement, and construction businesses, ensuring maximum exposure of the Company’s capabilities and the presentation of those capabilities when appropriate.
• Participate in the development of the Design & Engineering practices by providing technical assistance, subject matter expertise and industry regulatory insight to ensure client satisfaction and compliance.
• Own P/L (profit/loss) results for the Market Segment and work directly with CFO on sales projections, project forecasts and Market Segment budgets.
• Provide guidance to the project team(s) on how to maintain efficient execution processes within a dynamic and ambiguous environment, with limited information, including documenting and communicating design assumptions internally and with the client.
• Work within a matrix environment to communicate and coordinate resource needs.
• Establish and develop trusting third party OEM relationships in alignment with the Market Segment
• Recruit, Mentor, and develop Design Project Management staff fostering collaboration and proper behavior.
• Work closely with senior executives on all complex project and contract negotiations including full-scope EPC services and other Design & Engineering related services.
• Your success in this role will be measured by your ability to win new business, enhance client satisfaction, deliver outstanding project outcomes, and scale the business through acquiring new customers, expanding services, and exploring new opportunities.

Requirements

• Bachelor’s Degree in a related Engineering discipline, Construction Management, or other related technical degree; or significant field experience that has evolved into leadership roles over time.
• 20+ years of progressive experience in EPC delivery of advanced manufacturing projects, with a strong track record managing individual projects valued at $250M or more.
• Technical Expertise: Deep understanding of construction costs and cost drivers, both at the project and unit level. Proficient in contract negotiation and administration.
• Leadership Skills: Proven ability to lead large, cross-functional teams, with a focus on mentoring and developing talent. Strong ability to navigate complex challenges, resolve conflicts, and motivate teams to achieve exceptional results.
• Business Acumen: Entrepreneurial drive with a passion for business development, coupled with a keen understanding of customer decision-making processes.
• Communication: Strong verbal and written communication skills, with the ability to deliver impactful presentations and build consensus across internal and external teams.
• Problem-Solving: Ability to break down complex problems into manageable components, identify core issues, and develop innovative solutions. Skilled in prioritizing critical details and managing multiple projects concurrently.
• Attention to Detail: A meticulous approach to scope management and cost control, ensuring accuracy in all aspects of project execution.
• Strategic Thinking: Demonstrated ability to anticipate future trends, adapt to changing circumstances, and continuously seek ways to improve project outcomes and client satisfaction.

Some Things You Should Know

• Our clients and projects are nationwide – Travel will be required.
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!

Why Clayco?

• 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2025 ENR Midwest – Midwest Contractor (#1).
• 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3).
• 2025 ENR Top 25 Data Center Builders – Data Center Contractor (Top 3).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Description

The Defense Systems Sector at Leidos currently has an opening for a nightshift Environmental, Health & Safety (EH&S) Engineer to work in our Huntsville, Alabama office. This is an exciting opportunity to use your experience to join a diverse team to create unique solutions for complex problems. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos Defense Systems Sector provides responsive, cost-effective engineering and scientific solutions  

Primary Responsibilities:

The EH&S Engineer will assist leadership to assess and resolve safety issues by identifying risks, and by implementing controls, policies, and programs. Candidate will identify training opportunities and help develop presentations to ensure employee awareness of EH&S programs, initiate corrective actions and stop operations where necessary. The EH&S Engineer is expected to perform with minimal supervision and successfully interact with all levels of Leidos personnel to facilitate EH&S program and policy implementation.

Responsibilities include, but are not limited to:
•    Performing EH&S surveys and worksite audits to ensure Safety and Environmental compliance.
•    Perform risk assessments to ensure regulatory compliance and proactively monitor and document EH&S program implementation.
•    Working with leadership to identify, track, and resolve EH&S issues.
•    Performing accident investigations.
•    Assignment and distribution of Personal Protection Equipment (PPE) and Safety equipment.
•    Coordination of Hazardous Waste Management.
•    Maintain environmental permitting, such as air quality permits, stormwater permits, etc.
•    Safety Data Sheet (SDS) database management.
•    Training of personnel in relation to safety and environmental requirements and controls.
•    Perform Job Safety Analysis (JSAs) for hazardous operations.
•    Perform research in relation to various safety and environmental subject matter.
•    Maintain current knowledge of safety legislation and regulations.

Basic Qualifications:

Position requires a BA/BS degree from an accredited university in a biological, physical, or environmental science related field. In lieu of degree, High School Diploma/GED with a minimum of 5-years experience in a Safety related field is required.

•    Excellent communication skills, both verbal and written.
•    Ability to multitask and prioritize tasks.
•    Candidate must effectively communicate within a team environment.
•    Candidate must have computer skills including experience with Microsoft Office. 
•    Candidate must be able to lift up to 35 lbs.  
•    Candidate must be a resident of the Huntsville, AL or North Alabama area or be willing to relocate to the area.

Must be a US citizen and able to obtain and maintain a US DoD security clearance.

Preferred Qualifications:

BS in EH&S or related discipline.
CIH, CSP, CHMM certifications.
Some travel between facilities may be required.

If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.

For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

About Leidos

Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit and Benefits

Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at Your Data

Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at

If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission.

Commitment to Non-Discrimination

All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The PCAS department is seeking an software, embedded control engineer for algorithm development and implementation in a variety of electromechanical control assemblies. 

What You Will Do

• You will help design, implement and verify motor control embedded firmware designs for current and future Control Actuation Systems.

• You will implement digital control algorithms in C/C++ in conjunction with the Controls and Algorithms team.

• Additionally, you will interact with mechanical and electrical design engineers and vendors to optimize hardware designs.

What You Will Learn

• You will have the opportunity to perform hands-on hardware and firmware integration and verification testing in a laboratory environment. 

• Solid understanding of C/C++ development, experience with MATLAB/Simulink and the ability to work with electrical and mechanical hardware. 

• You will have the opportunity to mentor early career engineers.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.

• A minimum of 8 years of experience in code design, development and/or verification.

• Ability to obtain and maintain a US security clearance prior to the start date.  U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Value

• Experience with C/C++ development on any embedded hardware platforms.

• Experience with model development and data analysis in MATLAB/Simulink

• Experience of developing firmware or software for safety significant environments including requirements development and traceability, design decomposition and documentation, static code analysis, design to safety critical coding standards such as MISRA-C, test case development, code coverage including modified decision/code coverage (MC/DC), code coverage analysis and formal qualification testing.

• A working understanding of configurable logic (FPGA firmware) and VHDL.

• Experience implementing digital control algorithms in hardware including embedded microcontrollers, digital signal processors, FPGAs and a working understanding of serial communication interfaces, analog to digital converters, and PWM generators.

• Experience working with and integrating hardware.

• Basic understanding of modeling and controls of electric motors and solid background in PMSM motor fundamentals

• Digital and analog signal electronics design, development and verification.

• Use of software/firmware configuration management tools such as GIT, Subversion or similar tools

• Strong verbal and written communication and ability to work hands-on in teams.

• Basic proficiency with model development and data analysis in MATLAB/Simulink

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

System Safety / Human System Integration (HSI) Department ensures our products Safety and Human Factors disciplines are incorporated into all our engineering and program execution to provide for our customers critical needs. Location: Huntsville, AL

What You Will Do

This is an exciting opportunity for a highly motivated Senior System Safety Engineer to join our team in Huntsville, AL.

• Lead one or more MIL-STD-882E compliant system safety programs

• Perform MIL-STD-882E System Safety Program tasks and analyses, or customer’s approved equivalent

• Coordinate with customer safety representatives to gain safety approval from appropriate Safety Review Board authorities

• Work across all integrated product teams and lines to properly eliminate hazards or provide effective controls.

• Collaborate with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds

• Perform System Safety Program, Hazard analyses or Design analyses

• Brief safety of the program at technical reviews and as part of the safety approval process

• Interpret system requirements, customer specifications and military standards

• Prepare internal and customer reports describing various analyses relevant to the System Safety program

• Collaborate across multiple disciplines to gain a full understanding of product architecture and design

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with System Safety Engineering, Systems Engineering, Software or Firmware Engineering, Electrical Engineering or equivalent Safety Engineering. 

• The ability to obtain and maintain a U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Experience in weapon combat systems, specifically missile system safety experience

• Experience with DoD System Safety Programs

• Experience with Earned Value Management Systems (EVMS) and Proposal Development

• A Master’s degree in Science, Technology, Engineering or Mathematics (STEM).

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires the ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• Relocation Eligible

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.

The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.

Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.

This position is 100% onsite in Huntsville, Alabama

What you will do

• Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
• Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.
• Perform pin crimping, wire routing, and use hand and powered tools.
• Test and troubleshoot systems using multimeters and other diagnostic tools.
• Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.
• Perform physical tasks such as retrieving, storing, and installing equipment.
• Work from detailed assembly drawings, schematics, or work instructions.

• Work from verbal instructions and conceptual ideas to a achieve a desired output.
• Recognizing failures and isolating problems and suggesting appropriate corrective action.
• Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.
• Manage inventory, paperwork, and maintain organizational standards.

Qualifications You Must Have

• High School Diploma or equivalent (GED) and A minimum of 2 years of work experience.
• Assemble and configure rack-mounted test systems, cables, and harnesses
• Verification/Inspection experience with associated standards, processes, and documentation.

Qualifications Preferred

• Work experience with mechanical and soldering standards, processes, and documentation.
• Experience working within an Engineering Technical Support Environment.
• Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
• CCA manufacturing experience.
• Knowledge of Fabrication Standards, Processes, and Documentation.
• IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications
• Associates Degree in a Technical field.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon Missiles & Defense, you have the opportunity to try new things and make a bigger difference across a broader end-to-end solution, a richer technology and product set, an expanded range of disciplines, a growing global footprint and a more diverse team of colleagues and customers.

An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.

The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.

Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.

This position is 100% onsite in Huntsville, Alabama

What you will do

• Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.

• Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.

• Perform pin crimping, wire routing, and use hand and powered tools.

• Test and troubleshoot systems using multimeters and other diagnostic tools.

• Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.

• Perform physical tasks such as retrieving, storing, and installing equipment.

• Work from detailed assembly drawings, schematics, or work instructions.

• Work from verbal instructions and conceptual ideas to a achieve a desired output.

• Recognizing failures and isolating problems and suggesting appropriate corrective action.

• Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.

• Manage inventory, paperwork, and maintain organizational standards.

Qualifications You Must Have

• High School Diploma or equivalent (GED) and A minimum of 4 years of work experience.

• Assemble and configure rack-mounted test systems, cables, and harnesses

• Verification/Inspection experience with associated standards, processes, and documentation.

Qualifications Preferred

• Work experience with mechanical and soldering standards, processes, and documentation.

• Experience working within an Engineering Technical Support Environment.

• Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.

• CCA manufacturing experience.

• Knowledge of Fabrication Standards, Processes, and Documentation.

• IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications

• Associates Degree in a Technical field.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Effector Digital Products Department is seeking an electrical engineering leader with experience in engineering management, design, test, and integration. The Section Leader will utilize advanced technical knowledge in FPGA/ASIC Design/Verification and/or Digital CCA Design, and an understand the impact of this work on other areas of the organization.

The candidate will work with section members to provide career guidance, performance feedback, and technical leadership to enable the employee for success. Responsibilities will be split between supporting program(s) as an engineer (~90%) and providing functional leadership to the section (~10%).

What You Will Do

• Manage a section of 15 to 20 engineers.

• Provide career and technical mentoring

• Lead functional and cross-disciplinary teams to meet organizational goals and project needs

• Support hiring (resume reviews, interviews, etc.)

• Elicit and compile performance feedback to support Performance Development

• Hold required formal Mid-Year and Year-End Performance Development (PD) discussions where compiled feedback, key strengths and development needs are conveyed

Engineering Responsibilities to Anticipate

• The engineering responsibilities for this position could support Digital CCA and/or FPGA/ASIC technologies within the Effector Digital Products (responsibilities align to your field of expertise).

• Design and deliver production quality FPGA releases from initial proof of concept up to production

• Architect FPGA-based systems to determine parts, interfaces, and Concept of Operations (CONOPS)

• Translate system level requirements into FPGA requirements

• Design and code in VHDL for reliability and maintainability

• Verify designs utilizing self-checking techniques with directed and constrained random tests, while tracking functional and code coverage

• Demonstrate technical expertise in digital signal processing, FPGA/ASIC design/verification, CCA design, integration and test of radar hardware, and/or system architecture

• Lead functional or cross-disciplinary teams to meet organizational goals and project needs

• Design, analysis, simulation, test, and integration of digital electronic modules and/or CCAs for Missile applications

• Circuit card design including hardware designs with processors, FPGAs, memory, and industry interfaces, such as PCIe, Ethernet, I2C, SPI, and UART 

Qualifications You Must Have

• Typically requires a Bachelor's Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• The ability to obtain and maintain a US security clearance prior to the start date.

• Minimum of ten (10) years of professional, applicable experience to include at least two (2) of the following:

• FPGA or ASIC design

• FPGA or ASIC verification

• Integration and test of missile/FPGA hardware or system architecture

• Digital signal processing

• ​Digital CCA Design

Qualifications We Prefer

• Master of Science (MS) in Electrical Engineering or Computer Engineering

• Experience serving as a Responsible Engineering Authority (REA), Control Account Manager (CAM), and/or Integrated Product Team Lead (IPTL)

• Failure investigation, root cause identification, and corrective action implementation

• Development of technical proposals, engineering project estimates, and/or white papers

• Requirements verification test planning and execution

• Experience creating and presenting professional level design documentation to company leadership and program customers

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

This position is eligible for relocation.

Location Information

Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?

Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

This position is 100% on site in Huntsville, AL

Job Description:
This position is for a Principal Design Engineer. If you enjoy working with hands-on multidiscipline teams, the Test Solutions Engineering Center (TSEC) is interested in hearing from you.

The Test Solutions (TS) Effectors Center (TSEC) within the Hardware Engineering Discipline is a multi-discipline organization responsible for developing Production and Engineering test equipment solutions for all Raytheon products. We are hands-on designers using the latest technology and tools and integrating state-of-the-art software solutions with the most advanced engineering systems in the world.  TS products are in engineering labs, in the field, and in factories and production testing environments utilized for testing weapon system products. TS has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment.

This Principal Engineer hardware position is focused on supporting and driving the design, development, integration, and maintenance of electronics as a part of on-site factory support of test systems to support weapon system product development and deliveries. The selected candidate will support and drive the development of electrical designs, Interconnect designs, electrical system analysis and integrated development environment specified by the factory solutions and the TSEC organization.

What You Will Do:

• Prioritize and handle several engineering tasks concurrently
• Lead small teams of Electrical Hardware design engineers in support of complex cabling, test chassis or test system solutions
• Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis
• Lead the troubleshoot of hardware and test equipment instrumentation in Factory Test Platform solutions
• Work and coach/lead in a multidiscipline engineering team environment 
• Interact and engage with Engineering, Operations PTEs, and program personnel to support factory readiness and robustness 
• Support the development and derivation of requirements for hardware and electrical products

Qualifications You Must Have: 

• Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 8 years of prior relevant experience, or an Advanced degree and minimum of 5 years’ experience in a related field.
• Eight (8) years of experience with electrical engineering design to include troubleshooting, analysis, and test
• Experience using schematic capture tools and interpreting schematics
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer: 

• Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic
• Experience in factory/laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters)
• Experience developing Production Test Equipment in an Automation environment
• Introduction or experience with computer architecture and computer hardware optimization techniques
• Introduction or experience in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422
• Experience performing analog, digital, and/or RF design
• Experience designing, testing, and integrating digital, mixed signal, and electrical system interconnect
• Experience utilizing integrated development environments and debugging tools to troubleshoot software
• Working understanding of the TEE One Page Process. 
• Introduction or experience with Microsoft Azure DevOps Server or GitHub

What We Offer:
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Learn More & Apply Now:
Please consider the following role type definition as you apply for this role.  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires onsite work in Huntsville, AL: ,-al-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

What You Will Do:

As a Sr. Production Test Engineer (PTE) you’ll support both the manufacturing test teams and the program they are assigned to support across all make centers where testing is performed and you’ll cover all phases of the product life cycle, including product development, transition to production, sustained production, depot activities and end of contract equipment closeout and dispositioning.

In this role, you’ll support creation of Basis of Estimates (BOE) to estimate costs to add additional capacity, new capabilities and equipment obsolescence and you’ll ensure compliance of the prime hardware to technical data package requirements and supporting test equipment.

Responsibilities to anticipate: 

• Creation and maintenance of the program test equipment obsolescence plan.
• Overall capacity plan for test equipment.
• Supporting make center PTE’s to reduce test time, improve the test process through preliminary investigation and problem resolution of trends, failure modes and test yields.
• Developing test flows and contributing to test capacity analysis.
• Maintaining changes to the test equipment technical data package including drawings, test instructions, test position manuals and system software.
• Assisting in non-routine fault isolation, diagnosis and repair of the product or test equipment.
• Leading root cause and corrective action investigations and presenting findings.
• Performing risk assessments and supporting program risk register reviews.
• Leading projects.

This is a 2nd Shift Job.

This job is posted as ONSITE, and is based at Raytheon’s Huntsville, AL facility.

Qualifications You Must Have: 

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and minimum 5 years prior relevant experience
• Experience working in a manufacturing production environment
• The ability to obtain and maintain a Bureau of Alcohol, Tobacco, Firearms and Explosives Access (ATF) clearance.
• Ability to obtain interim Secret U.S government issued security clearance is required prior to start date

Qualifications We Prefer: 

• Experience with interpretation of technical documentation
• Experience with data analysis
• Experience with hands-on hardware integration and troubleshooting
• Experience with technical writing
• Excellent interpersonal, written and verbal communication skills
• Ability to multitask in a fast-paced environment 
• Ability to develop sustaining solutions to routine technical problems

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. 

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Security Clearance FAQs - United States Department of State

• This position is an onsite role – Huntsville, AL: ,-al-location

• We Are RTX

We Are RTX - YouTube

• #LI-ONSITE

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Integrated Solutions, Modeling, and Architecture (ISMA) directorate assesses, develops, and evaluates solution architectures for our customers’ largest, most complex challenges across all the operational domains. In the Operations and Mission Analysis Department you’ll be part of a special team that analyzes the world’s most challenging threats and helps define new capabilities to counter them, pushing the boundaries of innovation, and leading the industry in operational modeling and simulation using our purpose-built software. 

Raytheon’s Huntsville Operations Research Team is currently seeking a Senior Systems Engineer / Operations Research Analyst.  This is an onsite role in Huntsville, AL. 

What You Will Do

• Support the design, development, and application of medium-fidelity digital simulation software in advanced technical computing environments.

• Contribute to system modeling, mission and engagement-level simulation, and data analysis to assess system performance, effectiveness, and survivability across operational scenarios.

• Develop and implement analytical approaches to support mission trade studies, performance evaluations, and system design decisions, ensuring alignment with defined requirements.

• Provide modeling and analysis support across the product lifecycle, including early concept development, system maturation, and new business activities.

• Collaborate within cross-functional teams, integrating inputs from programs, customers, and subject matter experts to generate defensible data that informs technical and programmatic decisions. 

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience. 

• This position requires a combination of education and work experience, including these options:

• Experience using C/C++.

• Experience using numerical computing environments, e.g., JMP, MATLAB, or Excel

• The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Master’s degree in operations research, Computer Engineering, Computer Science, Physics, Electrical Engineering, Industrial Engineering, or Math preferred

• Experience with statistical and data analysis and commercial data analysis software packages

• Experience creating time-based models and simulations (not CAD/solid modeling)

• Military Operations Analysis, wargaming, Modeling & Simulation experience in the defense industry, and/or data analysis & visualization.

• Experience using Linux computing environments Experience in Software requirements development, design, integration, and test

• Experience communicating and interacting with government counterparts

What We Offer 

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. 

Learn More & Apply Now! 

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Huntsville, AL: ,-al-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Performs manufacturing engineering tasks under minimal guidance that are varied and complex, which require troubleshooting and interpreting data. Develops and implements new test methods or manufacturing processes purpose of reducing costs and improving efficiency.

Job Responsibilities

1. Performs a variety of engineering assignments to develop and implement production/processing methods and controls to meet quality standards in a cost efficient manner
2. Provides liaison support between the engineering department and manufacturing
3. Recommends and implements improvements and/or modifications for sequence of operations, equipment utilization and related matters
4. Monitors assigned operations to assure compliance with current project schedules and approved quality standards
5. Makes recommendations regarding the purchase or building of new equipment or modernization of existing production/processing equipment
6. Recommends design modifications or process changes during design of new products
7. Evaluates current technologies for cost reduction and for product and production improvement; check and approve drawings/designs, standard work as well as develop new systems
8. Manages the install of new tools, fixtures, and equipment into the facility.
9. Monitors and supports facility metrics for safety, quality, delivery and cost
10. Performs other duties as assigned

Job Skills Requirements

• Extensive knowledge of engineering concepts, practices and procedures engineering standards and systems
• Comprehensive knowledge of manufacturing production/cell development
• Ability to read and interpret computer aided drawings and prints
• Ability to manage projects
• Strong interpersonal skills to interact with and motivate a diverse group of people
• Strong written and verbal communication skills
• Fluent in English and primary language used in area of responsibility and/or location

Education

Bachelor's Degree in Engineering or Related field

Experience Requirements

• Five years of engineering experience in a high-volume manufacturing environment

Physical & Environmental Requirements

Briggs & Stratton, headquartered in Milwaukee, Wisconsin, provides innovative products and diverse power solutions to help people get work done. Briggs & Stratton is the world’s largest producer of engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of lithium-ion battery, standby generator, energy storage system, lawn and garden, turf care and job site products through its Briggs & Stratton®, Vanguard®, Ferris®, Simplicity®, Snapper®, Billy Goat®, Allmand®, SimpliPhi®, Branco® and Victa® brands. Briggs & Stratton products are designed, manufactured, marketed and serviced in more than 100 countries on six continents.

Job Title: Assembly Engineer

Location: Cullman, Alabama

Industry: Manufacturing / Automotive / Industrial Equipment

Local Candidates Only – No Relocation Assistance Available

About the Role

The Assembly Engineer is a hands-on manufacturing engineering role critical to the successful installation, trial, and launch of assembly equipment at our Cullman, Alabama facility. This position plays a key role in bridging design, production, quality, and external contractors to ensure equipment readiness, robust process flow, and consistent part quality during line trials and production ramp-up.

This role supports both domestically and internationally sourced equipment, including close collaboration with Japan-based engineering teams. The Assembly Engineer will spend significant time on the production floor while also contributing to equipment layout planning, process flow design, and continuous improvement initiatives.

Travel—both domestic and international—as well as availability during off-hours and weekends is expected during launches and other critical production events.

Key Responsibilities

• Lead and support installation, commissioning, and validation of assembly equipment
• Plan, schedule, and independently run line trials and launch activities
• Serve as the primary technical liaison between design engineering, production, quality, and external vendors
• Ensure equipment readiness, process stability, and part quality during trials and ramp-up
• Troubleshoot mechanical and process issues on the production floor in real time
• Support equipment layout development and manufacturing process flow optimization
• Coordinate with Japan-based teams on equipment build, delivery, and launch readiness
• Drive continuous improvement initiatives related to safety, quality, delivery, and cost

Qualifications

• Bachelor’s degree in Engineering (Mechanical, Manufacturing, Industrial, or related) preferred; equivalent hands-on experience strongly considered
• Practical experience with assembly equipment, line trials, and manufacturing launches
• Strong mechanical aptitude and structured problem-solving skills
• Ability to work independently and lead trials in fast-paced, high-visibility environments
• Effective cross-functional communication skills, including vendor and international collaboration
• Willingness to travel and support off-shift/weekend activities during launches
• Must be local to the Cullman, AL area or able to commute without relocation assistance

What We’re Looking For

The ideal candidate is a detail-oriented, hands-on manufacturing engineer or senior technician who thrives on the production floor. Formal engineering credentials and advanced automation experience are beneficial, but success in this role is driven by practical assembly experience, equipment integration knowledge, and the ability to lead under launch conditions.

The Director of Operations will oversee F&B and Rooms Operations for a 99-room hotel. The Department Leaders for Rooms and F&B will report directly to the Director of Operations responsible for maximizing profits, employee engagement and guest satisfaction. 

Key Responsibility

Operational Oversight

• Supervise & manages team members of all day-to-day operations. Has the ability to fully understand all positions well enough to perform all duties in team members’ absence.
• Upholds Ithaka Hospitality Partners standards of excellence throughout all guests’ interactions.

Guest Satisfaction

·      Monitor, observe, and measure guest’s restaurant experience.

·      Ensure guests are satisfied with the food and service. Respond promptly and courteously to any requests and ensure team is trained properly to handle guest requests/issues

·      Works closely with the Rooms Leadership team to train, develop, mentor team members and ensure front office team delivers gracious and thoughtful service.

·      Work closely with the housekeeping and engineering teams on daily operations, defect reduction, preventative maintenance, and quality improvements. 

·      Respond to guest reviews on social media platforms and IHP guest satisfaction surveys. 

Training & Development

·      Ensure execution of daily 'huddles' to keep staff informed of pertinent information.

·      Plan and deliver monthly departmental meetings.

·      Ensure support for supervisors to maintain excellent service and quality standards. Interview, select, train, supervise, counsel, and discipline outlet(s) supervisors and staff.

·      Work in coordination with Ithaka Leadership to create and maintain a written training program and all team members trained through Schoox.

·      Work closely with the team on continuous training through various training sessions.

·      Regularly reviews, evaluates and train on customer satisfaction of the hotel to recommend new operating policies.

Financial Management

·      Review and respond to daily revenue reports, recaps, etc. for the hotel and outlets. 

·      Ensure Forecasts are reviewed, and daily revenue reports are updated with accurate budget and revenue goals.

·      Ensure Outlet Requisitions are submitted within a timely manner as needed for all food items using our in-house ordering systems.

·      Analyze Point of Sale data, departmental budgets, and financial data to ensure we are maximizing sales and profits, understanding food and labor costs.

·      Review daily labor reports to ensure efficient operations without compromising the guest experience. 

·      Work closely with the revenue management team to maximize revenue opportunities for the hotel.

·      Work closely with the General Manager on monthly and annual forecast and budgets.

Menu Development

·      Work in coordination with the Restaurant General Manager, Kitchen Manager and Culinary Creative Director on seasonal updates to food & beverage offerings.

·      Administer verbal and written testing to FOH team. Lead a daily pre-service huddle to properly communicate to the service team special reservations, dietary restrictions, changes to food and beverage menu items, and expectations of the service ahead.

Quality Assurance

·      Work closely with outlet leaders to ensure the restaurant is operated in a neat and clean manner, and ServSafe and local health code standards are met.

·      Receive a score of 98 or higher on all health inspections.

·      Ensure maintenance on all equipment is taking place proactively following manufacturer’s recommended PM schedules and repair services are coordinated as needed.

·      Monitor, develop and maintain goals using the 4 Disciplines of Execution Processes. 

Flexibility

·      Team members must have a flexible work schedule and ability to work nights, weekends and holidays

·      Contribute to the instruction and training of coffee service in other departments (banquets, restaurant, IRD).

·      Assist IHP Leadership with forecasting roasted coffee needs and growth predictions.

Software Knowledge

·      Develops and oversees service team members and student schedules using ADP. Ability to learn and use ADACO daily for purchasing, receiving and inventory. Ability to learn and use Agilysys Point of Sale and restaurant reservation systems.

·      Ability to learn and use Opera Cloud PMS.

·      Ability to learn and use KYC Hotel Optimization Software.

·      Ability to learn and use Franklin Coveys 4DX Operating System. 

Qualifications

·       Three (3) or more years’ experience in hotel leadership roles. 

·       Complete understanding of Forbes, AAA service standards and able to implement and execute them in a casual upscale environment.

·       Experience in an upscale casual restaurant environment

·       Bachelor’s degree in hospitality or related subject matter, preferred

·       Minimum twenty-one (21) years of age to serve alcoholic beverages.

·       Background in both FOH and Culinary preferred.

·       Understands and maintains a complete knowledge of all menus, all ingredients, and all techniques.

Working Conditions

·       Must be able to work on your feet for long periods of time.

·       Fast paced movements are required to go from one part of the restaurant to another.

·       Must be able to move, pull, carry, or lift at least 35 pounds.

·       Occasionally kneel, bend, crouch and climb as required.

·       Must be able to stand, walk, lift, bend and climb stairs for long periods of time.

·       Must be able to bend, stoop, lift, reach, push, twist, walk, crouch, and squat

POSITION SUMMARY: CAD Designer/Draftsman

RESPONSIBILITIES & EXPECTATIONS:

• Produce customer general arrangement drawings. Produce fabrication drawings, including dimensioning, weld specifications, and machining tolerances for shop use. Checking of drawings produced by other designers. Perform design analysis as requested.

• Interaction and Communication with persons, internal to and outside of the company, and vendors, with regard to drawings, design information, project management, fabrication support, installation support, and general customer support. Participate in meetings and conference calls as needed.

• Clear and Effective Communication Skills - Create supporting documentation for as-built designs. Experience with Microsoft Outlook, Word, and Excel. Create drawing release transmittals and manufacturing orders for the fabrication and machine shops. Create requisitions, bills of materials, and parts orders. Print and store drawings. Assist in the creation of job specific operation and maintenance manuals.

• Perform any other work as assigned by your supervisor

o Perform all tasks in a timely and efficient manner.

o Work effectively – alone and with other team members as required.

o Strive to meet customer and company expectations of quality and engineering design standards.

ATTRIBUTES: What are the Essential Knowledge/Skills/Abilities for this position?

• Experience in machinery design and drafting practices.

• Knowledge and ability to use Autocad for the detailing of customer arrangement drawings, shop fabrication drawings, checking and validation, load/lifting diagrams, and BOM’s. Having 3D experience is beneficial but not necessary.

• Knowledge of machining practices and tolerances, and welding principles.

• Ability to prioritize and multi-task in order to meet specific deadlines.

• Excellent organizational and communication skills.

• Problem solving skills with simple and logical solutions.

• Mechanically inclined.

Job Demands include, but are not limited to:

• Must be physically able to perform work assigned. Must be able to perform field measuring tasks which can include climbing ladders and stairs, entering into confined spaces, as well as extreme temperature, humidity, etc.

• Must have or be able to obtain MSHA and OSHA safety certification.

• Ability to work overtime if needed. Can be after hours and/or weekends.

• Limited travel - typically less than once per month with durations of 1 to 3 days. Must have a valid credit card and driver’s license for use with travel - company will reimburse all valid expenses.

Oversees and directs the planning, budgeting, coordination, and inspection of all architectural, construction, and demolition activities involving City-owned buildings, structures, amenities, properties, and infrastructure. Reviews and approves construction, demolition, and modification projects to ensure compliance with all applicable Federal, State, County, and City laws, codes, and ordinances. Provides leadership and supervision to a team of architects, project managers, drafters, aides, and administrative personnel. Work is conducted in both office and outdoor environments and performed under the supervision of the Director of Capital Projects by appointment of the Mayor.

Essential Functions:

Participation or Reporting Requirements for Committees, Boards, and Commissions

• Planning Commission
• Design Review Committee

Review and Approve

• Pay Estimates/ Invoices for Consultants, Vendors and Contractors
• Public building construction, renovation, and major repair projects within the City

Consultant Management

• Identify need for consulting services
• Prepare scope of work and scope of services

Public Complaint Investigations

• Noise, Odor and Dust from Construction Projects
• Complaints regarding physical condition of facilities including presence of hazardous materials

Develop and Manage

• Grant Applications and Grant Management /Reimbursement Requests
• Departmental I Architectural Division Budget

Agency Coordination

• Jefferson County and other surrounding Municipalities
• State of Alabama--ADEM,ADECA

Emergency and After Hours Duties

• Attend Neighborhood and Community Meetings
• Attend Project and Program related Public Involvement Meetings

Capital Improvement Projects

• Development of estimates of probable cost
• Architectural design (in-house or consultant)

Supervision Exercised:

An employee of this class assigns, reviews and evaluates the work of Architects, Project Managers, Drafters, administrative staff, and outside engineering, testing, and architectural consultants.

Work Environment:

Work may expose employee to hazardous construction sites

Physical Demands:

Work may require standing, crawling, stooping, bending, walking on uneven surfaces, and operation of a motor vehicle.

RESPONSIBILITIES & EXPECTATIONS:

Produce customer general arrangement drawings. Produce fabrication drawings, including dimensioning, weld specifications, and machining tolerances for shop use. Checking of drawings produced by other designers. Perform design analysis as requested.

Interaction and Communication with persons, internal to and outside of the company, and vendors, with regard to drawings, design information, project management, fabrication support, installation support, and general customer support. Participate in meetings and conference calls as needed.

Clear and Effective Communication Skills - Create supporting documentation for as-built designs. Experience with Microsoft Outlook, Word, and Excel. Create drawing release transmittals and manufacturing orders for the fabrication and machine shops. Create requisitions, bills of materials, and parts orders. Print and store drawings. Assist in the creation of job specific operation and maintenance manuals.

Perform any other work as assigned by your supervisor

Perform all tasks in a timely and efficient manner.

Work effectively – alone and with other team members as required.

Strive to meet customer and company expectations of quality and engineering design standards.

ATTRIBUTES:

Experience in machinery design and drafting practices.

Knowledge and ability to use Autocad for the detailing of customer arrangement drawings, shop fabrication drawings, checking and validation, load/lifting diagrams, and BOM’s. Having 3D experience is beneficial but not necessary.

Knowledge of machining practices and tolerances, and welding principles.

Ability to prioritize and multi-task in order to meet specific deadlines.

Excellent organizational and communication skills.

Problem solving skills with simple and logical solutions.

Mechanically inclined.

Job Demands include, but are not limited to:

Must be physically able to perform work assigned. Must be able to perform field measuring tasks which can include climbing ladders and stairs, entering into confined spaces, as well as extreme temperature, humidity, etc.

Must have or be able to obtain MSHA and OSHA safety certification.

Ability to work overtime if needed. Can be after hours and/or weekends.

Limited travel - typically less than once per month with durations of 1 to 3 days. Must have a valid credit card and driver’s license for use with travel - company will reimburse all valid expenses.

Preferred Experience: 5 yrs. Mechanical Drafting Experience in an Industrial or Manufacturing Environment

Required Education: High School Diploma

Preferred Education: Technical/Vocational degree in Mech. Drafting or Associates degree in Engineering Technology with CAD experience.

Project Manager - Industrial, Manufacturing, Mission Critical

Location: Birmingham, Alabama

We are partnering with a general contractor to hire a Project Manager to oversee Industrial, Manufacturing, and Mission Critical construction projects. You’ll run projects from day one of preconstruction all the way through closeout - managing budgets, schedules, subcontractors, and client communication while leading teams to successful, safe, high-quality project delivery. If you’re an experienced builder who enjoys ownership, leadership, and problem-solving on complex projects, we’d love to connect.

Responsibilities

• Lead all phases of construction from preconstruction through closeout, ensuring projects are delivered safely, on schedule, and within budget.
• Enforce safety and quality standards; conduct regular site inspections and audits.
• Oversee daily project execution, resolve field issues, and ensure work aligns with plans, specifications, and client expectations.
• Prepare and review estimates, takeoffs, proposals, and subcontractor bids; negotiate and award contracts.
• Manage project budgets, forecasts, change orders, vendor invoices, and owner billing.
• Secure permits and ensure compliance with codes, regulations, insurance requirements, and contract obligations.
• Maintain accurate project documentation, including RFIs, pay apps, schedules, and closeout materials.
• Lead and mentor project teams (PEs, APMs, PMs, Superintendents) and oversee manpower planning and staffing needs.
• Conduct regular OAC, subcontractor, and internal project meetings to maintain alignment and progress.
• Serve as primary contact for clients, design partners, and subcontractors; strengthen relationships and support future business opportunities.

Qualifications

• Bachelor’s degree in Construction Management, Engineering (Civil, Architectural, or related), or equivalent experience.
• 5-7+ years of project management experience
• Proven background delivering large-scale ($50M+) projects from preconstruction through completion.
• Demonstrated leadership, team management, and collaborative communication skills.
• Proficient with construction software and productivity tools (e.g., Procore, Microsoft Office)

Why Join

• Opportunity to lead major builds with a reputable, growing contractor.
• Supportive team culture focused on safety, collaboration, and long-term relationships.
• Competitive compensation, benefits, and professional development opportunities.

Compensation: Competitive salary + vehicle allowance + gas card + performance incentives + benefits (401K, PTO)

We have a contract to direct position for a Machine Design Engineer available. Candidate will be working on the design of automated components, palletizers, conveyor systems, pick/place units, robotics, servos and tooling would be a plus. This position would be working from concept to production. Candidate must have experience with Solidworks. SolidEdge experience will also be accepted. Ideal candidate will have experience in the food processing or food packaging industry. Bachelors degree in Engineering is a plus.

Candidates must be either a US Citizen or Green Card Holder

Account Executive – Defense | Hybrid | Huntsville – Navigation Tech

We’re working with a global navigation and autonomy company already delivering cutting-edge solutions into defense platforms across the U.S. Now, they’re hiring a Account Executiveto drive strategic growth across defense programs.

This role will focus on growing the company’s U.S. defense presence, with an emphasis on land vehicle applications while still covering opportunities across air, sea, and space. You’ll be responsible for driving new business with primes, as well as building long-term partnerships with key defense programs and integrators.

Key Responsibilities:

• Develop and manage relationships with defense primes and integrators.
• Lead capture efforts for U.S. Army and other service programs, with a particular focus on navigation solutions for ground vehicle platforms.
• Identify and qualify new opportunities across defense domains, managing the full sales cycle from prospecting to close.
• Work closely with engineering teams to align solutions with customer requirements.
• Represent the company at industry events, trade shows, and key defense forums.

Key Requirements:

• Business development or account management experience in the defense sector.
• Strong understanding of defense acquisition, ideally with exposure to land vehicle programs.
• Experience selling to Tier 1 / Tier 0 primes.
• Ability to engage both technical and procurement stakeholders with credibility.
• Proactive, growth-minded individual with strong relationship-building skills.

This is a high-impact opportunity for someone looking to take ownership of a key defense portfolio.

Apply now or get in touch directly with Chloe @ EVONA –

I look forward to hearing from you!